Control of process data HFM

Similar Questions

• HFM: Cannot lock entities due to the control of process state

  Hello

  I want to block some previous years, e.g. 2000-2010.

  In the settings of the metadata for the scenario property 'PhasedSubmissionStartYear' is defined in 2013.

  If I try to lock the 'old' years before 2013, an error has occurred: the processing unit can be locked, because his level of process is not "published".

  Why is that?

  So I need to go through all the necessary steps to control the process for all years?

  Thanks in advance!

  Hello. The short answer is Yes, you have to cross and promote annually to publish before locking (start, present and publish). The year of beginning of gradual submission to use presentations by steps (several approvals by period) only.

  A suggestion: lock only the entities of base level, not the parents. The parents of locking that will prevent the data change when the hierarchy is changed, but if you ever have a change which must be retroactive so all changes are applied in any case. Org by period is better functionality to keep the old hierarchies in place. Do not forget that the accounts of parent and parent's customs are calculated in memory so they do not get locked in place; just the entities.

  Eric

• How can I control the writing-data-to - spreadsheet.vi to save the data?

  Hi all

  I tried to draw a wave and save the data to excel. Now, I want to control the writing-data-to - spreadsheet.vi to save data when I want which means that the vi records nothing until I have send a command to it. How can I make this happen or do I need any other screws?

  Nicky

  Hello

  Maybe this wat you are trying to do... Let me know if it helps...

  Kind regards

  amine31

  (Kudos are always welcome)

• Install PT8.53 with Linux question: connection process Data Mover and application designer

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture.

  Server database is the database Oracle 11 GR 1 material.

  Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  
  I've been setting up of database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually by using starter PT853 Oracle database instance. I have run the following scripts:
  (1) utlspace.sql
  (2) dbowner.sql
  (3) ptddl.sql
  (4) psadmin.sql
  (5) psroles.sql
  (6) connect.sql

  
  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance.

  I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853
  Connection type: default database
  "TCP/IP Protocol".
  Host name: 192.168.196.102
  Port name: 1521

  Listener: LISTENER
  Protocol: TCP/IP
  Host: 192.168.196.102
  Port: 1521

  
  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same, and the connection is successful as well. Its details are as below:

  
  NET Service Name: PT853
  Protocol: TCP/IP
  The host of the database Machine name: 192.168.196.102
  Port number: 1521
  Name of the Basic Service: PT853
  Connection type: default database

  
  This means that Windows XP can connect to Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover and application designer cannot open a session in PT853 Instance of database in the Linux Server machine. Its details are below:

  Configuration manager:
  Type of database: Oracle
  The database name: PT853
  User ID: SYSADM
  Connect ID: people
  Connect password: people

  Data Mover:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  Application Designer:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  When connect Data Mover and application designer, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  According to my understanding, process connection Data Mover and the application designer requires 3 tables in SQL Server: PSOPRDEFN, PSACCESSPRFL, PSSTATUS. I'm not sure the process of connecting to the Oracle database. I checked the database PT853 instance in Linux, and there is only one table "PSDBOWNER" created by the scripts.

  My question is:

  Can any folk tell me the connection process Data Mover and Oracle database application designer? Requires only one table "PSDBOWNER"?

  Thank you.

  Oh my, many mistakes action here. If PSDBOWNER doesn't have a line, it must be solved at the time that the error came out. The replacement by SYSADM first why? Why is complaining already existing SYSADM? Most likely, you HAVE created manually, where you shouldn't.

  Again and again the same story. And again, sorry to say but you should take the basics of Linux training, Oracle training bases and sorry to be hard but reading training as well to read correctly the Peopletools Installation Guide where all required steps are really described in details.

  I don't think anyone can help you across the network in this respect,

  Nicolas.

• Conversion in failure "the reconfiguration of processing data store.

  I'm trying to convert a Windows XP SP3 machine that has one partition D:. When I try to convert, it fails to stage "Transformation of the reconfiguration data store" with an error indicating "FAILURE: unable to find the system volume, reconfiguration is not possible." I checked the boot.ini file and it seems to be ok, however when I run a Spotmau CD to try to make some recovery/survey to see what the problem is, it shows Windows is on C:, and in the conversion process step that says "Drive to update for the layout of the destination volume letters" goes and comes without error , so I guess that converter is changing the drive letter, that is all pipe up. Can I prevent converter to change the drive letter, or can I change afterwards?

