continuous data range algorithm

Similar Questions

• GROUP BY date range to identify duplicates revisited!

  Good afternoon

  It is a continuation of the previous discussion, I previously created GROUP BY date range to identify duplicates

  Your help with the following would be appreciated (examples of data below)

  I've highlighted what I mark as returned to double as below:

  

  Definition of duplicate (However, this is slightly different to the previous post)

  the same account_num

  maximum 20 days apart tran_effective_date

  tran_processed_date maximum 10 days apart

  the same tran_amount

  However, I do not want to return a duplicate if they have both a tran_priced_date filled.

  So, in light of the foregoing, I don't expect the following account_numbers to be marked as duplicate:

  N100283 - one of the records has populated trab_priced_date

  N101640 - none of the records have the tran_priced_date filled

  N102395 - same as N101640

  N102827 - same as N101640

  N108876 - although the two documents have the populated tran_priced_date, the tran_effective_dates are more than 20 days apart.

  BUT for the rest of the accounts, N100284 and N102396 I want to execute the following logic

  Compare the 3rd rank in 4th place and ask the following questions:

  Is tran_effective_date to a maximum of 20 days out?

  Is tran_processed_date maximum 10 days apart?

  If yes then report it as dupe

  Compare line 4 to 5, then ask the same question until you get to the line 4 or 5. When everything is done, I want to examine only the transactions that have the status of normal and if the above question is true for both and then return to my game of result as dupes.

  I hope that makes sense!

  BEGIN
    EXECUTE IMMEDIATE 'DROP TABLE samp_data';
  EXCEPTION
    WHEN OTHERS THEN
      IF SQLCODE = -942 THEN
        DBMS_OUTPUT.put_line('');
      ELSE
        RAISE;
      END IF;
  END;
  /
  
  
  CREATE TABLE samp_data (
    ACCOUNT_NUM             VARCHAR2(17),
    TRAN_ID                 NUMBER(10),
    TRAN_TYPE               VARCHAR2(50),
    TRAN_EFFECTIVE_DATE     TIMESTAMP(6),
    TRAN_PROCESSED_DATE     TIMESTAMP(6),
    TRAN_STATUS             VARCHAR2(17),
    TRAN_PRICED_DATE        TIMESTAMP(6),
    TRAN_AMOUNT             NUMBER(13,2)
    );
  /
  
  
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N100283',140119178,'Regular With',to_timestamp('01-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('22-MAY-15 07.00.34.235000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', to_timestamp('21-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),200);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE,TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N100283',140158525,'Regular With',to_timestamp('13-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('26-MAY-15 08.39.14.090000000 AM','DD-MON-RR HH.MI.SS.FF AM'),'Normal', null,200);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N100284',140118826,'Regular With',to_timestamp('03-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('22-MAY-15 07.00.19.072000000 AM','DD-MON-RR HH.MI.SS.FF AM'),'Normal', to_timestamp('20-MAY-15 03.25.05.438000000 AM','DD-MON-RR HH.MI.SS.FF AM'),450);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N100284',140158120,'Regular With',to_timestamp('06-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('23-MAY-15 08.38.42.064000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Reversed', to_timestamp('21-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),450);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N100284',140158120,'Regular With',to_timestamp('06-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('02-JUN-15 08.38.42.064000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', to_timestamp('31-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),450);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N101640',140118957,'Regular With',to_timestamp('18-MAY-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('22-MAY-15 07.00.25.015000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', null,120);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N101640',140158278,'Regular With',to_timestamp('22-MAY-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('26-MAY-15 08.38.56.228000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', null,130);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102395',140118842,'Regular With',to_timestamp('03-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('22-MAY-15 07.00.19.665000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', null,250);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102395',140158235,'Regular With',to_timestamp('03-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('26-MAY-15 08.38.53.093000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', null,250);
  
  
  
