control - jboss DO NOT start stop button

Similar Questions

• Satellite L850: Catalyst Control Center does not start

  Hello, I have an AMD 7670 m dedicated graphics card and when I install the AMD display drivers downloaded from the toshiba site, the Catalyst control does not start and he also seem to have problems with the usb ports and my wireless stops working for some reason any.

  Is that what I can do on it or am that I better use the downloaded drivers directly from AMD? Thank you

  Maybe stupid question now, but why do you need it? Have you been preinstalled OS with your laptop or you bought for laptop computer without an operating system preinstalled?

  What model do you have exactly (L850-xxx)?

• TOSHIBA HWSetup in Control Panel does not start

  All the updates of Bios, drivers, WindowsXP SP2 is installed. The utility called "TOSHIBA HWSetup" does not start from the control panel. Could use some help here because I like to adjust some more advanced settings of my laptop.
  PS: How can I access the Bios settings?

  Hello

  I put t know which model of laptop you have, but in my opinion, you should try to remove this utility and install it again. You can download it from the download from Toshiba site.

  Try to enter the BIOS settings using the ESC key at the beginning upward.

  Good bye

• HP Envy J049TX: Beats Audio Control Panel is not start/work

  My Beats Audio Control Panel does not work. When I Open Beats Audio, a dialog box appears indicating that

  "IDT Audio from PC has stopped working"

  I have recently upgraded to Windows 8.1 and the only problem I found was that the Beats Audio Control Panel does not work.

  I also tried to uninstall drivers and reinstall it from the hp website, find my model number and appropriate IDT Audio driver software, but this does not work too.
  Already when I got windows 8, beats audio has worked, but as soon as I upgraded to this 8.1, this error.

  Hi @MegaArm ,

  Welcome to the HP Forums!

  This is a fantastic place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your audio Beats worked very well until you upgraded to 8.1 Windows now, you get a dialog box indicating the "'IDT Audio of PC has stopped working". "

  You have tried to uninstall and reinstall the driver now prevail.

  If you go to Device Manager, what is the error on the audio device?

  Have you impossible to uninstall the driver or unable to reinstall the driver on the HP website.

  If you access the Device Manager can you right click on the audio and update the driver from here or do a driver roll back.

  Then, I'll try to do a HP PC - refresh your PC to solve problems (Windows 8) .

  The question must always be, if a recovery to factory.

  HP computers - performing a recovery of HP (Windows 8) system

  During recovery, you will receive an option to backup your personal files to avoid data loss. If you have not already done one, I suggest do you it now.

  HP computers - restore files that have been supported to the top using HP Recovery Manager (Windows 8)

  Once you have completed this process do all your Windows updates.

  Now run the HP Support Assistant to acquire the HP updates.

  Here is a link to the Computers HP - update of Windows 8 to 8.1 as a guide to redo the Windows 8.1 update.

  Good luck!

• Windows XP does not start - stop error__ registry

  Stop: c0000218 {Registry file failure}
  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SOFTWARE

  -Need to recover my personal files and get windows booted up
  -None of the menus f8 startup help including the last functional Setup
  -The hardware is recognized and works fine

  How to recover a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  See also

  How to Troubleshoot Registry Corruption issues
  http://support.Microsoft.com/kb/822705

  How to fix a missing or corrupt Windows\System32\Config\System file
  http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htm

  TaurArian [MVP] 2005-2010 - Update Services

• Brother printer control center does not start in windows 8

  I just installed the software for my brother printers (MfC 885CW and MFC6490CW which as I understand it the Upgrade Advisor was compatible and should simply be reinstalled after the upgrade to Windows 8 pro does not work. The installation of the system software, but the brother control center will not appear on the screen so I run the scan.  I was on the site of the brother and two printers that report on integrated to windows printer drivers 8, but there is no mention of the software does not.  I tried compatibility mode, but in vain.  I'm starting to find that there are problems with Windows 8 when it comes to software which, even in compatibility mode is not working properly work perfectly under windows 7.

  Not for Windows 8, which is the point of all of this thread. (19/05/2013) he very specifically said currently the site Web from Brother Control Center, PaperPort, FaceFilter, etc. are not taken in charge for Windows 8.

• Some features in the Control Panel does not start

  Original title: some feauters on Control Panel do not open

  my computer laptop OS is windows 8

  When I open my control panel functions are not open

  options, troubleshooting, customization of power

  Pleas give me a few tips, how can I do to fix

  Hello Kiran,

  Welcome to the Microsoft Community Forum.

  According to the description, I understand that some features don't not throw in Control Panel. I'll be happy to help you with your query. However, let me ask you a few questions to better understand the issue and assist you accordingly.

  1. What happens when you try to start the service, as said above?
  2. You receive an error message? If Yes, what is the exact and complete error message?
  3. You did any hardware/software specific change in the computer before the show?
  4. You use any third-party antivirus installed on your computer program?

  The issue may have been caused due to conflicts between third-party software. Try these steps and see if they help.

