inside the cod

Similar Questions

• Erases a file within the cod

  Hi all

  I'm file seal inside the cod when creating the application. So it's possible I can remove/delete this cod file?

  Thank you

  nothingness

  If its not very big and you don't want to have downloaded you separately, you can package it in a separate COD which is installed at the same time... then remove/uninstall this COD after using what to use it. Don't know what it takes, this isn't really a normal thing to do, but its option.

• The code inside the mc

  Hey guys,.

  I have this code inside a Mc called 'classes '.

  var myMenuArray = [headquarters, barracks, tank, anti-tank, artilleryantiair, airfield, prototype];

  for each {(var btn in myMenuArray)

  btn.addEventListener (MouseEvent.CLICK, onBtnClick);

  }

  function onBtnClick (event: MouseEvent): void {}

  var classVar:String = countryVar + "/" + event.target.name;

  trace (classVar);

  I want to take this outside the Mc code, what should I change?

  Thanks in advance.

  Tim

  Just objects via the movieclip containing their target, the rest of the code remains as it is... two approaches...

  with {(classes)
  var myMenuArray = [headquarters, barracks, tank, anti-tank, artilleryantiair, airfield, prototype];

  }

  OR

  var myMenuArray = [classes.headquarters, classes.barracks, classes.tank,...];

  I don't know if you will have problems using 'prototype' as the instance name.

  Edit: Another thing you can do is to use 'currentTarget' instead of 'target '.  It is possible that objects within these buttons can end up being the target, but the currentTarget will always be the object that has the assigned listener

• How to PROGRAM a button symbol inside a Clip with the code snipplets

  I have a clip

  Breast of the clip are three button symbols

  I added code snippets to go to a web page and go to a scene

  Neither of the code snippet works on nested button symbols.

  I have to add to the code snippet to create the button symbols work in the film clips?

  You will need to know as soon as POSSIBLE!

  Thank you

  is - this code:

  B2.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage_7);

  function fl_ClickToGoToWebPage_7(event:MouseEvent):void

  {

  navigateToURL (new URLRequest ("http://www.adobe.com"), '_blank');

  }

  on the movieclip (which contains b2) timeline?

  If so, what do you see when you test with the following added tracing instructions and clicking b2:

  trace (B2, this.currentFrame);

  B2.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage_7);

  function fl_ClickToGoToWebPage_7(event:MouseEvent):void

  {

  trace ('clicked', this.currentFrame);

  navigateToURL (new URLRequest ("http://www.adobe.com"), '_blank');

  }

• HTML5 reference code works is not inside the Javascript on DW CS6 function

  Hello

  I'm working on Dreamweaver CS6 and indicators of code does not work as expected when you write Javascript code.

  The minute that I insert a code hinting feature no longer appears the HTML5 elements.

  

  Should I remove the function then him reappears indicators of HTML5.

  

  How can I get the code referring to work when I add in the function?

  Thank you

  Herman

  Thank you for reporting this issue, Herman!

  We have recorded a bug for it and you're tracking internally.

• create the code lock for computer book note

  How to create the code lock for computer book notices

  Enter the BIOS, select the Security tab and set the power on password.

  I strongly recommend that you write the power on password and put somewhere safe. If you have forgotten the password turned on, you will find that you will need to send your laptop to be repaired by HP. This is not free of cost. Once a button inside the laptop password reset are over.

  I can't be more precise, as you have not identified your laptop with its full product name or product number.

• Scripting - reference control Replace inside the flat sequence

  Hello

  Just in the process of upgrading our software from 8.6 to 2011. A question that we have is references appear to be different to the old code. Example - if we create a new control reference, put it next to the old one, put a probe on the two, references do not match when we run the vi.

  This causes havoc with our very large amounts of code. We contacted OR that our support subscription and they required an example which we can really give.

  In any case...

  I thought that I would write a vi script to replace all old references of our code with new references.

  Problem is that I can't replace a control easily reference which is inside any kind of structure.

  I need a way to get a reference to a parent structure, I can then add to the structure.

  This will take place on large amounts of complex code, so there need to be versatile. Please see the attached Vi

  Thank you

  Joe

  I would like to make the following changes:

  

  • You'll want to use the 'Move' method, which allows you to specify an owner.  In this case, the owner is the schema that belongs to the original control reference.
  
  
  • You want to get the original order wire and get all its wells (i.e. not null index into the array of terminals), so that you know what to wire the new benchmark in control of.  That is why the Connect wire method is in a loop For... the original control reference may have wired to several objects.

  Let me know if you have any other questions.  As far as I know, all properties/methods that I am using the code above are available in LabVIEW 8.6.

• Subvi inside the structure of event wont run a second time.

  I have a Subvi within a structure of the event, and it runs when I press a button, inside the Subvi is code in a while loop, and when the last piece of code is executed, the while loop stops.  I have a bad event triggerring once I have already run once.  Which means that I pressed the button and the code in the event structure was executed and while the main VI works always, I press the same button again and everything works but the Subvi.  How I would do this job?

  
  

• Correspondence is not detect "------" (backslash when the backslash is given inside the brackets)

  Model matching VI does not detect "------"(back slash) when I give back slash inside the brackets, I enclose the code example I made, in this VI all the symbols in brackets except the backslash are detected. "." Anyone know what the problem is with the program. ???

