Contact list that has brought as local is not displayed in the user interface

Similar Questions

• My email has been hacked. There are two addresses in my contact list that I did not add.

  my email has been hacked. There are two addresses in my contact list that I did not add. They probably * the site addresses. Standard removal process does not remove them. What can I do to get them out of my contact list?

  You have not necessarily been hacked if it is the only symptom.

  In Hotmail,.
  1. Click on Contacts.
  2. Click on View invitations.
  3. Click groups.
  4. Click No, thank you to those who show themselves.
  5. Click on change your invitation settings.
  6. Select private.

  Noel

• I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using ethernet

  I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet

  Hi evilcrebyc,

  Consult the following Microsoft articles and make sure that all settings are correct.

  How to configure Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/306126

  Troubleshooting Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/308006

• Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

  Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

  You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

• I was typing an email that has been of about 200 words I hit the space bar and grabbed the next word and looked up the eyes and my email everything was gone.

  I'm at my wits end, HELP ME! I was typing an email that has been of about 200 words I hit the space bar and grabbed the next word and looked up the eyes and my email everything was gone! This happened to me several times and I can't ever find anywhere. It just disappears. Can someone help me? I want to know why he spends, how I can solve this problem how can I recover my work and where it went! I blame my laptop or windows or the manufacturer?

  I wrote a full description of my problem, but of course it also disappeared. I type 2-300 words and pooofff they disappear I can't explain it better or go on any more because I just it loose once AGAIN all! I tried to explain in more detail a related problem, but of course he gone too so I send this before I lose too.
  original title: email disappears

  The text turns blue, because you mentioned it.  The most plausible explanation to highlight all of the text while typing is due to hit CTRL-A, which is the same as Edit | Select all.  Then when you type a character when this text is highlighted, then highlighted (blue) text is replaced by the character you typed.  Be very careful to not press the CTRL key instead of the SHIFT key when you type a capital letter A or else which will never happen.

  If your cursor jumps around then also scan your system against viruses and malware.

  Steve

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• I have an old Photoshop CS3 that was installed on a desktop computer that has crashed and is still not bootable. I now have a new office with 10 windows and I installed it and it works. Activation is dimmed, but I can't save. It is said that there is no i

  I have an old Photoshop CS3 that was installed on a desktop computer that has crashed and is still not bootable. I now have a new office with 10 windows and I installed it and it works. Activation is dimmed, but I can't save. It is said there is no internet connection, which is not correct. What should I do?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• I had photoshop elements 13 on another computer that has been recovered by Microsoft and replaced by the new. How can I remove the serial number of a computer that no longer exists?

  I had photoshop elements 13 on another computer that has been recovered by Microsoft and replaced by the new. How can I remove the serial number of a computer that no longer exists?

  You are allowed to activate the software on two computers. If this is your second installation on the new machine, the software should assign without problem.

• Hi, I'm rookiee and I just started with the first steps of creating a Web site. the katies-coffee-building file is on my desk and uplouded in the library. That has worked well. Now I'm putting the button in Photo Shop (banner), I have pull down on file/pl

  Message "Hi, I'm rookiee and I just started with the first steps of creating a Web site. the katies-coffee-building file is on my desk and uplouded in the library. That has worked well. Now, I'm putting the button in Photo Shop (banner) in. I pull down on the file Photo Shop button instead and try to select the Banner.psd file. Unfortunately all of the (active) folder is not accessible to all. One is not visibel. Please - need some help here. Thank you.

  @Ach ja, meine Muttersprache ist Deutsch

  You must use the file > Place Photoshop button (Cmd / Ctrl + B).

• My iPhone with iOS 9.2.1 5s is deleting random contacts.  This happened for several months is not just with the last update of iOS.  Any suggestions?

  My iPhone with iOS 9.2.1 5s is deleting random contacts.  This happened for several months is not just with the last update of iOS.  It deletes recently used contacts and removes also from my iPad.  Any suggestions?

  That you synchronize your contacts with? A decision-making application supported on the computer, a Cloud Computing service?

• I have sony camera "cyber-shot". But since last 3-4 months when I connect it with my desktop PC, it has not displayed on the screen. Why?

