Control NAC WSUS problem

Similar Questions

• Function of memory in the loop control and Simulation - problem of the ODE Solver

  Hello

  I'm correctly using the control loop & simulation to simulate the behavior of what is essentially a shock absorber-spring-mass system. In the process of change in time (dt) is used to integrate an arbitrary value. I use a rack depending on memory to store the time, to calculate the change of time (dt).

  The simulation is quite complex, because of the precision required, not all the ODE solvers can all support. Currently I use the Adams-Moulton method, this works very well for the simulation. However, it cannot detect the change in time, the change is constantly zero. This problem has auto market by using an another ODE Solver, but then the simulation has been messed up instead (even when I listen to the step sizes and tolerances). So I'm pretty confident that Adams-Moulton is one of solver ODE best suited to the problem at hand.

  Is there another way to store the previous hour and use it calculate lag, that the use of the memory function? Everyone knows about these problems before?

  I did a lot of research of error using the probe, but I'm sure that there is a problem with the ODE Solver and memory function. See the image below, showing basic how is calculated the change in time.

  I'm pretty new to LabVIEW, so if there is something else I missed I would be happy to hear it.

  PS! I set the tolerance minimum step of size/relative and absolute for the Adams-Moulton to simulate the behavior of the system properly.

  Problem solved!

  It turns out that the ODE Solver has struggled because of two "table 2D find" used functions. This was created for the interpolation/extrapolation, which caused a problem constantly and the ODE Solver could not resolve correctly, so the functions of memory doesn't work does not correctly or the other.

  By increasing the table manually, I could use closest method instead, with also good results as interpolation.

• Microsoft ACPI compliant control method battery problem shows "plugged in, not charging." Help, please.

  Dear Sir

  I'm having a strange problem. My laptop (HP DM3) shows "plugged in, not charging". I searched on the net and according to some expert instruction, I took out the battery, plugged, booted my laptop computer and since the Device Manager I uninstalled Microsoft ACPI compliant method control pile driver, then off, UN-pluged, inserted my battery, and then restarted again. My battery has shown that charge but after awhile it automatically installed stack method compatible ACPI Microsoft and my problem was back. Please give me a solution for this problem. I'm having extreme difficulties for her. Your kind response to the question mentioned will be highly appreciated.

  Concerning

  Mohapurush

  Hi Mohapurush,

  Compatible Microsoft ACPI control method battery component supports the Advanced Configuration and Power Interface (ACPI) control method battery, include an interface to control method of code ACPI Machine Language (AML) between the battery and the host computer.

  You can use any type of communication interface supported by ACPI and any type of battery because the battery interface is fully accessible by the AML code control methods.

  Battery monitoring and management are available only on compatible computers ACPI and APM-enabled. Windows can handle the batteries that have a smart battery subsystem interface or interface of battery method of control on ACPI computers. Windows can also monitor several batteries.

  I recommend you contact the manufacturers of the system and check the settings on your computer.

  HP Support Forums: http://h30434.www3.hp.com/

  See the following article for more information.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00821536&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4221619

  Battery method control compatible ACPI Microsoft

  Keep us informed on the status of the issue.

• ATI Catalyst Control Center 8 problem Windows

  Hello, I upgraded my ph Pavilion g series at windows 8. But now when I start it, I get the error message that ATI Catalyst Control center needs to be reinstalled. I tried a bunch of times but he returns (reinstalled, tried updates of the ATI site, nothing helps, he said: my driver is correct)

  And second, when I start it just sometimes gives a gray screen (and then I press the power button for 5 seconds to close). I think it might be related to my problem of graphics card. I'm a patient person, but I'm a little scared because I have a feeling I won't take long for my laptop to fi serious accident I have to keep doing this.

  Someone at - there of collaborative for these 2 problems I have?

  Thank you!

  Delabarre

  Hello

  Welcome to the Microsoft forums.

  You have installed the latest driver after uninstalling the driver?

  I suggest also refer to the suggestion from me from following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/Catalyst-Control-Center-failure/de8882d9-c5f7-4916-A94F-7e52582f351b

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• Connection - remote control - MySQL access problem

  I went through the development and testing of my site and now I'm trying to deploy it.

  I have subscribed to a new host and acquired a new domain. I was able to FTP all the files and the works of basic site. However the dynamic elements using MySQL and WordPress are not properly configured.

