CSA and Windows Server 2008 crashes

Similar Questions

• AX4 and Windows server 2008 for 3 TB only one Partition

  We need two partitions of 3TO. AX4 and Windows Server 2008 allow that?

  This driver GPT runs stable with partition of size more than 2 TB?

  Virtual disk AX4 may be greater than 2 TB?

  Thank you

  
  

• Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2 now not authentic

  Separated from this thread.

  Joachim

  When first pose the problem? Was it before or after the December updates?

  KB3004394 and KB3024777 appear in view update history? Or do they appear in installed updates?

  Gerry, thanks for your post. I have the same problem as Joachim started this thread. I am running Windows 7 sp1. I have a Dell computer and it's certainly a legitimate copy of Windows (confirmed computer 'properties' and it is enabled).

  By your post, I saw just to update and the KB3004394 (installed on 12/10/2014) and KB3024777 (installed on 12/12/2014) show as comfortable. I usually leave the Windows download updates automatically and I install them to stop. I watched the second update and according to Microsoft.com:

  Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2

  The KB 3004394 update which was dated December 10, 2014 can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer.

  My problem is, as of today 14/12/2014, I still get the pop up "this computer is running not windows genuine', even with KB3024777 installed.

  Any thoughts?

  Thank you

  Bob C

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Then type: slmgr.vbs - ato (this will force the activation)

  Leave the command prompt

  Restart your computer

• PowerEdge 2600 and Windows Server 2008 R2 installation problem

  Hello.

  I have a Dell PowerEdge 2600 server. Here is the configuration:

  BIOS version: A14

  2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)

  4 x 1 GB of RAM

  2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1

  6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration

  Firmware for the PERC 4/Di 2.52D

  It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.

  Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.

  I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?

  I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.

  Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.

  Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.

  Thanks in advance.

  The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:

  • The 2600's chipset does not support ALL 64-bit processors
    http://Ark.Intel.com/products/27741/Intel-E7501-memory-controller
  • No. 6 systems are supported on 64-bit OS - not all listed here, but the 6600 lists NO 64-bit OS (8 G was the first):
    http://advisors.Dell.com/AgileWeb/iDrivematrixView.aspx
  • 2003 x 64 is not no more, which would be if 64 bits have been supported all the

  You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.

  "2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."

  16-bit applications are not supported in 64-bit operating systems:
  http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx

• T61 and windows server 2008

  I get to level my t61 of xp to windows server 2008. Yet, the bluetooth does not work. the pilot said he could not find bluetooth device. Secondly the fn keyboard shortcut does not work either. FN + f4 is ok, the fn + pgup/dwn is ok, but not fn + f2, f3, f5. any thoughts?

  Thank you.

  Most of these function keys is related to a specific program (Fn + F3 to change plans with power management program)

  If the associated program is not installed you have no functionality.

  more information can be found here.

  To solve the problem or the other vist hereto manually download drivers and software

  Or

  Click hereto use the system update drivers and software download and instlal for you

  PS bluetooth radio must be powered first before they recognozed by windows. Having been current on windows will install the default microsoft drivers. FN + F5 function is used to do this. Hotkey driver/utility must be installed to use Fn + F5.

• Windows Server 2008 crash - need help to analyze the minidumps

  We have a Windows Server 2008 which crashed 5 times in the last days.

  I placed the file 120313-41636 - 01.zip that contains all 5 landfills in my public skydrive folder to- https://skydrive.live.com/?cid=446280106bb642de#cid=446280106BB642DE&id=446280106BB642DE%21140

  Any help would be appreciated

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Difficult communication between Windows Server 2008 R2 and Windows Server 2008 R2

  I have a client-server application. The application server is installed (Jboss 4.2) on a computer that uses Windows 2003. The Jboss does not have Local system, but a user who has administrator rights. Among other features, this application communicates with other servers that use Windows Server 2008 R2, to find all the services of Jboss that are installed on these machines, their status, the databases that are connected to them, the ports (by checking the file jboss - service.xml, oracle - ds.xml). This communication is done by sending orders sc, as (and other controls to start and stop services):

  Status of request \\server SC = all | find/i 'jboss ' | find/i 'service_name ' | find/i "_q".

  My problem is that I have to migrate this application from Windows 2003 to Windows 2008 R2.  After I installed it on my new machine, I saw that the application is not behavies as it should. I managed to observe that the response time to send the same command (the one above) to Windows 2008 R2 to Windows 2008 R2 takes more time that sending the same command from Windows 2003 to Windows 2008 R2.

  Is something changed in the sc command or there's a problem with the security rights?

  If you have an idea, please give me a feedback.  This problem is beyond my knowledge.

  You can find server gurus in the following forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  This forum deals with domestic users of questions, so using Server forums you will get a much better response.

• How do I dual boot windows 7 a physical drive and windows server 2008 R2 to a second drive

  I bought a new 'high-end' and want to leave the current WIndows 7 Home Premium (64 bit), as is.  I want to install a second drive hard and on this new drive, install WIndows Server 2008 R2 so that I can run hyper-v.  I know I have to edit the BCDEDIT, but EVERYWHERE I look for help on this subject, he refers to a virtual hard disk... I don't want to run Server 2008 from a virtual hard disk... but rather a native installation.  Is this possible... If yes HOW?  I know he's probably changed since the days of WIndows 2000 and WIndows 2003.

