contacts does not after be entered manually

Similar Questions

• Contact does not receive messages

  Hello, I need emergency aid, like one of my Skype contacts does not receive any of my messages, but I can receive all their I tried to register another account, but it still does not work, I have no idea why

  Update: managed to fix Skype messages obtained through after about 500 of them sent

• 9.2 that my contacts does not open on Air iPad updated

  After having upgraded to 9.2 my contacts does not open on iPad Air but iPhone 5 s is ok? How can I fix the iPad because of the Air.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• CRS starts does not after reboot

  Hello
  I just installed RAC in a test environment using vmware server 2. I have Oracle Enterprise Linux 5 and used oracle 11g (11.2.0.1). I have not yet installed the software database and the oracle grid infrastructure has just installed.
  
  When I restart the node and deliver 'crsctl check crs', I see after release.
  
  [root@rac2 ~] # crsctl check crs
  CRS-4638: Oracle high availability Services is online
  CRS-4535: cannot communicate with Cluster Ready Services
  CRS-4529: Cluster Synchronization Services is online
  CRS-4533: Event Manager is online
  
  Now, "crs_stat t" does not work unless I manually start the crs daemon by using the command "crsd start." Why the crs daemon starts not automatic unlike 10 g RAC. Is this a normal behavior and what is a good way to make this daemon to auto-start.
  
  Salman

  I guess you run crsctl check crs immediately after the restart. It doesn't take long for the crs start and you don't have to start it manually. By default, crs is started automatically and if for any reason any you disabled, you can enable it using 'crsctl enable the crs '.

  You can also check the status of different services using the:
  # crsctl check crsd

• Why is-Messages for my non apple contacts does not on my Mac, they work very well on my iPhone.

  Why is-Messages for my non apple contacts does not on my Mac, they work very well on my iPhone.

  Transfer continuity troubleshooting procedure

  Continuity of transfer troubleshooting (2)

  iPhone, iPad, iPod touch and Mac using continuity - connect

  SMS relay - set and use - Yosemite / iOS 8

  SMS relay - set and use - Yosemite / iOS 8 (2)

  Sending text messages

• Why can't search contacts on my profile bar, the search I want to say that if I need to find contacts I put the name in the search bar on my profile but still they say that this contact does not exist

  Why can not search for contacts on my profile bar, the search I want to say that if I need to find contacts I put the name in the search bar on my profile but still they say that this contact does not exist why this before it was ok

  original title: the search for contacts

  Hi Sam,

  First select the operating system you are using, or maybe give an indication on the operating system installed on your computer. While other members of the community can help you with this problem.

  You use Outlook?

  Are you referring to outlook contacts?

  Reference: http://support.microsoft.com/kb/555375

• AutoComplete doesn't work does not after installing IE *.

  AutoComplete URL function works does not after installing IE8.  Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
  ticked off) but it is said to "..". turn of Internet Explorer".  Whatever that means, and how I seized not semi-automatic work again under IE8?  I can go back
  for IE7, if it's the only way.   I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go...  Thank you

  sjakulski,
  Thank you for visiting the Microsoft Answers community forum.

  In Internet Explorer 8, the Auto complete option is in a new tab.  Go to tools, Internet Options and then click the content tab.  You will see a section that says "Auto-Complete".  Click on the 'Settings' button and it gives you several choices of auto complete options.

  This should solve your problem.  Let us know if you need more information.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Apple 3rd generation does not after having installed new router put I in the codes manually

  Hi recently had outages etc and a new installed router in wifi but now my apple tv 3 does not work but only home screen sharing/settings see I am signed the Mac for home sharing.  When I go into network settings I see the configuration is automatic, but the router shows that n/a, does that mean that I have to put codes?

  TIA

  Wendy

  You have connected the Apple TV for the new router?  You will need to make sure that the Apple TV is connected to the wifi network, which broadcasts the new router...

  Get help with Wi - Fi on your Apple TV networks - Apple Support

• Satellite L500 - 19 X does not after all liquid spill

  Hello

  Newbie here, pleased to meet you all.
  I got a Toshiba L500 19 X, who has a problem, the keyboard does not work, at all.

  This happened after a spillage, or so I thought.
  I fixed a few laptops which have been submitted to liquids, but this one is different.
  In this case the laptop works brilliantly, is not a problem except for the keyboard does not.

  I have attached an external usb k/b and it works perfectly. I stripped the laptop down to the mobo and there is no sign of a reversal of liquid.
  I use a large magnifying glass to inspect the Board, usually find something blow over, but does not in this case.

  Nevertheless I cleaned the mobo and everything seems fine. But the k/b will not work.
  I am come to the conclusion that the problem COULD be an update of the bios of electronics, or corrupt.

  I have d/load the latest version of the Bios, gaining 2.10, but when I go on install it tells me that the current bios is equal to or newer than the one I have d/load and flash will not take place.

  I come hat in hand, to help if possible, and to see if anyone has had the same problem.
  Maybe point me in the right direction.

  The bad news is that there is a problem with the motherboard.

  Any help or advice would be appreciated.
  Thank you in advance.