  As the first step to fix this, I set up the remote database and the Table (same definition as local testing). I imported data into this table, and sounds good. The only difference I see is that host small database name by adding prefix my id with a '_' and so I had to shorten the name to "famhist' instead of 'familyhistory.

  My problem is when I try to configure the MySQL connection and try to select the database that it produces the following error message:

  What I don't understand is where he would have taken the part ".demon" of that name. Web site I'll hang up a ".demon" in the name, but the new site does not work.

  My new host allows the connection of test remotely.

  I use PS CS5 Windows XP.

  Any help would be appreciated.

  

  baughen wrote:

  Also, could you clarify what 'user name' should be used that I've seen different descriptions and they vary or are not clear. What is the FTP, login to host account account or the database user account?

  And finally, as the database name is different between local and remote, I guess I have to change the room to match the remote control (which my host requires a certain format)?

  When connecting to a database, it is the name of the database user account and password that should be used.

  Because your hosting company determines the name of the database for you, it is much more sensible to use the same database name in your local test environment. In fact, you must also define a local MySQL user account that uses the same credentials as your remote database. Then, the only change you'll need to do in the connection file is changing from your remote server name localhost.

• Tab control + Vi script problem

  Hello

  I have a tab control in my sub vi, which in turn has a secondary (let say sp) now I have an another vi which must be loaded in the secondary of the tab. But I get an error message saying invalid reference vi in insert vi. Opening a vi reference in Panel tab gives this error.

  

  I understand where I was wrong. I close the reference Vi before even that I am trying to load it in high school.

• Photo animation control ring spinning problem

  Hello

  Control of animation frame ring does not turn to me as expexted.
  In my main function after having posted the sign
  AnimateCtrl_ConvertFromPictRing (Panel, PNL_SPLASH_ANIMATION);
  AnimateCtrl_SetAttribute (Panel, PNL_SPLASH_ANIMATION,
  ATTR_ANIMATE_ENABLED, 1);
  AnimateCtrl_SetAttribute (Panel, PNL_SPLASH_ANIMATION,
  ATTR_ANIMATE_FRAME_INTERVAL, 0.05);
  AnimateCtrl_SetAttribute (Panel, PNL_SPLASH_ANIMATION, ATTR_ANIMATE_STOP_ON_LAST_FRAME, 0);

  ProcessSystemEvents();

  Line of ProcessSystemEvents() it gives a runtime error

  NO MORTALS RUN - TIME ERROR: "test.c", line 137, col 5, thread id 0x00000C38: library function error (return value ==-4 [0xfffffffc]). Panel, a popup or menu bar handle is invalid.

  Can someone help me with this?

  (1) the first thing to do is to include the error checking. All functions that helps provide a return value, but you prefer to ignore it. It is better, which is safer to check each function for correct operation. Use instead of AnimateCtrl...

  status = AnimateCtrl...

  If (status< 0="">

  (2) the error returned "Panel, pop up or a menu bar handle is invalid ' indicates that a Panel is not a handful of Panel or 'PNL_SPLASH_ANIMATION' is not a valid ring with photo control." Here are the names of the constants as defined in the file include your UIR file?

• PID control tools installation problem

  Hello

  I installed the PID control toolset and a message indicating that:

  "Error 1401. Could not create key. S...\Software\Microsoft. Check that you have sufficient access to that key, or contact your support staff. »

  Do you know what I have to do?

  Thank you

  This error indicates clearly a Windows permissions error. It seems that your administrator has given you limited administrative rights (for example, a member of the power users group), then your best bet is to display the error message for them and ask that they install the software, or to give you the rights to install it.

  EDIT: RF posted the answer at the same time...

• Control of TMS - problem Java conference center

  Hi all

  someone may have some experience for the following problem:

  In the menu start of TMS CCC - java starts to run and want to allow the user via kerberos / DC. SRV/DNS java through ask the DC´s of the field.

  Now, if java application the dc´s > thers is given a bunch of DC´s and RODC´s 2. TMS (Java) can only communicate with the RODC. But the reality is that java tries to connect to each domain controller (no) and then to the RODC. It takes sometimes up to 10 mins :-(.

  Zoning in AD is checked and correct, there is no other problems with the TMS server.

