continious loop

Similar Questions

• Simulation does not stop in the Loop Simulation & control

  I'm working on a settlement in a loop of control & Simulation. I created a State space model and an inside observer.

  Now, I've implemented nearlly all, but now the simulation does not stop.

  First here is a picture of the .vi when it still works:

  

  But this isn't the end result, I want to have.

  I want to connect the output of the subtrahation (2 x - y) at the entrance to the exterior product.

  You can see from the image below:

  

  If I do, my continious simulation and never stops. The simulation time is always set to 10 sec.

  The .vi is attached. I hope someone can help me.

  I don't understand your suggestion. I've set up a node of your comments, but this does not solve the problem.

  But I found another solution to the problem. I build the .vi completely new and used the arithmetic of the design group Signal and control Simulation. The gain block and the summation block works better in my case that digital add and multiply the blocks. Now, the tracks of the simulation and the regulation works well.

• Music loop help

  Well what I have here is a real simple, fast loading script to listen to an MP3 for music throughout the whole of the site that I built. What I need to do, is make this music loop (repeat continiously) unless you press Stop. The entire fla file consists of 1 frame with 2 layers.
  
  (1) the Scipt action below.
  (2) the command buttons.
  
  Is there an easy addition to add to my script to allow music loop... Music plays on the charge. If somone presses 'Stop' it stops. If somone pressed 'Play' he will play again and looping.
  
  Action Script:
  var height: Sound = new Sound();
  tune.loadSound ("breathe2.mp3", true);
  tune. Start();
  
  play_mc.onPress = function() {}
  tune. Stop();
  tune. Start();
  }
  
  stop_mc.onPress = function() {}
  tune. Stop();
  }
  
  
  Thanks for any help on this.
  
  See you soon!
  
  TRI0N

  Only the sound object allows you to declare the number of times where the music playing loops?

  tune. Start (secondsOffset, loops);

  Just give him a number that will probably never drive like 100000

  tune. Start (0, 10000);

  If the music of your website is say a minute in length, so it's 10000 minutes of playing time.

• iMac 2012 - sierra installation failed, caught in the loop, please help

  Hey everybody.

  That's what I have:

  iMac 27 "mid-2011. He had on El Capitan.

  This iMac contains two hard drives and drive superdrive.

  A disc is 256 GB SSD and the other a regular 2 TB internal HARD drive.

  As SSD is faster that I keep my OS X and programs on this SSD drive, all the other stuff like photos, music, documents, are put on the classic 2 TB HDD.

  This is what happened:

  Attempt of I:

  Everything was going well until the installer has discovered that the SSD did not have a sufficient space to install. I quit the installer, the option pop up, I called "Startup Volume" has chosen my SSD and restarted it. Has been 2 attempts, if I'm not wrong, but worked. I killed and moved the files, I think now would be enough disk space on my SSD tried the Sierra ad install again.

  --> Attempt II:

  This time Sierra Installer arrived at the stage language choose where he welcomed and asked to choose the language. The next screen it tells me once again: not enough space, the bigger internal drive offers enough, but I don't want that. So, I tried the same exit to leave the program and launch then boot Volume installation...

  ... that in trouble:

  My SSD drive now no longer appears in this window of the boot Volume.

  When you try to access the boot Volume it will skip in the app language choose, sometimes shows this window choice animation multilingual, sometimes simply stays gray but will show when moving the mouse upwards arrow to the top of the screen, choose language drops in when I try to open the boot Volume after leaving the installation program. In addition, the language choice (can not be exited by cmd Q is said by the way) seems to open before the boot app Volume and the boot volume app does not appear my drive more-> Catastropheeeeee!

  Also option to restart regular off the menu above will not help. After about half to the top of the boot of the SIERRA Installer keeps new hindsight. No chance to reboot to my previous El Capitan based OSX. I am bound to this loop.

  Is turned off, wait and switch back to does not help, even in a loop.

  Then I tried also open disk utility, I also have an external time machine backup drive connected. Tried this way to restore my SSD of time machine, which fails on every attempt.

  I'm totally caught up.

  Help, please!

  just in case.

  I did the job.

