EVENT_MOUSE_POINTER_MOVE and controls tab

Similar Questions

• In the new window of the tab, I get a full screen of a site, and I do not see the gear of NEW CONTROLS TAB

  In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
  I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
  I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
  I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciated

  What do you see on the page, just nothing?

  Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit

  If you open a new tab, which solve this problem?

  Edit: sorry for typo's fault: browser.newtab.url

• Tab and control keys do not work in Firefox (they work in other browsers) AND I went to a new keyboard.

  Tab and control keys do not work the browser Firefox (my browser is up-to-date). The buttons work in IE and Chrome, however, until I realized that, I even changed my keyboard for a brand new, hoping that would solve the problem.

  Hello arlusk, the problem is probably an extension that is not working properly. Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• I can't resize any object inside a tab control and control of the tab itself

  Hi all

  Since this morning I noticed that I can't always resize the object placed inside a tab control or the control tab itself.

  I have a few objects (controls, indicators, etc.) outside of the tab control, and they are resizable (I can see the dark blue squares and I am able to adjust the object); Instead, any object inside the tab control is still not resizable (when I select the dark blue boxes are not visible and I can't access the properties of the object by clicking with the right button of the mouse over it). If I have access to the properties of the object to the block diagram, the appearance of her-> frame size is gray and I can't change the size fields.

  It seems that something was changed when I try to adjust the minimum window size and appearance of windows in the proposals of VI, but I restore the previous values...

  How can I solve this problem?

  Sure, tab control is not locked.

  If the tab control is locked that resize is not possible

  Lucast85 wrote:

  Hi all

  Since this morning I noticed that I can't always resize the object placed inside a tab control or the control tab itself.

  I have a few objects (controls, indicators, etc.) outside of the tab control, and they are resizable (I can see the dark blue squares and I am able to adjust the object); Instead, any object inside the tab control is still not resizable (when I select the dark blue boxes are not visible and I can't access the properties of the object by clicking with the right button of the mouse over it). If I have access to the properties of the object to the block diagram, the appearance of her-> frame size is gray and I can't change the size fields.

  It seems that something was changed when I try to adjust the minimum window size and appearance of windows in the proposals of VI, but I restore the previous values...

  How can I solve this problem?

• How to use and control the tabs?

  Sorry for such a general question, but I use Firefox with older versions of Mac OS x for years and have just been struck by this brand new and I have no idea on your tabs, "new tab page" etc. Can you just send me some documents so I can understand what they are and how to use them?

  All I see on my headers Ff are all sorts of legs that have no relevance to me, like 'how to stop Firefox from... '. "(twice), a few other symbols Ff and other"tabs"I don't know everything." All the do is filling up a bar line.

  Thank you-

  You are welcome.

  If you have any other questions feel free to ask them.

• How can you increase or zoom to the size of the points of control/tabs menu bar? They are tiny in HD resolution.

  I have a big screen and I put high resolution. This makes it very small. I bring it to the top with no squint, but it does not work on the superior/tool menu bar/control/tabs or their menus, leaving me squinting again scrolling. There must be no feature squint for this area of the browser

  NoSquint changes only the display of web page, not the user interface of Firefox.

  Try this add-on:

  • Theme and change fonts size ->https://addons.mozilla.org/en-US/firefox/addon/theme-font-size-changer/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• My front/back buttons do not work - have done so "reset bars, tools and controls", but they don't always work

  When I downloaded the latest version, I got a new screen with the orange Firefox tab at the top. Which was very good, I found what I wanted, but the previous/next buttons didn't work. I checked the help section and went through suggestions to "toolbars and controls to reset" - this reset and I lost the orange box - which is not serious, but the previous/next buttons still do not work.

  Do you have more than one tab open? If you don't go to a different site in one tab, then Yes, the buttons will be grayed out. If you went somewhere in another tab, then these sites should be accessible by clicking on buttons.

• Control tab as well as 2 pages

  I want to create a control tab as well as 2 pages, each page there are 2 buttons - 'OK' and 'Cancel '.

