Control of BSOD kernal security failure on windows 8

Similar Questions

• Several BSOD on newly built computer, windows 7

  Hello

  This month of September, I built a new computer with the following parts:

  Processor with dual-core Intel Core i3-4130

  Noctua NH - L9i CPU Cooler

  Gigabyte GA - H87N - WIFI Mini ITX LGA1150 motherboard

  Corsair Dominator memory 16 GB DD3-1600 (2x8GB)

  SanDisk Ultra more SSD 128GB 2.5 "

  Seagate Barracuda 1 TB 3.5 "HDD 7200 RPM

  Asus GeForce GTX 660 2GB video card

  Antec Neo Eco 620W 80 + Bronze certified ATX power

  Windows 7 Home Premium

  A few days after that I got all of the courses, I had my first BSOD. Since then, I got 7 BSOD. I shared them here:

  https://onedrive.live.com/redir?RESID=34D9638EE4B297B9! 115 & authkey =! AOlGiuYFPHd4u_I & ithint = file %2 c

  Chkdisk, memtest86 and file system scanner were all negative. However, today, I tried to run the checker driver with the following parameters:

  Start > type "auditor" without quotes > select the following options.

  1. select - 'create a custom settings (for code developers).
  2 select - "choose custom a complete list settings.
  3 check the following boxes.
  -Special pool
  -Pool management
  -Force IRQL control
  -Detection of blockages
  -Security controls (Windows 7 & 8)
  -DDI compliance review (Windows 8)
  -Cheques
  4 select - "select the driver names from a list.
  5 click the 'supplier '. This will cause the sorting of all drivers by the provider.
  6 check EACH box that is NOT provided by Microsoft / Microsoft Corporation.
  7 click Finish.
  8 restart.

  This proved without error. However, when I tried to run to the Verifier again with EVERYTHING checked, he started a BSOD loop. I started in Mode safe, disabled driver verifier and then to go and check my MiniDump, but there was no news. DMP file there. I don't know why.

  I really hope this isn't a hardware problem, since I just bought all these parts recently. The computer also works great otherwise. As far as I know, the BSOD seems to happen when I leave the computer for more than 72 hours straight.

  If someone could please help me out, I'd be very happy.

  MGV

  The most recent was checked and linked to your video driver driver.  I download this new driver available, remove the current and then install a new one without having to reboot

  

• Watch DRIVER BSOD error - STATE-FAILURE of CURRENT

  Hi, I have Windows 8 in HP Pavilion G6. Problem and a large number of errors are occurring in my laptop. I have refreshed, restored, reset and re-installed my Windows several times. Most of the problems occurred in the Bluetooth driver. Every time after that resetting or refreshing, Bluetooth my work for 2-3 days and then she also stops working. Also scanned my system with Norton internet security and Microsoft Windows Defender and Third-software No. third are installed in my system. Can someone help me with this problem? I downloaded the Minidump files on SkyDrive ( https://onedrive.live.com/redir?resid=22D347B8F78B247D%21167 ) caused due to the blue screen (BSOD error shows PILOT - STATE-FAILURE of CURRENT)

  Original title: blue screen of death in Windows 8

  9F error checking, {4, 12 c, fffffa8007b4e200, fffff8015e8a8780}

  WARNING: Unable to verify timestamp for win32k.sys
  ERROR: Module load completed but symbols can be loaded for win32k.sys
  Probably caused by: memory_corruption

  DRIVER_POWER_STATE_FAILURE (9f)
  A driver is causing an inconsistent power state.
  Arguments:
  Arg1: 0000000000000004, the change in diet has expired waiting to synchronize with the Pnp
  subsystem.
  Arg2: 000000000000012c, the time-out in seconds.
  Arg3: fffffa8007b4e200, the thread that currently holds the lock of Pnp.
  Arg4: fffff8015e8a8780

  Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE.

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff559329 (v = vs. 85) .aspx

  Resolution error blue screen in Windows.

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  Uninstall Norton and turn on Windows Defender.

