Control the sound editing in AS3

Similar Questions

• Portege M750 - Volume knob does not control the sound

  Hello:

  Just made a new intall of Windows 7 (32 bit). Made from scracth with CD from Toshiba. The drivers that I downloaded from the site Web of Toshiba. Everything is ok, except the volume knob does not control the sound.

  Does anyone know driver I'm missing? All buttons and other functions are active except volume wheel.

  Hello

  Have you installed the VAP (value added package) for Win 7?
  EU from Toshiba are page pilot VAP v 1.2.40

• Class SoundMixer... cannot control the sounds created by the ACE?

  I'm doing a preso loading sounds in AS3 vs AS2.
  
  According to the AS3 SoundMixer class documentation "...". integrated controls of sounds continuously in a SWF file. it does not control created dynamically sound objects (that is, sound objects created in ActionScript). »
  
  Reference
  
  
  However, if I load a new AS3 document, type the following in the frame1 and then put "SoundMixer.stopAll ();" in the context of 20, he * will be * stop all sounds.
  
  I'm not exactly complaining, but are the docs wrong, or I'll just crazy here? I still have to find an instance where the class SoundMixer does not work operating docs.
  
  
  var mySound:Sound = new Sound();
  var mySoundRequest:URLRequest = new URLRequest ("someMusic.mp3");
  mySound.addEventListener (Event.COMPLETE, onSoundLoaded);
  mySound.load (mySoundRequest);
  
  function onSoundLoaded(event:Event):void
  {
  var localSound:Sound = event.target as Sound;
  localSound.play ();
  }

  midimidi,

  "> According to the AS3 SoundMixer class documentation"
  >.. .controls integrated streaming sounds in a SWF file. id is
  > not control Sound created dynamically (that is, objects
  (> Sound objects created in ActionScript). »

  Yes, I noticed that too.

  > However, if I load a new AS3 document, type the following command
  > in image1, then put 'SoundMixer.stopAll () '; in frame 20, it
  > * will * stop all sounds.

  This was also my experience. It is the same for the volume control
  on SoundMixer, and pan, through its soundTransform property, which
  provides a reference to a SoundTransform instance that is, without doubt,
  Global (in the sense of affecting all the sounds).

  > I'm not exactly complaining, but the docs are bad.

  My hunch is that the docs are simply wrong on this one.

  David Stiller
  Co-author, Foundation Flash CS3 for designers
  http://tinyurl.com/2k29mj
  "Luck is the residue of good design."

• Control of sound editing

  Hey guys, I was wondering if you would be able to help, please!

  I'm doing a presentation in flash, there are 3 segments, 1 is in harmony with the chronology of his 2nd video that is streaming and third becomes sound insync with the chronology.

  I can control the video that is no probs, but I want to be able to control the noise/scenario.

  What I want to be able to do is put in some controls just pause play stop and when I press pause that he interrupts, of course, when I push the game continues to play and when I press stop, it goes to the frame 1 and erase what ever he played in the scenario above.

  I know how to control the timeline, but no sound!

  any suggestions please?

  You'll find options of sound quality for the individual sounds if you double click on the sound in the library.

  If you look in your Flash publishing settings, you will find options of sound quality for all the internal sounds in streaming/event. These global settings may override individual settings of sound quality.

• How to control the sound volume on a cradle streaming sound?

  Hi all
  
  I have a MovieClip "Animation" with its added as a Streaming. I also created a SiderBar Volume I want to use to adjust the volume of the sound on my Flash.
  
  The SliderBar Volume work well and I need to assign some how the volume for the volume of position (value of). I was wondering if anyone can tell me how I can do this on a sound which is timeline based?
  
  Thank you very much and have a great day.
  
  Khoramdin

  > The SliderBar Volume work well and I need to some how affect the volume of the
  > (value of) the volume of the position. I was wondering if anyone can tell me how I can
  > about a sound which is timeline based?

  It's easy - no one will be able to tell you a way to do it.
  Sound control is very limited when you use the timeline sounds. That's why
  It's great to have the Sound class, which gives you a lot of methods
  and properties to deal with sound. One would be setVolume(), which
  allows developers to change the volume of the sound when running.

  ---
  Christian Scholz-Floter

• How can I dynamically control the sound

  Hello
  In the header part of my site, I have included a flash with sound, it plays automatically when the page is loaded, if I stop the sound in homepage, it plays the sound, when I go to another page. I want to play the sound continuously, even if the pages are loaded. How can I solve this problem?

