Control of heating/cooling (Peltier) in DC (not PWM)

Similar Questions

• Control Panel more HP Officejet Pro 8600 not lit and will not work

  Control Panel more HP Officejet Pro 8600 not lit and will not work. It worked except the last 4 days. I can use certain features of the computer as a scan but can not manually use Control Panel. Nothing DOES not illuminate. The power button is on but only weakly.

  Hi kwhofms,

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• Application of Satellite P200 heating/cooling

  Hi all

  I'm popping up this question because my P200 will soon be available at the end of its warranty, and I don't know if it is useful to do a repair for the next 'disease' or if, in fact, others have found a similar effect or knows that it is in the normal operating parameters.

  After execution of any fairly intensive program, just like one of my pieces from the analysis of the data from the software or game, for a period of time (for example, one hour), I noticed that the wind/radiator on the right near the hinges of the screen is very hot - uncomfortable to touch and to the point if it was warm I would be unable to touch at all. The base of the machine is also worrying hot. Anyone who has observed this, is it indicative of the early stages of an overheating problem and I expect the system looked at? I think that the computer can run a bit slower as I remember in a first time do, but I don't have any solid data to support that.

  Thanks a lot for the ideas and opinions!

  Michael.

  > After execution of any fairly intensive program, just like one of my pieces from the analysis of the data from the software or game, for a period of time (for example, one hour), I noticed that the wind/heater on the right side near the hinges of the screen is very hot

  I'll try to explain your problem.
  Fans and cooling modules are placed on the right side of the laptop.

  It is a laptop upscale. It was equipped with a high-performance CPU and graphics card. And it turns out that these devices produce a lot of heat when running with a maximum return.

  This leads to a temperature higher inside the laptop.
  The fans blow the hot air outside the laptop and so the right side is hotter than the left side.

  I have a question;
  Which driver of video card you are using?

  You should always use the Toshiba designed graphics drivers because these drivers support and protection against overheating. If the temperature of the GPU would rise to a higher level, then the graphics card driver would decrease performance GPU to make sure that the chip would not overheat. This protection is necessary because the graphics of mobile phones are not equipped with the huge cooling modules like graphics cards for desktop PC.

  Non-Toshiba driver graphics don t support this protection and this could lead to a higher temperature and overheating and finally, it could damage the GPU!

  So you should always use the Toshiba GPU drivers to prevent overheating of the equipment/laptop!

  Greetings mate

• Fan Heatsink of heat/cooling A25-S307 problem

  I have this model A25-S307 for more than 2 years recently I started noticing that my laptop will heat up soon. Although the cooling fan starts, it doesn't do any good. And sometimes even if it's very hot, cooling fan not kick.

  Any suggestions on how this can be corrected.

  Thank you
  BKM

  Hello

  Yes, you are right, you have a heating problem.

  As a first step, you can try to de - and reinstall the Toshiba Power Saver and sett it by default (the energy saver manages the FAN speed!). Then you can check your BIOS settings. Also the default Sett! After that, you should observe that the FAN in the laptop is running. If this does not resolve the problem in my opinion some hardware may be the fan is damaged!

  The best way to avoid damage to the CPU is to contact a Toshiba Service partner.

  As far as I knoe the A25 is an American model, so I have to go to
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp
  and click on repair center.

  If you live in Europe, go to http://eu.computers.toshiba-europe.com - Support & downloads - find an authorized Service partner

• BlackBerry smartphones HELP! Ball control and keys doesn't work does not correctly!

  I have the curve 8330 and when I put in my unlock code and press the trackball, it acts as if im entering additional keys. When I finally get into the phone and try to press on the trackball, in its action, as if I am pressing the asterisk key. It does not correctly read the keys and is to register them as another key! Help pleaaase!

  This looks like what I've seen several times on a device with moisture damage.

  Even sitting on a countertop bath during a hot steamy shower or bath can cause problems with keyboard and trackball up to this JUST-withered.

  Really, it is more common than you think.

