Continuous beep on Satellite Pro 4600

Similar Questions

• Satellite Pro 4600, I can hear a beep

  When I use my Satellite Pro 4600 to record and playback, I can hear a beep. How can I stop this?

  Yes, this can happen when you use a Satellite Pro 4600 to record sound via Microsoft Sound Recorder. A beep low but regular (and irritating) occur during playback. You are using Windows 98 to Windows 2000 or?

• Satellite Pro 4600: beep when the headphones are connected

  Greetings to everyone.

  I feel a strange audio problem with my Toshiba Satellite Pro 4600 headphone output port. Whenever headphones are used, bursts of low beep occur regularly every 3 seconds or so superimposed on what playing right now. Each burst lasts about one second and consists of about 8 fast beeps. The beeps occur after Windows starts and end once the system off. I thought that it was a driver issue, but I use the latest driver for my card, downloaded from the site Web of Toshiba (package name: s5105sndx.exe).

  Can anyone help?

  Thank you for your attention.

  This problem doesn't appear if the headphone is plugged or also with the speakers if the headphones are disconnected?

  If this happens only if the headphone is connected if there is something wrong with the headphone jack.

• Resume the failed Satellite Pro 4600

  Hello

  I get a message "Press any key to resume failure continues" every time I powere to the top of my Satellite Pro 4600. It then remains on a white screen and I am unable to do anything. Someone at - it suggestions on how to solve this problem?

  Thank you very much!

  Hello

  Check if the BIOS is set to RESUME (function that remember have been closed and continue on this same place).

  To do this: when the TOSHIBA logo is shown be very quickly press the ESC key a short time.
  You should get an error message and press F1 to enter BIOS. Search for Power-up mode (or something very similar). Set it to BOOT.

  If it is already set to BOOT, or it does not help, try pressing the reset button when the screen is empty as you say. You should find it on the, I think that, left side of the machine. Look closely on the sides. You should find a small hole.

  Good luck

  Tom

• Satellite Pro 4600 - CPU overheating graphics card?

  16 days ago my tosh Satellite Pro 4600 has lost the ability to maintain 25 fps in a game online - IE. Diablo 2.
  He now plays to an average of 4 frames per second and ping gets up to more than 4,000... Needless to say that now, unplayable...

  I reinstalled the game... installed new XP and game on the D drive...
  Same thing... a program called SpeedswitchXP shows CPU use fluctuating 54 to 420, because the clocked processor slot general tab of my computer displays 422 now, not the 847 mhz it used to.

  Still, he surfed on the net and plays yahoo games of cards for example. at lightning speed, but not a rpg online... there work perfectly at 25 fps on average for 3 years... Irretrievably overheating / damaged CPU, graphics card?
  Anyone know? Another temp. program shown running at 64 c is worth a new motherboard?

  I can get one? Any ideas?

  Hello

  First of all, he should know that the processor and GPU performance are dynamically.
  This means that the speed and the performance changes if the temperature reaches a critical threshold.
  This could lead to performance degradation.

  In your case, the laptop is about 3 years old and I think that it s time to clean the fans to prevent the notebook from overheating.

  You can try to use the jet of professional compressed air to get rid of dust and debris.
  Such spays you can buy computer retailer.

• Display driver for Satellite Pro 4600 necessary

  My brother has a pretty old Satellite Pro 4600 [model number is PS460E-0C8X7-FR]

  He needs a Win98 SE display driver - the problem is that I can't find his laptop on the pages of downloads model.

  Suggestions very welcome please!

  Thank you

  Hello

  Visit the download page for Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  As product type select ARCHIVE. All that s!

• Cannot change the contrast, brightness, etc. on Satellite Pro 4600. Help please.

  I can't control the contrast, brightness, Saturation etc... using the control panel of Trident in my Satellite Pro 4600. Could someone help me to activate these controls?
  Thanks in advance
  Andrea

  Hello Andrea,

  normally, you can change this settigs in the Panel, but to explain the way to change this would be nice to know what operating system you have installed.

  If you have the perinstalled Os, it might be that you have Win2000.

  Win2000:

  Go to the control panel - display - Advanced control and then you could choose between video, color or television.

  The Brightess could be changed to energy-saving, because the brightness depends on your setting of power.
  Battery high brightness mode could reduce your battery power!

  Bye Bob

• Satellite Pro 4600, memory upgrade

  I have twice had problems trying to upgrade memory to my Satellite Pro 4600, so I decided to ask directly if Kingston KTC-SO133/256 MB is compatible with this machine?

  It's the SODIMM I'm about to try next, but I have to pay for it first.

  Problems were that the SODIMM modules is not compatible with the wonderful piece of memory or it won't work at all with Toshiba.

  Is there an availave list what type of bars of memory are compatible?

  Sorry, I can tell you that I use the Original from Toshiba 'PA3069U - 1 M 25' memory (its a KIT of MEMORY of 256 MB)

  works great!

• Satellite Pro 4600 unable to use 128-bit encryption

  I have a Satellite Pro 4600 running Windows XP SP1 with the card WiFi PA0307U-1MPC. Installed all the latest drivers listed for the 4600. I can connect to networks using 64-bit encryption, but can not enter the 128-bit encryption. Is it possible to use 128-bit encryption?

  Hello.

  As far as I know that this unit is about 4 years old and at that time, it was impossible to use encryption 128-bit with this wireless network card and can be no change.