  Launched my iMac in disc mode on my mac pro book. A few items to the disc hard iMac deleted, then restarted, macos sierra resumed and concluded correctly, in other words: all and working again!

  Even a message to Apple to look bad when insufficient disk space is detected, see my first post, thanks.

  Best regards

  Max

• Boot Loop iPhone 5 c problem

  So that's how iphone got a uppdate iTunes, but after she got into a boot loop.

  The phone can be switched on using the on/off switch, but it can be disabled by using only the power on + combo home buton!

  Powers on but right phone at the apple logo, it stay there for 3 seconds then the apple logo fades to grey (like an LCD) broken then there restarts... and that on and so on... until the battery is empty.

  The phone goes into DFU mode, itunes acknowledged, but after itunes launch the iphone in dfu mode, itunes says "waiting for iphone", the phone restarts, but instead to continue the restore procedure, it penetrates into the same loop and after 10 minutes, itunes gives error.

  The phone is out of warranty, and I want to record just because it seems perfect, no sign of use!

  Oh and another thing, I tried to put another apple original battery (I hade a new brand in hand 6!) did not work...

  So guys I came to you for your review. Be free to say what you think that will fix this poor iphone!

  I was about to say to make an appointment at the genius bar. They would try to restore it for you free of charge...

  Then I saw your mention of trying to put a new battery in there... If you have physically opened the phone upwards, it is technically unbearable and completely untouchable by Apple. I couldn't hurt to consider anyway and see if they can get it to restore, but you can kiss all hopes for a farewell to replace security exit.

• SWIFT playgrounds, how to Code 2, build a loop, I can not find isOnGem

  Swift playgrounds, how to Code 2, build a loop, I can not all isOnGem. What Miss me? If I am not mistaken, is it a bug? How should I declare?

  I can't figure out how to solve the puzzle without this.

  isOnGem is not available as an option in the box to scroll so just type in from the table instead. If you enter exactly the same case, it will be recognized as legal code when you run your program.

• Note looping in GarageBand

  In GarageBand, I did a recording of me just sing a long note and want to loop an entire song so the note sounds even longer.  But when I do that, whenever the loop again it makes a little noise, hard to explain, but even if I cut the beginning and the end of the recording, he does always a little sound whenever he performs a loop itself and I don't know what to do. Y at - it a setting I can change to stop? I want it to look like a long drone.

  To what you want to achieve, you must to crossfade regions to create transitions smoothly between them. Unfortunately, GarageBand doesn't have the ability to fade or crossafe Audio regions (Logic Pro X). However, all is not lost, there is a solution, you can do the same thing with automation.

  Look at the screenshot to understand the procedure.

  • Create two Audio tracks
  • The first Audio track has the area of your voice recording audio
  • Apply the Volume Automation to increase the level at the beginning of the region and lower end of the region.
  • Now copy (Option-do drag) this region in the second piece so the end of the first area overlaps the beginning of this region. Automation is copied with the region.
  • Now select the region on the first track and the area (you just copied) on the second track and the Option-do drag to the right to copy both of them, yet once for the region of second and third overlap.
  • Keep this copy procedure as long as you need it to be.

  As you can see, when a region Faints, the other region on the road to spare fades, create a crossfade without welding.

  

  You play a little to find the right length for automation to come in and out and also how to straddle the regions.

  I explain details of the automation and the rest of my book of GarageBand. ""X GarageBand - how it works".

  A tip:

  Instead of having a linear Automation curve between two Automation Control Points (the points), you can create logarithmic shapes by Ctrl + Shift + drag the line between two Control Points. Drag left/right for s-shape or high-low exponential curves. It will look something like this (sh + ctr + click on the line to linear curve).

  

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Try to connect to my yahoo on Safari takes me in a continuous loop to the login page. It works very well with Firefix.

  Try to connect to my Yahoo on Safari brings back me in a continuous loop to the login page. My registration using Firefox works fine.

  IM using ios10 on an iPhone 6 s

• iMac 27 stuck boot loop

  my 27-in. Imac is stuck in a boot loop.  It goes to the start screen, I see the Apple logo and progress bar, then the screen has a line go overboard and it restarts. Attached picture to show you the screen, any help would be great. Thank you!