  1 the battery immediately! Do not turn on your BlackBerry device.

  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)

  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).

  3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  * Suggestions on your BlackBerry in a warm dry place (open, with battery):

  • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
  • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  • On the dashboard of your car on a day sunny

• and control the YouTube volume scroll bar does not appear in firefox

  I just notice that most of the time I don't get the bar volume control bar /scroll in the page of youtube, it's hidden when I open a video link. I can see cut the scroll bar, but no control of volume or not the button fullscreen. everything looks good in full screenmode only. pls help. I tried to update all the latest plugins available, but it seems something else. Thank you for your help

  It is up to the web pages and Adobe Designer. Flash works in Firefox in the form of application.

• From the control panel NVIDIA Win8.1 update does not work

  Since the system op Win 8.1 update, I am not able to get into the Nvidea Control Panel. I get a message that are not connected. I got the card Nvidea my main source for the monitor.

  Help appreciated.

  I guess you read the instructions step by step how to upgrade the system of 8 to 8.1 Win Win
  Did you? Did you follow this teaching?

  You update and install the driver nVidia essential to win the 8.1 that is available on the website of driver Toshiba?
  If this is not the case, this!

• Satellite A-C50-1DN - Control Centre of Nvidia's Win7 can not find material

  Hello

  I changed the Win8 to Win7 and everything works fine.

  But I can't get the graphics card from Nvidia to run. I downloaded the driver from the Toshiba page and I can install it without any problem.

  But if I start the Nvidia control center, it tells me that it cannot find any Nvidia hardware.

  The windows Device Manager tells me that the driver of a 3D-Videocontroller is missing.
  But win7 can not install it automatically.

  Can someone help me solve this problem?

  Best regards
  Olum

  > But I can't get the graphics card from Nvidia to run

  Sorry mate but I put t understand it. You said that the nVidia display driver might be installed correctly without any error message.
  You can what entries see in device-> graphics card Manager

  The laptop supports the NVIDIA® GeForce® GT740M w / Optimus (this is an external chip). The device supports also the internal Intel HD Graphics 4000 (this GPU Intel is part of the processor Intel CORE I3 - 3110M)
  The two cards (nVidia and Intel GPU) must be listed in the Device Manager.

• The media controls on my Satellite 2450 S203 do not work

  Hello

  On my Toshiba Satellite S2450 S203 media controls do not work you had no idea what's wrong?

  This means that they have suddenly stopped working? One last thing: you didn't describe when it does not work (no OS not running or running). As far as I know, they work even when OS is not started.

• Cancel the Parental control, because I'm the Parent: but not Administrator of my computer

  I myself blocked on my computer. I didn't know that Apple was the administrator of the computer, and I was a user. I turned on the 'enable parental control' to limit the spending of my adolescence, while using my apple ID. I didn't know I was putting controls on myself. I tried everything-

  (1) connected on Mac of my son tried to remote access, file sharing, etc. He is a Director on his computer, and we've even created a new user on his computer. Nothing has worked.

  (2) tried questions help and support, impossible to find a way around it.

  (3) I've changed my password, now I can't even shut down the computer.

  I can't believe that this happened to someone, somewhere, and it's so easy to do.

  Help, please! I tried everything-

  Please take these steps to restore the privileges on your account. This somewhat tedious procedure is only necessary if you have verified that no work administrator account exists on the system.

  If you do not already have a current backup of all your data, you must back up before taking any of the steps below. Ask if you need advice. You won't need the backup unless something goes wrong, which is always possible.

  Step 1

  Start in recovery mode. The OS X Utilities appears.

  Step 2

  This step only if you use FileVault 2. Start utility disk, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  Step 3

  Select

  Utilities ▹ Terminal

  in the menu bar. In the window that opens, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. Select your boot if not already done volume. Pull down the menu option

  Select the user account

  and select

  Administrator (root)

  Follow the prompts to set a password. It is safer to choose a password that includes only the characters a - z, A - Z and 0-9. I suggest that you write the password. If you don't write it down and forget about it, you will start again at step 1.

