Content Pack: Bar color graphic Tags & enable & E-mail JSON for alerts

Similar Questions

• AD and Windows content Packs

  I am using two of these content packs at the same time. I have the windows agent installed on all my domain controllers. However, the default widgets do not display data in my Windows content pack. They appear in the 'Presentation of security' section of the AD content pack. I can view the logs in the Interactive analysis, but they are not automatically placed under widgets.

  I noticed this warning for two content packs.

  Important: the following Insight Log agent configuration is required for this content pack work:

  Add the required tag ms_product following in the liagent.ini file to get results in thewidgets.
  Tags = {'ms_product': 'Active Directory'}

  
  

  Important : The following Insight Log agent configuration is required for this content pack work:

  Add the required tag ms_product following in the liagent.ini file to get results in widgets-

  Tags = {'ms_product': 'windows'}

  
  

  How am I supposed to put this tag in my liagent.ini file? I'm not sure of the correct syntax. I'm also not sure how to use two of these tags on the agent as duplicates are not allowed.

  
  

  Any help would be appreciated.

  Hmm, I think you're misunderstanding. Two content packs can and should be used at the same time. Each content pack requires a different agent configuration. Looks like you want to use Windows and Active Directory content on the same domain controller packs, right? If so, you need to use the TWO configurations on the agent on the domain controller. This means that the liagent.ini and add the following (and then two content packs will work - I hope this helps!):

  [winlog |] Request]
  Channel = Application
  Tags = {'ms_product': 'windows'}

  [winlog |] Security]
  Channel = security
  Tags = {'ms_product': 'windows'}

  [winlog |] System]
  Channel = System
  Tags = {'ms_product': 'windows'}

  [winlog |] DirectoryService]
  Channel = Directory Service
  Tags = {'ms_product': 'Active Directory'}
  

  [winlog |] DNS_Server]
  Channel = DNS server
  Tags = {'ms_product': 'Active Directory'}
  

  [winlog |] DFS_Replication]
  Channel = the DFS replication
  Tags = {'ms_product': 'Active Directory'}

  
  

• Address bar is no longer enabled when opening blank tab

  Since today, when I open a new tab (be it with ctrl + T or by clicking on the Green over a symbol), the address bar is no longer enabled, which means that I have to click it before you start typing. When I have about: newtab (the one with the tiles and the search bar) as a page by default (in browser.newtab.url), I can get to the search bar by pressing Tab, but this isn't what I want anyway. I tried to change the browser.newtab.url to about: white tips of a different issue, but it has not changed anything.

  So far I could just hit ctrl + T and start typing in the address bar, I found something very useful. Is it possible to resume?

  I didn't install anything, except perhaps a small number of libraries (Linux updated) automatic, but there is nothing that says firefox it as far as I can remember.

  If you have the Tile tabs extension, it happens to cause this problem. But version 13.1 released today resolves the problem.

  If you do not tile tabs but you have other extensions or themes, one of them might be the cause.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• having problems with dreamscene content packs

  I'm under Acer E380 with Windows Vista Ultimate, I bought later.  I tried to use Windows Update to download DreamScene Content Pack and #3.  These has failed with the error code of 807000D.  I have reviewed this code under Vista, but impossible to find an idea of what to do.

  I tried RegDefense and Dr. Fix It and still it does not load upwards I think I need to format the drive and try to reaload Vista.

  wjchagen,
  The first thing I would say is to download the update to your desktop and then install it from there.  This can help if there is a problem with the file does not download properly before trying to install.  Also if you run a firewall\antivirus program you can disable it if you download the file.  Sure, just that reactivate you.

  Try this and lets us know how it goes. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SharePoint content pack question

  Hello

  I'm actually setting up the SharePoint content pack, and I can't find the SPServerName.txt file in the scripts folder.  I have to edit this file to enter the name of the database server SharePoint.

  I downloaded the pack of content on the market but this file is not found.  I just can it create?

  Thank you.

