Contribute Publishing Services and Windows Server 2008

Similar Questions

• Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2 now not authentic

  Separated from this thread.

  Joachim

  When first pose the problem? Was it before or after the December updates?

  KB3004394 and KB3024777 appear in view update history? Or do they appear in installed updates?

  Gerry, thanks for your post. I have the same problem as Joachim started this thread. I am running Windows 7 sp1. I have a Dell computer and it's certainly a legitimate copy of Windows (confirmed computer 'properties' and it is enabled).

  By your post, I saw just to update and the KB3004394 (installed on 12/10/2014) and KB3024777 (installed on 12/12/2014) show as comfortable. I usually leave the Windows download updates automatically and I install them to stop. I watched the second update and according to Microsoft.com:

  Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2

  The KB 3004394 update which was dated December 10, 2014 can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer.

  My problem is, as of today 14/12/2014, I still get the pop up "this computer is running not windows genuine', even with KB3024777 installed.

  Any thoughts?

  Thank you

  Bob C

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Then type: slmgr.vbs - ato (this will force the activation)

  Leave the command prompt

  Restart your computer

• AX4 and Windows server 2008 for 3 TB only one Partition

  We need two partitions of 3TO. AX4 and Windows Server 2008 allow that?

  This driver GPT runs stable with partition of size more than 2 TB?

  Virtual disk AX4 may be greater than 2 TB?

  Thank you

  
  

• PowerEdge 2600 and Windows Server 2008 R2 installation problem

  Hello.

  I have a Dell PowerEdge 2600 server. Here is the configuration:

  BIOS version: A14

  2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)

  4 x 1 GB of RAM

  2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1

  6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration

  Firmware for the PERC 4/Di 2.52D

  It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.

  Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.

  I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?

  I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.

  Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.

  Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.

  Thanks in advance.

  The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:

  • The 2600's chipset does not support ALL 64-bit processors
    http://Ark.Intel.com/products/27741/Intel-E7501-memory-controller
  • No. 6 systems are supported on 64-bit OS - not all listed here, but the 6600 lists NO 64-bit OS (8 G was the first):
    http://advisors.Dell.com/AgileWeb/iDrivematrixView.aspx
  • 2003 x 64 is not no more, which would be if 64 bits have been supported all the

  You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.

  "2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."

  16-bit applications are not supported in 64-bit operating systems:
  http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx

• Difficult communication between Windows Server 2008 R2 and Windows Server 2008 R2

  I have a client-server application. The application server is installed (Jboss 4.2) on a computer that uses Windows 2003. The Jboss does not have Local system, but a user who has administrator rights. Among other features, this application communicates with other servers that use Windows Server 2008 R2, to find all the services of Jboss that are installed on these machines, their status, the databases that are connected to them, the ports (by checking the file jboss - service.xml, oracle - ds.xml). This communication is done by sending orders sc, as (and other controls to start and stop services):

  Status of request \\server SC = all | find/i 'jboss ' | find/i 'service_name ' | find/i "_q".

  My problem is that I have to migrate this application from Windows 2003 to Windows 2008 R2.  After I installed it on my new machine, I saw that the application is not behavies as it should. I managed to observe that the response time to send the same command (the one above) to Windows 2008 R2 to Windows 2008 R2 takes more time that sending the same command from Windows 2003 to Windows 2008 R2.

  Is something changed in the sc command or there's a problem with the security rights?

  If you have an idea, please give me a feedback.  This problem is beyond my knowledge.

  You can find server gurus in the following forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  This forum deals with domestic users of questions, so using Server forums you will get a much better response.

• T61 and windows server 2008

  I get to level my t61 of xp to windows server 2008. Yet, the bluetooth does not work. the pilot said he could not find bluetooth device. Secondly the fn keyboard shortcut does not work either. FN + f4 is ok, the fn + pgup/dwn is ok, but not fn + f2, f3, f5. any thoughts?

  Thank you.

  Most of these function keys is related to a specific program (Fn + F3 to change plans with power management program)

  If the associated program is not installed you have no functionality.

  more information can be found here.

  To solve the problem or the other vist hereto manually download drivers and software

  Or

  Click hereto use the system update drivers and software download and instlal for you

  PS bluetooth radio must be powered first before they recognozed by windows. Having been current on windows will install the default microsoft drivers. FN + F5 function is used to do this. Hotkey driver/utility must be installed to use Fn + F5.

• How do I dual boot windows 7 a physical drive and windows server 2008 R2 to a second drive

  I bought a new 'high-end' and want to leave the current WIndows 7 Home Premium (64 bit), as is.  I want to install a second drive hard and on this new drive, install WIndows Server 2008 R2 so that I can run hyper-v.  I know I have to edit the BCDEDIT, but EVERYWHERE I look for help on this subject, he refers to a virtual hard disk... I don't want to run Server 2008 from a virtual hard disk... but rather a native installation.  Is this possible... If yes HOW?  I know he's probably changed since the days of WIndows 2000 and WIndows 2003.

  Hello
   
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

   
  I hope this helps.

• The service of Windows Server 2008 SP2 user profile fails to load my profile

  the user profile service failed to load my profile in windows server 2008 sp2 Enterprise

  Here is the Vista Forums.