  
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102396',140118823,'Regular With',to_timestamp('09-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('18-MAY-15 07.00.18.931000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', to_timestamp('19-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),750);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102396',140158099,'Regular With',to_timestamp('16-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('24-MAY-15 08.38.39.443000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Reversed', to_timestamp('21-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),750);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102396',140158099,'Regular With',to_timestamp('16-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('29-MAY-15 08.38.39.443000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', to_timestamp('30-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),750);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102396',140158099,'Regular With',to_timestamp('12-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('22-MAY-15 08.38.39.443000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Reversed', to_timestamp('30-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),750);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102396',140158099,'Regular With',to_timestamp('14-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('23-MAY-15 08.38.39.443000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Reversed', to_timestamp('30-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),750);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102827',140118850,'Regular With',to_timestamp('03-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('22-MAY-15 07.00.20.045000000 AM','DD-MON-RR HH.MI.SS.FF AM') , 'Normal',null,157.84);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102827',140158118,'Regular With',to_timestamp('03-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('26-MAY-15 08.38.41.861000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', null,157.84);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N108876',139840720,'Regular With',to_timestamp('01-MAY-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('11-MAY-15 08.35.34.646000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', to_timestamp('20-MAY-15 03.25.05.438000000 AM','DD-MON-RR HH.MI.SS.FF AM'),1000);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N108876',139889880,'Regular With',to_timestamp('22-MAY-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('12-MAY-15 08.49.29.080000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', to_timestamp('21-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),1000);
  /
  
  
  select * from samp_data
  ORDER BY account_num, tran_effective_date, tran_processed_date;
  

  PL continue the discussion in your original post

• How to pass the date range as in URL filter go

  Hello
  
  I am trying to build a Url go that has two filters, date range & text. I built the url below, but he continues to throw an error. The url is not from the date max and the app starts following error:
  
  Error: Status: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 46048] Month DateTime value 0 0000-00-00 is off limits. (HY000)
  
  Go to Url: https:companyUrl? GB & Options = rfd & Path = / shared/CompanyID/link & P0 = 2 & P1 = eq & P2=CustomObject4.%22Indexed%20Pick%201%22 & P3 = Leasing & bet = P4 & P5 = ""-CustomObject4 Custom Attributes '. " ZDate_26 & P6 = 2 + Date % 20'2014-08-01'+ day % 20'2014-12-31'
  
  
  Please suggest.
  
  Thank you
  Kiran.

  It seems that you convert the data type of char to date in the URL, I don't think that this is possible.
  Your code is like
  & P6 = 2 + Date % 20'2014-08-01'+ day % 20'2014-12-31'

  It suppose to be & P6 = 2 + 2014-08-01 + 2014-12-31

  I suggest doing the formatting for this filed using column properties and try.

  Hope this help, pls mark if yes ;)

• How to merge two date ranges

  Hello
  I have the rest of the table. I want to merge the date ranges if dates are continuous and the value is the same. I use Oracle 10 g. Help, please.
  
  START_DATE END_DATE VALUE
  ----------------------------------------------------------------
  
  1/1/2008 12/31/2008 1234
  1/1/2009 12/31/2009 1234
  
  
  Exit statement SQL must be as follows:
  
  
  START_DATE END_DATE VALUE
  ----------------------------------------------------------------
  
  1/1/2008 12/31/2009 1234
  
  
  
  Thanks in advance.
  
  Published by: user3898545 on January 27, 2010 19:44

  Hello

  user3898545 wrote:
  Hello
  Dates will not overlap but sometimes start_date can be equal to end_date in a row.

  Sorry, I'm not sure of that figure.
  If the query I posted is not giving correct results, post some samples (CREATE TABLE and INSERT statements are best, but a clause WITH as Tubby displayed is correct) and the correct results, you need these data.

  Please suggest if something needs to be done through pl/sql performance is also the key.

  I don't see how the PL/SQL will help in this problem.

  When two lines need to be combined, the end_date ranked sooner than always exactly 24 hours before the start_date on the line later?
  If so:

  WITH     got_grp         AS
  (
       SELECT     data.*
       ,     end_date - SUM (end_date + 1 - start_date) OVER ( PARTITION BY  val
                                                                   ORDER BY       start_date
                                              ) AS grp
       FROM     data
  )
  SELECT       MIN (start_date)     AS start_date
  ,       MAX (end_date)     AS end_date
  ,       val
  FROM       got_grp
  GROUP BY  val
  ,            grp
  ORDER BY  val
  ,            start_date
  ;
  

  Published by: Frank Kulash, 28 January 2010 14:03
  For example, a subquery added.

• To add totals in a certain date range

  I have 3 sheets. Income, expenses and then an annual journal (has twelve columns, one for each month). Is there a way to get the numbers to add totals to a column of the spreadsheet of spending within the date range 01/01/16 and 31/01/16 and put the total in a cell in January on my sheet of each year. I can't understand a formula so that it can find the date range. I get a synyax error message.

