Contacts slows to a crawl when creating or editing after upgrade to Yosemite of Mavericks

Similar Questions

• What is the component used to select contact in the field "to:" when create new sms on BB OS 4.6?

  Does anyone know which component is used to select contact in the field "to:" when create new sms on BB OS 4.6? What is KeywordFilterField? If yes - how to customize it to make it look like the sms app? Can you give us some examples of code? I'm new in development for BB and I need this functionality in my application.  I will be very appreciate for any help!

  You will need to implement your own field full auto in this case.

• T430s and create recovery media after upgrade to win 8 Win 7

  Is it possible to create a recovery media after upgrade to Windows 8 of a factory installed Windows 7?

  You do before the upgrade.
  NO.

• 500 - 81ea: create recovery media after upgrade to windows 10

  I created a USB recovery when I used my PC (using the 8.1 window)

  I had a time to use it to perform a destructive restore but then had to wait for all the upgrades automatically install to get me back to where I was and of course all my other software such as iTunes and music, photos, etc.  Checking to see if I can upgrade to windows 10 I was informed that my windows was not up to date and that I didn't know the logo windows at the bottom right of the screen. I have now been in the screen of windows update and installed quite a few updates and now have the upgrade of windows application.  My question is if I upgrade to windows 10 and then must perform a full recovery can I do new media of recovery or I'll have to go back to windows 8.1 using my existing media and then updateHP software and windows 8.1 and upgrade to windows 10 and the free update will be always available or is there a way I can create new media recovery to allow me to recover Windows 10 OR an altrnative goes back to the creation of a backup drive on an external hard drive and a way to get this image on my HDD internal. OR to simply stick with windows 8.1 and hope, that it is taken in charge as long as XP was.

  THANKS IN ADVANCE FOR ANY HELP

  JIMBO

  Hello

  First things first. Don't forget that your USB stick recovery is the HP external recovery media and not just another type of recovery image. Back up your data. Check that your PC is supported by HP for Windows 10 and that your PC meets the requirements of Windows 10. If so, then be sure your Windows 8.1 system is fully patched and up-to-date with Windows and HP implemented to date.  When you make an in place upgrade W10, W10 process will have a roll back feature that will be available in case you are not happy with the W10.  I made a couple of back roller and the process was pretty quick.

• Satellite U500-10F - creating recovery disk after upgrade Windows 7

  I bought a Satellite U500-10th with Vista OS and I decided to upgrade to Windows 7, so I ordered at Toshiba upgrade disk and installed it.

  * My question is *: * it is possible to create with Windows 7 recovery discs? * in order to avoid the downside to install vista first then do the upgrade to windows 7

  Whenever I need to do a clean install and also to avoid the disadvantage that it is not too recommended to validate windows whenever you perform a clean installation, because the problems of authenticity can emerge with microsoft!

  Thank you

  Hi m.tarek,

  I doubt that this would be possible. First of all, you have ordered only an upgrade, which means that this version can be installed on a pre-installed version of Vista. It is not a full version that you can install without BONES.

  Besides recovering the files on the second partition (btw, that's a picture) contains the Vista operating system and not Windows 7. It does not update.

  Sorry mate, but this is why there will always be this update of s. Alternative, you can create your own image using Acronis True Image or other imaging software.

• creating recovery media after upgrade to 8.1 window

  Hello friends. I have a lot of confusion. I bought a laptop on December 2012 with window 8 preinstalled and created the recovery media about 6 or 7 months later. And now, I upgraded my system to window the window store 8.1. And now again I would create a recovery media for windows 8.1. So my question is if I create recovery media on a flash drive usb and if in the future I want to reset my pc or reinstall my system, I'll make window 8 or 8.1 on my system. I'm not a computer expert. If anyone can help me please. Thank you.

  Hello:

  You will get Windows 8.

  If you want to do a recovery W8.1 image you can do the following...

  You can create a system image in W8.1 and save it on a portable hard drive or set of DVD as you might in W7.

