Satellite A100-784: could not find a FN combination to control the sound volume

Similar Questions

• Windows could not find a certificate to log on the network

  So I try to connect to the network that appears, and then trying to connect but it with "Windows could not find a certificate to log on the network. Now, I tried unchecking security in the properties box and also to uncheck it to 'use windows to configure my wireless network.

  NONE OF THESE WORK FOR ME!
  Also attempted to fix the network, but he says that "windows could not finish repairing the problem because it is impossible to perform the following action: connect to the wireless network '"
  I am currently under SP2, but in the process of installing SP3.
  Help!

  This error usually occurs because you have specified a connection protocol 802. 1 x.  You must configure your properties to uncheck this box.  See the following article:

  "Windows could not find a certificate to log on the network.

  <>http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Networking/window-was-unable-to-finad-a-certificate-to-log/f68d2ea6-51c4-4B86-a5de-da4d06afb50a >

  HTH,
  JW

• Error "Windows Media could not find a certificate to connect to the network" when connecting to a secure wireless network with WPA2.

  Original title: I'm having a problem trying to connect to a Windows XP SP2 to a wireless secure with WPA2, had this error "Windows Media could not find a certificate to connect to the network.

  Not Applicable

  Hi StheveOses,

  As Cameron O have rightly said, you must have Service Pack 3 and other important updates installed. If you continue to experience problems with the connection to the wireless network, you will have a quick glance at this article.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  (Works for Windows XP SP3 as well)

  I hope this helps.

• error message: "windows could not find a certificate to connect to the network.

  My NetGear wireless icon shows this error message "windows could not find a certificate to connect to the network.

  Hello

  Did you change your computer before this problem?

  You can follow the procedure in the article.

  Unable to connect to the network: Validation and certificate in Windows XP and Vista errors

  http://KB.NETGEAR.com/app/answers/detail/A_ID/7334/~/unable-to-connect-to-network%3A-validation-and-certificate-errors-in-Windows-XP

  Alternatively, you can contact Netgear support to improve assistance in this regard.

  Welcome to the NETGEAR support

  http://support.NETGEAR.com/

• Internet connection issues "Limited or no connectivity." and "windows could not find a certificate to log on the network.

  I'm so unable to connect to the internet?

  Hello.

  I'm so unable to connect to the internet.

  Since I've renamed our WiFi network and add a WEP key, I have problems with wireless connection on my
  Windows XP computer desktop, which is a Dell Dimension 4700.

  The questions that I get connection are...

  "windows could not find a certificate to log on the network.

  "Limited or no connectivity."

  I did all the solutions I could try to fix the connection problem!

  1. once I received the message "limited or no connectivity", I click with the right button on the connection and click on repair. It is not always connect for me and I got the "limited or no connectivity message.»

  2. then, I disabled the network connection and then enabled. That no longer works.

  3. I tried to withdraw from the ordered list of connections, and it still doesn't work.

  4. I checked the driver manager, and initially the Ethernet driver was outdated and missing of its pilot. He had a yellow question mark with a black sign and yellow with an exclamation mark inside.

  5. I used DriverZone, downloaded the driver, installed and rebooted the computer after the installation of the it. Apparently, it worked. But I could not always connect.

  6 I have ensured that I entered the correct WEP key, and then adjust the settings correctly. I did it like 10 times in a row and would not always connect.

  7. I tried to go to the command prompt and typed in IP Config/All and that's what I mean.

  Windows IP configuration
  Node type: unknown
  Active IP routing: no
  WINS proxy enabled: no
  ETHERNET connection to the Local network card
  State of the media: Media disconnected
  Description: Intel PRO/100 VE Network Connection
  Ethernet card 2 wireless network connection:
  Suffix the connection-specific DNS: (EMPTY)

  8. after that, I typed the command: ipconfig/release
  and then I got this error...

  No operations can be performed on the connection to the local network, although it has its media disconnected.