  Norton Removal Tool.

  https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

  How to turn Windows Defender real-time Protection on or off in Windows 8 and 8.1.

  http://www.eightforums.com/tutorials/21967-Windows-Defender-protection-turn-off-Windows-8-a.html

  Uninstall and reinstall all the network drivers, including Bluetooth.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5189545#n617

  Note: Please confirm that the model in the above link is yours, before continuing.

  In addition,

  Please download a copy of your system information file. Click 'Start' , type "msinfo32" , click on "file" at the top of the page, select "Export" and enter a name for the file and click 'Save'. " Navigate to the file and download the text file generated in a public folder on your onedrive and post the link here.

• security update were not installed security update for Windows XP (KB956572) (update 1 of 1)...

  security update were not installed security update for Windows XP (KB956572) (update 1 of 1)... The amendments failure disappeared many times
  kindly help to solve

  Hi DEVOO,.

  Follow the steps listed in the link below: how to troubleshoot Windows Update, Microsoft Update and Windows Server Update Services installation issues: http://support.microsoft.com/kb/906602/

  Then install the standalone update package. You can download the stand-alone version of the link below: http://www.microsoft.com/downloads/details.aspx?familyid=73d2324f-be59-4b0c-b1ac-9876a13c2c03&displaylang=en and check if the problem is resolved.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you do the automatic updates of Windows Vista I get the "Security Update for Windows Media Format Runtime 11 for Windows Vista (KB968816)" = Failed__

  When you do the automatic updates of Windows Vista, I get the code below.

  'A security update for Windows Media Format Runtime 11 for Windows Vista (KB968816)' = failure

  • What should I do to fix this?
  • And what does this update actually?

  Thanks for any help provided.

  scrubie,
  If you go to programs and features, and then on the left side you should see a link for "Daily display installed."  Which would then show the list of updates with the State which will show you if it failed or not.

  Hope that helps. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I open [control configuration\systeme and Security\System] (computer properties) of an execution command?

  I looked around and can't seem to find the answer to this. How to open the properties of the computer [control configuration\systeme and Security\System] (aka system CPL) with a command?

  Oh, I'm sorry, I did not understand what you want.  Try this in a command prompt window or start > run box:

  Control/Name microsoft.system Boulder computer Maven
  Most Microsoft Valuable Professional

• Whenever the failure of Windows 7 Pro upgrade

  The upgrade from Win 7 Pro home. Complete upgrading to 100% then fails and returns home. The event log shows "Package Windows Home Premium Edition failed will be replaced by the Absent State. Status: 0x80070002.and Package Windows Professional Edition doesn't have to be changed to the Installed State. Status: 0 x 80070002. »

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections =.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  Only one solution was either by picking up the Internet
  and removal of SP1 - or a combination of both. Then re-installation of SP1
  Save this method for a last resort.

  --------------------------------------------------------------------

  (C) you get a PIN number with the "Anytime Upgrade", if yes enter the PIN here to obtain a product key:

  https://Windows.getmicrosoftkey.com/

  Support for your product key: https://windows.getmicrosoftkey.com/Home/Support

  --------------------------------------------------------------------

  (C) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies in the)

  lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (D) if still Anytime Upgrade fails, disable the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (E) if it continues to fail, try the following 3 methods:
  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press Enter to open

  Free memory diagnostic tool. Click restart now and check for problems. Your computer will restart & program diagnosis

  will begin. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or confirmation, type

  password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is invalid and you must change the key, in that you may need to Open regedit and delete the value ProductKey

  the following registry key first:

  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  - Express upgrade may not work for all versions of Windows -

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have some OEM and or

  Product keys for system builders, this applies also to VL (Volume License), - MSDN Academic Alliance (MSDNAA) or educational

  Keys that do not work and take over the Anytime Upgrade option. KMS users should consult with your administrator before

  you want to make an Express upgrade.

  J W Stuart: http://www.pagestart.com

• Failure of Windows 7 Anytime Upgrade on the new computer laptop

  Hello

  We just bought a new Asus laptop that came with Windows 7 Starter as standard.

