Memory card causes problems

I have a new PRS - T1 and have devoted a 16 GB MicroSD card.

1. with the card in place, the device does not "remember" any book that he was reading, which is stored on the card and also, of course, do remember not what page it's on. He can remember books in main memory, but not those stored on the card.

2 with the card installed, whenever I press the HOME button, I get an error, "the Reader app has stopped unexpectedly. Please try again. "If I remove the card does not appear this error.

Resetting the device made no difference.
The firmware tells me that it is up-to-date.

I had been using the MicroSD card on my MP3 player for several months, with no problems, so I don't think that a faulty card is the problem. (I deleted it before putting it in the Sony drive).

What can I do to solve these two problems?

I have a card in my reader too and that you are not experiencing these problems.
Have you tried to format the card in the reader?
You will lose all data on the card, so I suggest you to save on your PC first and then copy the map after formatting.

Tags: Sony Products

Similar Questions

  • Memory card reader problem

    I have a HP Pavilion dv5-2134us running Windows 7, 64 bit.  In the past, worked the small memory card reader to the front.  It does not now.  There must be a switch somewhere in the device manager - not to conclude.  There must be some downloadable HP driver - was not found.

    1. There is absolutely no problem with the camera (s).  Same model, several units.

    2. There is absolutely no problem with the memory chips.  Down them on another laptop HP as well last night.

    3. I checked to see if pins were crooked on the card reader-not.

    What is the solution?

    I need a specific link to windows 7 Home Premium, 64-bit driver for the memory chip card reader.

    I need a specific way to find the on/off switch in the Device Manager.

    If you run the operating systems Windows 95, 98 and old, be aware that Microsoft has changed names, places and so on.  So, tell someone what has worked 5 years ago may not work today.

    Hi @bdcochran01 ,

    Thank you for visiting the Forums HP's Support and welcome. I read on your HP Pavilion dv5-2134us Entertainment Notebookand of problems with a memory card or a player.  Here is a document on the memory card reader troubleshooting.

    Sometimes, Windows 7 will not allow any change in the drivers here is a solution for this.

    First of all, try to click on the Windows icon, type services in the start search box, and then click or tap on the advice of local Services. Scroll down to the Windows Installer. Startup type must be - automatic and the service status should be - started
    Restart the computer after this stage and try to reinstall.

    Here is a link to the software for the Alcor Micro Card Reader, to make sure that it is installed.

    I hope this helps.

    Thank you.

  • memory card slot problems

    The memory card slot reads 'no photos on memory card' when it is inserted into the slot... He used to work very well... it just started it a month or two it y a. I have a HP psc 2175 all-in-one printer. Is - fixable? Thank you

    Have you tried another card?

    If the card used to work have tried in any other device to see if it will read it?

    If you buy another card SD Please note

    New memory cards are SD HC card, if they are greater than 2 GB.

    This printer will not read SD HC, that they were not avalible when this printer was designed originally.

    The printer will show 1 GB and 2 GB cards very well that these are not the high capacity cards, there are some 4 GB not HC cards around, but they are very rare.

    Sorry it's a physical restraint of an older printer.

  • The modernization Pavilion dv8t 16 GB memory will cause problems?

    I have a HP Pavilion dv8t Quad Edition Series Notebook PC, product number: VF836AV. The maximum amount of memory that can be installed in it is 8 GB, according to the operating instructions. I recently replaced the original 8 GB with 16 GB of memory, and the 16 GB is recognized automatically. The Windows system information report now shows that the installed physical memory is 16.0 GB and total physical memory is 16.0 GB. In addition, the original memory installed in the PC has been Crucial DDR3 PC3-10600 of type, and I replaced it with a Crucial DDR3 PC3-12800 memory of type. However, the newly installed 12800 DDR3 memory does not work at its full rated speed, it runs at the same speed as the original memory. There seems to be no problem with the configuration of the improved memory, but I can't help but wonder why the manual (and even Crucial memory Advisory tool) says that the maximum installed memory should be 8 GB. Memory of 16 GB currently installed will cause damage or some other problem in the long term?

    Hello:

    A few other people have installed 16 GB of memory in their notebooks with 1st generation i7 quad cores and reported no problems at all.

    I would be not the least bit concerned the performance of 16 GB in your mobile life.

    The reason why that memory does not run at 1600 MHz is...

