Controll on hypersensitive laptop after new installation

Similar Questions

• Symbol ban after new installation on new SSD

  Hello

  A few months ago, my original HD failed (MacBook Pro (13-inch, mid 2012)).

  I decided to replace it myself with a SSD instead.

  the thing is, every time you start, I get the symbol ban for a few seconds until sometimes for hours, but once the start is done - everything works perfectly.

  tried to replace the disc SSD 3 times now - the same result after each new installation of recovery of the internet.

  Currently, using SanDisk Ultra II 240 GB.

  Any suggestions?

  Thank you!

  The symbol you see means that the computer did not find a bootable system disk and sometimes occurs when you have not set up a default startup disk. Go to System Preferences, and then select Startup disk. You should see your SSD in the window. Select it after you unlock the preferences.

  The strange thing is that, if this is your problem, it must be solved in seconds - certainly not hours. This would suggest there is something more complex. You say that you tried to replace the SSD 3 times. Different drives? Different manufacturers?

• missing drivers after new installation of w7 Ultimate 64 bit on HP Pavilion

  The title says:

  "pilots missing after the new installation of w7 Ultimate 64 bit on HP Pavilion.

  It is a Pavilion dv6 1341eo.

  The missing drivers from, said hwat Device Manager is:

  Base system device

   

  " Bus PCI 6, device 0, function 1 "

  Hardware ID:

  PCI\VEN_197B & DEV_2382 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

   

  Peripheral basic system (2)

   

  " Bus PCI 6, device 0, function 3 "

  Hardware ID:

  PCI\VEN_197B & DEV_2383 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

   

  Peripheral basic system (3)

   

  " Bus PCI 6, device 0, function 4 "

  Hardware ID:

  PCI\VEN_197B & DEV_2384 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

   

  Unknown device

   

  ' on Intel (r) "ICH9M LPC-interfacecontroller - 2919".

  Hardware ID:

  ACPI\ENE0100
  * ENE0100

   

   

   

  Anyone please... Here is the driver for these devices?

   

   

   

  Hello:

  The first group of ID you posted with 197B is the JMicron card reader.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75661-1&CC=US&DLC=en&LC=en&os=4063&Product=4049954&sw_lang=

  The other is the ENE CIR receiver that needs a driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75664-1&CC=US&DLC=en&LC=en&os=4063&Product=4049954&sw_lang=

  Paul

• Get the popup to the activation of Windows 7 after new installation

  I used my actual activation key after a new installation (not an upgrade) of W7 on full CD/DVD with sticker. It seemed to work but I keep getting harassed to activate because the key is supposed to be invalid. Experiment with the options I tried to "Buy a new key online." which took me to a site Web of MS page that CITES "because it is installed on your Windows PC is authentic", etc. Something is wrong, but what?

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• How do we install CS4 on laptop after the installation of the new operating system

  How can I install CS4 on my Macbook Pro after I installed a new OS on my Mac?  Also, I have the original CD, but my new Mac is not a CD player.

  Thank you

  Jimmy.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Not able to connect to APEX Administration Services after new installation

  Hello

  I installed oracle database 11g (11.2) and apex 4.2.3 in my laptop.  I did all the steps and now I'm at the stage

  "Create a workspace and add users of the Oracle Application Express".

  When I'm starting to apex, I get just blank page.  Don't know what the problem is.  If anyone can help.

  http:// localhost : 8080 apex_admin/apex/apex_admin

  There's no problem in logging into Oracle.  I faced a problem when setting up "Embedded PL/SQL gateway.  Not sure if this causing issues while opening apex.

  . Loading images directory: C:\Anand\APEX\apex_423\apex\images

  Created directory.

  declare

  *

  ERROR on line 1:

  ORA-22288: file or LOB FILEOPEN operation failed

  The system does not have the specified path.

  ORA-06512: at "SYS." XMLTYPE", line 296

  ORA-06512: at line 16 level

  PL/SQL procedure successfully completed

  Thank you and best regards,

  -Anand

  Hi Jariola,

  Don't know why my my configuration of the embedded PL/SQL gateway failed after repeated tests.

  I uninstalled APEX completely and then kept my "apex" installation folder under "c:\temp".  Then run under-

  @apex_epg_config.sql C:\temp

  This time he succeeded without any problem.  I am now able to connect to the apex

  The only change is the folder when I kept my installation of apex.  Earlier, it was "C:\Anand\APEX\apex_423" and now "c:\temp\apex".

  Platform

  APEX version: 4.2.3.00.08

  DB version: 11g Release 11.2.0.1.0

  Web server: EPG

  System operating system: Business Windows 7 64 bit

  Browser (s) / version (s): Google Chrome: version 31.0.1650.57 m

  Thanks to all who tried to help.