  The problem is that the whole page reloads when you click on a button.
  My suggestion would be to frameset to load separate pages in a separate frame navigation. This should keep the music played on all pages as navigation charges ever.
  Also, I noticed that there is no way to start playing the sound again after you stop it once.

• Satellite A100-784: could not find a FN combination to control the sound volume

  Hello, I just bought this laptop but I can't find the combination Fn, which increases or decreases the volume
  sound.

  Anyone who can help me?

  Hello

  You can't find this FN function because it does not exist!
  You must use the Volume dial on the side before the laptop!

• unmute and control the sound level

  How can I manage Mute on and off control?

  R.Click the speaker of the clock, select playback devices, locate materials, properties, change... In addition, most

  keyboards have this function.

• Question about control of the sounds...

  Hello
  The purpose of my script is if a movieclip is moving from right to left the pan of wil sounds also from right to left.
  And so far it works! But when I want more sounds, the sound effect in Flash does not what to do.
  If you see my record, values by movieclip increases the correct way.
  
  I know that the standards for attaching a sound like:
  
  -) your sound object must be connect to a movieclip (yoursound = new Sound (yourMovieClip);
  In this way, you can control the sound individual without paning all sounds that are on the stage.
  
  And I tried to do this, but still the next sounds come in different then the first sound.
  Also if I want to stop this (sound) yoursound.stop;... is stops all sounds?
  
  If you want to test this code, you must do the following:
  
  The size of your internship must be: 600 x 240;
  In your library must be sound files (more then 5 seconds) named: "geluidje1" (link ID)
  And draw a square and convert it to a movieclip and delete this. And in your library to find this place
  the binding id: 'vierkant '.
  
  Please let me know if someone is now how to solve this problem.
  
  

  Thanks for the tips! After spending many hours, testing... and testng. I finally got to work!

  Here is my code:

• I'm trying to recover my small speaker on the taskbar to control the volume

  I tried to get it back, but I told myself that the program is not downloaded.  Will add and remove programs.  I can't control the sound on my computor or speakers.  I must have accidentally he removed when more space on my hard drive.  I don't know anything about this stuff.  Help!

  1.	Click Startand then click Control Panel.
  2.	Click sound, speech and Audio devices.
  3.	Under Pick a task, click change the speaker settings.
  4.	In the dialog box properties of sounds and Audio Devices, on the Volume tab, select the volume icon to Place in the taskbar , and then click OK.

  Now, when you want to adjust the volume, click the icon and move the slider.

• The sound allows you to check the default speakers. However, some applications use some speakers while other applications use different players.

  I produce several channels on mogulus. (see http://theallyvideo.blogspot.com/)

  I use a HP desktop computer smart touch and a few laptops from Sony to run the application studio to mogulus.com.

  Use the mogulus studio, I can watch multiple video streams live as sources and monitor outgoing video as well. There's my video stream live from other computers/producers in 4 different States more video feeds of my two laptops. NOTE: see www.mogulus.com

  I am running Vista on all three machines. (I found that XP cannot handle 4 video stream, I got up to 9 with Vista.

  Audio wise, it has worked on all three computers.

  Mogulus studio, use Adobe to handle all audio and video.
  I can turn on or off the sound of my guests so I can hear them and coordinate that I then put on the air and see how long they need.

  The outgoing video monitor also has an audio mute button. When using the PC's built-in speakers, it's a MUST to mute the audio monitor outgoing when you go live, and then reactivate the sound when he in transmitting the other guests, or playing pre-recorded clips.

  I also have a Microsoft keyboard with maximum volume down and cut the buttons on my desk. Two Sony laptops have the same keys and worked perfectly, controlling the built-in speakers. The keys make it easier to mute the speakers to use the key mute in the studio during the 'live '.

  I had another option for speakers of inhibition to avoid the Larsen effect. It is to plug headphones into the headphone jack on the monitor.
  I could connect the headset, do some direct ads, spots a show pre recorded, disconnect the headset and wander in the 'studio' listening to the show through PC speakers.

  So far has worked flawlessly, with two small problems.

  • (1) I sometimes forgot to mute the speakers when I spotted my local webcam and microphone. This would cause comments as soon as I saw the video and it came out alive. The microphone pick up the sound from the computer speakers.
  • (2) the microphone integrated into the HP desktop computer doesn't have a good sound. The mic's Sony are OK, but too far from my mouth to provide good storytelling.

