Control tab in Workspace object...

Similar Questions

• Controls tabs flashing when Invisible

  A little history: I have a tab control that contains several controls of void and this control tab is located at the top of a vision acquisition screen. While the program is running, the user can hit 'h' key to hide all the controls, so that the user can see the screen for the acquisition of any vision. I came across a bug which, in don't break my app, is really annoying. What happens is that when the user presses the 'h' key, all the controls disappear as expected (I do this by using the property node 'visible' to the tab control), but once per second the controls on the tab flash on the screen and then disappear again. Still, these are the controls inside the tab, tab no it's me. The tab it's self is invisible as expected. Has anyone else seen this before?

  Just guessing here, but I've seen funny things with the tab controls, especially when working with the visibility property.  I suspect that 'under the hood' LabVIEW uses the visibility property to get the tabs to work.

  In your example I (notied that you write the property each iteration.)  It's not too big, a method and can lead to some ineffecintcies.  Also, when the objects overlap on the FP an update to any object overlaping requires all objects to cool off, so you can lose a lot of time processor that could bog down your CPU. A possible workaround, you can try is to add a loop secod with an event inside structure to capture only changes to the visible Boolean value.  Another thing to try would be hitting the visible property of the objects in the tab directly.  This excerpt is a reasonable example.

  

• In the new window of the tab, I get a full screen of a site, and I do not see the gear of NEW CONTROLS TAB

  In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
  I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
  I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
  I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciated

  What do you see on the page, just nothing?

  Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit

  If you open a new tab, which solve this problem?

  Edit: sorry for typo's fault: browser.newtab.url

• How can you increase or zoom to the size of the points of control/tabs menu bar? They are tiny in HD resolution.

  I have a big screen and I put high resolution. This makes it very small. I bring it to the top with no squint, but it does not work on the superior/tool menu bar/control/tabs or their menus, leaving me squinting again scrolling. There must be no feature squint for this area of the browser

  NoSquint changes only the display of web page, not the user interface of Firefox.

  Try this add-on:

  • Theme and change fonts size ->https://addons.mozilla.org/en-US/firefox/addon/theme-font-size-changer/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• EVENT_MOUSE_POINTER_MOVE and controls tab

  Is there a way to get EVENT_MOUSE_POINTER_MOVE events in a callback whenever the user moves the mouse on a panel that is part of a tab control?  Basically, I don't see a way to set a reminder Panel for panels that are made inside a tab control, which would be possible using the old EasyTab way of doing things.  Can I set a reminder Panel for tab control panel is on, but the recall seems does not have EVENT_MOUSE_POINTER_MOVE event when the mouse is on the tab control.  I put a reminder on the control tab itself, but it seems only to receive EVENT_MOUSE_POINTER_MOVE events when the mouse is over the edge of the control.  It seems that there is something obvious I'm missing here, but I cannot understand what it is.  Thank you!

  You can get the handle to the desired tab group and then install a reminder Panel for this Panel. I have attached a sample program. I hope this helps.

• Control tab as well as 2 pages

  I want to create a control tab as well as 2 pages, each page there are 2 buttons - 'OK' and 'Cancel '.

  On page 1, click on 'OK', page 2 will be disabled and greyed out, until the click on "Cancel". And vice versa for the buttons on page 2.

  How to do this?

  Thanks in advance...

  This is an easy way to do it!

  Paul

• Tab control tab

  My goal is more

  When I press the tab A tab control test, the B tab should disepear in the test tab control and only the tab should be visible in the control tab of test2 (not grayed out). The same thing can happen when B are pressed, wil say will be visible only.

  In other words, I want to use a tab control to control other tabs visible tabcontrols

  Problem solved here.

  (Do not create another new thread on the same topic.  He loses popular time because you do not give them the advantage of seeing what happened on the issue already.)

• How can I add a page control tab at run time?

  Hello

  I'm trying to add pages in the control tab in run mode, but I can't because it must be in edit mode.

  Here are the steps that I have:

  1. run the application.

  a. the application reads a txt file and it translated into a table with the number of rooms; [201, 202, 203, 204]

  b. the application takes this array and puts in place of the pages after how it is in the table and names must be the same as the numbers. (Now the program will start to collect information to fill the pages.

  c. the user can now change between pages. (Each page will have a table that will be updated with new information at run time)

  Is this possible or have you another solution?

  Grateful for answers.

  No, you cannot add pages, just as it is not really supported to add commands or the lights either (well, unless you plan to have always installed LabVIEW and not only the execution engine. If this is the case you can self-generate tabs etc. with VI Scripting pages).

  You can use an image control to "simulate" additional tabs, the orders or the lights, but normally it is possible to find a different and easier solution.