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  They will help you in the 2008 Server Forums at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• 11 GR 1 material OBIEE and Windows Server 2008

  Hello
  I tried to decipher certification matrices but came short and thought I would ask here.
  OBIEE 11 GR 1 material is certified to run on Windows Server 2008 64-bit? That is to say if it will support Oracle?
  
  
  See you soon,.
  J
  
  
  Easy points: P

  Hi kremer,.

  OBIEE 11 GR 1 material is certified to run on Windows Server 2008 64-bit? That is to say if it will support Oracle?

  OBIEE 11 g is supported on Windows server 2008 64-bit, but component RCU is only supported on 32-bit windows and 32-bit should be downloaded from the oracle site.

  (2) IE 7 supports only with OBIEE 11 g, the suggestion is go with MOZILLA 3 or higher.

  This has answered your question.

  See you soon,.
  KK

• The update wants to do a net framework 1.1 SP1 on Windows XP, Vista and windows server 2008 x 86. KB2656353 but can not. Why not?

  The update wants to do a net framework 1.1 sp1 on Windows xp, vista and windows swrver 2008 x 86 (KB2656353), but can not.  Why not?  He simply has it again and again without updating.

  I finally got by a 'person' and he took over the computer.  It took almost 2 hours, but he finally managed to fix the problem and get the update installed.  Hooray!

• CSA and Windows Server 2008 crashes

  We have a problem where we install CSA 6.0.2.130 on a Windows 2008 server running IIS and the server hangs after login.  Screen turns off, the mouse pointer is there but the system does not respond.  It is possible to start the Task Manager, and it shows almost all services stopped (but the CSA running).  Stop the CSA service returns the function on the server.  However, once all services have started, if we try to start the CSA, the server hangs and then again.

  Research in newspapers CSA files does not show something important.  There are a few references to the center of management not being is not accessible, but they resolve.

  Any ideas where to look?  We have tried to turn off A / V, resettlement, etc..

  This looks potentially like bug CSCtg98849.  There is a solution that should allow you to continue to work with the CSA helped:

  Edit the "Base - Digital Signing of Downloaded Executables" rule module and disable the file access control "Send downloaded executables for scanning if opened for read". Save the change. Generate rules and deploy to affected hosts. 

  [Wrap text] [Edit this forum] 
  Support Note: modified on 02/06/2010 07:41:44 by scfringe
  [Unwrap text] [Edit this forum] 
  Support Note: modified on 02/06/2010 07:41:44 by scfringe

  Scott

• I'm unable to start the service for the name of the account to Network Service on Windows Server 2008.

  Original title: name of the account network Service can be resolved correctly on windows French

  I have a service, I want to run under the network service on windows French account. Computer is not in the field, but in the working group.

  Service is installed via install and uses the WinAPI functions to get the name of a valid account of localized, which is the AUTHORITY NT\SERVICE NETWORK.

  The problem is that service fails with errors in the following event viewer:

  (1) service depends on the Net Logon service which failed to start because of the following error:
  The operation was successful.

  (2) this computer is configured as a member of a workgroup, and not as a member of a domain. It is not necessary to perform the service access network in this configuration.

  However, if I go to the properties of this Service, Log On tab and button Browse... to address the NETWORK SERVICE account, it sticks "Network Service" value in field and function successfully starts. Note that it may not resolve the display name 'AUTHORITY NT\SERVICE NETWORK'.

  Another thing is that when I put the computer in the domain that manages all the service suddenly starting with 'AUTHORITY NT\SERVICE NETWORK' account but the system does not transform it in "Network Service" on English windows.

  So is this a bug on a French OS? Is there a solution? How can I get programmatically "converted" version of the account name ('AUTHORITY NT\SERVICE NETWORK'-> 'Network Service')?

  System: Windows 2008 R2 SP1 with the latest updates to the 01/10/2013

  Hi Vadim,

  I would have you post your query in the TechNet Forums because it caters to an audience of it professionals.

  Your question would be more out there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Back to us for any issues related to Windows in the future. We will be happy to help you.

  Thank you.

• Windows 7 and Window Server 2008 license

  I got Dell workstations with WIndows 7 and Windows 2003 OS. I want to know if these licenses are related to hardware, which in the case where all my workstation fails and replace it with the new job, can I use a license for the OS on the new workstation. If this isn't the case, then what can be done to make this current independent license machine.

  Thanks in advance.

  Its the same as the OEM license, it has no transfer of rights once his load on this machine. Windows 7 Embedded is used in solutions of the industry such as kiosks, retail point-of-sale devices to and other types of retail basic scenarios.

• ESX 3.5 and windows server 2008

  It appears, from what I can find this server running 2008 clustered is not yet supported by vmware.  From the update 4 is this always the case?  Also is there still no support for scsi-3 reservations?  Of course, this means I have to use an ISCSI target for win2k8 clustering.

  Hello

  It appears, from what I can find this server running 2008 clustered is not yet supported by vmware.  From the update 4 is this always the case?  Also is there still no support for scsi-3 reservations?  Of course, this means I have to use an ISCSI target for win2k8 clustering.

  There is no support for clustering Win2K8 correct.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• Where can I download the dynamic Cache Service for Windows Server 2008 R2

  I found the helpful http://support.microsoft.com/kb/976618 note and want to d/l the dynamic Cache Service.

  Thank you

  Robert

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads