R6400 - what cable?

Similar Questions

• What cable to target display Thunderbolt to MiniDP?

  Hello

  I decided to update my current iMac, which is 7 years old and grow a bit in the given technology is usb 2 and other things.

  There is one thing that I am trying to understand even after looking at apple's site I'm not sure the cable I need.

  If the current Mac mini display port and I want to be able to use it as a secondary to my new monitor when it comes. My account I need a mini display to thunderbolt cable port?.  However, I am not able to find one of these cable types, where the reason I could think wrongly.

  Then... basically should what cable I go Thunder to Mini display port? Is this just a thunder storm? as they both seem to have the same type of connector. ?

  Thanking you

  A Mini DisplayPort to Mini DisplayPort cable.

  (141390)

• Should what cable I connect a Libretto U100-105 to a LCD TV?

  Should what cable I connect a Libretto U100-105 to a LCD TV?
  The pc has an external monitor port, but I can't tell what kind of connector, it is, since I have never seen one like this.
  Thank you

  Hello

  It all depends on the available ports.
  To my knowledge the U100 supports a Mini VGA Port and an adapter was supplied with the laptop.
  http://en.Wikipedia.org/wiki/Mini-VGA

  In your case I am looking for a cable that is capable of connecting a mini VGA port with a port VGA (RGB) common, which is probably available on your TV

• The envy of 860st Costco: what cables do I need to add another internal HARD drive

  The Tower has a single SSD and the physics for additional disks.  Should what cables I install a disk 3,5 '' HARD?

  Make sure you that there is a power dongle extra sata that comes from the power supply, if you do everything that you need is a Sata hard drive cable that can be purchased anywhere.

  http://www.MonoPrice.com/product?P_ID=8775

• Should what cable I connect Satellite L350-170 on my TV?

  I have a simple question... What cable should I connect and view my Satellite L350-170 on my TV?

  Hello

  How to check the manual?

  As much as I know L350-170 does not support the TV out port.
  It does not support HDMI as well.

  So that it supports only a VGA port.
  If your TV supports a VGA port (some LCD this) then you can use and VGA cable

• Equium M50: Can what cable I use to connect to the TV?

  I want to connect my computer to my TV. I went to my local computer store, but they showed me about 5 different cables and I had no idea which one would be better or work at all. Can anyone advise me on what cable would work for my computer the Equium M50-192? Or I can even buy such a cable online?

  Thanks in advance.

  Hello

  I think that you need a cable 4pol usual s-video mini-DIN.
  This should be consistent and should work fine.

• Can I string my new imac to 2015 to my imac 2007. What cable should I use (read: I'm illiterate cable).

  Can I string my new iMac to 2015 to my iMac 2007. What cable should I use (read: I'm illiterate cable).

  Hi, Daisy Chain in what way, exactly, do you mean so the iMac 2007 may be in target disk Mode so the newest can use its drive?

  If so, you need a lightning to Firewire adapter...

  http://www.Apple.com/shop/product/MD464LL/A/Apple-Thunderbolt-to-FireWire-ADAPTE r

  And a FW/800<->FW800 cable...

  http://eShop.MacSales.com/item/NewerTech/1394B99036/

• Should what cable I use to connect a hdmi monitor to a macbook pro?

  I want to connect a 2011 macbook pro to a lg 22m47vq monitor. Have the choice of hdmi or dvi - d, but what cable do you advise me to connect to the macbook pro?

  Thank you

  A mini displayport > HDMI adopter will offer audio too but sometimes a HDMI connection does not get good output video.

  Better for the video's mini displayport > DVI adopter.

  Curs mini displayport in Thunderbolt of the Mac port

• HP Color Laser Printer 4 p: What cable do I connect my HP printer laser 4 p to my home network router

  Should what cable I plug my HP laser printer 4 p to the USB port on the router for my home network. My printer is already connected to my desktop running Windows XP.

  You cannot use usb period.  I said that above.  You will need to the jetdirect 300 x or another external jet parallel to connect to your router using an ethernet cable.  Once logged in simply look for instructions on the net print a configuration page and the use of the information in the config page to add the printer.  You can ask a friend who is computer savy.

• Should what cable I plug my old HDD (Inspiron 6000) to a USB port?

  My old laptop (Inspiron 6000) showed some blue screens and developed a flaw in the boot sector...

  Should what cable I access it as an external drive connected to a USB port?

  Any help would be appreciated - I need to get my data!

  Thank you

  MrRagno

  
  

• Should what cable I plug my Satellite P200-155 to a TV?

  For a while thinking about it but I don't know which cable is that I need? Thanks for the help!

  According to specification for laptop, your laptop has a S-video port, so what you need is S-video cable.
  Of course, it also depends on your TV.
  Your TV has S-video port too?