  On page 1, click on 'OK', page 2 will be disabled and greyed out, until the click on "Cancel". And vice versa for the buttons on page 2.

  How to do this?

  Thanks in advance...

  This is an easy way to do it!

  Paul

• Tab control tab

  My goal is more

  When I press the tab A tab control test, the B tab should disepear in the test tab control and only the tab should be visible in the control tab of test2 (not grayed out). The same thing can happen when B are pressed, wil say will be visible only.

  In other words, I want to use a tab control to control other tabs visible tabcontrols

  Problem solved here.

  (Do not create another new thread on the same topic.  He loses popular time because you do not give them the advantage of seeing what happened on the issue already.)

• How can I add a page control tab at run time?

  Hello

  I'm trying to add pages in the control tab in run mode, but I can't because it must be in edit mode.

  Here are the steps that I have:

  1. run the application.

  a. the application reads a txt file and it translated into a table with the number of rooms; [201, 202, 203, 204]

  b. the application takes this array and puts in place of the pages after how it is in the table and names must be the same as the numbers. (Now the program will start to collect information to fill the pages.

  c. the user can now change between pages. (Each page will have a table that will be updated with new information at run time)

  Is this possible or have you another solution?

  Grateful for answers.

  No, you cannot add pages, just as it is not really supported to add commands or the lights either (well, unless you plan to have always installed LabVIEW and not only the execution engine. If this is the case you can self-generate tabs etc. with VI Scripting pages).

  You can use an image control to "simulate" additional tabs, the orders or the lights, but normally it is possible to find a different and easier solution.

  In your case, it seems that all the pages have the same controls on them, it would be just the content that would change. So what you really want is a way to navigate between the 'rooms' availability You could add a list next to the tab control box, fill the list box with the availability of the rooms and the value of the list box to select the content to display on the tab of single page beside him, or you can use a menu drop-down. If you do not like these alternative presentations of the room options then you can generate the tabs in an image control and have a tab control page below which showed the content of the tab selected in the image control. That's a lot of work.

  Another option would be to create Let's say 10 pages in edit mode and then have the arrows under the control that allowed the user to navigate through the available rooms in groups of 10 (still is not really necessary to individual indicators on each page you don't need to make them on page... something to get this must simply move the indicators and controls on the tab control with the) arrow keys Cela will give you a black frame behind them, but in run mode, it will look as if they are on each page). In this way, you could have the appearance tab and navigation without having to simulate the tabs with an image control. The fact that many other graphical interfaces have such navigation of two levels means that the user will still find intuitive to use.

• Navigation to a controls tabs of a tab control page returned by a server VI call

  Hello

  Purpose a documentation exercise, I wish I could) 1 load a VI by program 2) determine if the tab control is present, if yes how many tablets and if it has a built-in tab control sequence sequence 3) thanks to tabs, snap the front (FP) and the icon 4) and repeat until done.

  I use "to more specific class" and the node property "Label.ClassID" to try and capture if a tab control is present in VI but nothing helps. Any suggestion, which miss me to access the complete list of controls in the VI?

  -Chroma

  Hi Chroma,.

  In case it's useful, here's a way to list recursively tabs and "Sub Tabs" of a VI.

  See you soon!

• Put option on the page does not work in the Easy Print VI Panel, controls tabs are not displayed

  Found two problems with the screw of report generation:

  (1) in the Panel of VI feel easy (report generation) or the Documentation.vi, the layout options don't work (dug in the sub - VI and found that they are not connected to anything).

  (2) If you have the controls or the lights in a tab control and try to use the Easy Print VI Panel or Documentation.vi with the option to include controls in the report, they do not appear. The only indications/commands that appear are those that are displayed on all tabs (that is to say, to create a control and move it over the tab control so that it appears on every page).  There's a Subvi (Expand_control_ref_with_nested_controls.vi) which is called to handle the nested controls (IE, grapes, berries, etc...), but it should have a case to handle the controls tab.

