Windows Media Player cannot play a particular the Mexico radio station

Similar Questions

• Windows Media Player cannot play the file

  I get the following message appears when you try to listen to a streaming radio station live online.

  Windows Media Player cannot play the file. A network firewall might prevent the player to open the file by using the UDP transport protocol. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:").

  I can listen to other stations, but not this one.  Before about 2 weeks ago, I had no problem getting the live stream.  Has been no change on my computer.  URL is: http://www.wlpv1079online.com/Live%20Streaming%20Page.htm

  Hi Kathy,

  1. what operating system is installed on the computer?
  2. which web browser is installed on the computer?
  3. What is the accurate and complete error message you get?

  Method 1
  I suggest you try the steps from the following link:

  Windows Media Player Error Message help
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D11B6&ContextId=70&OriginalID=C00D2EF9

  Method 2
  If the problem is with a particular station, then I suggest you to contact the support of the radio station.

  Method 3
  I suggest you to disable the firewall and see if the problem still occurs.

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Make sure that you enable the firewall after troubleshooting is completed.

• Windows media player.cannot play theplayer file does not support the file type or might not support the codec used to compress the file

  Windows media player

  HI. When I tried to play a movie in my windows media player.it says windows media player.cannot play theplayer file does not support the file type or does not support the codec that was used to compress the file and when I click web help it lead me to windows media player error message help.you met c00d1199 error message when you use windows media player.

  Hello

  ·         What is the format of the files that you play when you get this error?

  ·         Do you get what this error during playback of all files or a particular file?

  You may encounter this error message for the following reasons:

  1. the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  2 - the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  You can try the steps and check if it makes a difference.

  a. to determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the sections of video codec and Audio codec.

  b. download and install Codecs by clicking on the PLAYER tab and check. To connect to the Internet and automatically download the Codecs of the reader.

• In the error message is Vista "Windows Media Player cannot play the file, might not support the codec used to compress the file.

  It worked very well what place please?

  * original title - Window Media Player cannot drive cannot read the file the player could does not load the file or may not support or does not support the codec used to compress the fichier.*

  Hello

  1. what changes have been made to your computer before the problem?
  2. the problem occurs on a particular file?
  3. What is the format of the file you want to play in Windows Media Player?

  You may encounter this error message for the following reasons:

  (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Windows media player will play only the files and videos only if it supports this type of file.

  Please see the bottom of the article that gives you information on the types of media files that supports Windows Media Player.

  http://support.Microsoft.com/kb/316992

  If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.

  WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the link below for more information on the codec.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

• Error to connect to the webcast - Windows Media Player cannot play the file because a network error occurred. The server may not be available.

  Original title - PROBLEM WITH WINDOWS MEDIA PLAYER

  I tried to view a technical presentation online and this is the error I received; -what it means and how can I fix it?

  Windows Media Player cannot play the file because a network error occurred. The server may not be available. Check that you are connected to the network and that your proxy settings are correct.

  Hi NinaOwens,

  
  1. are you able to view the same content from a different computer?
  2. you get the error only with a particular file or with the majority of them?
  3. during how long have you had this problem?
  4. did you sons of recent change the computer?

  You can see the links below and check if the proxy settings are correctly performed. Also you can check the other links to verify network connections-
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-proxy-settings-in-Internet-Explorer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

   

  I hope this helps.

• My habit of open media, Windows Media Player cannot play the file... »

  Original title: media open habit

  My multimedia files will not open all but a few. When I try to open it it know "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file. "I go to properties it know the file type is"in his (.au) format"I use windows 7 on an HP laptop

  The. The AU file was probably created by a Codec that is not installed on your system. You can use VLC player or any what 3rd party software to play the file. If want to read in Windows Media Player, then find out which is the Codec required to play that particular file. REF: How to find which Codecs you need to play any multimedia file

• Im trying to read a DVD Blue-ray in my new computer laptop and a message saying "Windows Media Player cannot play the DVD.

  Original title: how do peripheral DVD player on my laptop

  Im trying to read a DVD Blue-ray in my new computer laptop and a message saying "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support. and also tried to solve the problems and see them all, then clicked on reading and burning CD and blu - ray discs and message saying could not identify the problem. then I went to windows media dvd player and the message saying that "Windows has no dectet a dvd playback device, if you do not have a dvd playback device, you will need to purchase and install a.. "If do not have a DVD player installed, contact your OEM or device for the latest driver for your particular device" Please can someone help me as its driving me crazy. Thank you

  You must have a third-party program to run Blu - ray discs.

  http://www.arcsoft.com/TotalMedia-Theatre/

  http://www.CyberLink.com/products/PowerDVD/overview_en_US.html?&r=1

  Your new PC must have provided with software to play. Otherwise, I'd contact the manufacturer and see if she did or why it didn't.

• Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Windows Media Player help

  I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Hi Rains27,
   
  1. were you able to play the same DVD sooner?
  2. must arrive with a particular DVD or all of them?
  3. do you have a DVD decoder installed on your computer?
  4. you use starter edition of windows 7?
  5. What is the resolution on your computer?
  6. have you installed a codec on your computer?
  If you have installed a codec on your computer the I suggest you to uninstall the codec.
   
  Method 1:
  Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
   
  Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
   
  Troubleshooting, click View all, and then click Windows Media Player DVD.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
   
  Method 2:
  
  
  
  Play a cd or DVD in windows Media player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
  
  Method 3:
  
  Try to reduce the hardware acceleration again and check if it makes a difference.
   
