Control of VCS - H460 and punishment should be active?

Similar Questions

• VCS-control Mobile Remote Access and 7800/8800, DX, MX security profiles

  All,

  First thanks for your help.

  I am in the process of implementing a new pair of VCS - C/E and want to configure it to use remote devices on arm I have read the documentation and just have a few questions before ordering my new SSL for the VCS - C certificate.

  We chose to use the devices DX70, DX80, DX650, 8851,8841, use of the ARM. According to the documentation, I am to create a new security profile for each device and name them as full domain names

  DX650.subdomain.mydomain.com

  DX80.subdomain.mydomain.com

  DX70.subdomain.mydomain.com

  8851.subdomain.mydomain.com

  OK, here are my questions...

  1. subdomain.mydomain.com - is the name of my VCS Expressway. For example: vcsexpressway.mybusiness.com? so the entire FQDN

  DX650.vcsexpressway.mybusiness.com?

  2 when I create profiles course should I create one for each model? 8851, 8841, DX80...? Or can I just create one for the series? 8800, 7800?

  Thanks for your help!

  1. it is recommended to include the business control domain VCS in the security profile name phone on CUCM. If your VCS control FULL domain name is vcscontrol.mybusiness.com then you can use DX650.vcscontrol.mybusiness.com in the safety profile of the phone. These names must be present in the list of other names are the subject of the control of the VCS server certificate.

  2. you can create separate security phone profiles for each model.

• Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

  Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

  Hello

  The following steps may help:

  • Restart your iPhone and your watch, both turn off together, and then restart your iPhone first:
    • Restart your iPhone, iPad or iPod touch - Apple Support
    • Restart your Apple Watch - Apple Support
  • Disable the twinning and re - pair your watch:
    • The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
    • Set up your Apple Watch - Apple Support

• Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices with my Apple TV remote and SIRI HomeKit!

  Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices of HomeKit with my SIRI voice remote control and using Apple TV!

  If the new apple TV can act as a concentrator HomeKit and I use SIRI on my iPhone to control my locks, thermostat, lights, etc. Why am I not able to do the same thing with SIRI via voice commands on my Apple TV remote? When is this going to work?

  Also, when Apple will come out with a response to the echo of Amazon? I've tired to wait... do it already! If you build it, they will come...

  Thank you!

  This is a community to a user, and Apple will not see your rant. If you have suggestions about Apple TV, Siri and HomeKit the best thing to do is to submit your comments here. http://www.Apple.com/feedback/AppleTV.html

• VCS ExpressWay and control over the different Versions

  Hello world

  Can be used on a newer VCS Highway then control VCS?

  Currently we have a highway of VCS and a tester of VCS X6.1 running. I plan to upgrade to X7.2.1 and will temporarily have the South, the new version with the old version running control.

  I don't see any documentation that may not be completed. Especially since X7.2.1 had interop tests already performed with X6.x.

  Mark

  Hi Mark,

  Please check the following page 8, section "Prerequisites", document

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Basic_Configuration_Control_with_Expressway_Deployment_Guide_X7-2.PDF

  Prerequisites

  Before you begin the configuration of the system, make sure that you have access to:

  -Guide the administrator of VCS and VCS Getting Started Guide (for reference purposes)

  -control of VCS running the version X 5 or later

  -a PC connected by Ethernet to a local network that allows to route HTTP (S) traffic to the VCS

  -a web browser runs on the PC

  -a serial interface on the PC and the cable (if the initial configuration must be performed on the interface series)

  Answer to your question, there is no problem if VCSE and VCSC installed on versions of different software.

• TMS server and control the VCS

  Hello

  We have a customer's request if they can change the usename (admin) of control VCS in the TMS server. They don't want to purge the VCS of TMS server control, because they still need all the TMS Server historical reports. Basiaclly, they won't use the username: admin more to managing TMS server. They can create another account in the control of VCS with admnin rights, but how they change in the SMT server without purge from the TMS server.

  In the server of TMS, the VCS control connections tab, there is a place to change the password. but no place the username change.

  TMS software version: 13.1.2

  VCS Control version: 7.0.1

  Note: I noticed that this option is available on the server SMT version 14.2.

  Thank you

  Kind regards

  Chris

  Hello

  Using a different name that 'admin' to manage the VCS was introduced in TMS 14.1 (CSCuc88048). Not even bleed and add will help them, I'm afraid!

  Your client is upgraded if they want to use a different user name.

  Kind regards

  Kjetil

• VCS-Express and the integration of control VCS

  Hello

  I have the following question on the integration between VCS and VCS Express behind NAT devices.

  Control of VCS in the configuration of the area customer I will use the (Real) Global IP address location > Peer Address or I have to use the private IP address.

  Thank you

  Hello

  It depends on the interface how you have connected on the highway. So if you have two connected interfaces then the internal one is configured with a private address, and that you would use on the control to send traffic to. But to your question, I assume you have a connected only interface so you can use the public ip address for sent traffic of venture capital control.