  Hello

  Use a double slash [<,\\,>] inside the brackets. It will be detected.

  Kind regards

  Amine31

  (Bravo to give good answers, mark it as a solution if your problem is resolved)

• Is a global functional with loops inside the structure of cases subject to the race condition?

  Like this one:

  

  Global variables funtional implement Mutual Exclusion for their confined i.e. code section of the code in the FGV cannot run once at the time by all processes with competing concurrent access. With this in mind, all the code inside will be executed while one task has access, then released once the FGV has completed the operation. The structures listed as your curls and case Structures are not in themselves share resources, so there is no problem with conditions of competition in this area.

  You would only if worry if the functional Global Variable wrote to other resources shared in a way that is not properly synchronized.

• How to simplify the code to generate custom error codes and messages

  I designed a vi that generates the error when any data entry is missing, it works correctly, but the problem is that I want to simplify, because it is part of the main program and its block diagram is great to use as such (I tried to use this vi as a Subvi in the main program, but that does not work correctly) so I need help to simplify the code or if there is no other better medium to generate the error message.

  Hello

  As shown in the previous example, to a different question of yours, it is always good to reduce with diagrams of huge block with repeated code.

  When you overwrite functionality even repeated several times, put it in a loop and run it to have recurrences of 4 or 5 of the same code.

  It will be evolving in the future.

  joined the vi changed for you.

  Note: when you want to simplify your program, isolate your code in functions, put each function inside a under vi.

  in your case, you can have the control to an empty string for all channels within a Subvi. build an array of strings and go through the subvi. Control in the sub that VI is that strings are empty.

  an array of Boolean output error. build your error string in another under vi. the wires together.

• Node inside the loop - out of memory

  Hello world

  I have a Mathscript node inside a Subvi is called inside a loop for. After a few iterations of the loop, I run out of memory. That's why I added another node in Mathcript with the function 'clear' outside the Subvi, hoping that after I get the variables from the node I could erase the memory of the Mathscript, but this does not work, it is always short of memory.  Is anyone know how can you delete variable memory Mathscript node, once they were saved in the variables in Labview? Thanks in advance.

  

  You don't even really any useful information to solve the problem. As I exaplained, constantly deleting data sets just to reassign them to the next iteration is generally ill advised, because it causes just more performance and same memory fragmentation issues. It is best to operate locally as much as possible.

  Who wrote the code matlab? Maybe it's very inefficient? What is doing? Perhaps rewrite in LabVIEW you gain significant performance.

• Cannot use Select inside the loop For inside the SCTL (FPGA) - Bug? An alternative?

  When I put a Select statement inside a loop in a loop of Timed Cycle in LabVIEW FPGA, I get the following error when I try to compile:

  "An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:

  Error-61003 occurred at

  Possible reasons:

  LabVIEW FPGA: you cannot include this function in a loop For when the loop is within a single cycle timed loop. »

  I didn't know that whatever it is documented that says that this is not allowed; is this a bug or am I missing some documents?

  The code that causes this error looks like this, inside a SCTL (ignore Boolean wire wandering behind the loop for)

  

  I came up with the code below instead, which compiles into one Cycle timed loop, but it is a bit ugly. Does anyone have a better suggestion?

  

  This issue is currently followed under the CAR # 592391. Please keep an eye on our patches and new versions as usual!

• My email account has been hacked. I get the code to reset the password, but when I enter my old password, it does not work.

  My account has been hacked: (, I got the code to reset the password because the account is locked and when I enter my old password is incorrect tells me there is no way to go, someone knows what can be fixed the problem)

  original title: my account has been hacked :(

  Hello

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• How calculated the code coverage in unit test infrastructure

  I'm looking for documentation on how the unit test framework calculates code coverage.

  I just recently installed the unit test framework and I had mixed results with the code coverage feature.  I manually calculated all the branch points in my vi, but the framework calculates more that I can think of, which gives a value of code coverage less than stellar (51%).  Is there documentation for how it is calculated?  I'm either missing something fundamental, or there is a bug with the framework.

  My vi consists of a loop (with shift registers) uninitialized which runs once.  On the inside of the loop is a business T/F structure that leads to a listed case structure possible two cases (one of which is the default value)... pretty basic.  Inside one of the structures is a loop and the other is cross.  For some reason, the unit test framework calculates 7 "flags chart run.  I use the method of "external" test harness to call all my test cases for the vi under test, b/c frankly it was easier to use than the UI provided.  I don't know if this is the cause, b/c I saw the other oddities when using it, which I'll save for another thread of discussion.

  Code coverage is calculated by dividing the number of diagrams, code that was executed by the number of diagrams in your VI altogether. Each VI has at least 1 schema (schema-block real). Loops have a single diagram each, case structures and sequences have a single diagram by image and so forth (=> from your description, your VI has at least 7 diagrams). You can double-click the patterns that were not executed in the Unit Test Framework results dialog box to be displayed.

  This approach does not reflect the amount or complexity of the code that contains each diagram. We looked at various ways of counting nodes, terminals, controls, son and other, that would give you a number that reflects your code with more precision. Unfortunately, neither of these approaches gives values that can easily be understood without some knowledge about the inner workings of LabVIEW. We chose to go with a solution that is completely transparent to end users.

  Thank you

  Herbert