  Thanks in advance for any help.

  xp is the easiest Converter 3.0.3

  that sets up work correctly

  with 4.3 you MUST order the buslogic controller

  Von meinem iPhone gesendet

  Am the 07.07.2011 um 22:19 wrote mmillington [email protected]<>[email protected]>:

  Http://communities.vmware.com/index.jspaVMware communities >

  Conversion in failure "the reconfiguration of processing data store.

  mmillingtonhttp://communities.vmware.com/people/mmillingtonresponse > converter - see complete discussion onhttp://communities.vmware.com/message/1786568#1786568

• The process of HFM management

  Question of management process:
  
  If a user makes the promotion of data at the local level and then later adjustments are made for it at a ministerial level (now faced by all units processing), can the local user then re - examine and promote? A thought is to give the user local status of supervisor to review to approve since Submit seems to end access to the level of the exam. This seems to be too much access to a local user well.
  
  Any thoughts?

  Jeo123,

  Thanks for the reply. I have implemented GLdata, LocalAdjs, and CorporateAdj members in a local instance of HFM.  These three members would be the children of AllCustomX (with rules for calculating data combined in this parent)?  Also, users then have a 4th Phase of submission for AllCustomX to promote, submit, etc. GLdata load over the Adjs?

• View or process data acquired by NI 5732

  Hi all

  I have a scanner high-speed NI 5732 works with NI SMU 7962R. I need to acquire data at high frequency and the process/view it online if possible. I think the problem is that the while loop in the high acceptance of the VI page is too slow to read the data sent by the FPGA. I can see clealy waveform when the input frequency is low, but when the frequency is high the ugly looks of waveform. Is there a way I can see the waveform clealy high frequency in real time? Or I can use somethig like a FIFO to store data and view it later?

  Thank you

  Tong

  Hi Jeff,

  Thank you for your answer and I've already found the solution by myself.

  I did the FPGA and host screws by myself according to the example of "Getting started". I use the internal clock of 80 MHz in the FPGA VI. I'm trying to use NI 5732 to acquire the signal with a frequency of several MHz, so I think that the acquisition rate is fast enough.

  I solved the problem by using a target-to-host FIFO. The maximum size of the FIFO seemed to be 32767, so I put this value. Also, host VI, I put the number of items to be read from the FIFO to 10000. So I can view the MHz signal at the host VI.

  Best,

  Tong

• How to use a chart control to enter data?

  I have a GUI that contains a chart control.  By making no use of events graphic I was able to add and remove a data point on my chart by clicking the chart control and then handle the event in the vi... no problem.  What I would really like to do now is to allow the user to choose a data point on the graph and drag it to a new location, providing an easy way for the user to define a given waveform... I'm stuck!

  I'm using LabVIEW 2009.

  Have you considered using the sliders to tide you over?

  The sliders can be moved so logically (in your code) combining the cursor to a data point, you can use the cursor to move the point.

  The cursor bonus feature is if you show that the legend of cursor the user can enter the values.

  Ben

• Dynamically aqcuired of process data

  Hello

  what I'm trying to do is: I want to read a signal from two channels for a period of 10 s e.g..

  Now during this Acquisition, I want to check every 100 or 200 ms if the signal is always 'correct', so, otherwise I'd be able to do something.

  I do not know how to handle this task, because on the one hand, in the end, I need the signal together and on the other hand, during the process, I need the 'chunks' of 100/200ms to check something.

  I tried to use a for loop (see downloaded pic) but I waste too much time at each iteration, because I have to add the signals, the entire signal has missing parts.

  I also need to get data on the loop after iteration of tannins, but which also does not seem possible.

  Someone has any other ideo how to approach this task?

  

  Hi Andy,.

  Please take a look at the example comes in the Finder of Labview example

  -> Input-output hardware-> DAQmx-> analog measurement-> power-> Cont Acq & chart voltage - Int Clk

  In this example, you acquire continuous data in blocks of 1000 values. Then you can check the values of every 1,000 if

  the data is always accurate. If not, you can stop the while loop for example.

  But you won't miss any data because the sample mode is "continuous" with a specified sampling rate.

  

• How to select the entity for the management of the process of HFM?

  Hi all

  I have a confusion as I know, a process allowing management to the statement my Scenerio metadata property. Now let's say I have an application with more than 800 members of the entity in the entity Dimension. Now that all entities will require to have process management, how can I decide?

  Help, please.

  Thank you

  Zitouni

  Hello. Once you enable for the scenario of all entities will require from, promotion, etc.. Process control screen allows you to apply patches to the selected entities and his descendants, so it is not difficult.

  Eric

• selection list loading using the ondemand/ajax process data

  Guys,

  Ive has a selection list that has a query default LOV (select jobname d, jobid r of the work) but now iam trying to create application processes to pass new values LOV (like select ename d, empno from emp by 1 r) replacing the previous lov when a button is clicked

  any idea please?