  Ask if you need more information.

  Best regards / / Andrey

• I want desperately to upgrade Firefox to version 10 of version 9, but whenever I try, I'm stuck with FF10 control addons for comparability and opening the homepage whenever I starts the browser.

  Windows 7 64 bit
  I want desperately to upgrade Firefox to version 10 of version 9, but whenever I try, I'm stuck with FF10 control addons for compatibility and opening the homepage whenever I starts the browser. I keep having to go back to version 9 to solve this problem.

  Sorry to be a while back! It tried unsuccessfully so this AM, gritted my teeth and deleted the FF programs folder and downloaded and installed FF 10.01. He was still struggling with the same problem. Went in the appdata folder and two files sessionstore.js there. Delete both, restarted the browser and no verification of the compatibility of the modules was done at first upward and the additional tab for welcome to FF was the opening is no longer all seems to work as it should and I did not lose any of my settings... Thanks for trying to help, and I hope that my solution helps someone else who could this experience in the future. Hoping that the next update will smoother!

• Reset computer to factory settings, installed SP1 and lost control of the keyboard and the mouse. Had to do system restore just before the installation of SP1.

  Original title: help

  OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4

  Hi MartyFenwick,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the brand and model of the mouse and keyboard?

  3. you receive an error code or message?

  4. is everything works well after running system restore?

  5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?

  6. what happens when you try to play music CDs?

  7. what program you use to play the CD?

  Please follow the methods and mark the question below:

  Before you install SP1, follow the method 1 and 2.

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  I suggest you disable the antivirus for temporarily until the installation of SP 1.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Follow the steps in the link for problems with the keyboard and the mouse below.

   
  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 4:

  Follow the steps in the link below.

  Learn how to install Windows Vista Service Pack 1 (SP1):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I hope that the information above helps you.

• My Windows 7 computer has office in the Temp folder! It is wrong and what should I do?

  I had a hard drive because of all the files copied several times (a virus) crash? Restored the my documents, my music and my image folders to the new hard drive of the computer and manually delete the duplicate files.

  New computer works fine but I noticed the structure will computer > disc Local (c) > users > temp > and then Temp are all folders like desktop, downloads, My Documents, my music, etc..

  

  Is this normal, should I do something? I also have a folder named Temp in the Windows folder, which seems more the usual thing...

  Thank you!

  I'm afraid the old drive crashed due to a virus and is perhaps still LURKING in the new hard drive somehow.

  It seems that if the 'Temp' folder is the folder of the user profile of the account named "Temp". Open (Control Panel) user accounts and check if there is a username called "Temp". If so, do not delete this folder.

  Or, click Start, type cmd /k net users (press ENTER) to see the list of user accounts in the system.

• How can I restrict permissions to users selected features like control panel, run, format and other administrative functions?

  Windows 7 Pro, how can I restrict permissions to users selected to features such as Control Panel, run, format and other administrative functions?

  Hello

  You should be able to control it for all users, users or groups or all users
  except the administrator.

  Settings for group policy to control panel
  http://TechNet.Microsoft.com/en-us/library/ee617167 (WS.10) .aspx

  Policy settings for display in the Panel group
  http://TechNet.Microsoft.com/en-us/library/ee617168 (WS.10) .aspx

  How to enable or disable the control panel in Vista and Windows 7 - see two Option
  http://www.Vistax64.com/tutorials/121043-Control-Panel-enable-disable.html

  How to hide or display a Control Panel icon in Vista and Windows 7 - see an Option
  http://www.Vistax64.com/tutorials/120937-Control-Panel-hide-icon.html

  How to disable the control panel in Windows 7
  http://www.howtogeek.com/HOWTO/16189/configure-what-items-are-available-in-Control-Panel-or-completely-disable-it-in-Windows-7/

  Enable/disable the Windows 7 control panel access
  http://www.AddictiveTips.com/Windows-tips/disable-enable-access-to-Windows-7-Control-Panel/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• MX200 (TC6.2) cannot save with SIP TLS for control of VCS

  Hi all

  I just got a brand-new MX200 in our laboratories.

  We will evaluate at the moment the overall upgrade to the version sw TC6.2.

  The MX200 was delivered with TC6.1.1.7. Check in the control of VCS with SIP TLS works without any problem at all.

  VCS - C eventlog:

  "26 aout 14:16: 47 tvcs: event ="Accepted for registration"Service ="SIP"Src - ip ="172.18.93.88"Src-port ="5061"Protocol ="TLS"AOR ="[email protected] / * /"Contact =" sip:[email protected]/ * /: 5061; transport\ = tls"duration ="60"Level = '1' elements UTCTime = '2013-08-26 14:16:47, 833'

  "26 aout 14:16: 47 tvcs: event ="The requested record"Service ="SIP"Src - ip ="172.18.93.88"Src-port ="5061"Protocol ="TLS"AOR ="[email protected] / * /"Contact =" sip:[email protected]/ * /: 5061; transport\ = tls"duration ="60"Level = '1' elements UTCTime = '2013-08-26 14:16:47, 831'

  After registration TC6.2 update fails.

