Control the Flash simple Question?

Similar Questions

• Detection of the browser - simple question

  Hola everyone

  Please check my post.

  My situation is simple:

  Whenever I publish a Flash project, when I opened the html file that is generated with the SWF, I am never able to see the swf file into the html file (when I open it in Dreamweaver, for example.) It's frustrating to also manipulate the html file is concerned. All I see is a text on the 'Place content alternative here for those without Flash Player installed, etc.' Why can I not see the swf file? This is as expected when I download all the appropriate files or view in a browser locally.

  Otherwise, what I have to do in order to properly define the html file, open a new file and embed the SWF manually. But this approach is not good because I'm missing out on all the other browser features detection that the html file published by Flash includes naturally. How can I keep this advantage and always enter the details of the design of the html file?

  Thanks in advance!

  Graham

  See this http://www.gotoandlearn.com/play?id=77 it's on swfobject when look at a tutorial please be patient it may not seem like relivent to you talking during the first 5 min 15 sec.

• 4 flash simple Questions that are stumping me!

  What is the frequency of images for Web Animations

  Q1. I do an animation which will be played on the web. What is the frequency of images by default (fps) of Flash CS5? And what is the frequency of images for the web?

  Q2. My animated film must be 30 seconds. So at 15 frames per second, it would mean that I have to use 600 frames in Flash?

  How all hide so all I see is the content on the stage?

  I have a large image which extends beyond my films stage size so when I saw my film image is visible. How to hide anything that extends beyond the window size of my films? I think I can create a layer named "mask" and place it above all the other layers, but I forgot how to do the mask. Any help is appreciated.

  How to fade a chart

  I have a graphic element (any) and I want it to fade from 0% to 100%. In older versions of Flash I could just select the symbol and then set it of an alpha value of 0%, move a little and then set the alpha to 100%. Voila! but now, it doesn't seem to work that way. How can I do this in CS5?

  Peter, you're great! Thanks a lot for this. It will help a lot.

• Skining & Security: CSS loaded only after the connection [simple question]

  Hi all
  
  In an adf with skining trinidad application:
  
  The form css skining is not loaded on the login page. If the login page is open after the user is logged that is looking fine.
  What I notice is that by trying to open the .css to the browser (full path) the browser redirects to the login page (if the user is not logged).
  
  In the web.xml file force security looks like:

    <security-constraint>
      <web-resource-collection>
        <web-resource-name>allPages</web-resource-name>
  
  
        <url-pattern>/</url-pattern>
  
  
      </web-resource-collection>
      <auth-constraint>
        <role-name>valid-users</role-name>
      </auth-constraint>
    </security-constraint>
    <security-constraint>
      <web-resource-collection>
        <web-resource-name>adfAuthentication</web-resource-name>
        <url-pattern>/adfAuthentication</url-pattern>
      </web-resource-collection>
      <auth-constraint>
        <role-name>valid-users</role-name>
      </auth-constraint>
    </security-constraint>

  I try to add as follows (permission-> allow uncked):

   <security-constraint>
      <web-resource-collection>
        <web-resource-name>resources</web-resource-name>
        <url-pattern>/*.css</url-pattern>
      </web-resource-collection>
    </security-constraint>

  but the same behaivour.
  
  
  My question:
  How to configure the security mechanism to ignore checking the files css or other resources?
  
  Thank you very much
  Bogdan

  Hello

  the problem is that you protect the directory root (context root JavaEE) to be accessible only to authenticated users. This blocks the CSS to be downloaded on the client. So what you need is another way to apply JSPX records authorization, you could do by * *.jsp as a security constraint, which would then allow access to other resources. Another option is to store the pages in a subdirectory/pages, and then specify the constraint of authentication/authorization as security / pages / *. If you work with ADF Faces and ADF then security ADF is an option to ensure their link pages

  Frank

• Does Canon 70 d has a bulit in triggering the flash! Or I need a third device!

  Hello. Well, I turned off the camera speedligt but I could not do proud without having built in flash on. What happens if I want to use the camera light speed without one on the camera. as I know that canon has a bilut regier and I did not need third party peripheral!
  Thank you

  The firing the flash using the flash on the camera and it is optical. You can 'turn off' the flash to use only the flash off camera, but the on-camera flash should always be raised.

  It will fire a pre-Flash, while the shutter of the camera is always closed to assess the light (if you use E - TTL instead of manual) and also to send instructions to the camera flash (again, for the E - TTL... but also to tell the off camera flash when fire.). The calendar has a fractional period. Then he tells flash off camera to fire trees, opens the shutter, then the detached flash (and only the off-camera flash), then the shutter closes.