  I decided that the Microsoft LX3000 USB integrated boom Mic headset would be the perfect complement to solve these two problems. I bought three of them, so I would have them on computers cell phones too.

  I installed the LX-3000 CD according to the instructions. Then I plugged in the USB cable to connect the headset/microphone.

  The sound of the headphones was superb. The boom Mic on the headset is a huge improvement over those built in monitors or webcams.

  Mute the Mic and speaker volume up/down on the cord of the LX-3000 is a convenience too.

  Use the headset no sound PC speakers. So, the echo is therefore more a problem.

  Use of the helmet, it is not necessary to mute the speakers. They are now closed all the time now. So, I go live, make an announcement, then play a prerecorded segment.

  That's where everything went south.

  I take off the headphones so I can take a coffee. I realize that now, I have no way of controlling the segment recorded through the speakers. I have no way of knowing when the segment is about to finish and I need to rush to the computer to make the next segment or live announcement. Being attached to the PC by a foot 3 cord isn't good at all.

  I try to do what I did with the analog headphone. Unplug the headphones to re - turn the speakers.
  No luck there. The speakers are still silent.

  I plug the USB headphones in. NOW I have no sound through speakers or headphones. The microphone in the headphones works well. like the mute of the microphone on the cord of the headset. Reduction in the volume of the buttons on the headset cable move the sliders up and down in the windows sound mixer, but no sound anywhere.

  I re - start.
  Now I get sound from the earpiece. But, not the speakers. All the volume keys on the keyboard, monitor and headset cable + / up and down the volume sliders but have no effect on the speakers or headphones. The helmet is at full volume all the time and PC speakers are silent.

  I look in the Control Panel, "speakers". I see that the 'helmet' has a green check mark and don't "speak". I select speakers and press the button "default". The speakers now have a green check mark.
  No change...
  I reboot...
  Now, the speakers work, but the headphones does not work. Volume controls move the sliders, but do not effect the speaker volume. None of the buttons mute function.

  This is totally unacceptable. The only way to switch between speakers and headphones is through the re-booting the PC and Control Panel. Cannot do when playing a mixture of 15 the second live commercials ads and 30 seconds.

  This is where it gets weird.
  
  While in Internet Explore on the page of mogulus studio, or Flash media encoder, the outgoing audio monitor goes to the HEADSET. If I start another copy of Microsoft Internet explore and reveal my mogulus channel drive, the sound of it goes to the PC SPEAKERS.

  Looking at the volume mixer, I see that if I select the "peripheral" "as speakers SoundMax integrated Digital HD Audio", there is only one application, the 'Sound' volume control and control the sound of the IE. players page.
  If I select "Device", "Microsoft LifeChat LX-3000" I get two Windows sounds and Mogulus Studio applications"

  I get the same results on two laptops from sony.

  NOW FOR THE QUESTIONS.
  OK, so how can I tell Blender what applications go to what audio output?

  Can I set up so that as the studio flash applications will both headphones AND PC speakers.

  Can I make the speaker MUTE button on the keyboard and screen work as they did and set mute the speakers for PC only. That would leave the headphone speakers all the time.

  Except that how can I at least get the +/-and mute keys to work as they did.

  Thank you
  Bob

  Bob, you can proceed as follows which allows different devices to be chosen for different applications in Windows:

  Close all programs, are preparing to open the first program which will use headphones...
  -Right click on the Volume icon and select playback devices
  -Select the headset as default device and open the program that you want to use this device, it will play on the current default device (helmet)
  -Now right click on the Volume icon and select playback devices, set speaker to the default device
  -Open the program you wish to play on the speakers

  The original program will continue to play on the headphones and the second program will continue to play on the speakers.

  Because of the helmet to helmet USB when you unplug them this device is disconnected (uninstalled) completely, she's not as expected with analog headset.

  Where you disconnected the analog headphone the BIOS of the machine would automatically re - routing the sound to the speakers, I do not think, however, that a secondary feature differentiating the speakers in the headphones would be available in the playback devices in this instance.  This is due to the sound card as the primary and the only device in this case and the speakers/headphones being secondary speakers or all outputs simply.

  You will be able to mute/unmute/volume adjustment for all devices in the Volume mixer (the switch A B device with the menu of the device), but I'm not aware of a way to run a stream audio reading by another device using the commands of its standard Windows at this time.

• Problem with the sound & UILoader

  Hello!