  Good bye

• Satellite Pro 4600: Wireless lan driver for Win XP

  Hello

  I have a Toshiba Satellite Pro 4600 with a built-in wireless lan mini pci card. My problem is that I only have Windows XP! But in the toshiba Download Center, there is only the driver for Windows 2 k. What can I do to use the complete wireless lan card controlled? There is a wireless lan client Manager program under Win 2 k called. Can someone help me?

  Good bye

  A.

  [Edited by: admin on 5 August 05 23:00]

  Hello

  Basically, the WIFI connection can be configured using settings in Windows and it is not necessary to use a WLAN client software.

  Good bye

• Satellite Pro 4600 cannot load the BIOS update

  Satellite Pro 4600. When starting I access Windows 2000 screen and then get the blue screen "The ACPI BIOS in this system is not fully compatible with ACPI." Please contact etc etc for BIOS updated. I downloaded version of update of the BIOS 2.60 since the Toshiba site and installed with a message "installed successfully". I always get the "bluescreen". Where I'm going wrong? Help would be appreciated.

  Y at - it the ability to boot the operating system in safe mode? It works correctly?

  Did you have a new installation Win2000?
  Give us more information.

• Satellite Pro 4600 - no sound on Windows XP SP3

  Hello

  The 2 drivers in the download section do not work. Everest shows me that there is no Audio Windows (service started) and Intel 82801BAM ICH2-M - AC 97 Audio Controller [B-2] PCI.
  No driver is now installed.

  Any ideas?

  Hi stanbulino,

  Have you installed SP3 before installing the audio driver?

  I n t have Satellite Pro 4600 so I can t say much about it, but you need to install the first chipset driver, then the audio driver.

  Also, make sure that the Windows Audio Service is started.

• Satellite Pro 4600: Question about upgrade RAM, CPU, motherboard

  Hello

  I have a SP4600 and because I love this machine, I want to give him the chance to stay with me - but unfortunately, it will only work by increasing its performance...

  Is anyone here has made some experiences in upgrading a SP4600 more than 512 MB of RAM?
  I know that this machine uses PC100 SD - RAM that is available up to 256 MB.
  But someone has tried successfully to put in PC133 memory? And if so, to were the limit?

  And more: what about the upgrade of the rest, for example, the CPU or the whole motherboard?
  Currently, his heart beats with 700 Mhz (Celeron). Would it be as easy as just another graft?
  Or would it be easier to exchange the whole motherboard?
  I've never done anything like this before and I'm not sure how the rest of the system can react on these interventions, in particular because the we-board-video and sound on board...

  I would be delighted if someone could give me some positive feedback on these issues...

  Hello

  You can only use the memory 100 Mhz modules because the FSB is limited to 100 MHz.
  If you use 133 Mhz modules, they will work only at 100 Mhz.

  You can upgrade the satellite Pro 4600 until 512 MB (2x256MB)
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=28447&ft=m&St=3

  Other devices such as the CPU or GPU are not extensible and the motherboard may be replaced only with the same motherboard

  Finally, you should know that the laptop technology is a little different and you can't compare it with any desktop computer. You can update some parts such as the memory or HARD drive, but that s all the

• Satellite Pro 4600: Win2k with SP4 - cooler run all the time

  Hello

  last week, I bought a used Toshiba Satellite Pro 4600 PIII, 1 GHz, 512 GB of Ram, WIFI and DVD burner. Great machine so far.

  After that I changed the FAT32 file system to NTFS and reinstalled Win2K/SP4 cooler runs all the time.

  TaskManager says that "THOT_KEY.exe" uses up 99% of the CPU power. Disabling this service reduces the power of the processor and the cooler was quite, BUT didn't really helped - lots of keys does not work.

  I ran a few utilities to disinfect as Kaspersky, NOD32 etc. to ensure that Ia´ve not taken some malware.
  Should I try a bios update or change some settings?

  Any ideas?

  Thanks for help

  Hello

  AFAIK the THOT_KEY.exe belongs to the Toshiba Hotkey utility that controls the various key functions.
  If you disable this service, you will not be able to use the FN keys more.
  I m not 100% sure why this service uses 99% of CPU performance, but perhaps that it s not completely compatible with the W2K service packs. Where did you download this utility? I found it on the page of Toshiba Europe!

  In my opinion, you should try to reinstall the system again. This is probably the key!

  Good luck

• Screen broken on Satellite Pro 4600

  Several years ago, we broke the monitor on our laptop Satellite Pro 4600 computer series. Yesterday, that I took it out to connect to TV and see what data (especially photos), we had on what I was able to backup to an external drive. However, it doesn't start. I only see one tiny bit of the message displayed: "* bad ' and on the next line"check knew. "

  I tried to boot with the disk support, but it does not work. By pressing Fn + F5 does not control the settings of the monitor with her in this State, I can't see the full mesdage. I'd rather not use the recovery and the Configuration Builder CD because I want to see my files...

  Any ideas?

  Thank you very much.

  Hi King_2,

  the quick and easy way:
  -go and get a usb-to-ide-usb adapter
  -Take out the hard drive and
  -connect with the adapter usb to another machine
  now, you have access to all your files!

  the long way:
  -Connect a monitor to the machine
  -Make sure that the external monitor is your primary display
  -check the bios and set date/time
  -pray
  -try to boot your operating system
  -course data on external hard drive

  This adapter is about 15 euros, and you can use it more than once!