  This all happens VERY quickly and you'd swear two flashes fired at the same time - when in fact the on-camera flash fires when the shutter is closed, and the detached flash fired his last shot when the shutter is open.

  To do this, you will need to go into your control the flash menu and tell him to 'disable' the on-camera flash. Disabling does not mean that the flash get used... It simply means that it does not at this final moment when the shutter is actually open.

  Also note that, because it using visible light (no IR) to convey instructions, detached flash sensor must have line-of-sight to the on-camera flash. If it is a flash like the Canon 430EX II Flash speedlite, the sensor is in the lower part of the Flash. This means that you may need to rotate the lower part of the flash to face the camera, then rotate the flash head to send the light where you need it. If the lower unit, simply is facing toward the front you will find that it is less reliable (especially on the longer distances or outdoors).

• Starting with a Cintiq in Adobe Flash - a series of simple questions desperately not found!

  I am completely new to the Flash IDE, but I used my 13HD Cintiq with Photoshop in the past. Despite the Tablet works well and correctly drawing, so far Flash feels very weird and almost unusable. I spent hours searching online for answers to these simple questions, and I found nothing. Help please respond if you can!

  1. Eraser brush size: I have the wacom pen, brush and Eraser gum (pretty standard) value. Can I adjust the size of the brush of the pen in the toolbar, but the gum is stuck to the smaller size! I put the tool eraser for the max brush size, and when the stylus is set on the Eraser tool directly, it is larger. How to set the other side of the pen wacom for a larger size of the brush? And aren't there keyboard shortcuts to increase or decrease the size of brush in Flash? (similar [and] in Photoshop)

  2 zoom brush: changes the brush size when you zoom in. People online say the size of the brush is constant, but it is simply not true. When you zoom to 200%, the brush must be twice as big is in 100% zoom. Is it possible to Flash this (normal) behavior?

  3 timeline packaging: can visit the 'step before an image' and "not back an image" (comma and period) key wrap the entire timeline, so walking to the front on the last image will frame 1 and walking backward on frame 1 goes to the last image? It's important for me to animate well loops, and I can't find anything online or in the preferences. Shift + comma and shift + period is acceptable workaround solutions, but they are not ideal, because I have the comma and period mapped to buttons on the Cintiq. I need them to wrap!

  4 digital brush thickness: is there a way to specify a thickness of brush with a number? I have to use the pen to get the STROKE thickness properties? At the very least, can I use a keyboard shortcut to specify the size, rather than click on toolbars?

  Honestly, I'm at the end of my rope here. I'm almost ready to completely abandon the Flash this in Illustrator, and then animate in Flash, so I've drawn everything correctly. Why everything is so different, and why I can't find one of these simple questions online?

  Him long and short of it is no you can't do most of the things you want to do as much as the brush is concerned. Flash has ALWAYS increased the size of the brush as you approach and it decreases when zooming. Why? No idea, but it has always been so.  You CAN increase the size of the brush in numbers but using the properties box. The Eraser is weird in Flash. so I use the Lasso tool and select what I don't want and delete it. Given that you're used to Illustrator you might not realize that selection of a brush stroke areas will NOT select the entire race as in Illustrator. You can only select parts. You can also sort of allow for what you call enveloping chronology by installing a command and by mapping to a custom key command. Make sure that there is a keyframe at the end of the cycle.

  Dropbox - Flash_Select_Next_and_Previous_Keyframes.zip

  Also, this could sort through what you want too:

  http://www.toonmonkey.com/frameJumper.fla

  Finally, Flash is no different that there has never been and it must be considered that, while the Illustrator has been developed by Adobe, Flash was developed by Macromedia and was then bought by Adobe years later then you "cannot really be expected to operate the same. Personally, I HATE the interface of Illustrator and hate the way it works if I hate it if Flash worked as an Illustrator!

  In any case, I hope this helps.

• How to control the speed of an animation in Flash Catalyst

  I created a simple slideshow in Flash and published as a .swf file. The slideshow contains little pictures and animation takes about 45 seconds to run at 8 frames per second. When I imported into Flash Catalyst, the animationa turns very quickly, taking only about 15 seconds to get through the whole slideshow.  I have re-adjusted the Flash animation to make it run more slowly, but when I imported the new version of flash catalyst, it rotates at the same speed, - always very fast.

  Is it possible for me to control the speed of my animation film and runs the same speed I've implemented in Flash?

  Thank you

  I don't know of a way. Flash Catalyst works at 24 frames per second, so any imported SWFs will run at the same speed of reading. Could recreate you the slideshow as a component with Flash Catalyst? It might be easier that by adjusting the slide show in Flash Professional.

  You also may need to remove the old imported SWF and import the SWF file adjusted, just to be sure that it uses the correct version.

  Chris

• I have a simple question about the meta-data.