  In your case, it seems that all the pages have the same controls on them, it would be just the content that would change. So what you really want is a way to navigate between the 'rooms' availability You could add a list next to the tab control box, fill the list box with the availability of the rooms and the value of the list box to select the content to display on the tab of single page beside him, or you can use a menu drop-down. If you do not like these alternative presentations of the room options then you can generate the tabs in an image control and have a tab control page below which showed the content of the tab selected in the image control. That's a lot of work.

  Another option would be to create Let's say 10 pages in edit mode and then have the arrows under the control that allowed the user to navigate through the available rooms in groups of 10 (still is not really necessary to individual indicators on each page you don't need to make them on page... something to get this must simply move the indicators and controls on the tab control with the) arrow keys Cela will give you a black frame behind them, but in run mode, it will look as if they are on each page). In this way, you could have the appearance tab and navigation without having to simulate the tabs with an image control. The fact that many other graphical interfaces have such navigation of two levels means that the user will still find intuitive to use.

• Put option on the page does not work in the Easy Print VI Panel, controls tabs are not displayed

  Found two problems with the screw of report generation:

  (1) in the Panel of VI feel easy (report generation) or the Documentation.vi, the layout options don't work (dug in the sub - VI and found that they are not connected to anything).

  (2) If you have the controls or the lights in a tab control and try to use the Easy Print VI Panel or Documentation.vi with the option to include controls in the report, they do not appear. The only indications/commands that appear are those that are displayed on all tabs (that is to say, to create a control and move it over the tab control so that it appears on every page).  There's a Subvi (Expand_control_ref_with_nested_controls.vi) which is called to handle the nested controls (IE, grapes, berries, etc...), but it should have a case to handle the controls tab.

  Hey Sajosie,

  Dig into the Sub - VI you are right in saying that the Options available to the user input is not connected to anything for most cases. However, in the case of failure to "Quick Print" Layout Options are used to change the layout of the report. In help for this VI, he mentions that this entry is ignored for the report "Standard reports" and "HTML" options However, it does mention that this ignorance of Layout Options is expected for the 'word' or 'Excel' reports.

  Especially regarding the controls and indicators in the report which appear on the tab controls, I can make a product suggestion to do this kind of design more compatible with the mere impression VI Panel façade or Documentation.

• Is redundant control tab in my case?

  Hi all

  I use the tab for the first time control in labview.

  Basically, I just want to put this control on the front to make things to look better and in order, but it seems more than a decoration, but a control in the block diagram, I'm not sure if there is a way to remove that from block diagram but stay in front panel.

  Any idea is appreciated,

  Thank you very much

  Kunsheng - Chen

  I use controls tab to organize my front panel and doing nothing with it on the block diagram.  It's not a big deal (at least for me) to throw right on the side the block diagram of the road.

• [MN] Analytic workspace object does not exist

  I follow the tutorial here: http://st-curriculum.oracle.com/obe/db/11g/r1/olap/cube/buildicubes.htm
  
  For our work environment, all data from the source is located in the OLAPTRAIN schema, but all dimensions and cubes are built in the User1 schema. To do this, I just changed all mappings to the good OLAPTRAIN schema. However, when I get to the step of loading and display of Cube data and click on maintain Cube SALES_CUBE I get the following error:
  
  INI: error creating a generic Manager definition to TxsOqConnection::generic < BuildProcess > INI: XOQ-00703: error running command OLAP DML «(STATLEN (USER1.» SALESTRACK_USER1! (TIME): ORA-34492: workspace object Analytics User1. SALESTRACK_USER1! There is no such thing as TIME.
  ') ', Generic TxsOqAWManager::evaluateExpression
  
  I guess that it refers to the TEMPORAL dimension of the User1, that exists. The TIME dimension was created using a template, but there seems to be something wrong with it so I recreated the dimension from scratch, you re-create the mappings between the original model of TIME. Old TIME dimension has been deleted, and now only the manually generated TIME dimension exists.
  
  Any ideas?

  Run the following command to list the dimension objects in the AW.

  set serverout on
  begin
  dbms_aw.execute(q'!
   aw attach USER1.SALESTRACK_USER1
   listnames dimension
  !');
  end;
  /
  

  The error suggests that the TIME is not a dimension in the AW. It is possible that you will find something like "(HAE) 1" instead because of the mishap of creation. To locate the name of the physical dimension associated with a logical (AWM) dimension, you can do this. (11.2.0.2 or later.)

  set serverout on
  begin
  dbms_aw.execute(q'!
    show objorg(dim owner 'USER1' 'TIME')
  !');
  end;
  /
  

• ORA-34492: analytic workspace object &lt; cubename &gt; _STORED does not exist.

  I have problems to access the data in the cube of one user other than the one where the AW will be built.
  
  Here's what I did to the user 1:
  
  1. create two AW in user-1: AW-1 and AW-2.
  
  2. create all objects in these two AW
  
  3 AW-2 is dynamically linked on the setting of the AW-1 by PERMIT startup programs. Please refer to attach several AW
  
  4 refreshed the two AW for loading data
  
  5 ALLCOMPILE - no errors.
  
  6. created some views SQL on User-1 which basically ask the views of the underlying cube. I have also a few queries using the olap_table option.
  