  Step 1: Start in safe mode

  With the parameters of Windows startup screen (formerly advanced startup options), you can start Windows in different advanced troubleshooting modes, so you can find and fix problems on your PC. In previous versions of Windows, you might get to the screen by pressing F8 before Windows starts. Windows 8 PCs starts quickly, so there is no enough time to press F8.

  See the article: Start settings for Windows (including safe mode)

  Step 2: Perform the clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  See the link to perform the clean boot.

  How to perform a clean boot in Windows

  N OTE: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  From now on, try the steps above and check that if these functions of launch and let us know the result so that the answers to the questions, we will be happy to help you further.

  Thank you.

• Start/stop button doesn't work is not on Windows 7-HELP - GOING CRAZY!

  Please help if you can. I'm going crazy trying to solve this problem.

  Recently, I made some recommended system updates. Part of the update requires that you restart the computer after the updates. My laptop will not allow absolutely not me to put back in operation or stop my system... only put into hibernation.

  I have done research on corrections and tried several unsuccessful. My last hope was to run the "clean boot" for windows 7, I did, but in the end when it should have restarted I got an error box that says "the System Configuration cannot restart the computer.

  What can I do? I think that my system does not work properly because it has not been restarted because all updates have been loaded. Is there a solution?

  Thanks in advance!

  Hi Kristi,

  Have you tried to do a hard shutdown and restart the computer?

  If you have not done a hard reboot by manually turning off the power button on CPU, I suggest you to try and see if the problem still occurs.

  If you still experience the problem, then follow these methods:

  Method 1:

  Check out the link and run the Troubleshooter:

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2:

  If the problem is not resolved, I suggest you refer to the article and change what happens when you press the power button on your computer:

  http://Windows.Microsoft.com/en-in/Windows7/change-what-happens-when-you-press-the-power-button-on-your-computer

  Let us know the results.

• My Lexmark X 5270 printer does not respond. ' start/stop' button flashes constantly

  message reads "printer offline".  I tried everything I know to correct the problem.  Any help would be greatly appreciated.

  Hi PhyllisGrebson,

  ·         What operating system is installed on your computer?

  Follow the suggestions below for a possible solution:

  Method 1: If your computer has problems printing, try using the printer Troubleshooter to solve the problem. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

   

  Method 2: Updated drivers

  Make sure you have the latest printer drivers installed on your computer.

  Download and install the latest Windows drivers from the link mentioned below according to your operating system:

  Lexmark X 5270

  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_X5270&page=product&FromPage=null#1

   

  Note: Select the appropriate version (32-bit/64-bit) of Windows and go to the download page.

  For more information about the update of drivers, see update drivers: recommended links

   

  Method 3: Restart the print spooler service

  Refer to the section to restart the print spooler service in the following Microsoft article to restart the print spooler service:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Hope this information helps.

• Office of my son came down with this error code today and does not start: stop: 0x000000a3 (0 x 00000002, 0 00090180, 0x80cd14a8, 0x80c78660)

  I'm not the most tech savy, but with a few tips, I hope to solve this problem.  Thank you.  Is Windows Vista.

  Hello

  It is a serious error and you should seek the help of a real computer (not the leeks and pics store
  at a Best Buy or other department stores) or support of the manufacturer of the system (motherboard manufacturer for)
  custom systems of buildings).

  ==============================================================

  BCCode: A3 0x000000A3

  You "might" be able to update or reinstall the BIOS of the system (motherboard manufacturer) machine
  with the methods they can provide.

  Bug ACPI_DRIVER_INTERNAL control has a value of 0x000000A3. This bug check indicates that the ACPI driver has detected an internal inconsistency.

  Bug Check 0xA3: ACPI_DRIVER_INTERNAL

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computerconnect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft articlesolution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  An inconsistency in the ACPI driver is so serious that continues to run a serious.

  A possible source of this problem is an error in the BIOS.

  BCCode: A3 0x000000A3<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/ACPI-driver-internal-0x000000A3-* 1171.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• x 230 sometimes does not start - stops at the screen Intel Boot Agent

  Hi all

  We use x 230 with Win7 ultimate and domainintegration in our business environment. Some devices have problems at startup. Sometimes they stop booting on the Intel Boot Agent screen. When you restart the computer, it is impossible to enter the BIOS Setup too. You are able to press F1 and later, you can type the BIOS password (if you use one) but then it stops again at the same point, as shown above and shows no BIOS.

  Then, several reboots later (more than 5 I would say) it suddenly works fine again for a few rounds of start and stop. And you suddenly have the same problem again without having changed anything seriously.

  BIOS version is updated to the last that I could find on the pages of lenovo. (2.51 Rev.01)

  It is impossible to give a device with such a mistake to beat in the hands of users.

  You have any ideas?

  Thank you

  Martin

  
  

• JRockit Mission Control Console does not start in windows

  Hi all
  
  I installed JRockit JVM with mission control on my local computer. I can boot the console command mission for a few days. But from today, when I open the mission control, mission control starts flashing and the console cannot be started.
  
  Can I still use the jrcmd to play with the JAVA virtual machine.
  
  I don't know what changes in my console in mission control made computer local collapses of work.
  
  Someone has an idea?
  
  Thank you very much
  
  Jay

  It's strange. What version of JRMC do you have? OPERATING SYSTEM?