  Kind regards

  -Anand

• DC Adobe will not open after new installation

  I just did a clean install of Adobe Acrobat Standard DC and it will not open after installation on Windows 7 Enterprise. It's also does not give me that whole EULA prompt.

  Right-click on the exe > click 'run as administrator '.

• Unable to connect to the URL of planning after new installation & configuration 11.1.2

  I installed 11.1.2 on Windows 64 bit environment and configured.
  
  This is my environment:
  Box 1. FS, Essbase, Weblogic, Oracle HTTP. Successfully set up and works great no problem (I don't not configured web server in FS yet)
  Box 2. Planning. Installation and configuration was successful.
  
  Question: but unable to connect to the URL http://servername:8300/hyperionplanning/logon.jsp and http://servername:19000/hyperionplanning/logon.jsp (I'm not expecting 19000 will connect)
  
  Trobleshooting:
  When executing netstat, 8300 does not run on this box.
  Also configured to 'Manage the clusters of planning' with no luck.
  The WebLogic (11g) server indicated State planning is unknown.
  Diagnosis indicates: 1. There is no 2 System-jazn-"Data.xml" file. Web application for planning has no reason of error: java.net.ConnectException: Connection refused: connect
  I stopped and restarted service app planning several passages of time without any problem but unable to connect to the URL and no port is running.
  Journal of planning does not reveal the error messages.
  EMP system log shows ServletContainerAdapter manager not initialized successfully
  There is no error in start-HyS9Planning - out .log.
  Start-HyS9Planning - error.log shows the requested service has already been started.
  
  There is an error in the validation log:
  
  [2010-10 - 06T 10: 18:23.171 - 04:00] [EPMVLD] [ERROR] [EPMVLD-02017] [oracle. EPMVLD] [tid: 25] [ecid: 0000Ii1u3V8EcLPMyeU ^ MG1Cf8KW00000E, 0] [SRC_CLASS: com.hyperion.cis.validation.checkers.impl.AppServerChecker] verification code error response: []
  java.lang.Exception: java.net.ConnectException: connection refused: connect
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:153)
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:66)
  at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplication(AppServerChecker.java:159)
  at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplications(AppServerChecker.java:119)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
  at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:243)
  at org.mozilla.javascript.optimizer.OptRuntime.callProp0(OptRuntime.java:119)
  to org.mozilla.javascript.gen.c14._c0(./scripts/webappcheck.js:2)
  to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
  at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:401)
  at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:3003)
  to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
  to org.mozilla.javascript.gen.c14.exec(./scripts/webappcheck.js)
  at org.mozilla.javascript.Context.evaluateReader(Context.java:1119)
  at com.hyperion.cis.validation.RunningEnviroment.processSource(RunningEnviroment.java:222)
  at com.hyperion.cis.validation.RunningEnviroment.runScript(RunningEnviroment.java:279)
  to com.hyperion.cis.validation.RunningEnviroment.access$ 000 (RunningEnviroment.java:40)
  to com.hyperion.cis.validation.RunningEnviroment$ 1.run(RunningEnviroment.java:132)
  Caused by: java.net.ConnectException: connection refused: connect
  at java.net.PlainSocketImpl.socketConnect (Native Method)
  at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
  at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
  at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
  at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
  at java.net.Socket.connect(Socket.java:519)
  at sun.net.NetworkClient.doConnect(NetworkClient.java:158)
  at sun.net.www.http.HttpClient.openServer (HttpClient.java:394)
  at sun.net.www.http.HttpClient.openServer (HttpClient.java:529)
  to sun.net.www.http.HttpClient. < init > (HttpClient.java:233)
  at sun.net.www.http.HttpClient.New (HttpClient.java:306)
  at sun.net.www.http.HttpClient.New (HttpClient.java:323)
  at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient (HttpURLConnection.java:852)
  at sun.net.www.protocol.http.HttpURLConnection.plainConnect (HttpURLConnection.java:793)
  at sun.net.www.protocol.http.HttpURLConnection.connect (HttpURLConnection.java:718)
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:111)
  ... 21 more
  
  ]]
  
  
  What am I not doing?
  
  Thanks for your help in advance!
  
  Published by: VenuRamini on October 6, 2010 07:25
  
  Published by: VenuRamini on October 6, 2010 07:35

  Make sure that the Weblogic password is correct in the boot.properties and restart the services.

  Boot.properties files would be present in D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\\security\boot.properties

  For example,.