  Try to start in safe mode, try safe mode if your Mac does not commissioning - Apple Support

• Apple Loops of old Logic Pro Logic Studio

  Hello

  my iMac still run osx 10.7.5 (Mountain Lion).

  I intend to upgrade to the Mavericks, and my question is: move to Logic Studio is any chance to keep all my old loops in Logic Pro and use them with the new version?

  (I have a number of pieces using specific loops and Yes, I know that I can save the loops in the songs but I would not lose my whole library)

  I really hope so.

  Thanks in advance,

  Franz

  I'm sorry, I don't talk about logic X, here, not of Logic Studio.

  My mistake.

• How to create a loop off the track

  Hi guys, hope you can help me

  I wrote some pretty nice pieces in the section of the track, I would turn to the loops. Here's the problem - option "copy, paste" does not at all. Is there any other way to make a loop of piece of music created as a track?

  Thank you and best regards,
  Bart

  Using GarageBand on an iPhone, iPad or Mac? And which version?

  And what kind of parts you want to loop?

  On the iPad, you can cut an area dividing and cutting the section that you want to loop and then set loop, see: http://help.apple.com/garageband/ipad/2.0/index.html#chsec12c15d

  Of the loop region

  • Click on the region to select it.
  • Tap the area again, tap loops region Loop.The until the end of the section of the song, or until the beginning of the next region in the same way. You can change how long it loop by dragging the right edge of the area.

  Not all areas can be pasted:

  You can paste parts copied on another track with the same Instrument to touch. You can also paste regions between keyboard and Sampler tracks and the tracks Audio Recorder and guitar amp. Battery intelligent regions are unable to be glued to the other battery Smart track. Copied audio files of another application can be glued to the Audio recorder or tracks of guitar amp.

• loop infinite Avira & mail

  Everyone knows the avira / mail loop?

  Avira deletes an email with an attachment that is dangerous.

  Mail redownloads.

  Infinite loop.

  Freezes in the post.

  Only solution is to disable avira, kill the mail.

  Delete the message and re - activate aviria.

  The other option is to uninstall Avira as it is unnecessary and only serves to slow down your Mac.

• OSX Boot loops after booting in to Win10 via Bootcamp

  Hello

  I did a clean install of Mac OS x 10.11.6.  After execution of all updates I used migration assistant to bring my userdata and apps.  Then I installed Pro Win8 x 64 via bootcamp.  From there, I upgraded to Win10 Pro x 64.  Win10 works great!

  Once I shut down and go to start back in to OSX, it boot to loops.  Chimes, starts loading osx restart... repeat.   I started in recovery mode and have already told him to use OSX as a boot drive, and it always starts loops.   Reinstalling OS 10.11 via the internet recovering toured, until I decide to use Windows again.  He eats also 30 minutes of my time just to get OSX running again.

  Any advice? I have the Win10 feeling is something EFI settings?  Help, please.

  Try to use Boot Camp to uninstall Windows and then see if you get a normal startup. If so, try to reinstall Windows using Boot Camp.

• My ipod said zero KB available and used zero KB. It does not synchronize without going into an endless loop.

  IPod Classic 160 GB to 2009.  Will be out of sync without going into an endless loop.  Settings on Ipod suggest zero KB used and zero KB available.  No music is on IPOD even though I had over 5000 songs on it.

  1. is this a hard drive failure?

  2. If I I I fixit?

  3. it cannot be replaced as Mr. Cook wants me to buy more new Apple toys which will be break and not be supported.  Best advice?  (BTW, the sarcasm is due to a Imac turns is not on and engineering said: I had to buy a new computer my Imac was too old and is no longer supported.)  Tired of this song.  ((  )

  1. very likely given the age

  2. not worth your time

  I had an original iPod classic that lasted nine years, but eventually had to replace it. No material lasts forever.

• Apple missing loops loops?

  Am I missing some Apple loops loops? I can't find a strike simple triangle or a scan of a tambourain (chime). I need one of these for a project.

  Any suggestions?

  Thank you!

  I just found one a former project of logic. I imported to the new Apple Loops library.