  Yes you can just create it. Product market has a limit that we can not attach more than just the file content (PMLV) Unfortunately, pack you will need to download scripts, techniques and other vouchers via the exchange of the solution. I hope this helps. I've also attached the file here incase you need it.

• Content pack for MS Exchange scripts

  Hello

  I am currently installing and configuring the MS Exchange content pack on a server of Log Insight 3.0.

  I did the SMTP configuration on the Exchange Server, but I can't end the scripts that I have to copy it to the Exchange Server, as it says in the installation instructions:

  "Script ".
  

  Copy the scripts from the root directory of the archive downloaded Solution Exchange to its final location. "For example: C:\ProgramData\VMware\Log Insight Agent\exchange\"

  
  

  Where can I find these scripts?

  
  

  Thank you.
  

  Hello

  If you install the product content pack, you will only get the pack content and without supporting documents unfortunately file due to a limitation of the product. However, if download you it from the exchange solutions, then you should get a zip file containing the content as well as all documents supporting documents and scripts pack.

  Management of the clouds market | Solution Exchange

  Thank you

  -Jean-Marc.

• Log Insight publishing WorkFlow content Pack

  I used the Insight newspaper publisher to publish the contents of the pack. End of the publication, he gave me the ID (48ab-32556) and identification of email to contact for any other question.  However, I have got any e-mail communication to confirm the request for publication is received. I sent e-mail to [email protected] to check, have heard support either. So I wanted to make sure that I followed the right workflow for publishing new content pack.

  In one of the doc of LI he says link exchange solution allows you to publish, I did ' t find the option on the web link even after the connection.

  Any idea here would be appreciated. Thanks in advance

  Hello

  Looks like the editor has bug, I don't see any pack of content uploaded on the ftp site. If it is not a lot of trouble may ask you to zip the content pack and send to [email protected] alias?

  You can post on Exchange Solution only review and approval of the Insight CORD journal team.

  The process is explained in this document - Creation of content in vRealize newspaper Insight 2.5 Packs (also available on the Insight Community newspaper Documents tab)

  I look forward to the content in the e-mail pack, will review and get back to you. However, please note that most CORD team members are on leave week next because of Thanksgiving.

  Thank you.

• Wave error when you try to install a content pack

  I use Log Insight in a test environment and am unable to install content packs at all. I wish I could use Log Insight for business center and Application Services, but when I try to install their (or any other content package) on the market I have these unnecessary errors:

  

  I also tried to download packs of content from a browser and their importation, but that results in the same error. The role of my account is "Super Admin" so I don't think that is the question.

  Two suggestions:

  1.) Confirm synchronization time between * nodes ALL * LI * AND * between the client browser and the server of LI - if the time is not synchronized, it can lead to this error.

  2.) reboot the LI/cluster of nodes and try again

• LogInsight and view Horizon content Pack

  Hello

  I downloaded the Horizon view content Pack and have seen pointing to our instance of LogInsight.

  I see a lot of data analytics Interactive to see, but nothing through the content Pack.

  Is there a configuration additional post the content Pack download, for example the installation of the Agent on servers view?

  Thank you

  Richard.

  Hello

  Missed the extra details in the CLoud market place!

  Sorted.

  Richard.

• Brocade SAN Content Pack Setup

  I imported the content pack Brocade SAN into our insight of 1.5 log device. The SAN admin configure the redirection of syslog server network to advise to the switches through the IP address and port 514.

  After more than 24 hours, no data appears preview newspaper under the Brocade SAN dashboards.

  Is there another step, I'm missing? The documentation is sparse on this product.

  I thought about restarting the insight journal unit, but a warning appears on the hosts not being able to continue logging after loss of connection with the device, so I wanted to do only if absolutely necessary.

  Thank you

  Would you believe said SAN admin typed in the wrong IP address of the insight journal device? problem solved. human error.