    Memory can only run as fast as the processor FSB speed which, in the case of yours is 1333 MHz (10600).

    If the 12800 memory simply downlclocked to match the speed of the processor.

    Not until you get to the Intel 3rd generation I series with an Intel 7 series chipset processors memory runs at 1600 MHz.

    So there is nothing wrong at all to your situation.

  • Lightroom CC does not launch when inserted memory card

    After installing Lightroom CC I can't get Lightroom to automatically launch when a memory card is inserted.  The option is enabled in the settings menu of Lightroom.  On my PC under AutoPlay, I have the option open with Lightroom 6.0 64 which is CC in Lightroom to my knowledge.  However, when you insert a memory card I get an error that says F:\ Application not found.  I can go into Lightroom and select import files from a memory card without problem.

    Thank you.

    I had this problem and I was able to fix by changing the Windows registry (it was only a minor change).

    I changed the value of the following registry key:

    HKEY_CLASSES_ROOT\Adobe.AdobeLightroom64\shell\open\command

    The value is:

    C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.7\Lightroom.exe "%".

    I changed it to:

    C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe '% '.

  • get the error message"Windows Media Player has encountered a problem while playing the file. "When tying to play videos on my memory card

    get the error message"Windows Media Player has encountered a problem while playing the file. "When you try to play videos on my memory card

    Hello

    1. What is the format of the video file you are trying to play?

    2. do you have any third party audio or video codec installed?

    Follow these methods.

    Method 1:  Run the troubleshooter in the Windows Media Player settings.

    Troubleshooting looking for issues related to playback of audio and video files in the drive by checking its configuration and network parameters.

    Open the troubleshooting Windows Media Player settings Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Method 2:
    If you have installed any third-party codec or plug-in for Windows Media Player, uninstall them temporarily to check if they are causing the problem.

  • problems with Prem El 14 with 4 k make export and record... ghoulish 2 video on the laptop cards be causing problems?

    Had problems with the 4 video editing k with an old laptop i5 with memory on board and recently bought what I thought would be a better laptop computer editing video.  The ASUS GL552VX laptop has a 6700 CPU i7, a solid state drive OS, 16 GB of RAM and a NVIDIA GTX 960 video m with 4 GB memory card

    Unfortunately I had problems frustrating edition of 4 videos k on the ASUS and export to 4 k with my new Setup.  It seems to work well with 1080 media

    When I try to export the edited 4 k media on the timeline, it will not be saved or export but indicates simply is to save but a 4 minute video is same not start saving /rendering, not to mention export after an hour.  Finally, I thought that was my success today, but he ceased to save 93% during the export.

    When reviewing similar since 4 k problems posted on this forum, our expert resident, Romano advises that the 960 M will not help with first items 14 and that the NVIDIA card can actually cause a problem because the second mother 'onboard' Council on the ASUS video card.  There is little other info on it except a mention that power off of one of the video cards may be useful.

    If Mr.  Romano or any other users of knowlefgable or experts can throw some lite on my k problems 4 it would be greatly appreciated

    PROBLEM SOLVED! ??

    Reduce the resolution of 4 k display my laptop computer ASUS 1920 x 1080, adjusting the W10 to 125% and NVIDAS and INTELs scaler directly download site and tried to update the graphic display ASUS drivers two.

    Three things or a combination did the trick!  Note: I had put previousll to update the drivers through driver latest ASUS Web site post utility, but read that drivers should always be downloaded directly from the manufacturer's Web sites.

    Video test 4K have been edited in Prem El and exported to 4 k without a hitch.

    Crossing my fingers that I could solve the problem

  • Satellite A300-1NO - Player cards and SD memory card problem

    Hello!

    There are a few problems with the card reader built into my A300 1NO. If I put an SD (SD or SDHC) inside, he wants to recognize the cards as the XD memory cards. In Device Manager window is therefore a "Ricoh xD-Picture Card Disk Device" listed here, with a yellow exclamation point, and the card is not at all as by car.
    With Memory Sticks, there is no problem, the player manages them almost without problem.

    I tried reinstalling the drivers by running the installation program "Ricoh Card Reader", which is downloadable from the toshiba site, but it did not help.

    So what's next?

    Hello!

    Did you remove the old driver before installing a more recent?
    And you can format the SD card using the Toshiba SD memory?

