Continued use of digital dashboard to stop a generation pulse train

Similar Questions

• Problem to stop the task of continuous using API C DAQMx data acquisition

  I'm doing the acquisition of data in the PCIe-6536 continuously using DAQMx C API. But whenever I try to erase the task and put end to my application, program stops and it is not completed by the Task Manager and task killer applications. Can someone help me with this?

  Sameer

  Hi John,.

  Thank you for your concerns. the example attached also created the same problem. Then I run the test of the device to the MAX and it failed. Then I realized that there is something wrong with the installation. I simply uninstalled the card and installed on the other PCI-e slot. This time, self test has been successful and so did my request.

  So my problem has been resolved

  Again thank you for your quick response.

  Sameer

• Digital start and stop trigger with restart HW

  Hello

  I am trying to write a program that reads continually samples based on the rise and fall of a digital triggering.  I want the measure to start on the front of the trigger and stop on the falling edge of the trigger.  I want the data that are read to be preserved and then added with the next set of data that the trigger rises again.  I have read the tutorial "Digital start and stop trigger" and can use the reference to stop the measurement process and I looked at the example "Acq & chart voltage - Int Clk - HW Trig restarts ' that comes with LabVIEW and I can get the two of them working separately with my request.  I'm quite confused however try to put the two together (see attachment).

  If I put a "Start.vi" icon inside the while loop then I get an error "you can do this while the measure is still ongoing".  If I put it out of the loop and then the process only runs once.  I tried to put a loop structure case for restart only if necessary, but this has produced another error which the source escapes me.  Is there a standard way to do this and if so someone can point me in the direction of an example?

  See you soon,.

  Glen

  I think that in this situation, it would be preferable to use a Pause trigger.  You can use the break to stop the acquisition when the trigger was low and start when the trigger is high.  In this way, served only for the duration of your trigger pulse.  I've attached a screenshot of a VI that illustrates this principle in action.

• Digital card reader stopped working

  If anyone can help?

  I used my digital card of Pavilion laptops, G6 reader successfully, but on Saturday, he has not stopped working and does no more SD cards.

  I remember installing a Winodws update last week, could it have stopped the work card reader?

  The portable computer product id is C7S92EA #ABU if this helps someone

  Problem sorting apparently Windows decided that after an update there not like the card reader so disabled, managed to re - activate via Device Manager

• Why continue those class Scheduler start and stop every half hour approximately

  Why continue those class Scheduler start and stop every half hour approximately. I am fortunate to have a sound event for the event program open and this event is triggered by Multimedia Class Scheduler, it seems, every half hour.
  Is this normal?
  Can I disable it?

  James

  Hello

  Service Multimedia Class Scheduler (MMCSS) allows multimedia applications to ensure that time-sensitive processing receives priority access to the CPU resources. This service allows multimedia applications to use CPU as possible without denying CPU for low-priority applications as well.

  This service is required only for the fact that the Windows Audio service lists this as a dependency. Without the Windows Audio service, no audio signal will play on the system. This service is started when the system starts, but shortly after (~ 8 minutes), it stops.

  This is a Notification which will start with all programs that use Windows Audio. For an example if you open Windows Media Player, then multimedia class scheduler also starts because it uses the windows audio.

• everytime I open my macbook it asks me to "Enter your password to continue using iCloud" and even when I enter the password, it is as it badly and within 5 seconds asking me to type it in again... What do I do?

  everytime I open my macbook it asks me to "Enter your password to continue using iCloud" and even when I enter the password, it is as it badly and within 5 seconds asking me to type it in again... What do I do?

  The iCloud in system preferences pane shows that you are connected?

• How to use the digital TV tuner on Qosmio G30?

  Hello, I recently got a qosmio G30-175. Could someone tell me how I can use the digital TV tuner mode qosmio player? Thank you

  Hello

  You won't like this, but unfortunately the digital tuner is not a musician Qosmio option.

  QosmioPlayer software is actually quite limited you really need to start Windows Media Center to get all the features of your machine which is a shame. There is always a chance toshiba can update the software of PS in time to take into account items such as the digital tuner.