  For APS:
  D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\AnalyticProviderServices1\security\boot. Properties

  For Regional service:
  D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices1\security\boot. Properties

  HTH-
  Jasmine.

• Helix Gen 1: how to activate EUFI after new installation?

  I was sick and tired of the obscene amount of space the recovery partition took the my Helix and wanted a new 8.1 instead of an 8.0 upgrade facility. I had a lot of issues with my Helix of USB boot, until what the legacy BIOS setting. Once I deleted all partitions and set up windows by taking more than 20 GB of disk space, I'm not going back to EUFI.

  Any attempt to re - activate EUFI is filled with windows not start. If I put it back up the legacy of all the works. Any ideas?

  Argh, can't post the link to the solution.

  Secure boot disabled, but left this time mode EUFI. Use the following guide to configure the USB instead of the Win7 bootable USB/DVD download tool which does not work with EUFI in the propeller.

  www. nikgupta. NET / 2013 / 11 / install-windows-8-1-usb-drive /.

• 4.2.1 - after new installation - GUI admin ACS comes in white

  Greetings:

  ACS server: Windows server 2003R2 (VM)

  Browser: IE 8

  ACS installed 4.2 (0,124)

  ACS immediately installed 4.2.1 patch top on 15

  Server restarts for launch services

  All the service started except CSAdmin - who started manually

  GUI admin opens to a blank page.

  Any ideas?

  Thank you.

  Hello

  Please, trust the site in the browser. Also make sure that java is the last on the machine.

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• Can I request a new installation for Vista disk and drivers of my laptop after formatting my hard drive?

  I have a stubborn reality and impossible to get rid of the virus on my main hard drive and I think to format and to nine.  I want to know if there is a way to get a new installation of Vista for a clean install disc and a disk for the drivers of my laptop.

  Other info: number of grain of Vista is ripped but I have the model number for my laptop if that should be necessary.

  Hello

  After you have lost your product key shrinks your methods

  key finder programs won't asssit you if it is preinstalled

  Here are the different ways let you reinstall vista;

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I can not activate a new installation of 9 items on my laptop (after a crash).

  I can not activate a new installation of 9 items on my laptop (after refurbishment). I have no other installs of this product.  If possible, please cancel all activations of Elements 9.  Lightroom has been activated without problems since I was able to uninstall it from the laptop.

  If you receive a message that you have exceeded the amount of activations allowed for Photoshop Elements 9 then please contact our support team.  You can reach our support chat at http://adobe.ly/yxj0t6.

• Function of scrolling of the mouse after a new installation.

  Hello, when I got my laptop (m6 1125dx Envy) I had a nice feature that allowed me to scroll through the pages under the mouse cursor when the page is the subject of a scroll is not the current page. It was great when look a things side by side and comparing elements. Having to click on a window to make it active just to scroll is a pain. This is a default feature in ALL linux distributions and I missed a lot when I'm on windows.

  When I got this laptop windows 8, I found that I had this feature. I was happy to extreally. After awhile, I reloaded my operating system with a new installation of windows 8 and noticed this feature is now gone.

  I installed all the drivers and the software that was in the file "c:\SWetup". I've updated all the drivers from the HP website. Still no scroll mouse of pages under the cursor.

  I know there are applications of third party like katmouse and others who do this, I tried them and they do not seem to work in windows 8.

  It's something that came with the laptop. Can someone give me a helping hand for this feture back?

  ChangedSoul,

  You can enable mouse Hover in two ways:

  Windows key + U (open access) >

  If you have not previously opened the ' Centre

  then

  Uncheck both "always read this section aloud" and "always this section analysis.

  Select / Open "Make the mouse easier to use" >

  Under "Make it easier to manage windows" section >

  CHECK "Activate a window by hovering over it with the mouse.

  Ok

  -----------------------------------------------------------------------------------------------------------------------------------

  Comment

  This method should work, and if this is the case, it will also be enable the development by mouse and POP before the window where you point your mouse.  Frankly, I find it irritating.

  More likely, because you're in the Linux world, looking for likely action "Set mouse without Pop" first defined in Unix all these years and then moved to Linux as the obvious of the window control decent method.  Yes, I'm a little prejudiced, but only a little.  The smile.

  Glide mouse (no window pop) to Windows 8 is easy to configure. It requires a simple registry hack to set the mouse Hover in place.

