Fan Heatsink of heat/cooling A25-S307 problem

Similar Questions

• G62 - b45EM: compatibility FAN HEATSINK CPU Cooler

  Hello

  My cooling system no longer works. I'm in the process of buying a new one. During my research, I discovered that alternative parta of coolers CPU model number differ. Some have 606609-001 other 612355-001. But in any case, he says its for series G62. I wonder - is it important?

  More precisely, the CPU's cooler for G62-b01sl G62-b45EM compatible?

  Thank you for your response.

  Here are the specifications of the

  G62-b45EM:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02556539

  You have switchable graphics with 1 GB discrete card.

  Repair manuals

  This is the correct fan/radiator module:

  Discrete systems 606014-001

  http://www.eBay.com/ITM/new-for-HP-Compaq-G62-CQ62-G72-CPU-Fan-Heatsink-606014-001-free-thermal-paste-/251767167945?hash=item3a9e7e1bc9:g:iwgAAOxyrYFR0H7y

  

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• A25-S307 graphics card problem...

  Hello..
  I have an A25-S307.
  As you know it uses 32 MB of 512 MB of Ram for the graphics card.
  But the ram adapter shown as it is 16 MB.
  What is the solution to again make 32 MB?

  Hi Qripto,

  I know that the Satellite A25 is a laptop computer to the United States, did, you update your displaydriver from toshiba U.S. page?

  http://www.CSD.Toshiba.com

  Bye Rudi68

• Fan control with 5750G and other machines problems

  Lets start with stating that the 5750 G (and other models with same design cases) has lots of GPU and overheating problems:

  • Overheating 5742: http://community.acer.com/t5/Acer-Notebooks-Netbooks/Entire-CPU-Overheating/m-p/10233#U10233
  • 5552 overheating: http://community.acer.com/t5/Acer-Notebooks-Netbooks/Overheating/m-p/8221#U8221
  • 5745 G overheating: http://community.acer.com/t5/Acer-Notebooks-Netbooks/GPU-Overheated/m-p/10189#U10189

  As well as the mysterious GPU problems:

  • http://community.Acer.com/T5/Acer-notebooks-netbooks/Acer-5750G-GT540M-problem/m-p/8061#U8061

  This problem is happing on computers between 12 and 20 old frames. Although the user

  • Using a fresh install of windows.
  • Uses the latest GPU driver.
  • Use the BIOS more recent (1.21 for my 5750G).
  • A cleaned the dust from heatsink and fan.

  So that's the problem! Thermal and non-functioning fan control past!

  So it goes like this:

  End of one your PC starts to slow down: This is because the heat past at low price, acer puts on their laptop begins to degrade. This means that even if the fan trying to cool the CPU and the GPU. The heat generated by the CPU and the GPU may be transferred on the radiator. Thus the CPU and the GPU lower their performance so that the computer does not so hot that it cannot work. And damage the CPU and the GPU.

  After a bit more time the PC begins to close when you use more intense programs / games:
  This is because that which has degraded the heat past so that the computer becomes so hot than its cutting himself to avoid damaging himself.

  So what's the problem?: I mean that acer can not simply replace past heat each contact? So what can they DO?

  Here's what Acer should do: Do a BIOS 1.22 WITH CUSTOM FAN CONTROL!
  It would be easy! While the main problem is the thermal past. There is another problem:

  Fan will not go 100%: when my 5750 hits 95 degrees Celsius. It is still running the fan speed of ~ 60-70%!
  When it hit 103 degrees Celsius. Just 2 degrees, far from extinguished to prevent critical damage. She is STILL going to ~ 60-70%! Acer... I know that the fan can be turned to a higher speed. Because when I turn on my 5750G after he himself has just cut off due to overheating. He rotates extremely fast fan! But just for a few seconds. Then he goes back to the being to slow to cool enough.