  Despite this, you still have one of the best phones on the market, so I would like to concentrate on that.
  :-)

  Kind regards

  Mark

  Post edited by: Mark Nettleton

• Photosmart C4580: c4580 scan to pc error 4 [(3,42,0)] Digital Image Monitor stops working.

  Scan to pc error4 [(3,42,0)] Digital Image Monitor stops working.

  Scan Doctor repairs DI Monitor and she immediately stop woring

  before I even try a scan.

  I run hpqtra08.exe which initializes the DI monitor and after a few seconds it stops working again.

  C4500 removed and downloaded software problem persists.

  Help!

  Hi @jere99,.

  Welcome to the Forums of HP Support!

• U8 array used in digital form with 0.1 Hz for each array index

  Hello

  I am trying to write a code that allows me to output an array of 36'000 U8 values to an NI USB-6009 digital output.

  The problem starts as soon as I try to set the clock should be 0.1 Hz send me 3600 seconds on my 36 k samples.

  Looks like it's not possible to use DAQmx Digital Out as well as a specific sample clock (or I do something wong).

  Does anyone know a clever solution to this problem? How do they give you a dataset defined with a low of given frequency the digital port?

  Thanks in advance!

  RuferT wrote:

  Ah... Thank you, Jeff!

  Indeed, I need a few accurancy in switching of signals (Timewhise).

  Is it possible with an NI USB-6216 to use somehow the clock shipped equipment to trigger the next table sent to the digital output index?

  I found evidence for it, but by the data sheet, this device also has static DIOs. If I understand your message, static DIOs are the kilelr for my app, right?

  What is the killer for your application is the source of command DIO.  Timed software DIO won't work with high precision, if you need for the material to something that supports triggering of the OID material - in USB format which means a USB 625 x for a M-series or a x 634 for the X series (beware the series 6341 x only supports timing on 1 port material - check the specs for yourself before decide you)

• I need to get a certificate to continue using WI - FI how di I find the certificate?

  I need to get a certificate to continue using WI - FI how di I find the certificate?

  Original title: WiFi problem

  Hello

   
   
  1. who is the operating system installed on your computer?
  2. What is the exact error message that you receive?
  3. who is your Internet service provider?  Have you tried to contact them about this?
   
   
  Follow the steps mentioned below and check if that helps.
   
  Method 1: You can check if the router is configured for WPA and WPA2 connection:
  a. If the router is configured for WPA and the configuration of your wireless network on your computer must be configured the same way. That is to say, WPA.
  (b) if the router is configured for WPA2, then the configuration of your wireless network on your computer must be configured the same way. That is to say, WPA2.
   
   
   
   
  Method 2: You can manually disable authentication IEEE 802. 1 x. Subsequently, re - enable authentication IEEE 802. 1 x and see if the problem still occurs.
   
  See: If you use a NETGEAR wireless router, you can follow this link:
  Unable to connect to the network: Validation and certificate in Windows XP and Vista errors
  http://support.NETGEAR.com/app/answers/detail/A_ID/7334/~/unable-to-connect-to-network%3A-validation-and-certificate-errors-in-Windows-XP
   
   
  Reference: Use certificates for security and privacy
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/cert_ovr.mspx?mfr=true
   
   
   

• I want to use the digital books from the library, but Explorer encounters a problem and needs to close when I try to get the security update.

  I want to use the digital books in the library. When I try to use the link below to get the media player update security, as soon as I got to the page, I get a a get several times the same error - Internet Explorer has encountered a problem and must be closed and the page goes dead. Explorer trys to regen of the page, but it keeps getting an error. What should I do now?

  You can download the upgrade of Windows Media Play Security 2.5.0.1 under the following link.
  
  The security component upgrade
  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  Hello

  Follow the steps below and check, if it helps:

  1 reset the management of digital rights (DRM):

  a. Click Start, click Run, type explorer.exe and then click OK.

  b. on the Tools menu, click on Folder Options and then click the view tab.