  Thank you

• vCAC6 content Pack installation instructions

  I try to install the vCAC Log Insight Content Pack and tried to download the "vCAC 6.0 Content Pack for installation of Insight Log"document.  He asks me to register, I already did.  This is more than a day and I'm not able to receive the activation e-mail to activate the download of this document.  I wonder if someone has the same problem?  Or, better yet, maybe make the document public?

  Hey Rick, requests for Exchange of the Solution must be processed within three business days. The document is just a formalization of this blog so feel free to make reference to it in the meantime: vCAC logging to remote & #124; SFlanders.net

• Error FSX Gold - "the graphics card does not minimum requirements for support of shader."

  I just bought FSX Gold and I have installed two of them, but when I click to open it it says "the graphics card does not meet the minimum requirements for the support of shader. This product requires a geForce3/Radeon8500 class or a better graphics card. Flight Simulator will now quit. "I went to support to see what happened and he said the need Shader 1.1 or later so I checked my Shader and he said he was Shader 2.0. you guys can tell me what's wrong.

  Details:
  CPU -  Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz
  Speed of the CPU to 2.4 GHz Performance rated at: 5.28 GHz
  GB OF RAM - 6.0
  OS - Microsoft Windows Vista Home Premium Edition Service Pack 2 (build 6002), 64 - bit
  Video card - Intel (r) G33/G31 Express Chipset Family

  • Video RAM - 287.0 MB
  • 3D - Yes
  • Hardware T & L - No.
  • Pixel Shader Version - 2.0
  • Vertex Shader Version-2. 0a

  Version of DirectX-11, 0
  Sound Card - Realtek High Definition Audio
  Free disk space - 356.3
  DVD - ROM - HL-DT-ST DVD-RAM GH10L

  That's all. I hope you can help!

  Hi Man Com,.

  I suggest updating the video drivers from the manufacturer's Web site and make sure that direct X is enabled in the graphics card Control Panel conrtol.
  For more information, you can consult the following articles:
  Updated a hardware driver that is not working properly

  The problems of the game performance

  You can also read the following article and see if it helps.

  Solving graphic problems in Flight Simulator X

  Hope this information is useful.

• not all of the graphics appear on the screen. For example, on Google chip computer of today does not appear.

  Not all of the graphics appear on the screen. For example, on the homepage Google of today, the graphics chip does not appear. This site, http://www.conifer.jeffco.k12.co.us/conifer/html/index.html - current weather conditions should appear, but they don't.

  This problem was solved when I uninstalled and then installed the new version of JAVA. Thank you for the help you offered.

  WOW great work, I certainly would not have thought of JAVA animations used it but then I don't use "WeatherBug".

• Can I use Windows XP Service Pack 2 with Windows Vista Windows Live Mail?

  Can I use Windows XP Service Pack 2 with Windows Vista Windows Live Mail? Windows Live Mail is slow what it is first.

  And,

  can I change the Windows Live Mail to Internet Explorer without losing files in e-mail. If so, please send the instructions of deteiled.

  Thank you oldknight59

  Hello

  (1) what do you mean 'Can I use Windows XP Service Pack 2 with Windows Vista Windows Live Mail' ?

  (2) who is the provider of mail service?
  For problems with Windows Live mail, please ask your question in the windows live forum
  http://answers.Microsoft.com/en-us/windowslive/Forum
   
  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375
  Answer with the information required to help solve the problem.
   

• File bundle (MaintenanceMinder.bar) was rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in the bundle of original file.

  Hello

  I released maintenance Minder application in portal provider for smartphones (BBOS) and QNX.

  For mobile app OS QNX it is inconsistent in the name of the Organization, so I created new signing key, but I'm not download the latest version.

  error:

  File bundle (MaintenanceMinder.bar) was rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in the bundle of original file.

  Please remove this package so that I can give the latest version. If you need assistance please complete

  Hello perumala,.

  Please be more patient.  As per the response automatic you received when you are connected to a case of pension, the team will answer you within 24 to 48 hours.