  Hello
   
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

   
  I hope this helps.

• 11 GR 1 material OBIEE and Windows Server 2008

  Hello
  I tried to decipher certification matrices but came short and thought I would ask here.
  OBIEE 11 GR 1 material is certified to run on Windows Server 2008 64-bit? That is to say if it will support Oracle?
  
  
  See you soon,.
  J
  
  
  Easy points: P

  Hi kremer,.

  OBIEE 11 GR 1 material is certified to run on Windows Server 2008 64-bit? That is to say if it will support Oracle?

  OBIEE 11 g is supported on Windows server 2008 64-bit, but component RCU is only supported on 32-bit windows and 32-bit should be downloaded from the oracle site.

  (2) IE 7 supports only with OBIEE 11 g, the suggestion is go with MOZILLA 3 or higher.

  This has answered your question.

  See you soon,.
  KK

• The update wants to do a net framework 1.1 SP1 on Windows XP, Vista and windows server 2008 x 86. KB2656353 but can not. Why not?

  The update wants to do a net framework 1.1 sp1 on Windows xp, vista and windows swrver 2008 x 86 (KB2656353), but can not.  Why not?  He simply has it again and again without updating.

  I finally got by a 'person' and he took over the computer.  It took almost 2 hours, but he finally managed to fix the problem and get the update installed.  Hooray!

• Contribute Publishing Services and Windows Server 2008

  Someone was able to install contribute Publishing Services 1.11 on a 32-bit Windows Server 2008?  Any information would be greatly appreciated.

  I was able to get it "installed" by copying a previous installation of Windows Server 2003 to Windows Server 2008. Got a ticket to blog about it here:

  http://onceuponans.blogspot.com/2009/04/installing-contribute-publishing.html

  I think our next rev of the website won't probably use Contribute more. Too bad, really - I rather liked it.

  -Andy

• Windows 7 and Window Server 2008 license

  I got Dell workstations with WIndows 7 and Windows 2003 OS. I want to know if these licenses are related to hardware, which in the case where all my workstation fails and replace it with the new job, can I use a license for the OS on the new workstation. If this isn't the case, then what can be done to make this current independent license machine.

  Thanks in advance.

  Its the same as the OEM license, it has no transfer of rights once his load on this machine. Windows 7 Embedded is used in solutions of the industry such as kiosks, retail point-of-sale devices to and other types of retail basic scenarios.

• ESX 3.5 and windows server 2008

  It appears, from what I can find this server running 2008 clustered is not yet supported by vmware.  From the update 4 is this always the case?  Also is there still no support for scsi-3 reservations?  Of course, this means I have to use an ISCSI target for win2k8 clustering.

  Hello

  It appears, from what I can find this server running 2008 clustered is not yet supported by vmware.  From the update 4 is this always the case?  Also is there still no support for scsi-3 reservations?  Of course, this means I have to use an ISCSI target for win2k8 clustering.

  There is no support for clustering Win2K8 correct.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• My PC will not repair or install an operating system. I tried with Vista, 7 and Windows Server 2008 installation media, but it does not get as much as the first menu.

  As it is said above. Everything worked fine until a few days ago. Now, it will fail to start correctly wih STOP 0 x 00000024 (ntfs corruption), but I can't boot from any installation media to reinstall the OS or repair Vista. All I get is the wallpaper but no menu. I tried to unplug the SATA HDD and inserting an IDE drive with no effect.

  I can't start to BACK among the several start-up/repair CD I tried but I am unable to boot from a DVD of Windows XP PE (BartPE or Hiren boot CD), but I can boot Knoppix Linux (5.3.1 and 6.4.3).

  All I want to do is run chkdsk /r and then either to repair or install a new OS to make it work again.

  Any thoughts?

  Dave

  Hi Dave,.

  You can read the following article which talks about the same issue:

  Error message in Windows 2000: "Stop 0 x 24 ' or «NTFS_FILE_SYSTEM»

  Note: The steps mentioned in the article apply to Windows Vista n 7, so operating systems.

  1. do you have the original supplied with the computer disks?

  2 have you tried to use the original Vista disks?

• Windows Server 2008 R2 VM crashes

  Hi vPros;

  I have a problem running Windows Server 2008 R2 af on a host vSphere4. Installation is complete, but some simple reportoire will cause the BONE to hang (at a level of Windows). Such an operation which therefore causes this error, is to navigate a REGEDIT session with the arrow keys: move HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and press the key "d" (e.g. to FF to the reg.key DISC) - the operating system crashes.

  The test has been done with W2K8_R2 RTM and RC, various controllers vSCSI and vNIC and both the 'Windows Server 2008 64-bit"and"Windows Server 2008 R2 64-bit (experimental)"- all with the same result?

  The vSphere host is a HP DL380G5 Intel Xeon X 5460, patched to the latest level.

  Has anyone seen the same thing or found a solution?

  Prior to thank you

  Thomas

  Using Remote Console when this happens? If you do, no chance that the bug is the same as in this thread? http://communities.VMware.com/thread/218244?start=0&TSTART=0

  / Rubeck