  9. after that, I tried Googling for some solutions, and the solutions I found were not any use.
  A solution was

  10. opening of Services...
  Start | Run | Type: services.msc | Click OK |
  Scroll down to and double-click Client DNS | Set to automatic on startup
  type |
  Click apply | Click the Start button | When it starts, click OK
  Do the same for the DHCP Client.
  Do the same for the remote procedure call (RPC).

  and it still doesn't work.

  11. when I look in the menu network connections, I see my connection with a lock on the side, with a red X under the lock and key. In the description, I see not connected, protected by a firewall. How could I remove the internet connection firewall? I disabled the firewall and that did not work.

  12. I tried to uninstall and reinstall the network card and who does not work either.

  It is not the network itself that is the problem.  It is not the modem or the cable. There are no disconnected son or something like that. We have other computers in the House and the internet works fine on other computers. As I said, since I renamed our WiFi network and added a WEP password, I had problems with connecting to my Windows XP computer.

  My computer has updates that must be installed as well. Updates would fix the problem? I just need to have internet.

  What should I do? Thank you for your time.

  Sincerely,

  Justin

  Have you tried to set the value of the link speed/duplex mode? I had the same problem you describe. Your card is only capable of 10/100 communication.

• NO wireless network connection - message "Windows could not find a certificate to connect to the network Shaida. How to fix this problem?

  I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.

  Shaida is my wireless modem.

  How to fix this problem?

  Before the resumption of connection Internet worked normally.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• Unable to connect on the internet on another computer - "Windows could not find a certificate to connect to the network (named).

  When I try to connect to internet on my other computer I get a message saying "Windows could not find a certificate to connect to the network (name)". It's only since I've had a second computer as it does on my old computer which is

  a laptop HP Pressario with Windows XP Home Edition. Someone told me to go to authentication in wireless networks, but can highlight something here as everything is gray.

  Hello

  · What type of encryption do you use on the router?

  · You have the latest drivers for your wireless network card?

  Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.

  a. Click Start, then select run.

  b. term ncpa.cpl type dialog box and then click OK.

  c. right click on wireless network connection icon and select Properties.

  d. click the wireless network tab.

  e. click on the properties button next to remove it.

  f. click on the Authentication tab, and then clear the authentication 802. 1 x IEEE select this network check box.

  g. click OK to update the settings.

• Setup failed: Setup could not find a device supported to write the image of the system of

  Hi, I just downloaded VMWare ESXi 3.5 and I can't seem to install on my system. Error, it evokes, installation could not find a support designed to write the ESX 3.5i system image, what device should I see, I have a hard drive works perfectly installed what should I?

  all responses appreciated

  Kind regards

  Mykola

  Take a look at these.

  http://www.VM-help.com/ESX/esx3i/Hardware_support.php

  http://www.VM-help.com/ESX/esx3i/find_PCI_ID.php

  http://www.VM-help.com/ESX/esx3i/ESXi_install_to_IDE_drive/ESXi_install_to_IDE_drive.php

• Satellite A100-784: where to find his virtual for XP

  Hello everyone,

  I'm new here and this is my first post in hopes that I can give something new...

  Satellite A100 - 784 PSAANE, I had and bought again Windows XP Professional, instead of the basic Vista...

  I have all the drivers on the Toshiba web site except the virtual sound effect...

  So... Please... I need the file coz this function doesn't help in my laptop...

  Thanxx a lot in advance...

  Hello
  I checked the page European driver of Toshiba and it seems that the Virtual Sound Utility is now available.
  Check the page again and download the right ;)

  Best regards and enjoy your new machine ;)

  Good bye

• Equium A100-320: could not find the drivers for W/Lan and Lan to XP Pro

  Help!

  I installed xp Pro on a laptop of friends (at his request), but I can not find driver that work to install the lan and w/lan.

  I tried the intel lan drivers but they do not appear that to uninstall, the material has the normal yellow question? against it.

  I'm having the same problem with the w/RL, or pickup w/local network after installing drivers. It makes no difference if I install the management software either.

  I have mucked for hours, but just cannot get to be detected and work.

  Any help would be appreciated.

