Control Panel shows the wrong language

Similar Questions

• Windows xp professional sp3 general system control panel displays the wrong amount of system memory

  Have a Dell Optiplex GX280 running Windows XP Pro SP3 with 3.5 GB of memory. BIOS confirms the good memory installed, but the control panel > system > general tab displays only 2.99 GB of memory.  Is there a fix for this issue or Windows using only the first 3 GB of memory?

  If you have Windows XP with service pack 3 - it's a 32-bit operating system.  The most he could use is 4 GB and some of which will be used for overhead costs.  The most I've seen Windows XP with SP3 report was 3.85 GB of memory - although it is more common to see a 3.25 and 3.5 GB.

  Memory shared (with a video device) can also take off the total.  It's usually anywhere from 64 MB to 1 GB if the video device uses the system memory compared to (or in coordination with) committed memory.

  With Windows XP, however, have probably seldom got you much above 1.5 GB of memory space used without some graphics intense or video edition GOLD of virtual machines.  ;-)

  Essentially - there is unlikely to be anything to fix.  If you want to use/manage better memory, you need a 64-bit operating system (I'm not implying Windows XP 64-bit) and possibly a new video device.

• My photosmart hp 6510 shows the wrong language on the lcd display. How can I change to English

  How can I change the language on the LCD in my photosmart 6510 to the English

  Hello

  Please select the setup (rinch icon) button on the upper right, select Preferences (last option), select a language (first Option), scroll down and select English.

• My control panel shows only one user, but when I start it shows two users on the logon screen. and I know no other password

  My control panel shows only one user, but when I start it shows two users on the logon screen. My user is an administrator. But I do not know password of another user. I am currently using as an administrator. But I also want other user password. Answer please

  Your machine has only two accounts: admin and guest. I saw a few messages before which the poster makes an additional account on the log on screen that does not exist. Since there is not, it cannot be used.

  Also note that you play a game at high risk, having only one administrator account. This forum deals daily with posters including one and only the admin account went bad for one reason or other. Something about it now while you can: create, test, and document a spare, even admin account that you have a spare emergency House key.

• Control Panel shows that 4 GB of RAM, but product specs say I should have 8GB

  My HP Pavilion Elite HPE-250f desktop computer is supposed to get 8 GB of the RAM factory installed, but the control panel shows only 4 GB. When I run the diagnostic with the Support Assistant software it says that everything is working well, but also shows that 4 GB of RAM. I've had the computer for several months and the warranty just expired. In the past, I noticed it says 4 GB and thought that I should have bought a computer with only 4 GB, but it has always seemed strange to me. I looked towards the top of the record online and it says the HPE-250f has of 8 GB, and it also says 8 GB on the box in which it came. I didn't do any changes to the computer and never open the Cabinet. I hesitate to open the cupboard, but do not feel I should have to pay a lot of money to understand this.

  HP Pavilion Elite HPE-250f

  Windows 7 Home Premium 64-bit

  It took me a few tries - and months of frustration - but I solved the problem by carefully removing the memory cards, clean gently slots and cards and firmly the resettlement of the cards. It's been several months now, but the memory has been resolved. I had serious problems, as it is stated in this thread, with a catastrophic failure of the graphics card and HARD disk failure. I read on several posts that this particular graphics card was problematic, so I've upgraded to a Radeon HD 7700 series. I got the Core edition, which has 2 GB of memory defect to 1 GB. No problem since.

  In case of hard drive failure, it was a disaster! I replaced the HARD drive of 1 TB with a 512 GB SSD, but it kept the infection by a rootkit that I couldn't clean up. I tried cleaners virus and rootkit of several software companies with no joy. Not even the first products like Kaspersky, McAfee, Sophos, BitDefender and other companies. I reformatted the drive several times, but the hook came back in return. Finally, I brought the computer to a friend who is a computer SCIENCE professional. The rootkit probably lies in the commercial cloning software (Acronis True Image HD) that came with the SSD, it said. We loaded the operating system without using Acronis and have not had any problems since! I've also installed a WD Blue 1 TB HDD and rebuilt directories so that all libraries (Documents, photos, videos, etc.) are on the disk hard while the system is installed on the solid state drive. The upgrades were worth every penny! Now, my desktop HP 5 years computer works very well and the performance is very good even by today's standards. Boot times are much faster, too.

• How to place the Control Panel on the desktop?

  Is it possible to place the Control Panel on the desktop in Windows XP SP3?

  Hello

  • Open my computer
  • If the Panel is not visible, go to Tools – Folder Options, click the view tab and select (tick) the check box show the control panel in my computer (you need to scroll down), and then click OK
  • In my computer, right-click to control panel, click on create a shortcut and click Yes to the question resulting

  Tricky

• Firefox does support java applets if the "next generation plugin" is disabled via the control panel of the Java plugin.

  I'm still trying to get a definitive answer to this question.
  My applet is not 'Next Generation in line'. When we run our applet in Internet Explorer, it works very well as long as we disable the "next generation Plugin" via the Java plug-in Control Panel. However our applet does not work in Firefox if the cmdlet-the next generation"is disabled.

  It is a requirement that is I want to run an applet in Firefox 3.6.x or higher that the "next generation plugin" be activated via the control panel of the Java plugin.

  The current versions of Firefox (3.6 or later version) can only run Java applets through the next generation plugin.

  • http://Java.com/en/download/help/new_plugin.XML

• Why my iPhone showing the wrong time zone?

  Why my iPhone showing the wrong time zone when it is set to automatic? When I put it manually, it is fine. Is this a bug in the iOS 9?