  > In this case the laptop doesn't work brilliantly, is not a problem except for the keyboard does not.
  > I have attached an external usb k/b and it works perfectly

  So you have a great chance looks like the motherboard is ok and the keyboard controller also works.
  Why is this a BIOS problem? The laptop worked perfectly in the past
  Therefore, in my opinion you should contact point of service allowed in your country and should replace the keyboard.
  In my opinion the problem of keyboard internal

• To install the server does not, after a Preparig to install the window hung for several minutes

  Hi, I tried to install memeo backup of a product for a moment, I recentley purchased. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see tho, I have the seagate FreeAgent GoFlex 1 TB external hard drive, and I had planned to use it on several computers. sort of, I installed it on my computer windows 7 without probs., but when I was installing on my windows vista computer, I accidentally unplugged the drive when installing memeo instant upward.  Needless to say, I knew this would be a problem. Windows popped up saying that the dashboard Seagate (which is the program that installs Memeo instant backup) have not installed properly, so I clicked on reinstall this program with the recommended settings, and I handed the drive and started the installation again. When I did, the registration page (for the unit I was using) pops up and froze, so I closed its process, then Setup of the Board of Directors of Seagate Dash appeared and I started to install, and when he rose to installation of the snapshot of Memeo back, it opens a "Preparing to install" window of a windows installer and after about 10-15 minutes , another windows installer window comes up saying ' to install the server does not.

  Ive done my time just trying to solve this problem and believe he made an incomplete registry file, it whenever it tries to install it tries to use the incomplete record. If one has found a solution to this, or knows what that means of ' installation server does not ", it would be very appreciated for your advice.    If you want to know my characteristics. they are {windows vista 32-bit home Basic, sp 2, 3 GB of ram, 2.10 ghz processor}

  Hello

  you are in the wrong forum

  It comes to the installation of vista operating system instance

  Why don't contact you the program manufacturer?

  Try the repair and recovery forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

• Windows 7: Explorer.exe does not start but if manually run it restarts my laptop.

  My laptop HP Probook 4530 s boots until the Welcome screen, it does not continue to show the desktop instead, it shows only a black screen.

  As I entered in the Task Manager, I tried to check the process and discovered that "explorer.exe" is not running. I created a new task, browse the explorer.exe and run. It shows the office, but after 10 seconds or less, it restarts and goes back to the black screen after the Welcome screen.

  How to solve this problem?

  Hi Mark,

  Check if the Userinit registry value is correct. To read, use the command:

  Press Windows key + R, and type:

  cmd /k reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v "Userinit".

  Copy what is displayed in the output and after here.

  Similarly for the value "Shell:"

  cmd /k reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v "Shell."

• ListView does not populate when entered second time

  Hi all

  It comes to my previous query:

  http://supportforums.BlackBerry.com/T5/Cascades-development/problem-with-findChild/m-p/2441175#M2524...

  Now when opening the app, I can see the listview in the note.qml and after click on return of the navigation pane and enter the same page (note.qml) still I am not able to see the ListView.

  The code is available in the link above.

  I guess that groupDataModel is exposed via C++ right? Is Qt.objectCrypt.fetchNotes () who is to fill the data model?

  I think your problem might be that the ListView takes possession of the "groupDataModel". Then he destroyed it once the page is destroyed. And the second time, it does not appear because the data model is already destroyed.

  See the documentation of the ListView, as soon as you assign it a dataModel is supported if the datamodel does not have a previous parent. So your solution is perhaps here give the groupDataModel a parent existing if ListView does not try to take ownership.

• Editor BEEP works does not after having changed the OBIEE OBIEE 11.1.1.6.0 integration

  SSO has been implemented with SSO - Ondaaah using Kerberos authentication.
  
  Note then is "OBIEE 11 g: configuration of authentication and SSO with Active Directory and Native of Windows authentication" [Doc ID 1274953.1]
  
  But SSO not working for BI Publisher. When contacted Oracle they suggested me to follow the bug below.
  
  Bug 14066028 -BI PUBLISHER does NOT CREATE SESSION SAW the HELP of MSAD AUTHENTICATOR PERSONALIZED
  
  When OBIEE use SSO with MS Active Directory, BEEP should be used instead of analyltics Analytics-ws endpoint. But currently, BIP uses analyitcs as endpoint.
  
  Solution
  1. replace integration endpoint OBIEE Analytics Analytics-ws in the interface user Admin of BEEP (integration - Oracle BI Presentation Services).
  2 test cycle.
  
  
  --------------------------------------------------------------------------------
  
  Now I can't access BEEP or OBIEE or xmlpserver.
  
  When you try to access BI Publisher by http://servername.domian.com:9704 / xmlpserver
  
  Error 500 - Internal server error
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.5.1 500 internal Server Error
  The server encountered an unexpected condition which prevented him from meeting the demand.
  
  
  When you try to access the Administration > BI Publisher > Manager BI Publisher we get the following error.
  
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
  
  -----------------------------------------------------------------------------------
  
  I tried to change the xmlp-server - config.xml in to analytics.ws and bounced the server, but still facing the same issue.
  