  Thank you

  James

  Model is an Equium A100 - 320
  PSAABE - 00J00HAV

  Hello James

  All the drivers, tools, and utilities are the same for Windows XP Home edition and professional home. Please visit the Toshiba download page and download all the stuff from there. Make sure which model of laptop, you choose. It must be the PSAABE model.

  Before you start facilities, reading document installation instructions and install all things in order. All that s!

• Equium A100-027: could not find the drivers for Windows XP

  Hello
  I bought an equium A100-027 and, because of my work, I want to use a personal OS XP - Pro, I bought the retailer 2006 Microsoft.
  The problem is that XP installs successfully, but I can't find the drivers on the Toshiba Download Page.
  The laptop TYPE is witch PSAAQE is not listed. I tried to use the drivers provided by other series A100 PSAAxxx but XP does not accept. I managed only with the Intel graphics driver... How can I do?
  I sent a mail to support Toshiba in France and they redirect me to the download page of drivers even DO NOT contain any driver for my laptop... (it does not appear there).
  It is mandatory for me to use XP - Pro, because we use it for industrial automation, so I can't use Vista! seriously, I bought a PC that do not work on XP?

  Best regards
  A.Lazreg

  Hello

  You re right. I also checked the site and don't find your notebook in the series.
  Hmm you have tested other drivers Equium A100 series but also check the Satellite A100 series pilots.
  The Equium A100 Satellite A100 and very similar specifications and possibly some drivers will also work on yours.

  Toshiba Canada also provides different drivers. Take a look at this page:
  http://209.167.114.38/support/download/ln_byModel.asp

• Satellite L350 - 16L: could not find the SATA drivers to install Win XP Pro?

  I want to install XP Pro.
  Can not find a driver for a SATA drive. nLite will incorporate into xp driver SATA and install XP and then install any driver and the program.
  You will connect to the SATA driver, please

  I don't know who is right.

  Thank you

  Post edited by: splicanin

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39465

  Jimi posted a link to the worm: 8.6.0.1007 Intel Matrix Storage Manager, which includes the necessary SATA drivers!

  Good bye

• Error: could not find c:\windows\idew321.dll in the beginning upward

  This error at the end of the boot.  Cannot find any references to this dll through Google searches.  I got infected with a virus called system tool and wonder if the virus is still there, looking for this dll.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• Satellite U400-17R: could not find an offer of Win7 update on Web page

  I have a Satellite U400-17R PC model.
  Long ago, I consulted my PC support page.
  At that time I could UPGRADE my Vista to a Windows 7 BUT at the time I didn't not a credit/Visa card "valid."

  Now, I have a valid Visa so I would get an upgrade from Vista to 7.
  The problem is that I can't find my upgrade page or support page.

  I am ready to buy the 7 «Toshiba» upgrade

  Can anyone help?
  Where can I buy a 7 at Toshiba upgrade? (Online from their official website of the MIDDLE EAST)
  Where can I find my support page?

  NOTES: I bought this U400 with a Toshiba distributor in the Middle East...

  Hi DarknessSx,

  I think the upgrade is finished now, as wrote Akuma. This option is available only for some time and that time is over now.

  If you want to upgrade to Windows 7, you will need to purchase a copy of Microsoft. With this disc you can upgrade from Vista to Windows 7 too.

• Satellite A100-784: could I use driver Nvidia on the graphics chip Intel

  Hi all

  I know that this particular laptop uses the graphic intel GMA 950. Why then were the nvidia drivers on my laptop as well during the installation of the OS (Vista Basic)?

  I visited the Toshiba website for updated drivers up-to-date, and once again, I find drivers nvidia on the download page.

  What day if I need to update the drivers graphics? Drivers Intels GMA, the nvidia drivers or both?

  Thank you

  Hello

  You're right: this laptop uses Intel 945GM graphics card.
  BUT it seems that Toshiba provides this A100 series with different graphics cards (Inel, nvidia, ati) and so the image of Vista includes 3 different drivers graphics: NVidia graphic driver, ATI and Intel graphics driver graphics driver.

  But if you want to update the graphic card driver, you have to choose only the Intel driver package