  Select

   ▹ Reboot...

  in the menu bar.

  Step 4

  This step, as step 2, applies only if you use FileVault. Sign up as usual, then select

   ▹ Disconnect...

  from the menu bar or press shift-command-Q key combination. Do not restart. You go back to the login screen.

  Step 5

  On the login screen, click on the other... Enter 'root' (without the quotes) in the name field and the password set in step 3 in the password field. You should now be logged in as root. It is a potentially dangerous situation. Do nothing by being logged in as root except as indicated below. You'll be fine as long as you don't dismiss the plan.

  Open the preferences users and groups window. Select your usual administrator account from the list of users and check the box marked

  Allow the user to administer this computer

  You will be prompted to restart. Do this and log in as yourself, not as root. Your administrator status should now be restored.

  Step 6 (optional, but recommended)

  Follow the instructions in this article to support under the title "disable the root user. You must authenticate in directory utility as a 'root' with the password set in step 3. As another administrator authentication will not work.

  Credit for this idea of NCP member wessongroup.

• ICAN can't uninstall Justcloud. I tried Control Panel, add/remove, but he did not remove it. What can I do?

  Very well... I downloaded Justcloud but failed to read the terms and policies. I want either, so I tried to uninstall it by going into the control panel and clicking Add/Remove, but Justcloud would not uninstall. I'm a novice at this and I don't really know what to do to get this from my computer. It's the first day of a 14-day free-trial which Justcloud offered. I really need this uninstalled before the end of this trial period because I do not share the terms and policy and I will not be forced.

  [Moved from comments]

  Hi Shawn,

  System Restore can return programs and system files from your PC to a time when everything was working well. This will not affect your documents, images or other data.

  Do a System Restore to an earlier date and check if it works.

  System restore

  What is system restore? (Vista)  

  How to restore Windows XP to a previous state

  Good day!

  Answer please if you have any questions.

• I want to uninstall real player. I went to the control panel to uninstall, but it was not listed.

  Original title: real player not on the list of programs but still doesn't work

  I want to uninstall real player. I went to the control panel to uninstall, but it was listed.  I can always download with real player. What's new? Why is not listed if I can get rid of him.

  Hello

  What operating system are you using on your computer?

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  a. click Startand then click run.

  (b) in the Open box, type regedt32, and then click OK.

  c. in the registry editor, find the following registry key:

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall

  d. in the left pane, click the Uninstall registry key, and then click export on the file menu.

  e. in the export registry file dialog box that appears, click desktop in the list record in , type Uninstall in the file name box, and then click Save.

  f. each key listed under Uninstall in the left pane of Registry Editor represents a program that is displayed in the list of currently installed programs in the add tool / remove programs. To determine which program that represents each key, click the key and discovers the following values in the details on the right pane:

  Full name: the Display Name key value data the name listed in Add / Remove programs.

  - and -

  UninstallString: The value of the UninstallString key data the program used to uninstall the program.

  g. After you identify the registry key that represents the program that you removed but which is still displayed in the currently installed programs list of add or remove programs, right-click the key in the left of the registry editor window pane and then click Remove.

  Click Yes in response to the message "are you sure you want to delete this key and all of its subkeys?

  h. on the file menu, click Exit to quit the registry editor.

  i. click Start, click Control Paneland then click on Add / Remove Programs.

  In the currently installed programs list, verify that the program whose registry key you deleted is no longer listed.

  j. do one of the following:

  o If the program list is not correct in Add / Remove Programs, double-click the file Uninstall.reg that you saved on your desktop in step 5 to restore the original list of programs in the registry.

  -or-

  o If the program list is correct in Add / Remove Programs, right-click the Uninstall.reg file on your desktop and then click Remove.

  For more information, you can check the link below:

  http://support.Microsoft.com/kb/314481

• Key 'Control' is 'pressed' automatically... and not by me (Vista)

  Help!