  7. all my querries work very well at user-1. I can access the data of 1 AW and AW-2.
  
  
  However, we provide access to views abstract SQL above by user: user-abs. In 10g, everything we did was grant select privs to all tables of $ User - 1.AW and also on all views sql. That would leave user-abs recover data from user-1 ice all.
  
  I'm not able to get the ABS users to do the same in 11g. We encounter an error stating that there is no such thing as the workspace object < cubename > _STORED. The cubename to what it refers exists AW - 2.
  
  I select given privs on all tables of $ AW, views of dimension, views of cube and the views sql abstract but the error persists.
  
  I tried to search this forum but did not find all the useful leads. Any help will be greatly appreciated.
  
  Thank you!
  
  Database - 11.2.0.1
  MN - 11.2.0.2.0A

  I think I understand the problem, and I have at least one solution for you.

  Your PERMIT_READ to USER-1 program. AW - 1 tie USER-1. AW-2, and as the attachment of part of this process, we must implement object for all objects USER-1 security. AW-2. For example, if you SELECT for X-USER-1 cube access. AW-2 but no access update, then we'll run the following

  REVIEW X_STORED
  PERMIT TO WRITE WHEN FALSE

  We run so essentially involving them objects OLAP DML USER-1. AW-2 as part of the PERMIT_READ on USER-1. AW-1. It strikes the restriction documented at PERMIT_READ I mentioned in my previous post.

  You don't hit the problem when running as a USER-1 because USER-1 automatically gets all permissions on the objects he owns, so we try not to run/PERMIT to take into ACCOUNT.

  You don't hit the problem of setting USER-1. AW-2 directly because the object security is applied outside the context of the PERMIT_READ on USER-1. AW-1

  You don't hit the problem if you have connected the USER 1. AW-2 and then withdrawn because (I think) USER-1. AW - 2 remains in a State of 'attached soft' after the initial attachment and we does not apply the security of objects that we have "attached soft" back to "hard Attaché".

  The solution is to grant all types of object security on objects of the AW-2 USER-2. This includes not only the SELECT, but also the UPDATE, INSERT, etc. Just give everything in the AWM dialog for all dimensions and all the cubes. Once you do this, the second user should be able to connect wihtout error because there is no need for us to CONSIDER/PERMIT.

  I don't know yet if this should be considered as a formal bug or if this is the expected behavior by the people who coded it.

• How to open the tab control, clicking on an object?

  Hello

  I have a problem with labview, you can help me?

  I want to open a control object tab to import goods in a table. but, I want to open, when I click on an object like a tank. (in fact, first of all, it is invisible and clicking on the object, will be visible)

  How can I do?

  I think, I can do it with a push button or a switch with the same size to a tank or any object that I use, but with an invisible color! is it possible or new suggestion?

  Best regards

  
  

• How to create the data control to a custom object of sale cloud using web service.

  Hi all

  I'm working on a requirement I need to display the common custom object data and their children object. After the display of the data user will be able to select multiple records by using the check box and then update the State to close.

  So basically, I need to create a table in which the data will fill with the checkboxs and when the user clicks on the button update then I need to update a field in the parent object.

  Any help would be appreciated.

  Thank you

  You must follow the steps below

  1. right click on the template project, select the new option

  2 Select the data control in the left hand side of the tab "All Technologies"

  4 Select "control of data from the Web Service" in the right side panel

  3. Enter the name of the data control (custom name)

  4. provide your WSDL to the URL https://crm-domain.oracleoutsourcing.com/foundationCustExtn/CrmCommonReferenceService?wsdl

  5. click Next, next if all methods to winow than wsdl, mix to the right and click Finish button

  6 refresh "data control" in your right side panel to request

  7 expand control of data and select only control data that you have already given

  8. then you can see the methods that comes from your wsdl.

  9. Select the method and expand it, you will get the return values

  10. drag and drop the return as a table value, you will get the af:table on the page

  11. don't want to operatet this table.

• Table control tab and size

  Hello everyone,

  I use control table for the first time and have problems in the following areas:

  1 when I start to insert values in cells, I could go and insert values with unlimited seemining the number of rows. Is there a way to limit the number of available lines in the table for a specific number? I tried to use the NumRow property, and apparently it is more useful to indicate the number of lines to display in the table control.

  2. when I hit the tab key, the focus shift from one cell to another, which is good, except that it does not jump to the last column. He goes from cell 4 to 5, 5 to 6 each time I type the tab key. But when he is in the 6 cell and I type the tab key, it climbs to 8 cells, instead of cell 7, which is what I expected it to do. Is there a way to fix this? See the image below.

  Thanks for your help.

  Yours,

  chati

  

  Hello

  Take a look at this little example. I hope this helps.

  Best regards

  Fabian