  Acer... Why not do that? ! : Come on Acer! Do it! Make a new BIOS, I would be happy. And I know that Acer is not a * beep * ty company. But actually listens to their customers! If your worried that some people would go in the BIOS and the fan settings so that they broke the laptop. Then just have a big WARNING: "Guarantee will be woid entering this option" or a "to activate this option go to Acer.com/XXXX and type the code. Follow-up of the caveat "the guarantee will be void.

  Please Acer. Give people who know what they make of the option to do so!

  Im going to this ends with a quote from another post on your forum:

  «I look a little, but have not found anything to give a bit more power the fan...»
  Acer could not just add a few adjustments of fan to the bios?

  Quote this post: http://community.acer.com/t5/Acer-Notebooks-Netbooks/Entire-CPU-Overheating/m-p/12211/highlight/fals...

  Hello

  Today I can finally post what you are waiting for. The fan controller tool was developed in a public place.
  Anyone who decides to install this tool, please take note once more:

  • Acer does not support this tool on systems from laptops Aspire 5750 G / 5755G.
  
  
  • Acer does not support this tool on Acer OEM Software (your laptop comes with Windows 7 installation).
  
  
  • Users with other portable model should not use this tool. This will be entirely at your own risk.
  
  
  • Other OS can run this tool, but Acer does not test or review it. Acer is not responsible for any bad consequences when using the tool in that mentioned other environments.

  Official statements made, here are the goodies. Be sure to download the PDF file as well, if you want to check the installation process:
  FTP://ftp2.Acer-euro.com/notebook/aspire_5750G/fan/FanController_V1.0.0.3.zip
  FTP://ftp2.Acer-euro.com/notebook/aspire_5750G/fan/SOP_AS5750G_Fan_Control_Utility.PDF

  Feel free to have a discussion open after this post on the results. I tell you what I'll be less frequent in this topic, though.

  Anyone who still has problems when running this tool is advised to contact Acer support and get their laptop repaired.

  We thank all for your patience, hope that this helps out you.

  Kind regards

  Rolf

• Fan/Heatsink Assembly thermal Ribbon

  Hi, I received my fan and heatsink of heat today and inside he received instructions for the application of thermal paste with a syringe which is included in the box. As well as alcahol wipes.

  I don't have a syringe to dough, or wipes. Instead I got what looks like heat, already glued Ribbon on my radiators, what do I do with this, or did HP just send me the wrong compound?

  Thank you, Tim.

  This is the factory applied thermal paste. I think they use a machine to do it. The compound is sticky but is not intended to serve as a glue if that's what you mean. It transfers heat effectively. You see the same type of geometric dab of thermal paste on the standard fan/radiator units equipped with processors in a box. It is intended for one time use. When I was building platforms high performance, that I used to wipe this kind of things off and apply my own money, Arctic, but on a laptop that is not necessary. You could not apply a more perfect amount of cooling made up if you tried. Yet once, in the days when I was building high performance machines, I used 'lap' surfaces from the top of the heart of processor or the cover and the bottom of the radiator using ultrafine or even automobile Emery cloth, Polish, then clean with alcohol and then apply thermal paste. Smooth the surface the better cooling. The surfaces on the fan and the heatsink are smooth already, but you can clean the top of the core processor well with just a little alcohol to remove residues. Then, mount the fan/radiator. Attention with the torque on the screws. Good luck.

• Pavilion Dv6-6104NR Coolin fan: pavilion Dv6-6104NR cooling fan

  On my laptop cooling fan makes a terrible uproar, and I know that I need to replace.  I also know that I need the fan WITH the heatsink cooling. But online sources give a variety of part numbers and I don't know which is correct.

  Please provide the manufacturer AND recommended retailers.  See phone details below.    Thank you in advance!

  Pavilion Dv6-6104NR

  Product # QG289UA #ABA

  Processor: AMD Phenom II Quad-Core P960

  (a post for another model, I've seen mentioned buying the part on eBay, but that seemed risky to me.)  Therefore, please tell us the retail sources, too).  Thank you!