    Normally, the card reader must be able to read SD and SDHC cards too. Have you tried the cards from different manufacturers?
    I use the SanDisk Extreme III cards, and don t have problem with these cards.

    Good bye

  • the scan to memory card problem

    I have a HP C4180 all-in-one printer.  Having a problem with scanning on memory card.  Gives message that the memory card is not found, although it is in the appropriate slot.

    Hello PJ65,

    Welcome to the HP Forums!

    I understand that your Photosmart C4180 is not read the memory card. I will do my best to help you! Please follow this document from HP on the memory card troubleshooting. Additionally, make sure that the printer is connected to a live wall, not a surge protector.

    If you encounter the same problem, contact HP technical support for further assistance. Click here to read: worldwide Contact HP.

    Good luck.

  • problem with memory card reader

    bought an Acer C720 Chromebook in July, nine.  Now problems with memory card reader.  Sometimes he reads, sometimes it won't.  This can be corrected?

    Hi PatPeoples84,

    Yes it is possible, unfortunately it will probably come during the service.

    I recommend you contact the provider of the guarantee. In the United States, refurbished products are managed by another institution as new products. If you have any questions, thinking to send me a private message with your serial number and I'll help you get the correct coordinates.

    Thank you
    Cory

  • Problem with 16 GB Sandisk memory card

    Hi all

    I just bought a Clip Zip and use a Sandisk memory card to use with it. Unfortunately, while most of the library, there are a few artists who don't. I tried moving them on the player's memory, and then they operate, so it seems to be a problem reading the card, rather than the tags of the files. I bought the card from Amazon, so I eliminated the possibility that it might be a fake card. Does anyone have any suggestions as to what may be the problem?
    Thank you very much for your help!

    How many records you on the drive? Keep inmind that the zip has a database of song 8000 limit. anything above 8000 will not be crawled and appear not in the menu. If you have less than 8000 files can you put some of the bad files so we can take a look?

  • SanDisk 4 GB Ultra II Compactflash (15 MB/sec) capacity memory card problem

    I have Canon EOS 350 d (Rebel XT) and Sandisk 4 GB Ultra II Compactflash (15 MB/s) memory card and I was using this card with my camera almost 3 years.

    I have no problem and it has worked great so far.

    This is my problem: I am inserting my Sandisk 4 GB Ultra II Compactflash (15 MB/s) memory card to my camera and start shooting. After 70-80 photos he says CF card is full!

    When I insert the card into the card reader on my computer (which was the same computer and the same card reader), it shows that 1 GB of the card is full, but when I check the properties of the map on my PC it shows 4 GB...

    I have already formatted (FAT32) and tried the same results, but it... It gets only 1 GB of photos...

    I tried to format it in different formats E.g., FAT, FAT32... Same result...

    I don't know if it's related but 3 months ago I bought a USB card reader so I can transfer my pictures on my laptop when I travel... It's called Sunpak 72 in 1 card reader... I used my card with this drive, and it is the quick read as HELL! I was very happy with it, but now I think that if this card reader is originally anyting? I don't know maybe not relevant...

    While the guys do you think? What can be the problem and what could be the solution?

    Thank you in advance...

    Best regards...

    Here's something you can try to test the map. put it in the computer and format it. Make sure that the map shows the amount of space available. This should be 3.75 GB of something similar. If it's showing corectly then use computer data and copy of the card. Fill the card completely full. Then look at the properties and see if the card can be filled to capacity.

  • Problems with e250 and SD memory card?

    Basic information about the player: e250, 2 gig, version 1, 01.02.24 has

    Basic information on the SD card: Sandisk micro SD, 2 GB

    I have my sansa for a year and a half, and I have never had any major problems with it so far.  Recently, I had to remove the songs to put on the new songs due to lack of memory, so I decided to buy a memory card for it.  Getting the empty memory card I inserted and recognized my drive and everything was fine.  The problems started when I put songs on the memory card.

    I put my player in MSC mode (as indicated in the manual), it is hooked to my computer (windows XP), and everything was fine.  I used windows media player to synchronize music on the memory card, then picked up my drive.  It is restarted, as he should, and I went to listen to music I would put right on and yet once again, it was fine.  Then, I wanted to listen to my music, and he flipped out on me and wouldn't let me play it.  After determining that it was not just this song, I removed the memory card and tried to play the old music, but he would always let me.  A small red box saying 'Wrong way' just kept popping up.