  Is there a way to force java only to use the RODC´s?

  Thanks a lot for some ideas...

  /Dirk

  Whence the limitation that TMS can communicate to the RODC, by firewall or strategy

  TMS/Java?

  You can fix it via DNS to return just the RODC, should not only solve your problem?

  If it's the firewall don't know if an inaccessible instead of dropping the icmp package would help as well.

  If its Java, perhaps a Java forum can be useful to check.

  If you do not get a better answer here and you think its TMS consider to prosecute TAC.

  Please keep us updated on how you fixed.

  Please remember useful frequency responses and identify useful or correct answers.

• control of database problems

  version 10g / 11g
  
  I have to recreate repository dbconsole whenever I re - start machine, + sound taking the most CPU + memory resource on the server, looking for tips to solve these 2 problems... I don't want to re - create, drop/create again and again... and how I can configure it shouldn't take high CPU + memory resurces...
  
  I have normally just re-create by following these steps
  http://www.Oracle-base.com/articles/Misc/BasicEnterpriseManagerTroubleshooting.php

  DBA2008 wrote:
  several operating systems like windows, linux & aix
  I'm unable to start dbconsole & receive errors...

  And these errors would be what?

  To hazard a guess yet almost nothing in the way of firm diagnosis, I'd be willing to bet that this server running DHCP, so IP address changes everytime you top up - and the dbcontrol is sensitive to the IP address.

• Control ActiveX Mozilla &amp; Plug in causes of support 1.0.0.4 my XP machine to get slow way. Is there a problem with it? I had to disable the Add On.

  With this active Add On, the system seems to be cycling in and out of repeated calls to "verify" something, I guess, adding an irritating delay for surfing the internet. I've seen no detrimental effect to the deactivation of this Add On to this day. It happens on some sites worse than others, but most is affected.

  Plug th Mozilla ActiveX Control is causing problems, and Mozilla have taken steps to block. Over the next few days a blocklist update should automatically be downloaded, which will result in this plugin automatically blocked.

• I can't see or access my saved PDF files (or icons) in my files or on my desktop of 64-bit windows 7 (catalyst control problem?).

  The only time where I can see them is when I'm about to save an another PDF to a file or to the desktop during 'save process' in which it contains some saved PDF files.

  I tried 'show desktop' and opening adobe reader to see the files or icons, but they will not show.

  I have a new HP computer with windows 7 64-bit and windows has failed twice. Time just after the new facility, just before I was able to create the rescue and then disk after two weeks of use; telling me to re - install! Now, months later, I have Catalyst Control Center errors / problems. So I don't know if it's all the partners. Should I reinstall windows and hope my rescue disc work?

  Maybe I should have asked "how to get a free replacement for a windows 7 lemon?

  Hello

  ·         Since when you are facing this problem?

  ·         Did you change your computer before this problem?

  Method 1:

   

  I suggest you to search for the problem in safe mode and see if it persists.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2:

  I suggest to change the save location and check if it helps.

  Method 3:

  I suggest you run Chkdsk and see if it works.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: Make sure that you take a backup of your data before performing the check disk on your computer.

  Method 4:

  I also suggest you to check user account again and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

• Agent of the NAC this SSL error

  Running

  CAM: 4.5.0 lite

  Current Windows clean access Agent Version: 4.5.0.0

  Current Windows clean access Agent Patch Version: 4.5.0.0

  Agent Macintosh's own access current version: 4.5.0.0

  Course Cisco NAC Web Agent Version: 4.5.0

  (Clean access windows agent installed on the host (Vista Business) is version 4.5.1.0)

  CAS mode: L2 virtual OOB GW

  The installation program is in conditions of laboratory for a proof of concept.

  The following scenario occurs each time a new authentication is attempted from a vista host running the agent access.

  -------------

  I plug the host on the controlled NAC switch port

  I get an ip address although my pool of vlan and dhcp auth

  Agent of Cisco clean access is displayed on the screen according to the normal

  I enter my user and pass and click login

  I get a "security alert" pop up indicating "the revocation information of the certificate for this site is not available. Do you want to continue? »

  There are 3 buttons to choose: Yes, no, display certificates

  I click Yes, but the error message does not disappear,... no matter how many times you click on Yes,... the error remains on the screen, keep you from making the connection.

  If I click on no.

