XPS 13 screen flickers when you wake up after upgrade Windows 10

Similar Questions

• Satellite Pro A120 - screen flickers when you activate another monitor

  I have a Satellite Pro A120, who has a problem with the computer screen to turn off image poor qulity (looks like interference) when you use the function key and activate a second monitor, but the image on the 2nd monitor is fine. I also discovered that the second monitor doesn't have to be physically connected to the main display having the problem, as soon as you activate the second screen the problem starts. However, as soon as you disable the second monitor, the computer screen looks perfect.

  I updated the BIOS of these two and the graphics driver, but the problem still persists.
  Any ideas?

  Why don't you tell us what portable external that you use?

  Have you tried to put the good resolution of monitor 1 (s notebook LCD) after the switch to the external display? I can imagine LCD becomes bad resolution and it must be changed.

  Please play with all the display settings. I used my cell phone so many times with different external screens and I was always able to configure this works well in any mode offered.

• Issue of Dell place 8 Pro Wake-Up after upgrading Windows 10

  Hello!

  I upgraded to the latest BIOS A11 and installed all Windows 8.1 awaiting upgrades before version 10 of Windows. Yesterday, that I've upgraded to Windows 10.

  Most things run pretty well... but one annoying thing:

  When the device goes to sleep, I can't wake up around the high most of the time. Anyone can confirm this problem or has a work around?

  Kind regards, Andreas

  Thanks for posting. I saw that last night. Just before I was about to go back to 8.1, I decided to check the driver page once more and I saw there was new files for the chipset and a few other drivers. Works perfectly now.

  Thanks to Dell to get these online.

• Problems with the touch screen of HP all-in-One after upgrading Windows

  I recently updated my version of Windows (64-bit) with system updates and then a full version updated to version 8.0 version 8.1.  After the update is complete, I started to experience a strange problem with the touch screen on my HP Envy Rove.  The screen would flash repeatedly one set of points in the right lower quadrant of the screen as if the simulation random screen button.  There is no way to stop this.  If the screen on a keyboard was pulled up, letters in the place of the flashes would be broadcast in the fields on the screen.

  The only way to stop the flashes of screen has been to go into the Device Manager and disable the HID-Compliant device driver.  It stopped (system generated keys) flashes, but also disabled my touch screen input.  So now the system is usable, but without the benefit of the touchscreen.

  Here is the information on the driver:

  HID-Compliant device

  Date: 21/06/2006

  Version: 6.2.9200.16851

  (input.inf)

  I tried updating the driver, but this seems to be the latest version available.  Go back to the previous version of the driver, could solve the problem, but I could not locate on the support web site.

  Any suggestions on how to solve this problem and re-enable the ability of my touch screen?

  Hello

  Downloaded drivers from the manufacturer will be the most tested and up to date available. The best place to download a driver is directly from the manufacturer of the equipment.

  So I suggest you to install the driver that is available on the HP website for your model.

  Troubleshooting of touch screen in Windows 8

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03488148

  Just reply with the results.

• screen flickers when connected to the internet

  my screen flickers when connected to yahoo on the internet.  doesn't seem to be as bad when visiting other sites such as Google.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > looking for the latest graphics drivers for Vista > download/install them

  See if the information below helps you solve the problem/s you have with Internet Explorer:

  http://support.Microsoft.com/default.aspx/KB/936213/?p=1

  "How to optimize Internet Explorer"

  Configuration in Windows Internet Explorer 7 and Windows Internet Explorer 8 settings can cause one or more of the following problems:

  ·     You experience performance issues in Internet Explorer.

  ·     You receive an error message in Internet Explorer. For example, you receive a message error "Internet Explorer cannot display the webpage".

  ·     Internet Explorer stops responding.

  This article describes how optimize or reset Internet Explorer in Windows Vista to solve these problems.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936215

  "How to solve the problems of Internet Explorer in Windows Vista and Windows XP"

  This article explains how to solve any problems that you may experience when you use Windows Internet Explorer 7 or Windows Internet Explorer 8 on a computer that is running Windows Vista.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936214/

  "How to solve compatibility problems that affect Internet Explorer 7 in Windows Vista"

  This article describes how to troubleshoot software compatibility affecting Windows Internet Explorer 7. To help determine which program may be the cause of the problem, you can do the following:

  1 use the mode safe mode with networking

  2. perform a clean boot

  3. use another user account

  4 scan your computer against viruses and spyware

  5. run Internet Explorer 7 in "no Add-ons" mode

  Hope the above helps.