  Hello
  
  Looking heatsink of heat/fan cooling HP part number: 640425-001
  
  Here:
  HP part store: http://partsurfermobile.hp.com/?search=640425-001#
  
  http://www.Amazon.com/HP-640425-001-thermal-module-UMA/DP/B008H699RE
  
  http://m.Newegg.com/product/index?ItemNumber=9SIA3DY26Z2624
  
  http://m.eBay.ca/ITM/201268514399?_mwBanner=1
  
  Communicate directly with an online provider and confirm the specifications of number, part before buy you.
  
  Manual: http://h10032.www1.hp.com/ctg/Manual/c02842252 - Page 30
  
  Data sheet: http://support.hp.com/in-en/product/HP-Pavilion-dv6-Entertainment-Notebook-PC-series/5082212/model/5148859/document/c02888148/
  
  You have the AMD Phenom II model with UMA graphics system.
  
  Parts - list
  http://partsurfermobile.HP.com/?search=QG289UA#
  
  Concerning
  
  Visruth

• Control of heating/cooling (Peltier) in DC (not PWM)

  I am trying to set up a system to control heater / cooler Peltier element like this:

  +/-5V @ 1. 25A

  With the help of current continuous (through a PID controller), not a PWM.

  I am considering using CRIO or PXI platforms.

  -The CRIO, I found the motion controller 9505, but I'm not sure I can drive to DC.

  -On PXI system, I found this 4110 food, but it seems to be a (crazy) overkill solution for the problem.

  I could even include a small amplifier in the output of an AO module, but I wanted to avoid adding external elements to my solution of NOR.

  Can anyone advice me on the ebest way to do using CRIO?

  I'm sorry for the confusion. What you need for a stand-alone cRIO-system:

  1 cRIO chassis

  2 cRIO controller

  3. analog or a NOR-9505

  You can control the NI 9505 - by a PWM signal, you can't drive to a domain controller. If I look at your needs posted, I wouldn't use CompactRIO.

  You can use the PXI system. Then you will have an industrial pc with again a output analog credits in combination with an amplifier. If you want a clean system, it will be possible to use the programmable power supply. With the PXI-4110, you have the possibility to combine channels for voltage/current higher (up to 2 MPa). A problem can be speed, please consult the manual if the speed is applicable:

  http://www.NI.com/PDF/manuals/371635e.PDF

  If a system is not a problem, I will go for a compactDAQ, USB or PCI-solution.

  Kind regards Casper

• Radiator fan works in passive cooling of the political system (Thinkvantage Power Manager 3.62)

  Hi all.

  I have a model thinkpad T60 2008 and how it works on Windows 7. Everything was fine. Two weeks ago, I noticed that he would get a little warmer than usual. It was a year that I opened it, I decided to a maintenance operation. I used the manual and opened the computer laptop, gently removed the heat sink, use the air compressed to remove dust and reinstalled. I also put a drop of thermal paste on the processor peas for good measure. Put all back together and it runs a lot cooler.

  I usually use my laptop running on battery Maximum when unplugged, and for this I keep the political liabilities cooling system. My question is, the fan should run in this mode? Because since I fixed it, my heatsink fan is running in passive mode (never noticed before running in passive mode) and I think it is running my battery time past.

  Any ideas on how to solve this problem or if this is normal will be appreciated. Have a nice day together.

  -Ibrahim.

  In passive mode, the temperature threshold for what fan comes in is increased, then the fan would turn up to maximum speed only when it reaches a higher temperature. But the fan will always kick.