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click on advanced settings, troubleshoot tab and then click on change settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
  d. click OK and then click Restart now.

  For more information, see this link: thanks and regards:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection.

  "Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output screen protection. Try to install a driver available for your video card. Is the error that keeps popping up. Even after the update driver... now what do I do?

  Hello

  1 did you change on your computer?

  2. not this problem occurs with the particular DVD or with other DVDs?

  3. is the specific issue limited to the DVD?

  4. are you able to play the DVD in the other system?

  Method 1:

  I suggest you follow the link and check.

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Method 2:

  I suggest you follow the link and check.

  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy protection

  http://support.Microsoft.com/kb/2004673

  See also:

  Cannot read DVD

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• My Windows media player cannot play the videos / movies.

  My Windows media player cannot play the videos / movies. When I try to play a video/movie it gives me just the fixed image of the starting part but the sound continues to play. How can I fix it?

  I also tried with VLC media player and all I get is a black screen empty and also the audio continues.
  Help, please
  Thank you.

  Hello
  1. you receive an error message?
  2. What is the file format of videos you're trying to play?
  3. it happens with a particular video or it occurs with all the other videos?

  Method 1:
  Please follow the given link:
  You receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11 (also applies to WMP 12)
  http://support.Microsoft.com/kb/926373

  method 2:
  Update video drivers and check.

  Follow the given link:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:
  Reduce hardware acceleration and check

  (a) with the right button on the desktop and choose personalize.
  (b) click on display settings.
  (c) in the display settings window, click on advanced settings.
  (d) display the Troubleshooting tab.
  (e) click on change settings.
  (f) to reduce hardware acceleration.

• DVD Windows media player cannot play this dvd because it is not possible to activate the ANALOG on the output display copy protection try to install a driver available for your video card

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  =======================================
  What version of Windows are you using?

  The free VLC Media Player may be worth a try...

  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• Get an error "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  * Original title: wrong Region

  Windows Media Player will not play CD - advise

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  Note I am eager to play a CD and it is recognizing a DVD?

  can anyone help

  Hello

  1. what version of Windows is installed on the computer?

  2. what version of Windows Media Player is installed on the computer?

  3. what region is your currently defined DVD player on?

  4. are you able to play other DVDs?

   

  Please follow the provided steps and update us with the results.

  Note: All the steps apply to Windows 7

  Method 1: Try to change the region of the DVD player and check the result. To do this, try the following steps:

  a. Click Start, click computer.
  b. right click on the DVD drive, and then click Properties.
  c. click on the Hardware tab, click the properties button and modify the DVD of the region.

   

  Method 2: Uninstall the DVD player and check.

  a. Click Start, type devmgmt.msc and press to enter.

  b. develop DVD players, right click on the sub element and click on uninstall.

  c. restart the computer and check the result.

  Once you restart the computer, the DVD driver will be loaded automatically.

  d. try to play the DVD and check the result.

   

  You can run the troubleshooting Windows Media Player DVD Troubleshooter and check that it helps.

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Let us know if it helps!

• Unable to play video file error: Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer

  Original title: Windows Media Player shows that the new codecs are required

  Original title: query codec and Media Player re

  Have used windows media player for many years on my dell. Usually to see the videos from Sony handycam. Just downloaded wmediaplayer and recent videos from Camcorder will not open one of the videos.

  The following message is displayed "Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer. »

  As I have not changed anything helpful suggestions please.

  concerning

  The winemaker

  Hello

  1. What is the format of the video file?

  2. what operating system is installed on the computer?

  Method 1: Run the troubleshooter in Windows Media Player on Windows 7 settings:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: You can check if the file format of the music files are supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player

  Note: If you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Method 3: In addition, you can also download & install the necessary codec to play the files.

  For more information, see: Codecs: frequently asked questions

  (For Windows Vista)

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Windows Media Player cannot play the CD.

  When I try to play a pre recorded cd, I get the following message. (Windows Media Player cannot play the CD. The disc may be dirty or damaged. Turn on error correction and then try again) I tried another disk drive, but I get the same results. Can someone help me with this problem.
  Thank you

  Hello

  1. are you able to play other CD in Windows Media Player?

  2. What is the file format of the CD?

  3. what operating system is installed on the computer?

  I suggest you to follow the steps below and check if it helps:

  Try to run fix it from the link below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Hope this information is useful.

• Error: Windows Media Player cannot play the file. The player can not support the Codec that was used to compress the file, MP3 downloads will not play

  Original title: MP3 downloads don't play no not on WMP

  My Windows Media Player recently stopped playing downloads from Amazon. I've never had this problem before. I installed VLC Player, has not worked... off the WMP in the Windows app, restarted, turned on the back and restarted... did not help. I get the message "Windows Media Player cannot play the file. The player may not support the Codec used to compress the file. This is for multiple downloads, so I don't think they would be all corrupted files.

  Hello
   
  Have you done any software or changes to the material on the computer before this problem?
   
  You mentioned that the files do not play on a third-party player as well. I suggest you to check if the files are corrupt.
   
  Method 1:

  How to Download Codecs automatically in Windows Media for Windows XP player

  http://support.Microsoft.com/kb/291818
   
  Method 2:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317

  Information on the types of media files that supports Windows Media Player

  http://support.Microsoft.com/kb/316992
   
  In addition, run the fixit from the link:
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/
   
  Hope the information is useful.