  The clean access agent then says "network error!, detail: Certificate SSL REV failed [12057]."

  My only option is to click on the "Close" button so I don't

  This closes the agent clean access, but the agent instantly appears buck on my screen asking again user them and pass.

  I enter the right user and pass and click login

  I receive a new security alert pop up stating "this page requires a secure connection which includes server authentication." "The issuer of certificate for this site is unknown or unreliable, making you go?

  My click Options, Yes, no, view the certificate or more information

  I click on Yes, the security alert disappears and own access now States that I managed to connect to the network.

  It refreshes my IP address and puts me in the vlan correct based on the role of my user name.

  -------------

  I checked the event logs, all my access attempts are accepted, (on the 2nd try of course), but there is no errors in the cam on this SSL problem.

  However, I get a warning red text on the summary page of the cam, which stipulates the following, which I do not know if it has any impact on my problem.

  "WARNING: the end-entity certificate issued by"www.perfigo.com"is suitable for laboratory environments only." You must import a certificate of third party entity end for your own Access Manager and own access servers before the Cisco NAC Appliance deployment in a production environment. Please check your own access servers and ensures Clean Access Manager for similar messages.

  WARNING: The current "www.perfigo.com" trusted certification authority is suitable for laboratory environments only. Cisco recommends to import a third-party certification authority. Please check your own access servers and ensures Clean Access Manager for similar messages. »

  My questions are,

  -Why used the CAA accepts the first authentication attempt?

  -How can I remove the first security alert?

  -How can I set the CCA so that I login just once without having to click on no and wait for CAA to appear a 2nd time?

  Thank you all

  The fundamental problem is that the customer is unable to check the root certificate for your CASE.

  I guess that since you have always the perfigo warning that you have not installed a certificate valid on the job. If you did, you must remove the certificate of perfigo. If you install a valid certificate, you must remove the Perfigo cert.

  Once you have a valid cert installed, make sure that the client can access the certificate server root of the AUTH VLAN. That should get rid of these two messages.

  If you cannot provide access to the certificate server, then you cannot get rid of the second message, but you can get rid of the first message (the one that sticks you in a loop).

  This message (the first one) is due because the check certificate revocation in Internet Explorer has been enabled. This option has been disabled by default in XP, but is enabled by default in Vista. The option is disabled in Internet Options > Advanced tab > check the CRL.

• Why not junk detector permanently delete suspicious mail rather than send it to the junk e-mail folder? SOLVED caused by McAfee spam controls

  Recently, from a month ago or so, when I open Thunderbird and it connects to my ISP to download new e-mail messages, e-mails that the Junk detector "think" might be spam, these emails are deleted immediately permanently instead of being moved to my Junk folder, as I've mentioned Thunderbird in all options on how to manage junk e-mail. I know that there have been e-mails that were sent to me for the first time by a new friend or colleague whom I have not yet put in my contacts folder. In fact, I know an e-mail in particular when someone sent me his email address in the email that comes to be obtained permanently deleted. So if anyone knows what's happening here and what I can do to stop this behavior, I'd be very grateful all assistance. This time, to monitor the activity, I connect to my e-mail through my ISP account so I can examine what is in the Inbox ready to be downloaded in Thunderbird before you start Thunderbird. It is a nuisance, but is the only way I know for the moment to monitor all my incoming mail. Thank you!

  Sorry for the delay in the publication... Disable McAfee spam controls solve my problem. All incoming messages marked as spam is successfully sent to my junk e-mail folder.

  Thanks for your help!

• 22D133B: replaced charger DVD - no play, pause, stop, etc via the remote control

  Hello

  I have a 22D1333B in for repair because it would not play the DVD. I replaced the charger DVD (part No. 75040787) and the unit will now play DVDs ok but the DVD section will not respond to the remote control.

  All other TV functions operate via the remote control without any problem. It's just the DVD section.

  I cured the last of them by exchanging the PCB on the new DVD unit with that of the old unit, but this certainly isn't the way to address this problem.

  I downloaded and installed the software on the site of Vestel and updated the software for the Toshiba site. The fault remains.

  Any help to solve this problem would be welcome.

  T.I.A.

  In my opinion the new DVD drive isn't fully compatible with the remote control (type) RC1910 that was included in the box.

  I think you should get in contact with the authorized service provider to fix this