  Assumptions:

  Your TABLES (not the leaves) are named income, spending and summary. Here is any other tables in the document with these names.

  Dates of expenditure are in column A of the table expenses. Other than the header line, all the entries in this column are values Date and time that have been entered as dates only.

  The amount for each item of expenditure is in column C of the expense table.

  Line 1 of the analytical table is defined as a header line.

  January is in column A of the summary table.

  Summary::A1 cell contains the date January 1, 2016, but can be formatted to display only the name of the month or the month and year. (but see the note below) *.

  Enter the formula in the cell that will contain total expenditures recorded with dates in January 2016 below:

  = SUMIFS ("Expenses: Expenses, $C: $A," > = "& A1, Expenses: $A," < = "& EOMONTH(A1,0))

  Example: All the amounts of expenditure were reduced to 1.00 simple confirmation of funds.

  * NOTE: The formula has previously worked with the format of the cells in the row 1 Summary defined to show only the month and the year (two digits) of the effective date values (the first day of the month indicated), but the table I built tonight January 1, 2015 to the format to display 16 Jan, one was interpreted as January 16 (2016) , and SUMIFS formula did not include not January 1 to January 14 numbers in January total.

  A custom, displaying the month (short or long) and the year (four digits) or a custom format shows only the name of the month (short or long) gave good results.

  Note that any format under control of the display, the effective date is the first of the month displayed.

  Table built and tested in Numbers ' 09 (v 2.3)

  Kind regards

  Barry

• Conditional formatting depends on the date ranges

  Basically, I want to be able to enter a date in column A and a sum of money in the B column, depending on where the date in column A grave in a date range, I want the money in column B to copy to a corresponding column. Is this possible? The only questions I found on here deal in a conditional formatting with dates have to do with derivative.

  Thank you

  Julio

  I hope this help to clarify for you...

  It is not bringing conditional formatting.  Formatting conditional would change the format of a cell (or cells)... as the font, color, size, color cell background, or other formatting character is tics of a cell based on the contents of the cell

  You ask about including of the value of a cel another beach under certain conditions

  Here is an example:

  

  The first three rows are header lines.

  You must enter a valid date for the towing job.  Using the format "mm/dd/yyyy".

  C4 = IF (AND (DATEVALUE (A4) ≥DATEVALUE($B$1), DATEVALUE (A4) ≤DATEVALUE($B$2)), B4, "")

  It's shorthand dethrone select cell C4, and type (or copy and paste it here) the formula:

  = IF (AND (DATEVALUE (A4) ≥DATEVALUE($B$1), DATEVALUE (A4) ≤DATEVALUE($B$2)), B4, "")

  Select the cell C4, copy

  Select cells C4 at the end of the C column, paste

• Smart album by date range does not select all the pictures, it should.

  I created a Smart Album with a range of the year.

  Some pictures appear in the Smart Album, but others do not, even though their information shows that their date corresponds to the range.

  I tried a repair of the photo library database, but that did not help.

  Try breaking the rule of date range: a buggy behavior reported in some language settings.

  This version shows more photos?

  

• The smart Albums based on the date range cause app Crash Photos

  While I'm setting up a new Smart Album based on day of photos between 12/01/2015 and 31/12/2015 the Photos app closes with a crash. Cannot set the second date (the end date for this album). However, I can easily create a new Smart Album for next month (01/01/2016 and 01/31/2016). I create smart Albums, because the new Photos app does not like the old iPhoto does with my Photos from the photo gallery.

  How can I solve this? I don't have an album of December...? !

  You are in an area where the date format is different from the United States?  Earlier this year, we have seen small business issues have reported that rules for smart albums date range do not work with the primary language set to French or German.

  Try to change the primary system language to English with an English date format. Photos could be trying to read the 12/31/2015 as the 12th day of the month 31.

  Or use a different date based on 'before' rule and after.

  

• PCI-6110 continuous data

  I am trying to take data continuously from 4 channels maximum 5Msamples per second and writes at the same time as the data on the drive using the TDMS writer.   I use daqmx LabVIEW tools to read and write data.  I get failry good flow, but it is not completely continuous.

  1 is it possible in Labview?

  2. is it possible with NIScope?  NIScope is at all related to labview?