  See you soon

  Mick Murphy - Microsoft partner

• SCREEN FLICKERS WHEN I PLUG THE POWER CORD A/C

  Can someone help me with this problem. My screen flickers when connected im playing games with my a/c power cord. Howerver when I remove the power cord, it works fine on battery. Also my battery almost won't charge at all with my laptop running, but when I put into hibernation or to stop it charges more quickly. Would appreciate any help as soon as POSSIBLE. Its a Dell Latitude E6400, windows 7

  Diagnosis

  The video "Refresh" is switching between 60 (on food) and 50 Hz (on battery), and the screen goes momentarily empty.

  Solution

  So what about current alternative, office > right click > properties > settings > advanced > monitor. Here, under the display settings, set the refresh rate of the screen at 50 Hertz. After you apply these settings, the flashing problem gets fixed.

• How to disable the screen saver when you watch videos in full screen in firefox?

  This only happens with Firefox, other browsers videos play normally and without interruption. I want to keep my window screen saver by default but not when watching full-screen mode.

  The Flash Player plugin must normally block the system to go to sleep, reduce the brightness of the display or go to the screen saver when you are using full-screen. It is strange that you have this problem with Flash.

  There are workaround solutions such as the use of an add-on or an external program that simulates the movement of your mouse, but those who really shouldn't be necessary.

  VLC, I don't know.

  Furthermore, you closed and restarted Windows because this problem first occurred? Just in case where some component shared Windows crashed.

• Photoshop CS6 - screen flashes when you use brushes with new MacAir 2013

  The Adobe team would you please answer the questions reported by multiple users:

  http://forums.Adobe.com/message/5449199

  Several users have some severe in Photoshop CS6 screen flicker when you use type tools more large brush (cloning, Eraser, brush, healing spot, burning and dodging).  As many on this thread know it's ugly and unusable! The glitter is widescreen black boxes, sometimes the entire screen goes black.  It only seems to happen when we put the cursor on the image to change.

  Hardware: MacBook Air 13 ", Haswell 1.7 GHz, 8 GB, SSD 512 Software:

  Photoshop CS6 v13.1.2 20130105.r.224, v10.8.4 OS X (and perhaps others)

  Looks like a CS6 is not compatible with the new MacAir. Please look into this and advise.

  Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00) x 64 operating system: Mac OS 10.8.4 system architecture: Intel CPU Family: 6, model: 69, Stepping: 1 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading FP

  Post edited by: GSVAI

  Apple has released an update to the MacBook Air 2013 which corrects this problem: http://support.apple.com/kb/DL1672

• disable the words to guess when you type in the search window

  How to disable words to guess when you type in the search window

  https://support.Mozilla.com/en-us/KB/search+bar

  See - search suggestions at the bottom of this support article.

• Folders of bookmarks in Safari in the Favorites bar not open click when you access one after another

  Question: The records of Safari bookmarks in the bookmarks bar not open click when you access one after another

  Diagnostic steps:

  (1) create 2 or more folders in the bookmarks with the individual sites in their breast.  (Examples of folder name: career, finances and health)

  (2) safari > display > display favorite bar. All the Favorites should be visible in the main window of Safari with all these files

  3) click on the folder named career and then go directly to Finance. (the record finance should open with a single click)

  (4) or try to open the folder of health directly after clicking on career record. The health record is expected to open in one click. This does not currently happen

  Currently, 2 click are required to open a folder in the Favorites bar. To activate the button and the second displays the Web sites it contains.

  It is annoying and seems as if the browser is obsolete.

  If opening cursor hover is not what apple wants for these records, we are fine with it. But the least we should do, it's that these files opens in one click.

  Thank you.

  Send feedback to Apple. They will not respond, but at least know that there is a problem. If enough people send feedback, it can become the problem solved as soon as possible.

  Your comments

• What does Err1 and Err3 when you restart your PC with Windows Vista?

  What does Err1 and Err3 when you restart your PC with Windows Vista?