  Instead of making a bootable cd as in W7, you need a boot flash drive boot. You can use a flash drive to very small capacity (256 MB) for the startup recovery W8 flash player.

  Check out these links for more information.

  Create the image of the W8.1 system:

  http://www.hanselman.com/blog/CreateACompleteSystemImageBackupWithWindows81AndFileHistory.aspx

  Create bootable W8.1 flash player to access the system image.  Don't forget, you can use this drive, you can boot from it and access the system image you created on DVD or a portable USB hard drive.

  http://anewdomain.NET/2013/09/13/create-USB-recovery-drive-Windows-8-1/

• XPS 13 screen flickers when you wake up after upgrade Windows 10

  Whenever I have turn on the laptop, or reactivate it the screen upward when it darkens, the screen starts to Flash. It's as if it was glitching seconds before it stops... It lights up for about 5-10 seconds. It started to happen after that I've upgraded to Windows 10 yesterday (I got my XPS 13 yesterday). Model is the i7 with the screen touch infinity.

  I checked that I have all the latest drivers. So this software or hardware? And what I can do to fix this?

  cs_setInnerHtml ('video_8cecf91e-1548-416f-b0d3-48040316df70', ");

  Can confirm, new driver solves the problem.

  Go to Device Manager, right click on Intel 5500, update driver software.

  Thank you Dell, but seriously, you really took unreasonably long on this one.

• When creating mail in Windows Mail by using the Contacts file.

  Creating e-mail in Windows Mail I can not access my Contacts folder.  Any reason why it is just stopped working?  Thank you.

  To all,

  I found my own solution and think it can benefit everyone on this thread and others who have access to this thread.

  When creating Mail in Windows Mail, I used to be able to click on to or CC contact icon and be presented with the same entries in my file of Contacts.  All of a sudden, I got a list of contacts "Empty" in the contacts to or CC box.

  To fix this, I closed the function create a message.  I opened my Contacts folder where all my contacts were intact.  I selected all the contacts.  Then right click selections shaded and chose properties.  On the general tab, I did so that the attributes were the unchecked Hidden attribute selected apply and then OK.

  Who did it!  Now I can go to create a message, select the to or CC and present people with equivalent display my Contacts folder icon.  Now, I can click on the recipients and complete the line receiver with my selection!

  I had a problem recently with having lost all my favorites in IE 9.  It was suggested to me via the IE community to ensure that all my contacts have unchecked Hidden attributes.  That solved the problem of favorites so I tried here also.  The IE community attributed these abrupt changes were due to a virus.

  Hope this helps all of you.

• My contacts are not displayed in her select a recipient option when creating a new email. They appear in my contacts.

  My contacts are not displayed in her select a recipient option when creating a new email. They appear in my contacts.

  I didn't know I was so vague with my information. However I understand it. I continued to try to export contacts from a previous e-mail program to a .csv file and few would go. I went back in my contacts Windows Mail, click on properties and noticed that the contacts had somehow hidden checked. I have then all selected and not the box and now they appear in the Select Recipient window.

  Thanks for responding

• Adobe booth 7.1 on Win7 32 bit, 4 GB of ram - when creating a pdf file, that he was very quickly now that is very, very slowly, at 53 seconds of 8 pages.  We scan many documents and this slows us down.   I tried another directory, cleaning the th

  Adobe booth 7.1 on Win7 32 bit, 4 GB of ram - when creating a pdf file, that he was very quickly now that is very, very slowly, at 53 seconds of 8 pages.  We scan many documents and this slows us down.   I tried another directory, clean the current directory, remove other programs that have been added and stopped scanning of Kaspersky.  Any help would be greatly appreciated

  Assuming that you are talking about Adobe Acrobat 7 Standard, it is far from being compatible with Windows 7, if problems are to be expected.

  The first version which has been is 9.2, if I remember correctly.

