"Continue" button at the end of quiz

Similar Questions

• How to make the output project of "Continue" button on the attempt of quiz results page

  When the quiz on the project is completed, on the results of the quiz slide it has a button to continue to press, but seems no value since it becomes just a black screen when you are finished instead of close the project as you think it should. Any suggestions on how to do that affects the project?

  Closing projects only works reliably when the publication in EXE format.  Often Web browser security prevents content windows SWF/HTM being closed in the same way.

  Try placing a slide AFTER your quiz slides so that the button continue has a place to go.  Then change your preferences > project > start and end > project end Options > Action close project.  In this way, the project tries to close naturally, only not in a row by clicking a button.  You can do this last slide as short as you want, but a second or more is generally good, just in case you have preferences set to Fade Out on last slide.

• The 'New tab' button at the end of the tab bar disappeared and I don't know how to bring it back.

  The 'New tab' button at the end of the tab bar disappeared and I don't know how to bring it back.

  See:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  If you use the same profile with different versions of Firefox folder, then create a new profile exclusively for version 4.0 beta and create a shortcut on the desktop with Pei 'profile' attached to the target to launch this profile.

  • http://KB.mozillazine.org/Testing_pre-release_versions
  • http://KB.mozillazine.org/Profile_Manager#Creating_a_new_profile
  • http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
  • http://KB.mozillazine.org/Shortcut_to_a_specific_profile
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

• How can I get the continue button on the Quiz results page to work?

  I found an old discussion about this and tried everything suggested. My colleague and I have done the research on this issue and have not yet found the answer. Someone out there has the solution?

  OK, should have posted the most links:

  http://blog.lilybiri.com/why-i-like-shape-buttons-Captivate-6

  http://blog.lilybiri.com/toggle-shape-buttons

  Form buttons are my favorite feature of Captivate 6. I also presented a Webinar on their subject for Adobe.

  You can mark the thread as answered?  I think that there is useful information for other users.

• On the output not an option at the end of quiz question slide?

  I would like to show a slide between quiz questions - to add further explanation to the answer. I thought I could jump to slide out, show the extra slide and jump in when.  But leaving is grayed out and allow me to use it.

  What I am doing wrong?  What is a 'feature' of Captivate 5?

  Thank you

  Hi CindieG,

  'Disbled 'OnSlide Exit' action' for a question slide is 'designed '. The only way to leave a question slide is to 'Submit' the slide with correct/false answers; and it executes the actions of success/failure as a result.

  Thank you

  nsukumar.

• using advanced actions to make a button appear at the end of my project - HELP

  I'm working to build a set of advanced actions, which allow a user display the buttons at the end of the test based on the responses of the text entry box. The plan that I've discovered so far is:

  1. on the slide after the TEB, I have a conditional action that uses IF cpQuizInfoLastSlidePointScored = 1, and THEN assign the Variable 1 to 1 (the variable is set to 0)

  2. at the end of the test, I have an advance action that declares the variable = 1 IF THEN hide button (the button says they did hide the bad action means they did as the correct input) ELSE view button

  I have a total of 23 of these interactions TEB

  Everything works perfectly if each answer is correct

  Everything works perfectly if each answer is wrong

  Arrises them problem when alone or some answers are wrong. When that happens, no buttons appear.

  I built a debug slide and be positive for each Variable, I built received the first interaction.

  so, what could I have done wrong on my process? Any help would be appreciated.

  Always nice to hear from someone who likes my book.

  A thing, you have not made it clear to me yet.  You say that you are running the first action 'at the entrance to the next slide. I guess you mean using the event YOU enter the quiz question slide slide follows?

  Then, you mention that "at the end of the process," you have a blank slide that performs the final conditional action.  I assume that you mean that you use the event YOU enter Slide for the Quiz results slide where your buttons is displayed?  You won't be able to perform actions SHOW/HIDE objects on slides other than the one where the action is executed.

  My personal preference to set the variables on each quiz slide would be to use the event on the success of the quiz slide just to set the variable directly instead of using a decision of conditional action block as you did. If your quiz questions are all together for a moment of success, then just using the action of success WE should have the same result, but it's just more direct and so less inclined to any question (for example if, for some reason, the system cpQuizInfo variable did not work, your event on success should always pulled).

  In theory, your way (using the system variable) should work too, but sometimes if there are several ways to do something and your current path does not work, try them the other way around can get out you of trouble.

  I guess that your final conditional action has something ELSE for each block of decision which SHOWS the button?