    I decided to start over, so I have deleted all of the player (via the computer) and then attempted to deliver music on.  I tried a few songs, sync and play the two media of windows and my computer says that the songs were on the player.  To get the player from the computer, I went to "songs" and saw that it was always empty.  I hung up, and the computer says that these songs are on the player.

    In a nutshell: my computer says it is synchronization of the songs to the player, but in reality, it isn't.  This has only started to happen after I had the memory card.

    If someone could help me, that would be great.  Thank you!

    I don't think that Windows Media Player will work in players v1 in MSC mode. It must be in MTP mode for WMP to recognize. In addition, with the cards in players v1, you HAVE to add/remove music in MSC mode only by drag and drop from your computer to the card (read as a drive in Windows Explorer). You have to treat the reader and the card as the "separate entities", even if physically they are connected. Once music is on the map, the player will fit perfectly on both songs.

    In what concerns the "bad tracks", you need to run CHKDSK to repair corrupt files, so you can remove them properly. Answer NO when it asks you if you want to save the files "bad strings" (or something like that). Check the 'sticky' & the FAQ at the top of the body for specific instructions on running CHKDSK. While you're at it, also check out & play on your player of formatting, as you should probably next to you to go to a clean slate.

    I believe that files (songs) put on using WMP in MTP mode can ONLY be played in this mode, and MSC placed files using drag ' drop can be read in THAT mode, which can be part of your problem. Probably best to start fresh and then don't forget you must manually put the songs on the map in MSC mode.

    Another oddity of SD cards (at least with players of v1) is that you must also manually add the 'album art' to the file containing the music if you want to see the album art that song. With WMP and MTP mode on the player, it will play the album art embedded in the ID3tag. It will not do this on the SD card . You can see specific instructions on how to do it here. There is also a video showing the procedure here.

    I hope this helps...

  • can not sync music to any memory card in Windows Media Player due to the error Windows encountered a problem when synchronizing the file to the device.

    Original title: can not sync music to any Windows Media Player memory card

    This has not happened before, but now, whenever I want to sync music to any memory card, it does not work. It makes the whole process, and it did as it syncs, but at the end of that music just does not appear in the memory card. If I go to the status of the synchronization, all songs appear with a RED x next and it says that Windows has encountered a problem during the synchronization of the file to the device. How can I fix it? as I said before, this has not happened before.

    Hi UlloaC,

    See the steps mentioned in the link below that relates to a similar question

    http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.6001.7000&ID=C00D1236&ContextId=211&OriginalID=C00D1179

    See also the link below

    How can I fix sync errors?

  • Problems pictures copies of Flash memory card and USB drive under Vista 64 files

    Hi, when I insert a flash memory card (SanDisk 8 GB SDHC or SanDisk 2 GB Compact Flash) either by inserting the card into a card reader, AutoPlay comes on but the image transfer stops after a few images have been copied to any program (Windows, Picasa, etc.). I chose to copy the files. Same experience when I connect the camera with the memory card in the camera using the USB cable to the PC. I tried to re - format camera memory cards, but it has no effect.
    Also, I feel the same when I try to copy from a USB flash drive (the drive is basic, not a U3 key).
    I have a HP Pavilion m9400t Elite desktop running Vista Home Premium 64-bit. I own this desktop computer for a year and I've always had this problem. I have no problem using these flash memory cards and a USB drive on my old XP PC or an Apple Mac Book. For what I can tell, my Vista desktop is set for automatic windows and updates from HP. Everything about the plan of updating drivers, etc., which would solve this problem would be appreciated.
    Thank you
    Srini

    Hi Srini,

    one) that you get specific error messages when images are arrested to copy?

    (b) what is the file format of the pictures\files that are not copied? What images are copied with success?

    To narrow the problem, please follow the steps mentioned below:

    O copy the pictures manually on the flash memory card Office.

    O connect the flash memory card\ camera to the back of the computer (for a different USB (port universal serial bus) and try to copy the pictures\files.)

    O check if the photos are in double version:

    Windows detects your newest pictures and doesn't matter the duplicate versions of the old photos that you've already copied to your computer

     

    He may want to know:

    How can I get pictures from my camera to my computer?

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

    Troubleshoot camera connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for