• First slowed to a crawl. Help, please

  Hi, I'm a photographer and video editor. I built my computer about 15 months ago to work with CS5 and the Mecury playback engine. In recent months it has been slowing down at an alarming rate. During the holidays, I created a video of the wedding of my brother and kept first photos to stop with an error that read something like "Open GL driver failed" add something about 'out of memory'. I had to go into software mode and avoid playing the scenario (to avoid to make each photo, there were more than 100) so I could finish it in time. And now a project that I am paid will no longer reading smoothly. I get about 1 second of video fluid before it begins to blow and gel together. The audio continues, but the image does not work. Here's what I have.

  Intel Core i7 950 (quad core) 3.07 GHz

  12.0 GB of Ram

  Windows 7 Pro 64 bit SP1 completely up to date

  NVIDIA GTX 470 w / 1280 MB GDDR5

  current driver. 285.62

  C: 60 GB SSD for the system and programs of 4.64 GB free

  E: 300 GB 10000 RPM 16 MB cache drive for project files VeliciRaptor preview files/scratches discs and this 134GB free

  G: 1 TB 7200 RPM 32 MB cache drive Barracuda for assets 158GB free

  I have 2 other drives, but they are not used in this workflow.

  Pagefile = 36859 MB handled automatically on drives C: and E:, G:

  My plan of energy consumption is set to High Performance.

  I am editing in first Pro CS5.5.2 (003 (MC: 258762))

  The programs that I have running in the background are: Audio Manager HD Realtek NVIDIA Settings, Zone Alarm (security), Dropbox 1.1.45, Spyder3Utility and updated Spybot.

  The project is a short 10-12 min video documentary type. It is especially interview with various B-roll interspersed. The main scenario that I use is 4 video and 4 audio channels. The fourth layer both stops to hold things. There is not much in them. Layer 1 is pieces of another calendar. This scenario consists of 2 layers of interview with 2 angles with a third audio track of the zoom recorder all in sync and color corrected. I set the opacity here to choose what angle of camera to use, but cut this whole timeline in my scenario main to minimize synchronization issues and added stage of color correction.  In the main timeline, video layers 2 and 3 are B-roll. audio layer 2 and 3 include a short sound effect and a few pieces of music. Part music has been slowed down or sped up to fit the necessary time. First renders quickly as sound when I start the project or make changes to these files in the timeline panel.

  All the sound elements are MP3 or WAV files.

  Most of the video's images of Canon DSLR (5 d mkII, 7 d and 60 d, I think). All 30 1920 x 1080 p (24 p a couple by accident) there are some files JPEG, TIFF and PNG file. Many of the images are kept at the void chronologies with 2 layers. one with a moving image, and the other with a Gaussian blurred version in the background to fill the frame. There are a few timelapeses that are of different sizes, but nothing smaller than full HD 2 are MP4 videos and the rest are quicktime.

  All of my calendars are preset for a DSLR movie at 30 fps 1920 x 1080.

  Almost all of my calendar has the small yellow line above it indicating that we should be material made these images.

  A few things about how I worked with this computer. I built it for CS5. When I started using it, it was great. Lately the computer has slowed down, a lot. last week, I uninstalled a few foreign programs and twisted somethings. Almost everything on the computer is now equal to running back. First is not. It's also the point that I can't edit, and edit a new project is due this Friday. When I started to use this computer I had some noise GPU and CPU fans when I load an intensive service project. This makes sense he was doing computer work. Now I have almost no noise from a fan and the thing works like shit when I'm editing. It's not logical for me. If something has changed with a first update that changes the way she builds on the material, cause I does not seem to do this at all. Or could I have knocked down without knowing a switch somewhere that has changed this leverage effect. In the project settings , made video and reading is always set on Mercury Playback Engine GPU accelerated. On the same line, I have noticed a lot less noise from the fan when rendered with Media Encoder. I can't say I've seen a huge success in it, but it seems not be taxing the GPU as previously.

  Please help if you can. I don't have time in my life to start the computer with a new installation on windows. Thank you very much.

  Michael

  Dear John, Stephen, Bill and insular.

  Thanks a lot for your help. Here's my solution. Although I never really discovered the problem.