  I have a new Dell with Vista home basic OS laptop. At random times, my computer is by pressing the function key "automatically" on me, so to speak. For example, I go get the text (in any program), and the shortcut associated with this letter appears suddenly, as if I had pressed the control key. For example, I'm going to type 'h' and the 'history' option opens in Internet Explorer, or the "Find and replace" option in Word. Yet once, it happens randomly and not on every key shot (it seems to happen once every typed phrases). It is not a problem and I've lost large portions of text because of this unexpected behavior; the most questionable when I have an important project Center academic, I need to finish soon...

  Dell has tried any hardware related (appearantly), including sending me a new keyboard in case the control key was somehow be activated through a faulty keyboard. Dell wants me to re-install Vista, but I'm not confident, I can back up everything, etc with my semi little computer experience. In addition, this seems a rather "extreme" solution to something that must be a software related and solvable if all goes well. I think that the computer was good initially, but this began to happen shortly after (I got it since the summer, approximately). Curiously, it didn't happen by writing this post; no idea why (maybe a clue in of itself?).

  Thank you!

  Try this:
  Check if your 'sticky keys' is 'On', it turns "Off":
  1. go into the control panel.
  2. double click on 'accessibility '.
  3. under "Make your computer easier to use", click on "Make the keyboard easier to use".
  4. under "Make it easier to type" click to uncheck the box before "Tour sticky keys" to uncheck.
  5. click on 'Apply' and ' "Save"

• STROKE (Application Visibilty Control) on WLC 5508 7.5 do not display data

  Dear all

  My WLC has problem...

  the STROKE is not display data (graphic or otherwise)

  I have already set up two Wlan id with the visibility control, but two of them do not display data...

  Here is my setup place WLC 5508...

  My WLC running on OS 7.5

  pack 1.0 protocol version

  NBAR engine 13.0

  AUS 6.0.182.0

  Cisco controller) > see the version of the Protocol-pack stroke

   

  Protocol STROKE Pack name: Protocol Advanced Pack

  Protocol STROKE Pack Version: 1.0

   

  (Cisco Controller) > show stroke engine version

   

  Version of the engine STROKE: 13

   

  (Cisco Controller) > show sysinfo

   

  Name of the manufacturer... Cisco Systems Inc..

  Product name... Cisco controller

  Version of the product... 7.5.102.0

  Bootloader Version... 1.0.1

  Retrieving Image Version field... 6.0.182.0

  Firmware version... Console USB 1.3, 1.6 Env FPGA, 1.27

  even from CLI still do not display data

  (Cisco Controller) >Show stroke statistics upstream applications top

   

  Perspective of the STROKE is 0 for all applications.

  MISTLETOE on attachment configuration capture

  Need your advice is there any configuration that I miss... ??

   

  As long as you go to the STROKE centre should work in Flexconnect. You can check the AP mode under wireless > click on any access point.

  http://www.Cisco.com/c/en/us/support/docs/wireless/5500-Series-Wireless-...

• Mixer volume for the speaker shows controls a device called a name is not not available and generates internet audio randome at startup.

  No visual source audio stream, does appear, that sounds like a TV to the scan mode.  I can turn off the audio controls, but it restarts everytime I turn on the computer.  I can't find anything at the start that I can identify as the culprit.  Also, it stops if I disconnect from the internet.  I have a FIOS internet DSL and a wireless router.  This just started happening a few days ago.  System Restore does not resolve it.

  Hi William,.

  1 do you have the new Windows updates recently?

  2. were there any changes (hardware or software) to the computer before the show?

  The problem can occur if the sound card drivers are not updated. It can also occur if there is malware present on the computer.

  Method 1: Update sound drivers and check if it helps.

  Update a hardware driver that is not working properly(Windows 7)

  Method 2: use the Microsoft Safety Scanner in full scan mode and to remove all the threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Please make a backup of all the data to an external hard drive before performing a scan because it might cause data loss.

  Note: do see you this device in the Device Manager, in the affirmative, then right-click on it and uninstall it and see if it works.

  Answer please if you have any questions.