  One thing that also that Lilybiri would probably say, that you are trying to rename all your blocks of decision in the last conditional action.  It could be one of the names of your decision blocks is originally a kind of conflict.  I noticed that you have a name of decision block with a punctuation of hash character.  Not a good idea.

• The ADF tree fades after adding a button after the tag from the tree of the ADF

  I have a tree ADF that will have a few Groups (parent) and issues (child), it displays the content properly, now I have to add a button at the end of the page, so when I added a button on the page is shrunk and I see two bars vertical and horizontal scrolling for the part Questions and groups. but I want the content to be displayed correctly, and at the end the button should available.
  
  I tried width ADF Stretch and addition of the tree and the key to all the different types of components, but they did not work.
  
  Can you please suggest me a way to do this?
  
  The jsp page looks like this:
  
  < af:form >
  < af:tree - >
  < f: facet name = "nodeStamp" >
  
  < af:outputText value = "#{node." GrpDesc}"id ="ot1">
  
  < af:outputText value = "#{node." QstnDesc}"id ="ot2">
  
  
  <!- and I have a few components of selectOneRadio here, which will be displayed for each question >
  
  < / af:tree >
  
  <! Here, I added a button and I have actions defined for it >
  
  < text af:commandButton = "save and continue".
  ID = "cb2" / >
  
  < / af:form >
  
  
  
  
  
  
  Thank you
  Jean Lou
  
  Published by: user12217808 on April 27, 2012 04:55

  Before adding a status bar button, you will need to place a toolbar item.

  PanelCollection is a naming container. If you try to access your tree by ID, you need to add ID of panelCollection and: entry. As "tree1"-> "pc1:tree1".
  I think that panelCollection itself cant' break the queried data.

• Button on the main timeline control movieclip

  Hello

  I have a stop in my main script. At the stop, I have a play of movieclip. In the movieclip, I'll have a video playback. After playing the video, I have a button for the user to continue playing until the end of the movieclip. Once the movieclip is done, I want back the return to a specific image in my main script.

  I can't figure out how to make this work. Anyone have any ideas?

  Thanks in advance,

  Paul

  How much of what you just described in currently working properly?

  If it's just the last step to have the game finished main scenario the movieclip, then you might have an event listener assigned to this movieclip in the main timeline.  When the movieclip ends it can send an event of this listener that can trigger an event handler function in the main timeline to tell the main scenario for continued as planned.

  Another less glamorous but more compact approach might be to have a drive inside / at the end of the movieclip to order the main scenario of an act using something like...

  MovieClip (parent) .gotoAndPlay (whatever);

• BlackBerry Smartphones four main buttons on the torch 9800 do not work

  I didn't have on my phone for about 2 days and when I went on that four main buttons (green call button, bb button and the end call/lap button on / off), they were not involved. I can't understand what is wrong, /:

  Welcome, Alexia!

  First of all, we will try to battery pull good adic.  With your device powered on, remove the battery for a few minutes, then replace.  If that does not receive your buttons work again, I suggest you take the device to where you bought it and exchange it for another, because it is defective.

  See you soon!

• Add the button with the email icon

  Hello

  I want to add a button at the end of my PDF doc to send the doc.

  I use shell: addField ith 'button' as the fieldType property.

  How can I specify the following:

  • layout set to: top, bottom label icon
  • set the label of 'send form '.
  • together and specific icon in a png file
  • Set the action on 'submit form '.
  • Set trigger Select "Mouse Up"

  Or maybe to see all this, how can I see ALL of the form and it has function of properties? This would allow me to see the appropriate properties to set.

  Thank you

  The main idea of a forum is to help people to find solutions, not to do their work for them...

  It's really not hard to find what you are looking for. I'll help you with these items on you questions:

  • layout set to: top, bottom label icon-> property of the Field object buttonPosition.
  • set the label of 'send form'-> the method buttonSetCaption of the Field object.
  • specific icon in a png file and all-> methods buttonSetIcon or buttonImportIcon of the Field object.
  • set the action to "submit a form"-> is not not possible.»» You can only assign a JS command by using a script. But you can use JS to submit the document, using the method of the Document object submitForm.
  • Set select trigger "Mouse Up"-> setAction of the Field object method.

• I work with Elements14.  I finished a project that is 04:00 long.  My CTI continues to operate beyond the end point of the video and music and transformed the project in 10 minutes long!