  Apex 4.2.x

  Kind regards

  Gor_Mahia wrote:

  fac586

  good idea to use the function in the pipeline, but I really want to use ondemand/ajax call here I don't mind spending extra energy so long as its feasible

  I never mentioned in pipeline functions.

  A dynamic LOV can be created as either a static SQL query:

  select ename l, empno v from emp order by 1
  

  or in the body of a function that returns a SQL query:

  declare
  
    lov_sql varchar2(4000);
  
  begin
  
    if :foo > :bar
    then
      lov_sql := 'select dname l, deptno v from dept order by 1'
    else
      lov_sql := 'select ename l, empno v from emp order by 1'
    end if;
  
    return lov_sql;
  
  end;
  

  This will allow you to create a dynamic data source for the LOV using some logic is required. LOV options can be modified using standard dynamic action of refreshment. There is no need to create an additional On demand process or write complex AJAX code. Use declarative when possible.

  "Less code is less than bugs. Seek ways to write less code. "- Tom Kyte

• Process of HFM

  Hello

  I have 2 requests of HFM, but I see 7 HsvDatasource.exe of the processes running on the server. Can you tell me why is the differences.

  Appreciate your answer...

  Hello

  You can see the hsveventlog.log for the application name for which the hsvdatasoure.exe is created. In order to verify that it points to any other application different EPS.

  Kind regards

  Abdul

• Problem loading data HFM

  Hi all

  We had a request for EPMA Type HFM sizes have been local, validated and successfully deployed application.

  We tried to load data into the application of HFM and loading the data has been a success.

  Then, we decided to convert all the local dimension of the HFM application mentioned above as shared dimensions. After the conversion of all of the dimensions dimension shared with success that we get the error when loading data in the same application of HFM (the app is valid and can be deployed after a change)

  The error log is below:

  Load data started: 29/11/2014-10:53:15.

  Line: 216, error: cell invalid for the period Oct.

  REAL; 2014; Oct; FOR A YEAR; E_2100; < entity currency >; 89920000; [ICP no]; CORP.; [None]; [None]; FARM21000; 11979

  > > > > > >

  Line: 217, error: cell invalid for the period Nov.

  REAL; 2014; Nov; FOR A YEAR; E_2100; < entity currency >; 89920000; [ICP no]; CORP.; [None]; [None]; FARM21000; 23544

  > > > > > >

  Online: 218, error: invalid cell for the period dec.

  REAL; 2014; Dec; FOR A YEAR; E_2100; < entity currency >; 89920000; [ICP no]; CORP.; [None]; [None]; FARM21000; 58709

  > > > > > >

  Line: 219, error: cell invalid for the period Oct.

  REAL; 2014; Oct; FOR A YEAR; E_2100; < entity currency >; 28050000; E_6000_20; [None]; [None]; [None]; FARM21000;-11979

  > > > > > >

  Line: 220, error: cell invalid for the period Nov.

  REAL; 2014; Nov; FOR A YEAR; E_2100; < entity currency >; 28050000; E_6000_20; [None]; [None]; [None]; FARM21000;-11565

  > > > > > >

  Wanted to know if there is something I might have missed if conversion of local dimension in sharing (if there is any sequence to do, or no constraint that I am not aware, although the conversion looks good, as demand is validated and deployed after changes)

  What can be the reason for missed data load, can anyone help?

  
  

  Thank you

  Rachid
  

  Hello

  I could watch the properties of account for this account (89920000) and see the TopCustom1... 4Member. you will find the reason behind the invalid cells.

  When you convert the local shared dimensions, have you checked the "Dimension Association' accounts and society?

  He does not lose the dimension association if a proper sequence is not respected.

  Kind regards

  S

• Complex input for the control of ws data parameter

  Hello

  If I have a web service-based data control and exposed in the web service method accepts an array of custom as an input parameter objects, how can I set the value of the input parameter.

  In this link http://susanduncan.blogspot.com/2006/09/dealing-with-complex-input-params-in.html , we create a table 'Goods' (custom type), but here we use a proxy and the class of 'Élément' is generated by JDev.

  How can we do it if we were using a web service data command instead? (The "Item" class will not be generated)

  Thank you

  Elias;

  You can not. You must use a proxy for this.

  Timo

• Detail table data control not insert data

  Hello

  I use JDev 11.1.2.4 and fusion web application, I have 2 main table and, when I run APP module and insert data in the table in detail its registered successfully, but when I drag the VO of the data control to af:form some data and other will be null.

  Any suggestion?

  Concerning

  Finally I found the solution

  https://forums.Oracle.com/message/10493807