  I couldn't do anything in the works, so I did a clean install of windows and all of my programs. A lot of fun, but part of the reason why I organized my computer as I did with a small SSD as the root of the drive for windows and programs should quickly be albe wipe and start over with mining of the minimal information off the drive backup I wipe. So after reinstalling and updating almost all first runs very good once again. I say very good, not amazing. But I admit it's a bit detrimental as my initial astonishment at how first ran when I first built this computer must have been greatly influenced by how much better it was than my old rig.

  First is now running at the height, especially with more simple projects. For the complex project I was working on it turns out that we had to go back to piracy and share history with the edition of raw, so to do this, I disabled the color correction in my nested sequence that keeps running nice and smooth. I can quickly re-enable later once we get the lock of the photo. But its good to know that the work is done.

  On a side note, while I reinstall windows, I checked some settings in the bios and noticed that the CPU (intel core i7 950) was operating at 90 degrees Celsius. Way hot. apparently my stock heatsink of heat began to fail. And I think, but I can't be sure, which may have contributed to my slow in performance. So I installed a new CoolMaster and took the opportunity to dig into the area to add more than 12 GB ram.

  I'm back on and have been for a few days after the last wave of messages. (I got some catching up to do). Thank you all very much for your help. I have a question finally. I did the re - install windows several times in my life and have gotten good enough to get the required information before I have format to get programs up and running again afterwards. I forgot in my haste to save my preferences/presets in my Suite from Adobe. Is there a quick way or simple way to backup/export your presets and setting in the Master Collection CS5.5 so when something like this happens, I should not rebuild all of the little things?

  Sincerely,

  Michael

• When I type list5 contact in the Outbox, for example, it will not show the first 11 entries that indicate when I hit edit. on this list.

  The line of question above explains my problem. The list displayed when I hit edit on a list of contacts does not match the list when I hit Edit under contacts.

  It seems that you are having problems using some website in Firefox rather than Firefox itself. Can you tell us anything on the website that you use when the problem occurs?

• Win2k3 Server IIS SChannel event 36871 "a fatal error occurred when creating the SSL server credential information."

  To make a long story short, I went to use client software that I use a few times a week and it would not connect to the server, complaining not found or number of SSL.  When research various dcom, schannel errors errors in the event logs and a few others, I systematically over the last 24 hours cleared up the boot is so now clean (no time starting network on startup and no message on the service could not start).  It seems that something has happened a month ago after that the server crashed where at least the first DCOM messaged presented themselves, but everything has been working well until it didn't.  The dcom patches end up having to do with the ...\rsa\machinekeys (and the way that it) had a few "account unknown" in it, I cleaned everything that (at a time since I removed all items in this folder, but then put their subsequent return (by crushing all except 2 after creating a new certificate), had to reinstall virtual server and iis 6) , at some point as well.  In any case, I'm at the point where everything works (no event log errors/etc) from startup until you try to connect to the IIS 6 Server using https:... at this point, you get the event SChannel 36871 "a fatal error occurred when creating the SSL server credential information." (no additional information) is connected and the client browser cannot access the site (you can keep trying and it does not work but no event log entry more).  So that's where I'm sitting, http: works fine, https: No.  Certificate appears in the default Web site correct, said valid and possesses the private key, port 443 is there, all addresses by default, netstat shows port 443 same process id as the port 80.  I can't find a copy of SSLDiag do test to see if that prove something?

  So I need help what is not going to get this new job of fixing.  What should I do?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• VI, slowing to a crawl

  Hello

  I have a VI that slows to a crawl after running continuously for 48 hours.  It's just a program of aquistion of database that I need to run for two weeks. Any thoughts would be greatly appreciated.

  Thank you

  It's actually December 31, 1903 at 18:00.  You must be in the Central time zone.

  You should take time before your loop begins and it wire to the node of XScale.Offset property to each of your graphics.  Also set the XScale.Multiplier to the value you have in control to enter the time delay function.

• I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

  I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

  original title: third party INF problems

  Hi Paul,.

  ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

  You can see the following article on how to set up a network.

  How to set up a small network with Windows XP Home Edition (PART 1)