  Could you try to start up like this (from your JROCKIT_HOME\bin\ directory)

  JRMC.exe - consoleLog 2 > & 1 | more

  If you receive error messages, please paste here.

  Thank you

  Erik

• HA and auto start / stop

  for the virtual machines that are part of the HA cluster is still not possible to control the parameters of start/stop automatic start and delay?

  any plans for it in vsphere 6?

  Since the Center of Documentation of vSphere

  If the failure of a host and its virtual machines need to be restarted, you can control the order in which this is done with the restart VM priority setting. You can also configure how vSphere HA responds if hosts and how vSphere HA responds so guests lose connectivity network management with other hosts using the host isolation response parameter.

  These settings apply to all the virtual machines in the cluster in the event of a host failure or isolation. You can also configure exceptions for specific virtual machines. See individual vSphere HA to customize the behavior of a Virtual Machine.

  VM Restart priority

  VM restart priority determines the relative order in which virtual machines are placed on new hosts after a failure of the host. These virtual machines are delivered to market, with the highest priority of the VMS attempted first and continuing those who have priority low until all virtual machines are rebooted, or no resources cluster more isn't available. Note that if vSphere HA fails to power on a virtual machine of high priority, he engages to try any lower priority level of virtual machines. For this reason, the priority of restarting VM cannot be used to assert a priority to restart for a multiple application of the virtual machine. In addition, if the number of host failures exceeds what admission control allows, virtual machines with the priority the lower cannot be restarted until that more resources will be available. Virtual machines are restarted on the hosts of failover, if specified.

  The values for this parameter are: off, low, medium (default), and high. If you select off, vSphere HA is disabled for the virtual machine, which means it is not restarted on other ESXi hosts if a host fails. The disabled parameter is ignored by the vSphere HA VM/Application monitoring function, as this function protects virtual machines against failure at the level of the operating system and not the failures of virtual machine. In case of failure at the level of the operating system, the OS is reset by vSphere HA and the virtual machine is running on the same host. You can change this setting for each of the virtual machines.

  ------

  The thing with VM restart the priority that it is currently the order that the boot of VMS is attempted after an HA event. It is not a guarantee that the virtual machines will start in a particular order. It can work well for your environment. I recommend you to test if you can.

  Here's a post from www.yellow-bricks.com about restart priorities and some of the issues in more detail with them:

  I put priorities of reboot but still my VMs seem to be lit in a different order

  And here is a rough idea of what we're looking to future:

  http://www.yellow-bricks.com/2013/09/13/ha-futures-restart-order/

  I hope this helps.

• Stop button does not reset after each program start

  Newbie here, so when I start the program with the arrow of departure or, my Start button is always in the right position, but the stop button is not. How do reset you the default user as the stop button control.

  Lol it doesn't have the same effect.  They are completely different actions.  If they were the same, then NEITHER would never have created the other.  I've never seen a practical use for 'Up to this that freed'.  Read the help files on the mechanical actions to see the difference.  There is a real difference, delicate and subtle.  But there is a difference.

  If you clean the Boolean logic and put the start in case structure button.  It works very well.  See attachment.

• Dell Studio 540MT does not start, green power light on, but the Start button / clear stop completely

  Looking for assistance

  Have a Dell Studio 540MT (purchased in 2009), worked great until 2 weeks ago.   After a temporary system failure would not start.    The power light itself is green fixed.   The power button on the front panel is completely released.

  I read a lot of messages and other information about a similar problem.   Therefore, I did following:

  1. unplug everything, press the power button / stop for 1 minute and retries.   without success

  2. replace the CMOS battery.  without success

  3A jumps the Green and black 20 supply connection wire pins to motherboard.  It started immediately food, fans and hard drive.   so I assumed that the PSU has been authorized.

  4 replace the motherboard with a new mobo.  Curiously, in a first time, there was no change, but after about 2 minutes, the power button was working and power system.   Everything worked so very well.   I had also completely cleaned all the dust in the chassis and radiator, fan and had applied the thermal paster as directed by Artic Silver.   I even turned off after hours of race and restarted system.  Restarted, he noted that it took a couple times by pressing the power button to make it work.   Then the 2nd day I shut down the system by a normal shutdown through Win 7 and let rest for about 10 hours.   When tried to start/turning the power on again, same problem as the original problem... at first, before light power button would show amber flashing when first pressed the power button / stop, then once I unplugged the power cord and let it sit for 1 hour, the light power button showed no light, completely and again no restarts.

  5. I ordered a new power button cord (new)... This could be the problem and replacement will fix?   Is this a known problem that power button can cause this kind of problem?

  6 or is a problem of power supply?   But you wonder why the green light of the PSU and works very well when jumping the Green and black wire on the connector 20 pin?     Before I go buy a new power supply to other suggestions?

  Is there a known issue with button / stop itself and/or PSU on Dell Studio 540 MTs?

  Yes, the front panel can cause failure to start in some models, although I don't specifically remember if the 540 has been affected by this problem. Please let me know if the replacement resolves the problem.

  ATX power supplies should work. Here are the standard components of the Dell desktop computers.