  Please help get the BI Publisher.
  
  Any help is very appreciated.
  
  Thanks in advance.

  This problem has been solved once once the config.xml xmpl-server-file has been manually under the leadership and analytical endpoint was changed to analytics.ws. Bipublisher.ear on WLS console application restart.

  Thank you
  SVS-

• Flash still does not after him to do so on windows 8.1?

  I followed the instructions on the help and compatible flash section, but it still does not. Then I tried to download it and the page takes me to the procedure to follow to activate it.

  I just bought a new laptop and it is completely up to date with 8.1.

  Any help would be appreciated.

  Flash Player is actually integrated in Internet Explorer on Windows 8 and 8.1.  There is nothing for you to download or install it from Adobe.

  After the description of the problem, looks like you're going to a Web site and send a message that Flash Player is not found.

  On most sites, there is JavaScript that determines which version of your browser and Flash are installed, so that it can determine what content to show you.  In Internet Explorer 11, Microsoft has changed the string that identifies Internet Explorer for these scripts, and it is very likely that the Web site you are visiting needs to make adjustments to account for the change.  There will probably be a chaotic transition period, as web properties major pointed out the problem and fix it.

  Meanwhile, Mike's suggestions are good.  Use Compatibility Mode or another browser.  You can also contact the website (especially if they have a small shop) to make them aware of the problem.  You are on the end at the beginning of the adoption curve, and they may need up to a leader.

  Thank you!

• Update of Pluging Manager works does not after upgrade

  I think I'm having the same problem as everyone else and I'm pulling my hair out trying to understand what is happening.  Let me first start of by saying that I am in no way a SQL DB, so I'm just Dodge my way through so far with no luck.  So far, that's what I did.  I was running ESX 3.5 U4 and vCenter 2.5 U4 with a server remote phyiscal SQL 2005 for VCDB & UMDB.  I upgraded to 4.0 vCenter and everything was fine.  Then I tried to update Update Manager.  He's been through, I managed to install the plugin Update Manager, but it is disabled and whenever I load the vSphere Client I get and error, "there was a connection to VMware vCenter Update Manager error - vcenterserver:8084.»  Unavailable temporarliy database or network problems.

  At the moment I have:

  VMware VirtualCenter Server Service set to automatic and log in under the same account AD as with the previous version.

  VMware Update Manager Service is set to automatic and log in as a Local System.  Update Manager service will not start if you use this account or any account AD.

  System DSN defined for the Update Manager and VirtualCenter with SQL Native Client driver.  Remote server entered correctly and I use Windows authentication integrated with the default correct database selected and everything else is default.  When I do a Test connection, I get a successful connection with the two system DSN.

  However, Manager of continuous update not working which VirtualCenter Server works fine and both of the DB is on the same remote server.  Just for fun, I tried to install SQL Express on the vCenter Server Server for the Update Manager and it worked.  However, I would use the same DB Update Manager that I used on the remote server.  I checked the log file, and that's what I'm after launching the vSphere client.

  Product = VMware Update Manager, Version 4.0.0 Build = 162871 =

  Managed implementation information configuration process

  Unable to get the module name to process 4. Error: 299. Ignoring the process

  Starting managed the java.exe process

  Starting managed process rdevServer.exe

  Monitoring process started

  Internal Manager of the tasks established demand...

  Handler created email alerts...

  Configuration manager created...

  Locking of entity manager created...

  vaCrypto initializing...

  Key responsible VALM C:\Program Files\VMware\Infrastructure\Update Manager\ssl\valm.key

  Health services manager created...

  Collector of statistics created task...

  Trace for all: false

  Record of integrity. BaselineComplianceStatusCollector: true

  Integrity.ComplianceStatusManager trace: true

  Record of integrity. DVSManager: true

  Record of integrity. ScheduledTaskManager: true

  Record of integrity. SessionManager: true

  Record of integrity. UpdateComplianceStatusCollector: true

  Record of integrity. UpdateManager.remediate: true

  Record of integrity. UpdateManager.scan: true

  Record of integrity. UpdateManager.stage: true

  Record of integrity. VcIntegrity.setConfig: true

  Record of integrity. VcIntegrity.setNewUpdateConfig: true

  Trace loaded objects.

  VcIntegrityPlugin Init

  Add reminder to Ufa Shutdown manager.

  ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.

  vim.fault.DatabaseError

  VcIntegrityPlugin Start

  ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.

  vim.fault.DatabaseError

  No. began

  Leave validate. Failed

  ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.

  vim.fault.DatabaseError

  No. began

  Leave validate. Failed

  I don't know what that means or how to fix.  Any help would be grateful.

  Hello

  As far as I understand, you are using integrated Windows authentication. Can you please try to use SQL Server authentication instead of Windows authentication? Update Manager does not support Windows authentication when the database is on a remote computer. The database and the DSN system must use SQL Server authentication.

  You can also take a look at the following thread: http://communities.vmware.com/thread/212853?tstart=0.

  Hope this helps,

  Margarita