  Thank you

  Ben.

  I'm not an expert DAQmx, but it is a fairly common use case covered by the API. You can configure DAQmx so that when the data are collected, it is written as efficiently on the disk. You can do it for a continuous data stream. You can find an example of this here (and more examples using the LabVIEW example Locator: Help-> find examples...):

  \examples\DAQmx\Analog Input\Voltage - Input.vi continues

  This VI uses the data at the level, so you will want to choose not adjusted I16 data for the type of output to the maximum speed.

  Alternatively, you can use a producer/consumer architecture, acquire data in a loop and it continuously to the PDM in another. It is essentially this as the example above, but much easier and more quickly, because it involves fewer copies of data.

  Good luck!

• Excerpts from continuous data acquisition

  Hello

  I want to make an acquisition of continuous data with a NEITHER-6133 @ 1ms per channel. The data must be stored on hard disk. At the same time, I want to take excerpts from acquisition to calculate different values. The acquisition of the extract must be triggert by an external digital trigger.  Are there examples, which combine continuous data collection and collection excerpts?

  Thank you very much.

  Best regards

  Michael

  System

  Windows 7

  LabVIEW 2012

  NOR-6133

  Thanks to the support of NOR-Germany, I found a solution for me:

  1.) continuous trigger switch

  Connect 2) the trigger for the signal to a digital i/o

  3.) synchronize AI and DIO

  Excerpt 4.) the samples needed by the search within the digital waveform pattern

  Result:

  The example shows 4 IA channels Cup (tested on Win7, NI PCI-6115, 4 channels each 5. MECH / s) and calculation on extracts from each channel signal triggered parts.

  

• I32 flipping index iteration continuous data acquisition

  I'm doing some continuous data streaming with Labview FPGA and periodically generate a trigger signal

  the timestamp after a number fixed iterations.

  The strategy I would try was to review the iteration index in the timed loop and whenever he tipped a fixed number I would generate a trigger of the FPGA.

  I tried to find out what happens when you get to 0x7FFFFFFF samples on the register of I32 and apparently

  the index does not roll... It just remains to count max once reached it.

  Is there a way to derail the index on a timed loop? Otherwise I wil just add another

  U32 variable and increment it each cycle and let it roll on.

  the iteration count does not roll.  Therefore at this historic moment, but just use a registry node, local or feedback shift instead.

• Date range of family security

  Yesterday morning, I was able to select the day I wanted to see, but I checked and noticed an updated with no date range in the afternoon.  I want to keep track of that which is seen day after day, not a week.  Help?

  Hello

  Thanks for posting your query on the Microsoft Community.

  We understand that you want to track Web activity report in parental control
  on a daily basis. However, currently, the family safety activity reports Web can
  show only on a weekly basis.

  If you think that the display of the activity report on the Web on a daily basis is a great
  to have the option, you can submit Microsoft using the link below.
  https://Windows.uservoice.com/forums/265757-Windows-feature-suggestions

  Thank you.

• How say continuous data 2D?

  Hi, I have problem with my block diagram. I plan to display data (from temperature probe NICrNi) of several channels and memorizing the data in csv and tiara permanently file. Now the problem is how to say continuous data 2D (double data types)? because the result of the measurement are very unstable... I try using the function means PtByPt VI but she need to double entry of data types... Are so there is another way to describe the data? for example I need an average of data for every 20 samples.

  
  

• HOW CAN I SORT MICROSOFT MONEY BY A DATE RANGE?

  I have Microsoft Money 2007 on my computer and I am trying to sort all of my information by date range. Janrary 2009 - January 2010, how do I do that?

  Hello

  Please repost in the silver forum

  Use this forum to discuss Microsoft Money. This includes money, more and more older versions.

  http://social.Microsoft.com/forums/en/money/threads

• How to increase the available on report date range

  Hi gurus,

  On the BigBrother report page, we can define the date range considered. The date start and end on our BigBrother cannot be defined until 2010 (see this screen below). How can I report for 2012 and beyond?

  Any help will be very appreciated!

  Michael

  

  Micheal,

  Here's how I did it.

  I have the latest version for free.

  Modify the [BBHOME]/www/help/bb-rep.html file

  Line 95:

  2011

  2012

  2013

  2014

  2015

  2016

  And also to line 153:

  2011

  2012

  2013

  2014

  2015

  2016

  I hope this helps!