  Windows key + R > regedit > OK

  Once you have full registry > export a copy of the register to your favorite folder

  Open key HKEY_CURRENT_USER\Control Panel\Mouse

  Change the value of REG_WORD ActiveWindowTracking to 0 × 0000001 (1)

  Open the key HKEY_CURRENT_USER\Control Panel\Desktop

  Change the value REG_BINARY UserPreferencesMask, MSB (most significant byte or the first value in the chain), at 01

  Example:

  The FIRST value of the string can be 41, which displays the front window > change the value 01

  The FIRST value is perhaps 9f > replace the value 01

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  OPTIONAL:

  If you want to slow down the reaction of the constant focus, you can add a delay to the duration of the window to change the focus after the mouse is moved.

  Key HKEY_CURRENT_USER\Control Panel\Desktop

  Change ActiveWindTrkTimeout REG_DWORD > a value you like

  Examples:

  0 × 00000080 (128ms)

  0 × 000000c8 (200ms)

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Save and exit >

  Restart / reboot the system and log on

  Fact!

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

• Working Group stopped after the installation of the new wireless router

  My working group stopped working after the installation of the new wireless router.  Router was switched were to move from DSL to fiber optic.

  I have a very simple home with two laptops working group, the two are connected with a wireless router.  A PC is running XP with the updates and service packs; the other PC is Windows 7 Home premium.  This working group was running without problems for a few years.  The Working Group has been used to share files between two laptops.  Internet access was through the DSL wireless router and print was with a wireless printer, without going through the working group.

  I had my DSL set out to free fiber optic last week, which meant that a new wireless router has been installed by my local phone company.  Internet works fine; wireless printer works.  The working group no longer works.  When I try to connect from XP to Win7 and I click on mode workgroup computers, I get this message:

  WorkGroupName is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  The network path was not found.

  I tried to create a new working group, the new name for the same workgroup on both machines, but this did not help.  Working groups are supposed to be simple; This seems to be a problem on the new router - telco tech support says that nothing is stuck on the router. I don't believe them.

  What version of XP you use (Home or Pro)?

  Can you access the Win 7 a XP computer?

  You have identical accounts, passwords on both computers?

  If all that was done was to change routers without making any changes on the computers, the most likely cause of the problem is a third party (other than Windows) firewall on at least one of the computers.  Being by default, a router automatically assigns IP addresses to computers on your local network.  Different brands of routers, but use different address ranges.  For example, Cisco/Linksys routers typically use the 192.168 form addresses. 1.1 with 192.168. 1. 254, while the D-Link routers typically use 192.168.1 to 192.168.0.0. 254.  A firewall configured to allow only the first IP range blocks communication to the scope of the latter.

  So... What is the name and version of your anti-virus program?
  What other security software is installed?

  On every laptop computer, open a command prompt window
  for XP: start > run > cmd > OK
  for Win 7: type cmd.exe in the search box and press enter
  In the black command prompt window, type the following command and press enter
  ipconfig

  Please provide the values for the following for the adapter wireless of each computer
  IP (XP)
  IPv4 address (Win 7)
  Default gateway

• Windows 7 Pro update is not after the new installation

  I know that this question is asked many times, but I tried pretty much everything that is suggested and nothing seems to work, some worked for others, but they have not worked for me.

  I have replaced a failed hard drive on a Lenovo X 200 an old laptop that I was giving away he a son of friends who needed just for the College.

  I stuck in an SSD and saw genuine window 7 Pro licenses as was previously on Vista, I made a new installation as I've done a hundred times before, and then as always update windows first, but I'm just update Windows scroll bar I left it all night nothing happened.

  I tried using the Microsoft Easy Fix times nothing.

  I tried Windows Update Agent still nothing.

  I tried a suggestion here that seemed to have worked for others install (KB3102810) I did as stated on this occasion, he worked told him there are 225 updates and 18 in option more, I jumped in option one it seemed to work very well it installed just 13 with the lack of rest I restarted as requested but recede in windows it says Windows is up to date, that was impossible.

  I clicked on update again and it does what it was originally just to get the scroll bar that I left for hours and nothing, this is seriously my head in, I think that Microsoft is not going like it the impression that I'm being bullied by installing Win 10 and the person wants to win 10 , because they prefer to Win 7.

  Please could someone help me on this pickle was on this thing now for almost 2 days of installation then put in solid form and re install all to nothing does not.

  I would seriously some knowledge on it.

  Concerning

  It was pointed out Alan

  Ken Morely has the solution.   Follow precisely...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/following-a-clean-install-Windows-Update-remains/ff3c442e-79a6-40d3-AC35-29e130cebef1

  I've used several times, as many others have, and it does not have the problem you describe.

  Install all that it offers to the exception updates Windows that are not labeled security and are dated after 2014.  The reason is that all those who since have no value to your system and prepare your system to accept Win10 and provide information to Microsoft.