  When replace you the radiator, make sure that thermal paste is applied correctly, not too much just enough to get a thin layer on the CPU.

  http://Forum.NotebookReview.com/Lenovo-IBM/484577-ThinkPad-T61-thermal-paste-Guide.html

• Application of Satellite P200 heating/cooling

  Hi all

  I'm popping up this question because my P200 will soon be available at the end of its warranty, and I don't know if it is useful to do a repair for the next 'disease' or if, in fact, others have found a similar effect or knows that it is in the normal operating parameters.

  After execution of any fairly intensive program, just like one of my pieces from the analysis of the data from the software or game, for a period of time (for example, one hour), I noticed that the wind/radiator on the right near the hinges of the screen is very hot - uncomfortable to touch and to the point if it was warm I would be unable to touch at all. The base of the machine is also worrying hot. Anyone who has observed this, is it indicative of the early stages of an overheating problem and I expect the system looked at? I think that the computer can run a bit slower as I remember in a first time do, but I don't have any solid data to support that.

  Thanks a lot for the ideas and opinions!

  Michael.

  > After execution of any fairly intensive program, just like one of my pieces from the analysis of the data from the software or game, for a period of time (for example, one hour), I noticed that the wind/heater on the right side near the hinges of the screen is very hot

  I'll try to explain your problem.
  Fans and cooling modules are placed on the right side of the laptop.

  It is a laptop upscale. It was equipped with a high-performance CPU and graphics card. And it turns out that these devices produce a lot of heat when running with a maximum return.

  This leads to a temperature higher inside the laptop.
  The fans blow the hot air outside the laptop and so the right side is hotter than the left side.

  I have a question;
  Which driver of video card you are using?

  You should always use the Toshiba designed graphics drivers because these drivers support and protection against overheating. If the temperature of the GPU would rise to a higher level, then the graphics card driver would decrease performance GPU to make sure that the chip would not overheat. This protection is necessary because the graphics of mobile phones are not equipped with the huge cooling modules like graphics cards for desktop PC.

  Non-Toshiba driver graphics don t support this protection and this could lead to a higher temperature and overheating and finally, it could damage the GPU!

  So you should always use the Toshiba GPU drivers to prevent overheating of the equipment/laptop!

  Greetings mate

• Replacement Fan/Heatsink to cpu for p6-2330

  HP Pavilion Desktop P6-2330 with fan cpu Cooler Master (#FA08025M12PLA) caused "511 cpu fan not detected."  Fan radiator dead, still breathing.  HP bought April 2013 and under warranty.  Trying to avoid the hassle of the guarantee and the purchase/replacement of installation.  Unfortunately replacements no longer exist.  The Cooler Master fan was DC12, 0. 45A, 80X25M.  Cannot find anything for the game.  Big box and supply great online companies - duper fan may not happen what anyone close.

  Legitimate suggestions would be really useful.  Thank you

  I'm listening...

  IM-LISTENING wrote:

  HP Pavilion Desktop P6-2330 with fan cpu Cooler Master (#FA08025M12PLA) caused "511 cpu fan not detected."  Fan radiator dead, still breathing.  HP bought April 2013 and under warranty.  Trying to avoid the hassle of the guarantee and the purchase/replacement of installation.  Unfortunately replacements no longer exist.  The Cooler Master fan was DC12, 0. 45A, 80X25M.  Cannot find anything for the game.  Big box and supply great online companies - duper fan may not happen what anyone close.

  Legitimate suggestions would be really useful.  Thank you

  I'm listening...

  Hello

  You can use any fan that will fit the heatsink. Make sure that it cools pretty processors AMD warms up more those Intel a good cooling is necessary. You could also buy a full set with a heat sink which suits your FM2 socket like this: http://www.amazon.co.uk/Cooler-Master-Hyper-212-120mm/dp/B0068OI7T8/ref=sr_1_1?ie=UTF8&qid=1384032717&sr=8-1&keywords=hyper+212+cpu+cooler

  Just make sure that the case of Fund is large enough to hold the cooler in.

  http://www.eBay.co.UK/SCH/i.html?_trksid=p2050601.M570.L1313.TR0.TRC0.Xamd+CPU+fan&_nkw=AMD+CPU+fan&_sacat=0&_FROM=R40

• Satellite A210 - heating and BIOS update problem

  My aunt was having problems with his A210, so she bought herself a new and gave me the old one. The problems that she has been seen was the computer kept stopping at random. I think it's an overheating problem because the laptop runs quite hot. The BIOS has never been updated so I thought that might help with this problem. in any case, when I tried to update the BIOS this error message came.