  A week later, we bought an Express Upgrade Home Premium 7.

  The upgrade has failed at first time around; following the advice of the community, I tried the following:

  Check all updates;

  Installed the CheckSUR tool fix;

  Disabled user account control;

  Disabled antivirus;

  The hard drive to find errors;

  Profiled selective startup in MSConfig.

  In the end, I got was a "invalid product key" - which it is not.

  Windows displays as entered, and I have SP1.

  As a last resort, I have reset the specifications of the factory and tried the Express upgrade as the first thing on the PC 'cost '. Upgrade failed after 25 minutes.

  In the very final resort, I reset all the solutions above workaround to the specifications of the factory again, re-directed (except by disabling the antivirus because I have not reinstalled which again - there is only Windows Firewall between me and the world wide). Update failed.

  I just tried to disable the Windows Firewall and tried the upgrade - my product key verified program, was asked to accept the terms, told me it would be as little as 10 minutes - but now it's to say the upgrade button that I entered is a version of Windows that does not work with the Express upgrade... but it IS an Express upgrade.

  It took nine days so far - please you have the magic answer? Thank you waiting...!

  You have already done most of what I have posted, but it can't hurt to read and review as it is possible that you missed.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  (C) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (D) if still Anytime Upgrade fails, disable the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (E) if it continues to fail, try the following 3 methods:
  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press ENTER to open the memory diagnostic tool open. Click restart now and check for problems. Your computer will restart and will start the diagnostic program. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:

  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators systems product keys, this also applies to the VL (Volume License), - MSDN Academic Alliance (MSDNAA) or products keys that do not work and take over the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com

• Failed to update Windows 8 (KB2756872, KB2768703), happens to 30% then get error "failure Configuring Windows updated. Changes in return ".

  I installed 2 updates.

  I installed both of them using the standalone installer which.
  First, I checked the updates using Windows updates and then installer of stand-alone download from the link more information if I can use this update later.

  Here are the 2 updates I try to install:
  1 Windows8-RT-KB2756872 - x 64
  2 Windows8-RT-KB2768703 - x 64

  I rebooted my system after installing the updates.
  Windows configures updates up to about 30% and the system gets stopped and restarted.
  Then he went it 100% and all of a sudden, I got a message something like:
  "Failure of Windows updated. Changes in return ".
  It is just returned

  Here are all the logs files (CBS.log, WindowsUpdate.log, WindowsUpdate (1) .log)
  http://bobdn.com/files/logs.zip

  Please tell me how can I get the update installed successfully.

  I finally solved my problem with the update kb2756872 ("update failed, returning of changes"). It was caused by the reserved partition Windows is not set to active (I dual boot using GRUB). Go to the Control Panel-> administrative tools control->-> computer managementdisk management and make sure that the reserved partition is marked 'Active'. This also solves many other problems I experienced as not able to activate Windows startup settings.

• Update Windows Installer KB3002885 (and later KB3000061) causes "Failure Configuring Windows Updates, changes of restoration"

  I manually ran Windows Update for about 22 updates including KB3002885 (KB3000061 is not included at this time).  It resulted in "Failure Configuring Windows Updates, changes of recovery".

  Measures taken (without the fix):

  -Reboot

  -Restart in Boot Clean with Services MS no disabled state

  -Updated Troubleshotter

  -System Restore (3 weeks)

  -DISM.exe / Online/Cleanup-image /Restorehealth

  I started installing updates a little at a time and was able to install all the updates about 22 except KB3002885, which always causes the problem 'failure configuration... '. ».

  Updates at this point (November 14, 2014) identified KB3000061.  When update was executed for this update by itself it also caused the problem of the "default configuration... '. ».

  Updates about 22 that have been installed successfully some of them were: KB3000853, KB3004150, KB3003057, KB2978121 and KB2972101.  A more complete list is available if it is useful.