  I have a menu with 4 buttons. Each button loads a different SWF file, but I have a problem with the background music that I put on each of these files. As I had to put the music as an audio file of the event, so when the user clicks a different file, the background music of the original file is reading. And I can't put music as a stream because I have the Actionscript code in place he stops just before it even starts!

  The only way I can think to get any is put actionscript in my main menu to control the sounds... I guess I'm asking if there is a code to do no matter what stop music playing when another button was clicked?

  You can stop all the sounds at any time by running:

  SoundMixer.stopAll ();

• AS3: How to access and control embedded sounds in an external swf?

  I rarely use the sounds in AS3/Flash. I use Flash Pro CS6, but I can't seem to understand how access control (play, stop, etc) sounds embedded in a SWF external loading in the main SWF file.

  It is easy to control them when they are incorporated on the main swf. However, on a responsible external SWR, I get all sorts of errors. For this application, I really need to incorporate in the external SWF file.

  I've read several solutions, but none seems not to work.

  I integrate the sound file mp3 called soundSegment1.mp3 tool to import Flash CS6 and then open the properties panel actionscript Flash select the name of the class: SoundSegment1. Can I change the class ID and create a file named SoundSegment1.as, and it saved right next to my document class main.as in the same directory. The code for the SoundSegment1 class looks like this:

  package  {

    import flash.media.*;


    public class SoundSegment1 extends Sound
    {

        public function SoundSegment1 ()
        {
            // no code in here
        }


        public function playSound()
        {
            var soundSegment1:Sound = new SoundSegment1();
            var channel:SoundChannel = soundSegment1.play();
        }
    }
}

  Then, in my main.as, I made several attempts to play this sound such as:

  var fileLocation:URLRequest = new URLRequest(SWFToLoad); 
  loader.load(fileLocation); 
  loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, progressListener); 
  loader.contentLoaderInfo.addEventListener(Event.COMPLETE, completeListener); 
  loader.contentLoaderInfo.addEventListener(Event.INIT, initListener);  
  
  function initListener(e:Event):void // I also placed this code on the completeListener and it didn't work 
  { 
       loader.content.soundSegment1.playSound(); // doesn't work.  
  }

  I get:

  Line XXX 1061: Call to a possibly undefined method playSound through a reference with static type flash.display:DisplayObject.

  Otherwise, I also read that I should be able to do something like this anywhere in the Main.as file:

  var theClass:Class = Class(loader.content.getDefinitionByName("SoundSegment1")); var theSound:theClass = new theClass(); theSound.play()  //doesn't work either.

  I also tried on the completeListener:

  var TheClass:Class = e.target.applicationDomain.getDefinition("SoundSegment1") as Class; 
  var theSound:TheClass = new TheClass(); 
  theSound.play()  //doesn't work either.

  I get:

  ReferenceError: Error #1065: Variable SoundSegment1 is not defined. at flash.system::ApplicationDomain/getDefinition()

  I'm stuck and I really need this to work. I would really appreciate your help.

  Thanks in advance for any help provided. I really need to make it work, because I can not simply incorporate into the main SWF or load them individually outside one by one.

  Thanks again!

  
  

  You can use the load and loadCompleteF below:

  var SWFToLoad: String =...;

  var s:String = "SoundSegment1";

  Load (SWFToLoad, s);

  function load (urlS:String, classS:String) {}

  var ldr:Loader = new Loader();

  ldr.contentLoaderInfo.addEventListener (Event.COMPLETE, function(e:Event){loadCompleteF(e,classS);});)

  LDR. Load (new URLRequest (URL));

  }

  function loadCompleteF(e:Event,classS:String):void {}

  var loadedAppDomain:ApplicationDomain = e.target.content.loaderInfo.applicationDomain;

  var C: Class = loadedAppDomain.getDefinition (classS) in class;

  var instance: * = new C();

  Sound (instance). Play();

  }

• I have reset firefox and lost control of the sound icon

  Using a laptop hp compaq. A get the slow start, so reset firefox. After reset, have more control icon in the bottom right of the screen. Other icons are still there. (State of the battery, windows sidebar, etc.) Have no sound.

  Hello

  Please follow what to do if Firefox won't play all the sounds section to solve your problem.

  Thank you

• the volume control of the sound both play at the same time

  Hello...

  I want to separately control the volume of sounds

  I used a VI of its volume, but it reduces the volume of these two sounds,

  even if the ID of the task of both played sounds are provided separately.

  Please help me for the same...

  Thank you.

  If I'm not wrong, its volume will set the system volume. So, it does not depend on "audio files". I think so...