  Here's what I did: on the track of music, I ran the excessive music, no return at the end of the clip I used.  I also used the CTI scissors to cut the surplus, and I deleted it.  I have a click with the button straight on the ICT and found the add point final cmd and he added.  But, CTI continues to flow to the bottom of all tracks... Finally to 10 minutes more.  Apparently, there is something on one of the tracks that the CTI keep following, but it is not visible on the voice track, music or video tracks.  What have I done wrong?

  

• Displays a button on the quiz results slide

  Use 6 Captivate, I show a "print" on the quiz results slide key only if the user passes the quiz. I tried setting the action in the Quiz > success or failure of the settings to display the button (with a tip action) passed the test but still no luck. On the results for the "print" key slide, I disabled the 'Visible output. Any ideas?

  You can download a complete list with the system variables of: System variables in Captivate 8 - Captivate blog

  The variable system quiz, you will need to use a conditional action is cpQuizInfoPassFail, which is a Boolean value, cannot have two values 1 or 0 (failure) (past).

  Use the event to enter the Score slide to trigger a conditional, tip action

  IF cpQuizInfoPassFail is equal to 1

  See the Bt_Print

  Continue

  ON THE OTHER

  Continue

• Insert a button on the review Quiz page?

  I am using captivate 7. I want to hide the button submit on the review page and have a custom button that I am able to add advanced actions. Is this possible? Is it also possible to use a function of calendar on the review page. Ideally what I'm trying to do, is to have a message and prevent anyone to click on the button continue until after that that they have read the message. Once they have clicked on the button continue, I would like a message appears on the screen asking if they printed their results. Yes, will be continued on the next page. Don't get back to the review page to give them the ability to print.

  Is this possible? If so, how?

  Hello

  You can not insert the button on the question slide and quiz results slide.

  However, you can insert intelligent use of form and check a box under its properties, and then under Actions > hit > you can set execute advanced action.

  In your scenario, it seems that you must create a conditional action using if - else conditions.

  Kind regards

  Ajit

• When you use the buttons to generate points of quiz - can problems with cpQuizInfoPointsscored anyone help?

  Hello

  I am putting together that a test is several sections which must give "advice" on measure to users based on their interactions across multiple slides.  I tried this several ways but can get anything to work for my needs.

  Is closer to just using the keys to generate some test scores (each button can be given an individual score for generating marked differently from interactions on each page) and then attempt to deliver scenarios advice branched using advanced actions 'if cpQuizInfoPointsscored variable if' less/more than... etc go slide....  I'm frustrated by the fact that the cpQuizInfoPointsscored variable does not seem to pick up dozens of buttons, even if you include the points in the quiz and these scores come out at the end of the quiz or the results page.

  These scores are obviously stored somewhere - is it variable anther I can go to read these scores at some point and branch a scenario in response?  Is there another way to do this?

  See you soon,.

  Matt

  I would recommend that you create your own user variables to measure the success of the interactions and then use the values of these variables to trigger the branching of fast Action.  As you have seen, some score is computed only once you get to the Quiz results slide.  Having your own variables will give you more freedom to do what you please.

• Having MovieSymbol to continue to operate even after mouse at the ends

  So I have a button that when I mouse over animation begins... Unfortunely when I move the mouse when the button is the animation abruptly ends...

  I would like to allow him to play the entire animation... no matter where currently the mouse...

  Also what I could possibly need is for her permanent loop the animation once the button has been said on:

  WHY: I'm making it so when you hover over the button the button "work away from you" making it almost impossible to click on

  Thank you very much

  Stephen

  If you place objects inside the 4 frames of a button, which is an instance of the class SimpleButton.  Let's call it a button for easier Talkin '.  Button symbols have features of builtin providing for automatic rollover and rollout behaviors without code. Probably, you do not want to use a button symbol and can just go out with the help of a button as a movieclip symbol image.

  If the main purpose of the animation must evade the user, then an approach strictly actionscript might work better.  This one was a bit fun to continue just for ha ha's, so I fiddled with a sample file you can watch / study.  I don't expect that you'll understand, at least not at the first glance, but it shows a (probably crude) way to make a button that allows to avoid the mouse cursor.  Some of the other people who help here regularly will probably have more than sophisticated solutions.

  In this version... There is an invisible (alpha = 0) area surrounding the image that adds in bulk to the movieclip as getting close the image will generate the rollover event.  When this event occurs, two actionscript tweens are highlighted that the movieclip move to some new random x and y which are sufficiently far enough to avoid the postponement of the being held if all goes well (which would stop the movieclip under the cursor, if she did not move very far)

  Anyway, here is the link to the file...

  http://www.nedwebs.com/Flash/AS3_Avoid.fla