  Windows 8 Pro 64 bit w / Media Center

  Norton Security Suite

  THAT IS TO SAY 10.0.9200.17148

  Worm update: 10.0.22

  Perhaps relevant: I could never update this computer Windows 8.1 in 5 or 6 attempts over a period of 6 months.  Always comes back to the previously installed Windows 8.

  Otherwise, my computer works without other unusual problems.

  Hi Brad,

  Thank you for your response.

  For problems with the upgrade to Windows 8.1, I suggest you refer to the suggestion of Madeni K N replied on 8 January 2014.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/error-0xc1900101-0x40017-when-installing-Windows/8c893ae6-0e9b-4b7d-a647-b9065099efd6?page=1&TM=1389602587060

  For more information, you can check the link below.

  Update to Windows 8.1 of Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Failure of windows updates changes to recovery (using Windows 8). Turn a computer off

  I did a refresh with Acer laptop and lost everything. RELOADED Office 2013 and some applications after if and it seemed to work.

  I went to then turn off the laptop and he tried to update about 72 updates. After 30 minutes, the message "preparation set up windows" do not turn off computer. When he tries to restart, the message "failure configuration windows update changes back? rises.

  He continues to do in cycles?

  Help

  JOhn

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  You need to disconnect all your removable media to the computer, such as removable disks (Blu - ray disc, DVD, CD), the memory cards (CompactFlash, Secure Digital card, Memory Stick card), and USB flash drives.
  These removable media can cause this problem during the restart of Windows.

  or

  System restore - Note if your computer is not configured to start from a CD or a DVD, or if Windows was preinstalled on your computer without the CD or DVD, see the documentation that came with the computer for instruction about how to continue, or go to the next method.

• I Don t see a button on the remote control to the top of the iTunes window

  I m trying to use the Remote app in my Apple Watch but I Don t see a button on the remote control to the top of the iTunes window to fit with my music library

  Hello

  The button on the remote control will appear in iTunes once you have tapped on the device to add within the Remote on Apple Watch app. Note that your computer and the watch must be connected to the same Wi - Fi network.

  In iTunes 12 and, later, the remote control button is located to the upper left, under the Volume slider. In iTunes 11 and earlier versions, the remote control is at the top right, under the search box.

  More information:

  Use Apple Watch as a remote for iTunes or Apple TV - Apple Support

• Windows 8 failure configuring Windows updates: my sytem keeps refusing to upgrade.

  Whenever I try to load the Windows updates, that it goes through a process at length check and then refuses to load.  It then goes through another process at length:

  Failure of Windows dates

  Restoration of the changes

  Do not turn off your computer

  How fix us this problem?  I would like to upgrade to Windows 8 to 8.1, but the system keeps refusing the upgrade process.  Do I need new drivers Windows installed?  I do a lot of graphic work.  Would be the removal of the player above: AMD driver miniport multi-vendor affects the use of my graphics card?  Just bought the 23 inch want all-in-one model: 23-d203d with intel i7 - 3770 s processor 3.10 GHz with 4 GB 64-Bit system

  Thank you for your help and suggestion.  I used the format of trouble shooter.  He made a few corrections and some updates have been installed in the difficulty but also said there are 2 corrupt files do not set. Do not understand how this can be in a whole new system. Anyway I still can't upgrade windows 8.1 store.  Have any suggestions or should I just leave him alone, as is?

• Failure of windows updated y580 configuration

  I get the message "failure of windows updates changes to return" when I try to update my computer, can someone please help with this? How can I make sure that updates are going through?

  ' afternoon.

  Please check if KB2647753 is in your list of updates to install. If so, install everything first, everything about him with no other update selected. do a required restart. Once installed successfully, all others must succeed. It is a known Microsoft issue.

  Please let us know if it works for you.

  Kind regards.

• Security pop-up windows.

  I also don't want to be asked by a security pop-up windows 'sometimes' as username and password-never used to. I've been using windows mail, and until recently, all very well. The only remedy is to change my email account?

  Check the advanced settings (to it) on your e-mail account configuration.