  Hi MichaelNessel,

  1. What is the full error message that you receive?

  2. don't you make changes on the computer before this problem?

  3. What is the brand and model of the computer?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• What does offline or online when you say: servicing an image Windows 7 to add the new application online? and what is the difference between the online and offline maintenance image

  What does offline or online when you say: servicing an image Windows 7 to add the new application online? and what is the difference between the online and offline maintenance image

  Your question it will be better answered in forum Windows 7 installation and deployment on TechNet:

  Windows 7 installation, Setup, and Deployment Forum

• ntmsapi.dll missing when you use ntbackup.exe on windows 7 to recover my data from the windows xp ntbackup utility

  Hello, I was able to download ntbackup.exe on my computer, I just upgraded to windows 7 from windows xp.  However, I can't use the ntbackup.exe in windows 7.  But when I did, now I am unable to operate because the error message says missing ntmsapi.dll.  Can you guys send me the file or tell me where I can get it.

  Sincerely, Emmanuel

  Hello, I was able to download ntbackup.exe on my computer , I just upgraded to windows 7 from windows xp.  However, can not use the ntbackup.exe in windows 7.  But when I did, now I am unable to operate because the error message says missing ntmsapi.dll.  Can you guys send me the file or tell me where I can get it.

  Sincerely, Emmanuel

  Hello

  Windows 7 / 2008 R2 doesn't use NTBackup.exe to back up files. Instead, it uses SDCLT.exe (in %SystemRoot%\System32\sdclt.exe( ), which depends on the shadow copy volume service.
  
  
  If you do not want to install even when NTBackup.exe , you will need the files that you can get your Windows XP CD nt5backup.cab Cabinet or you can download them from the internet, then copy the files into a new folder (for example, copy the following files to %ProgramFiles%\NTBackup)
  • Ntbackup.exe
  • Ntmsapi.dll
  • Vssapi.dll
  • Ntbackup.chm
  • Ntbackup.hlp
  If you have an existing installation of copy of Windows XP is already installed, please copy the following copy in a new folder (for example, copy the following files to %ProgramFiles%\NTBackup)
  • %SystemRoot%\System32\Ntbackup.exe
  • %SystemRoot%\System32\Ntmsapi.dll
  • %SystemRoot%\System32\Vssapi.dll
  • %SystemRoot%\Help\Ntbackup.chm
  • %SystemRoot%\Help\Ntbackup.hlp

  NOTE: You may receive the following error when you start NTBackup.exe on Windows 7. This error can be ignored

  The backup utility cannot connect to the removable storage service. This service is required for use with tape drives and other backup devices.

  Please, get out and start the RSM service using the Services management console system function.

  
  
  Thank you
  I hope this helps :)

• How can I accept terms of use Live when you try to use the Windows 7 parental control features?

  * I have already connected to fss.live.com and https://familysafety.microsoft.com. This solution does not remedy the issue.* *.

  When you try to use the Windows 7 parental control features, it first asks you to connect to Live.  When I do, I get the 8004B3E9 error Code and it asks me to "connect to account.live.com and accept the terms of use.  However, in doing so, there are no terms of use for me to accept.  I also go to fss.live.come and familysaftely.microsoft.com and no option for the conditions of use is available to accept.  In addition, I tried different browsers.

  I can connect on Live.com and view my account easily, but without conditions of use prompt appears for me to accept, so my attempts to use the parental controls are stuck in this cycle, where it won't let me past without accepting conditions that do not seem to exist.

  How can I make sure I am set up as the account 'Parent '.

  Help, please

  3 hours later I'm finally able to access Family Safety. Thank you!

  The correct link to solve the "Terms of use" requirement is:http://g.live.com/0fsenus4/nexusmigrate

• When you print an image in Windows Photo Viewer, is there a way to do that is to ensure 'fit picture to the frame' * not * checked by default?

  Just as the title says:

  When you print an image in Windows Photo Viewer, is there a way to do that is to ensure 'fit picture to the frame' * not * checked by default?

  Hello

  It is normal in the Windows Photo Viewer Photo to adapt to the frame is checked.

  Print a photo

  http://Windows.Microsoft.com/en-us/Windows7/print-a-picture