  Hey Sajosie,

  Dig into the Sub - VI you are right in saying that the Options available to the user input is not connected to anything for most cases. However, in the case of failure to "Quick Print" Layout Options are used to change the layout of the report. In help for this VI, he mentions that this entry is ignored for the report "Standard reports" and "HTML" options However, it does mention that this ignorance of Layout Options is expected for the 'word' or 'Excel' reports.

  Especially regarding the controls and indicators in the report which appear on the tab controls, I can make a product suggestion to do this kind of design more compatible with the mere impression VI Panel façade or Documentation.

• Controls tabs flashing when Invisible

  A little history: I have a tab control that contains several controls of void and this control tab is located at the top of a vision acquisition screen. While the program is running, the user can hit 'h' key to hide all the controls, so that the user can see the screen for the acquisition of any vision. I came across a bug which, in don't break my app, is really annoying. What happens is that when the user presses the 'h' key, all the controls disappear as expected (I do this by using the property node 'visible' to the tab control), but once per second the controls on the tab flash on the screen and then disappear again. Still, these are the controls inside the tab, tab no it's me. The tab it's self is invisible as expected. Has anyone else seen this before?

  Just guessing here, but I've seen funny things with the tab controls, especially when working with the visibility property.  I suspect that 'under the hood' LabVIEW uses the visibility property to get the tabs to work.

  In your example I (notied that you write the property each iteration.)  It's not too big, a method and can lead to some ineffecintcies.  Also, when the objects overlap on the FP an update to any object overlaping requires all objects to cool off, so you can lose a lot of time processor that could bog down your CPU. A possible workaround, you can try is to add a loop secod with an event inside structure to capture only changes to the visible Boolean value.  Another thing to try would be hitting the visible property of the objects in the tab directly.  This excerpt is a reasonable example.

  

• Is redundant control tab in my case?

  Hi all

  I use the tab for the first time control in labview.

  Basically, I just want to put this control on the front to make things to look better and in order, but it seems more than a decoration, but a control in the block diagram, I'm not sure if there is a way to remove that from block diagram but stay in front panel.

  Any idea is appreciated,

  Thank you very much

  Kunsheng - Chen

  I use controls tab to organize my front panel and doing nothing with it on the block diagram.  It's not a big deal (at least for me) to throw right on the side the block diagram of the road.

• My volume icon and control is missing

  My volume icon and control is missing and I also think that the program is now defunct.  A spokesman for AOL of sees has accessed our computer to 'clean up' to make it work better and I think that he has removed my volume and its program.  When I tried to add the volume on my computer icon, he told me I do not have the program and install it.  When I went to add the program by following the instructions, it took me to Microsoft, but there is no program called "volume and noise."  In reading other posts, that it is said to right click on Start/Properties/Notification...but, I don't have the option "notification" under properties.  What should I do?

  My volume icon and control is missing and I think also the program is now defunct.  A spokesman for AOL of sees has accessed our computer to 'clean up' to run the best and I think that he has removed my volume and its program.  When I tried to add the volume on my computer icon, he told me I do not have the program and install it.  When I went to add the program by following the instructions, it took me to Microsoft, but there is no program called "volume and noise."  In reading the other messages he said right-click on Start/Properties/Notification... .but I don't have the option "notification" under properties.  What should I do?

  Hello

  Notification options are only available for Windows Vista and higher. The Control of the Volume icon may appear from the Control Panel.

  You said that the Spokesman of AOL could have removed the Control of Volume, please make sure that the following files exist on your system to see if the Setting of the Volume has been either deleted or not
  %SystemRoot%\system32\sndvol32.exe
  
  
  If you do not want to enable the display of the Control of the Volume icon, please try the following
  [1] method: Using the control panel to change the settings for sounds and Audio devices
  • On the start menu, select Control Panel.
  • Double-click sounds and Audio devices.
  • On the general tab, check Place volume icon in the taskbar
  • Click OK

  Thank you
  Have a nice day :)