• Qosmio G20-102 TV TUNER: how to get this to work - what cables are required?

  Hey everybody,

  I just installed vista on my laptop QOSMIO G20-102 (PQG20), I have media library now.
  My laptop came not like MEDIA CENTER EDITION, it came under the home edition of Windows XP (laptop purchased in July 2005).
  I got 3 cables which I have no idea how to use...
  laptop was purchased in Dubai/Emirates and I live in Malta

  These are the cables >
  http://img399.imageshack.us/img399/7189/dsc00780gi6.jpg

  Now for my question (s):
  1 which of these cables do I need? Im just trying to figure out how to get my satellite tv or digital cable to work on my laptop.
  2 antenna adapter (see picture) is not for coaxial cable, what can I do?
  3 I did WINDVR more due to the upgrade of vista, Media Center Gets the job done but I don't know what to do... This guide has confused me even more > http://www.microsoft.com/windowsxp/mediacenter/using/setup/settop.mspx
  I don't have IR control cable, I do not have a remote sensor (but I have some sort of built in the remote sensor on the front of my laptop.

  I'm looking for advice as for example buy this, get rid of it, install this etc...
  Please, anything that can help is appreciated!
  If you need information more just ask, I am here ;)

  Yours sincerely
  Ishmael

  Hi ismael,.
  I'll try to help with that, but it's a long way to the road...
  I don't know what Tv system is used to Malta (Pal)?

  The best way to set up your TV's with Media Center 2005 edition.
  Cables:
  Check the back of your cable TV installation box and find the composite or SVHS output. If you have only the composite, you can use the composite cable of the posted image. If your TV decoder has the SVHS, so you should use, to the better image than composite. You must obtain a SVHS cable for this.
  Look for the audio output rca, too. Mix with the composite cable for the audio Qosmio.

  But you must have:
  1 control cable IR, for media center 2005 configuration as well as your TV decoder. It is cable connected to the remote sensor (see fact sheet on the back).

  2 sensor for your remote control and configure it with the remote control of your TV decoder. In this way, you can control the receiver cable channels, using the remote control for your Qosmio G20 media center edition.
  Recovery: you can change the channels on your TV decoder using the qosmio remote control.

  3. remote control for you media Center 2005, one that came with your Qosmio g20.

  Open the TV on Media Center 2005 configuration and follow all the steps required for installation.
  You must follow the guide, as is explained in the image you posted:
  http://www.Microsoft.com/windowsxp/mediacenter/using/Setup/SetTop.mspx

  If you have all these cables, you can use the Qosmio player to watch TV. It is not tied to windows OS.
  Here, simply connect the coaxial cable and let the Qosmio player search for available channels in your area. Qosmio player has the opportunity to set the colour TV system in any part of the world. all NTSC regions in all PAL regions.
  If you have the remote control for your Qosmio, TV keys will work directly with the Qosmio remote sensor on board, without needing the external sensor of Microsoft.

  I hope this helps you
  Francisco

• What cable should I connect Satellite C660 - 1 K 9 TV equipment?

  Hey guys!

  I basically just need to know what kind of cable I need to connect my laptop to my TV.
  I have a laptop Toshiba Satellite C660 - 1 k 9 and my tv is make sure you Samsun.

  Thank you!

  According to specification for laptop, your laptop has placed in the video output on the left side port port VGA 15 pins. Using this laptop port can send the video signal to external device. Please note that it is for the video signal only.

  It is not the best option to connect to your laptop to the TV but there is no other choice. Check please if your TV is such port in the back.
  If Yes, you need a VGA cable for the connection.

• Should what cable I use to sync my mac pro to my iMac book

  W hat cable should I use to sync my mac pro to my iMac book

  In order to offer you the best answer, please provide more information on what you're trying to do.

• 6B55DX dv7: what cabling needed to connect the second HD

  I would like to add a 2nd hard drive, but although there is an empty Bay, there is no wiring.  My questions:

  1. What are the numbers of the part for the wiring needed?
  2. Are there other necessary parts such as clamps, cages, etc. ?
  3. Where can I get these parts?
  4. Is there anything else I need to know on the subject of bringing the HD after installation?

  I intend using the extra drive for extra storage; I won't start him.

  This is the cable you need:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=379

  The dv7-6000 series was supposed to be supplied with the box hard drive, but no cable or screw. If you do not have the caddy (also called sled or cage) then you will need to find one of those too

  http://www.eBay.com/ITM/665597-001-genuine-original-HP-hard-drive-caddy-second-dv7-6c-series-/291671518946?hash=item43e8fa2ee2:g:dkAAAOSwGotWqUHQ

  You do this right. A hard drive in secondary Bay can be initiated, but makes a great place for additional storage capacity.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.