  I have a small handy device the company Sony. The name of the template is - Cybershot. It is 10.1 megapixel with screen 7 cm square. When I connect it to my PC of countertop, it is not displayed on the PC screen. I have already installed the software, I received with the device of the company. For a few months, he was allowed and eventually I had my PC formatted by a technician and then, he stopped the display. I asked the technician if he ruined the camera software, he said no, he has not touched the camera software. I bought the new USB wire to fix the problem. But it is still not resolved. Can someone give me the reason why the camera is not displayed on the screen of the PC?

  Hello Manu,

  1. have you checked if the camera software is present on the PC?
  2. are you able to connect other USB devices to the PC?
  3 have you tried to connect to other USB ports?

  Open the list of programs by clicking the Start button, click Control Panel, clicking programs, and then clicking programs and features.

  You can try the following methods

  Method 1: As the PC was formatted, the software of the camera could have been uninstalled.  If you cannot find the software of the camera, I suggest you to install.
  http://eSupport.Sony.com/us/p/select-System.pl?PRODTYPE=7

   

  Method 2: If this does not help, connect your camera in a different USB port and check the status.

  Install a USB device
  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  
  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-in/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Method 3: follow also, troubleshooting of this article:
  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

   

   

  Follow the steps and let us know if this helps.  If the problem persists, answer and we will be happy to help you.

• When I try to get HP support assistance it won't let me and says that I need to change username, but I'm the user, very confused!

  When I try to get HP support assistance it won't let me and says that I need to change username, but I'm the user, very confused!

  Hey Dorf,

  To provide the proper resolution, I would need more information on your side.

  1. How did you try to contact the HP Support?

  2. What is the exact error message?

  You can check the link for more information about how to contact HP technical support.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• Currency of the line has changed since the user interface has been made on creating

  Hi all
  
  I'm ' currency of the line has changed since the user interface has been made. " The key to the planned line was oracle.jbo.Key' error on create action. Use case is simple. He saw table and create a button. When I click the Create button, I get this error. Back button of the browser is never used.
  
  The strange thing is that I don't get this error when I run my application on your premises. However, after I had it deployed in real development environment, he started up this error and I do not get this error on other pages.
  
  JDeveloper Version: 11.1.2.2.0 (JSF 2.0)
  Weblogic Version development environment: 11.1.1.6
  
  Kind regards
  Anil

  Same question: do you have the correct version of the runtime ADF your server?

  Timo

• How to reset the Status field and delete ToDo list outside the user interface?

  All, morning

  HR 802 generating WebHelp.

  I made use of the status field and ToDo List in the past. For my next release aid, I would like to reset these fields for all the subjects, so I can still have accurate reports as subjects of creation/revision of the final course.

  Is it possible to do without opening each topic in the user interface and compensation/change manual fields? (I thought to delete all fields of ToDo and recreate them, but thought that there is an easier way.) This information appears in each section or in a separate file?

  Thank you

  Patrick

  Hi Patrick

  1. Close all topics that can be opened in the editor.
  2. Open the pod of the list of topics.
  3. Select all subjects.
  4. Right-click and choose Properties from the subject.
  5. Click the status tab.
  6. Modify if needed.

  All subjects should change to reflect the new status and the task list settings.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. Can anyone help?

  I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. I now want to import photos from my iPhone, but nothing works. Can someone, please?

  MacBook Air, OS X El Capitan (10.11.1)

  Honestly, this entire thread is a repost of this , I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. Can anyone help?

  Still no answer...

  Have you tried the following:

  • Launch Photos manually once you connect your iPhone to the Mac.
  • Enter the ⌥⌘S tomato (command-option-S) key combination the sidebar visible.
  • Click on the camera in the sidebar when it appears.

  Your iPhone shows in iTunes or in the Image Capture?

  If iPhone doesn't appear at all, make sure it is properly loaded and unlocked, disconnecting, take a new photo, then reconnect it.

  • Start iTunes and confirm that you agree with the mac, the prompt on the iPhone.
  • Try a different USB port.
  • Try to force reboot the iPhone.