  Hello. It is a simple question about the meta-data. How can I get the video bitrate of a flv or mp4 (video playing via NetStream file) file

  right now I have this:

  Code
  var netClient:Object = new Object(); netClient.onMetaData = function(meta:Object) { for (var in meta props) {} trace (props + ":" + meta [props]); } MovieClip (root) .durations = meta.duration; trace (MovieClip (root) .durations); }; NS.client = netClient;

  And my output is:

  videocodecid: avc1
  audiocodecid: m4as
  aacaot: 2
  Width: 960
  AudioChannels: 2
  videoframerate: 23.976
  TrackInfo: [object Object], [object Object]
  moovposition: 32
  avcprofile: 77
  audiosamplerate: 48000
  avclevel: 31
  seekpoints: [object Object], [object Object], [object Object], [object Object]
  height: 540
  Duration: 221.312

  As you can see, there is nothing of video bitrate.

  I know that the video bitrate of my videos, but then I have to manually type each number of bitrate into my flash project, and it would be such a fuss when I have a lot of videos. Would be nice if flash can detect the video bitrate.

  It's for my online portfolio.

  Why you divide by 8?  If you want to convert bytes into bits, multiply by 8.

• How to fix the folder flashing with question mark on mac pro

  I have a problem with my mac pro.  When I press the power on button, the grey of the screen become a folder flashing with question mark appears and it does not start.  What should I do?  I don't have an os x on a cd so I can not ignore the system...

  See:

  If a flashing question mark appears when you start your Mac - Apple Support

  What model Mac? What OSX version was on the Mac?

  If you do not have a partition recovery or restoration of the Internet

  On OS X Recovery - Apple Support

  Then you install an installation DVD

• Simple question... How do to add pictures on the body of my MAILS found 1000 results for how can I add photos to my Thunderbird emails

  How can simple question - I add photos to my mail body. But instead of the answer - found 1000 results for how can I add photos to my Thunderbird emails. There are answers that don't apply at all to the question anyway. Why must it be so difficult to get a simple answer to a simple question?

  Thunderbird is a bit like Microsoft, all the reasons as I dumped MS Live Mail.

  First, a lot of help for Thunderbird refers to the menus that may not be visible. It would be useful to you and us if you have your menus and toolbars visible.

  http://chrisramsden.vfast.co.UK/13_Menus_in_Thunderbird.html

  Then, open a window of writing. Activate the menu and operate.

  Now that you see an option "Insert"?

  If this isn't the case, you can assign composing in plain text, which does not support embedded images.

  Tools | Account settings| {Select account} | Composition & addressing and ensure "Compose messages in HTML format" are checked. If it is not already checked, go back to writing a message. No better now?

  Once you have the mode of composition HTML goes, you can use Insert | Image or various permutations of copy - paste and drag - move to the body of your message.

  A manual of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/

• MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on ex

  MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.

  You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.

  Maybe someone else will chime in with their own experiences.

  Russ

• The simple question is "where can I find the installer for the HP Quick start?

  The simple question is "where can I find the installer for the HP Quick start?

  BESR regards

  Hello:

  And here's one for W8...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_140915_1#tab1

• How to turn off the flash on a 600ex and still use it to control unit main radio send?

  I have several 600 EX - RT flashes.  Currently, I don't have a ST-E3-RT.  I thought that I read somewhere that you can turn off the flash in one of the of the 600EX and still have it control others.  I would like to be able do this by using a 600EX in my claw with the Flash disabled in Radio mode, controlling the other 600 EX flashes.

  Is this possible to do?  If so what are the steps in specific menus or what is the specific manual page, I need to go to in order to know how to turn the flash on the master to the wide and still, it works like the sending unit for the other 600 in radio mode.

  Thank you

  Jason

  Menu of your camera has a menu option for flash (the specific wording depending on the camera model).

  Enter this menu and tell him to 'disable' the flash.  This will allow the flash to do everything he does (for example the focus-assist beam will work, the radio will work, etc... but he fires the flash to take pictures.)

• Simple question about the signing of the app

  Hello.

  I develop libraries to be used in other apps.

  It will be a cod file, its name will be added to the jad as a dependency.

  My library has access to the secure API (call of the browser), so I have a simple question:

  can I register only my cod library or application that uses my library is expected to be signed in too?

  THX.

  You should be ok just signature cod of the library, if your application uses any API secure. However, I just make a habit to sign everything just in case.

• I can control the LED "flash"?

  I was wondering if there is an API to toggle the LED "flash". I saw the LED class, but it is not a constant for the flash, just the trackball and the State LEDs.

  There is no API in the BlackBerry API set that allow you to control the camera flash on a BlackBerry handheld.