  The 26 aout 14:36: 26 tvcs: event = "Rejected registration" reason = "Received no authenticated source" Service = "SIP" Src - ip = "172.18.93.88" Src-port = "36545" Protocol = "TLS" AOR = "sip:DOMAIN.com" Contact ="<>[email protected]"/ * /: 5061;transport\=tls>;+sip.instance\= '"" duration = '3600' level = '1' elements UTCTime = "2013-08-26 14:36:26, 481"

  26 aout 14:36: 26 tvcs: event = "The requested record" Service = "SIP" Src - ip = "172.18.93.88" Src-port = "36545" Protocol = "TLS" AOR = "sip:DOMAIN.com" Contact ="<>[email protected]"/ * /: 5061;transport\=tls>;+sip.instance\= '"" duration = '3600' level = '1' elements UTCTime = "2013-08-26 14:36:26, 481"

  As far as I can see there's something doesn't quite work with the protocoll in relationship with the SIP URI (AOR). Miss me the prefix "[email protected] / * /"

  All other systems (profile, ex, sx) work properly with TC6.2.

  Anyone have an idea?

  Hi adil,.

  Since the inscription "AOR" is only said AOR = "sip:DOMAIN.com"

  I belive you must have some sort of rule research on the VCS the sip domain and pointing to the crossing or a nearby area and the policy setting must be "audit powers.

  and since there is no name of user and password available the record attempts will fail with the message "from source" unauthenticated

  did you recently create transformations on the VCS? also, check your configuration of endpoint.

  You can create a rule to send this registration through local area message passing in turn to the subzone to registration. Please note the subfield must be set on "treat as authenticated" If you do not use authentication.

  Rgds

  Alok

• VCS - C and VCS-E switch to x8.7

  Hi, I plan on upgrading to VCS version x8.7 (of x8.2) to meet the needs of encryption for a RMC-cloud deployment and looking for some feedback from the community on a number of things:

  -I shouldn't need a key to unlock because the upgrade is the same version, correct?

  -J' need to upgrade the VCS - C and VCS - E with the same version of software, correct?

  N ' needs nothing to do away with the MCU? We are currently at version 4.5 software (1.45).

  Thanks for your help,

  Brad

  Release keys are only required if the major software version changes, minor changes for example, ranging from X8.2 to X8.7 does not require a key to unlocking.

  VCS - C and E must be on the same version, the only time where they should be on separate versions is when software updates.

  Nothing should be changed from the MCU.

• Problems with VCS - C, VCS - E and TMS

  I hope someone can help me because I nearly pulled my hair with this problem.

  We have a VCS - C and VCS-E the two X7.2 running.  Our TMS runs 13.2.1.  We used it for several months with the 'transfer', which worked well.  Recently, I am currently having of Movi/Jabber clients authenticate via LDAP/AD, in addition to using local accounts (we have some vendors and partners who register through our infrastructure).

  I have gone through all the documentation and think I have it configured correctly, however, things work behind what I need them for.  Currently, a client who is on our internal network can sign up by using the credentials of the AD, but may NOT use local credentials.  Customers who are outside our network can register using the information of local identification, but NOT using their AD information.

  My configuration on the devices of VCS is:

  VCS - C

  Credentials of the default TextBox control

  Course credentials Check box

  By default, subarea treat as authenticated

  VCS-E

  Course credentials Check box

  SIP Proxy record tried Off and known Proxy Proxy at all.  Currently set to Off

  What I'm missing here as I'm more on the side things CTS and just try to learn the VCS Cisco Tandberg product?

  Thank you

  Allen

  Allen,

  When you enable the NTLM protocol challenges on your VCS - C, this means that only NTLM authentication will be used for devices that support NTLM, namely Movi 4.2 and later, video Jabber 4.3 and more more Jabber for iPad. Other devices that do not support NTLM authentication will use either the local database or LDAP authentication, depending on what you have set up on your VCS.

  Is there a particular reason why you want to use Digest authentication and NTLM for video devices Jabber?

  -Andreas

• How do I know what programs and services should automatically go to start

  Original title: System configuration

  How can I find out what programs and services should automatically run at startup please help im running almost everything

  Hello

  You can use these to control which startup programs. Many others who settle start-up are not
  really need to be there. As Acrobat Reader (Adobe), Agent of WinAmp and many others who
  load chunks of themselves to start more quickly (not a problem on the machines of today ' hui) and to make sure that they
  can control the files they support (to be sure that you continue to use only). Those who are not common
  examples and not meant as a slam on fine programs.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  -------------------------------------------------------------------------

  Performance and maintenance tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.