  (c) in the area of advanced settings, under hidden files and folders, click Show hidden files and folders.

  d. clear the skin protected operating system files check box and then click OK.

  e. Locate the DRM folder on the hard drive. The DRM folder is usually located at the following location: C:\Documents and Settings\All Users\DRM Windows

  f. rename the folder to DRMbackup DRM.

  2 remove the DRM registry key:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  a. close all open Windows Explorer Windows.

  b. Click Start and then click Run.

  (c) in the Open box, type regedit and then click OK.

  d. look for, and then click the following registry subkey:

  e. HKEY_LOCAL_MACHINE\Software\Microsoft\DRM

  f. remove the key and restart the computer

• Can I use a digital voice recorder with windows speech recognition

  I want to use a digital voice recorder to transcribe in Windows Vista or windows 7 speech recognition. So far, I only got responses like 'Use Dragon'. I don't want to use Dragon! I want to use my trained and perfectly good windows Vista or Windows 7 built into the software. Please, anyone, just a direct response. I will buy from any digital voice recorder can transcribe Windows.  I am well aware that I can use dragon so please don't keep advise me. I travel a lot and do not always have access to a pc equipped with dragon or tablets. But I still have windows vista or windows 7 built in. Would be very happy a good answer (and any settings if necessary >) thanks guys.

  Hello

  I suggest you check with the Windows Compatibility Center, to check what digital voice recorder is compatible with Windows 7 and Windows Vista, since the following links and you can use these digital voice recorders.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=digital%20voice%20recorder&type=hardware

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=hardware&s=digital%20voice%20recorder

  Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• The server that you are connected using a security certificate which cannot be verified... The name main target is incorrect... You want to continue using this server?

  All new computer running windows 7 64 bit, outlook and office 2007 installed, initial problems with the temporary user profiles, follow up advice and removed user profiles in the system registry and all seemed to go well. Computer works for about a week with two user profiles and now all of a sudden I get an error message when I start Outlook and from time to time when you browse the internet, it reads:

  The server that you are connected using a security certificate which cannot be verified... The name main target is incorrect... You want to continue using this server? (If I hit Yes then I can send emails)

  When I open view certificate it says: this root CA certificate is not approved. To enable trust, install this certificate into the store certificate authorities roots of trust. (Attributed to and: Cisco device demo certificate - valid from 10/02/2009 to 03/10/2019).

  Problem is I don't know what the certificate is, what I need, to find out how locate, how to move etc, I have read a few forums, but they are starting to be too technical. I need help for step by step easy.

  I tried to uninstall outlook 2007 and reloading and clearing of the States of ssl in internet options, and then reset by default (as someone suggested), but it made no difference.

  Problem is when you leave the store with the new computer, nobody wants to know you if you need assistance!

  Can someone please help? Thank you

  Hello

  Welcome.

  Just a tip, never download and install anything on your PC, unless you know and trust him.

  > «Computer brand new...» I need help for step by step easy. »

  Contact the PC manufacturer emphatically support team.

  > ".. . Office 2007 installed...

  Support to the: http://answers.microsoft.com/en-us/office/default.aspx#tab=1 and ask your question in Outlook it.

  You can also check if this problem occurs when you use Windows Live Mail, which can be downloaded on: http://download.live.com/wlmail.

  > «Server that you are connected using a security certificate which cannot be verified...» »

  Just learn more about the certification of server to the: http://en.wikipedia.org/wiki/Certificate_server .

  Remember: keep the system tools and security update.

  Success.

  Rgds.

  itconcerned

• If we want only subscribe to Adobe Illustrator CC, is there an effect on our ability to continue using products other than Illustrator CS4?

  If we want only subscribe to Adobe Illustrator CC, is there an effect on our ability to continue using products other than Illustrator CS4?

  Hello karleas73464285,

  everything should be good.

  Best regards

  Maurice

• Is it possible to continue using the LR app for iPhone without having to pay (after the 30 day track)?

  Is it possible to continue using the LR app for iPhone without having to pay (after the 30 day track)?

  Without having to pay US $ 149 - or 9.90 per month?

  I'd really like to get a positive feedback.

  Thanks in advance!

  The latest mobile versions are free to use, but for a full synchronization with Office LR CC is required.

  LR Mobile without subscription