  Cannot load the C:\Users\Dan\Desktop\MK10AWF\PHLASHNT driver. SYS.
  Please verify that your accounts, if you have no administrator privileges, please sign in again!
  Access is denied.
  Error code: 5

  I am the only user on the computer so I have administrator privileges and I don't know why this error is coming. Help, please. Thank you

  > Has anyone else experienced problems with the A210 of overheating? All solutions?
  Hi mate

  I m a Satellite A210 owner and to be honest, a higher internal temperature might occur if the laptop would not get enough air to cool the internal parts like CPU and GPU.
  A few weeks ago, I used the laptop on the sofa I don't the opinion of t that the cooling that are placed at the bottom of the unit fans were clogged because of my position relax, if you know what I mean ;)

  After a short period of use, the laptop shut down automatically I was a little surprised, but I realized that air could not circulate, and so the laptop overheated

  Now, I m using the unit only on the desktop. This method is recommended, and it helps to keep the temperature at the lower level

  PS: My BIOS is updated...

• Satellite M70-164: heating under Linux Ubuntu problem

  Hello

  I use Linux Ubuntu Edgy under my laptop and when I play UT2004 I got a rate of about 90fps, but after 10 minutes of play fps drastically drop to 15/20 fps!

  I noticed that the pleasure never operate at full speed on linux! and to check I suspended my laptop and ubuntu has a bug that when you turn on your computer again, the fan will always run at full speed, so I went with the fan at full speed play UT again for about 1 h 30 and the FPS does not let it go this time, so I concluded that it is a heating problem.

  I installed omnibook but my phoenix bios do not support the fans... under windows, I have no problem.

  What should I do? Thanks :)

  I have no problem with Edgy on U200, with games such as Sauerbraten.
  Fan is really speed up when necessary.

  Hope you will solve your problem.

• The fan runs with heat bad open case sensor?

  I have a HP Pavilion 670 y. I have a fan that works for long periods of time and then stops then starts again.  I decided to run my computer with the case open to make sure which fan was working before you buy a new power supply, if it is the fan.  Found that it was the lower cone. The fan has fewer stops and starts with the case open but still has periods where it runs for a few minutes and then stops and starts.  Since I was the case to open I don't see how the computer could be overhaeting.  Would it be a bad heat sensor?  If it's the heat sensor can be replaced or is it wired?

  I ended up realizing that there was still a lot of dust on the fan plugged into the motherboard.  I gave that a good cleaning and that solved the problem.

• Qosmio G10-133: cooling module - message problem

  I recently received a message saying that there is a problem with the cooling system. The fan was making a very rough sound, now it's very quiet. I guess I need a cooling Module? Can any Advisor of the part number, the best place to buy one, one about cost. Also, if my diagnosis is correct.

  See you soon

  Hello

  If you have received the message that there is something wrong with the cooling system so it seems that fans does not work properly and cannot cool the CPU.

  In this case, you must use the laptop because the processor and other parts can damage due to high temperature.
  In case you I recommend you contact Toshiba service partner in your country.
  Guys should check the laptop. You must explain the situation.
  In my opinion, the cooling module is not very expensive.

• Heating with G motorcycle problems

  I am facing heating problems with my motorcycle G... The phone becomes heat immediately using the WiFi also? Help me avoid this problem... I contacted the customer Service... They checked my phone and said that no hardware problem and they re installed OS too... But I am facing this problem... Help me