  Try to activate your iPhone location service before

• take the cos(pi/2) shows the wrong result in swift

  take the cos(pi/2) shows the wrong result in swift but when I take the sin(pi/2) it shows the correct result.

  I'm messing around with math to swift before that I use it in my application but I'm having a problem to calculate the correct results with cos at 90 degrees, pi/2 radians and 270 degrees, 3Pi/2 radians.

  the results I get for cos(pi/2) are 6.123233995736766e - 17 when I know that it must be equal to zero...

  the same thing happens as well with the seizure of the sin (pi), sin (0), the sin (2 pi) and so on.

  6th-17 is zero! After all, you didn't feed it pi, but an approximation.

  Welcome to floating point!

  "The floating-point operations is like moving a lot of sand. "Whenever you move one you lose a bit of sand and pick up a little dirt".

  Kernigham and Plauger

• HP Officejet 4630e all in one: the time on my printer display shows the wrong time

  The clock on the display shows the wrong time.  Does anyone know how to rectify this please.

  Hello

  The date and time settings would cause problems of synchronization with Eprint if incorrect. The date and time should be accessible from the Preferences menu.

  Try this

  Power reset

  1. Without putting off the product, disconnect the power cord from the back of the product.
  2. Wait 30 seconds and then plug the power cord into the back of the product.
  3. If the product is not already on, press the power button to turn it on.

  Now, try to change the date and time and check.

  Where this fails, try this

  Setup > tools > restore defaults

  Try to set the date and time of return

  NOTE: This will remove network also settings so you need to redo the configuration of the network

  Measures to restore the network configuration

  http://support.HP.com/us-en/document/c03834108

  Although I am an employee of HP, I speak for myself and not for HP.

  Click on the thumb BRAVO upwards on the left to say 'thank you '.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• I was clear something in Add/Remove Programs, that my laptop go on restart, and after the disappearance of this button wiraless. I can't find it in the Control Panel, on the toolbar... How do I return it?

  Wireless

  I was clear something in Add/Remove Programs, that my laptop go on restart, and after the disappearance of this button wiraless. I can't find it in the Control Panel, on the toolbar... How do I return it? Sorry for the bad English.

  Hi Zeljka Djordjevic,

  ·         What program did you delete?

  I suggest to perform a restore of the system and check if the problem persists.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• Lost control panel in the start menu

  I get this message cancelled because of the restriction, see administrator? Control Panel is to fly on the other set ups. and now my pc not stop I have to turn off the main power to stop. Thank you

  Hey BROOKS,.

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  3. what happens when you try to shut down the computer?

  4 is the computer connected to the domain environment?

  You need to add the control panel in the start menu by following the steps below.

  (a) right click on the Start menu

  (b) select Properties

  (c) with bullet menu selected startup, select Customize

  (d) in the tab Advanced in the elements of the start menu, the value Panel (an object) to display as a link.

  Customize the Start Menu

  http://www.Microsoft.com/windowsxp/using/accessibility/customizestartmenu.mspx

   

  See the below Microsoft article and try the steps mentioned on the question of the judgment

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista SP1 will fail with a message indicating that I have the wrong language pack.

  Vista SP1 fail with Vista Ultimate...

  Hay there. Recently moved to Sweden, the United Kingdom. Installed Vista Ultimate (64 bit). It's a Swedish and Swedish-language facility. There no SP1, but when I download the stand-alone SP1, the installation didn't say that I have the wrong language pack... suggestions?

  Hello

   

  Method 1: Download Service Pack 1 from the given link and see if that helps.

  Windows Vista Service Pack 1 all language standalone (KB936330):

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=910

   

  Method 2: See the following article:

  Error message when you try to install Windows Vista Service Pack 1: "Windows Vista Service Pack 1 cannot be installed on your computer.

  http://support.Microsoft.com/kb/947876

• I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009

  original title: ACTIVATION of VISTA
  I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009.

  You simply have to use telephone Activation...

  activation by telephone (call of the operator)
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• Not able to scan from the printer to my computer control panel using the HP Photosmart 5510

  Hello

  I recently bought the new HP Photosmart 5510 all in one - and I am not able to scan from my printer to my computer.

  I am however able to scan by launching the scan of the computer. I talked to HP customer earlier this evening and we ran printing + scan doctor and can't find any problems.

  I am running Windows 7-64 bit and that you have installed my wireless printer using the Installation CD supplied with the printer today.

  I could not finish troubleshooting with the technician that I talked to because I had to go to work. The person that I spoke with proposed possibly the full functionality of software downloaded from the hp.com site, which I'm happy to do, but I think that it is useless, because I have the CD of installation here. (The rep that I talked to was very nice, but I prefer not to have to uninstall and reinstall if it is not necessary)

  Because as I mentioned above, everything works perfectly and I am able to scan - but not directly from the printer itself.

  When I try to scan from my printer to my computer an error message appears on the control panel of the printer indicating that: there is no scan destination options of analysis chosen / no..

  However, I can't find anywhere with my HP software where I could add / make sure that the destinations were there. (As I could on my other printers. (IE. By the solution Center)

  This printer does not appear to be a solution center that I could find and the scanner installed with the CD icon doesn't give me any options regarding changing the settings of the parser

  I wonder:

  1. the Hp Photosmart 5510 does not have the capacity to scan from the printer control panel?

  2 OR the CD installation provided with my printer only has the base drivers as the agent of tech support suggested? Which means to scan from my printer I need to download drivers for your hp Web site?

  3. or is the problem because of something else entirely?

  Thanks for your help!

  HI Dublin,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Photosmart 6510 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  Version 28.8