ControlledAccessException
I install my application through CodeModuleManager.every thing works very well, but at the start of my application throws an exception when it reaches app.addGlobalEventListener (app); and the exception is ControlledAccessException. can someone tell me why I get this exception
Options / Security / Application permissions, the value 'Allow' and try again.
Tags: BlackBerry Developers
Similar Questions
-
Interesting ControlledAccessException
Hey people out there, I get a very interesting ControlledAccessException of the sample code shown here: http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800639/How_To _...
It follows from this line:
ApplicationManager.getApplicationManager().launch("net_rim_bb_appworld?" + myContentId);
The stack trace is as follows:
net_rim_cldc
ControlledAccess
assertRRISignature
0 x 3431
net_rim_cldc-6
ApplicationManagerImpl
0 x 3432
net_rim_cldc-6
ApplicationManagerImpl
0 x 3269
net_rim_cldc-6
ApplicationManagerImpl
launch
0x312F
Never heard of an IPP signature. I signed the sample with signatures RRT, CPR, and RBB. However, I recognize this claim. It occurs when you attempt to launch native applications from the RIM with the api launch.
Has anyone else experienced this problem?
Thanks for reporting this. It is a problem of version 4.5.0 and 4.6.0 BlackBerry device software and has been sent to our development team for resolution.
Pratik Sapra
Mobile Application development specialist
Research In Motion
-
Transport.More () throw a ControlledAccessException when BB bridge is installed
Hello
I have an application which interecepts the specific emails and displays. It was work fine until I had a customer with BB bridge. Enforcement would take only a fraction of these emails, throwing "ControlledAccessException: no unauthorized attempts to join this request."
It only occurs with 6.0 that runs bridge (so far as I know). The full exception is below.
Any ideas?
Name: ControlledAccessException
GUID: 9c3cd62e3320b498
Time: May 12, 2011 04:10:22
No unauthorized attempts to join this request
net_rim_cldc-9 (4D8359F1)
Application
getApplication
0 x 3355
net_rim_bb_email-5 (4D83671C)
EmailMoreRequest
invoke
0x2E4A
net_rim_bb_email-5 (4D83671C)
EmailMoreVerb
invoke
0x301F
net_rim_bbapi_mailv2 (4D836737)
Transport
more
0 x 7834
MobileHighlights (4DC958FC)
InboxListener
processMessage
0x290D
MobileHighlights (4DC958FC)
InboxListener
messagesAdded
0x2A11
net_rim_bbapi_mailv2 (4D836737)
FolderEvent
Dispatch
0x20D1
net_rim_bbapi_mailv2 (4D836737)
ListenerManager$ AsyncFolderListener$ Callback
run
0 x 3312
net_rim_cldc-7 (4D8359F1)
ExternalListener$ SynchronizedCallback
run
0x38EC
net_rim_cldc-7 (4D8359F1)
ProxyRunnableQueue
run
0x7D4A
net_rim_cldc-2 (4D8359F1)
Thread
run
0xAAD0Listener methods are triggered by processes outside your application, which usually have a reduced set of permissions.
Once you have moved the call back inside your own application, apply the set of permissions granted to him and the call was successful.
You should perform some operations as possible in the listener methods.
-
ControlledAccessException when using FilePicker.show)
I am receiving a click on a button and try to show a filepicker. I am also using "UiApplication.getUiApplication (.invokeLater)" to ensure that it is on the edge of the event. After setting the filter, path and earphone "FilePicker.show ()" throw a ControlledAccessException with a null CodeSignedKey.
It is probably important to note that this only occurs on the device, it works in the Simulator.
Any help would be greatly appreciated, I have dealt with this for a while now.
Right, he works on the Simulator, but not on the device.
It is hard to believe that they are testing such things on the device before releasing.
In particular, something like that where they kept touting it as a new feature in 5.0.
-
Hello
I'm a ControlledAccessException while accessing service book records if the Internet permission DENY on device, why?
Thanks for help.
You can raise this issue in the RIM developer Issue Tracker (Jira): https://www.blackberry.com/jira/secure/Dashboard.jspa
Maybe there is a bug, or maybe an application can bypass permission DENY Internet fiddling with Service book Records...
-
NFC NDEFMessageListener - ControlledAccessException again!
Set IV to develop an application that involves a simple NFC tag read.
When I try to add a NDEFMessage listener to a the ReaderWriterManager objectof I
Get the above error!
The code was working fine but when I added the most advanced code he divided the app in
several .cod files, after that reading several posts on this topic, it seems that there is a bug in
the version of the 7.0.0.335 software which has now been corrected in the version 7.0.0.337 (forgive me if these version are not accurate im just recalling the memory).
However im using a device of 9360 with software version 7.0.0.353
and im always getting this error!
After reading the posts, I tried several options with the NDEFMessagelistener... I put it in its own class, I put it in a class of the screen, with the same results... the listener currently resides in the main application class. It was originally (when it worked)
It is the line that does not work, the error is:
the listener:
(NdefMessageListener mMsgListener in overall)
mMsgListener = new NDEFMessageListener() { public void onNDEFMessageDetected(NDEFMessage msg) { try { NFCManager.getInstance().playNFCOperationSuccessSound(); byte[] mByte = new byte[mDataRecord.getPayload().length]; mByte = mDataRecord.getPayload(); //gets the mac address from the payload and dumps it in mMacAddress mMacAddress = new byte[6]; for (int a = 0; a < 6; a++) { mMacAddress[a] = mByte[a + 1]; } } catch (NFCException e) { try { NFCManager.getInstance().playNFCOperationFailureSound(); } catch (NFCException e1) { } UiApplication.getUiApplication().invokeLater(new Runnable() { public void run() { dialogDisplay("Error Getting NFC Tag Data"); } }); } } };
This code takes the listener:
NFCManager.getInstance().enableNFCByPrompt(); mNFC = ReaderWriterManager.getInstance(); //tag type for out mNFC.addNDEFMessageListener(mMsgListener, NDEFRecord.TNF_EXTERNAL, "nokia.com:bt" , false);
I get this in the console:
[693.281] CMM: TapnPrint-2 (27242) No sig 0 x 33
to the point correct the fault and well sure the:
ControlledAccessException
Exception, if there is someone who has solved this problem or knows a solution I'd love help
as it has caused my app to hit a brick wall!
Make sure you only check the post following the correct minimum version necessary to 9900 or 9360 as it has been updated today:
-
weird problem 'ControlledAccessException' to 9800
Hello
I try to update my application to 6.0, but I have a weird problem of Pentecost of certain events.
For example, I have a button what do some in the SQLITE database from the application, in the Simulator works fine, but when to test the same event in the 9800 device I get the strange "ControlledAccessException' its what I have test the same process in strand 2 4.6.1 and 5.0 devices and do not get this error...
This is the code for the listener the button...
FieldChangeListener setParHoyos = new FieldChangeListener() { public void fieldChanged(Field field, int context) { try { dbHandler _dbHandler = new dbHandler(); String msg; msg = _dbHandler.setParHoyos(idcampo , Integer.parseInt((choiceFieldh1.toString())),Integer.parseInt((choiceFieldh2.toString())),Integer.parseInt((choiceFieldh3.toString())),Integer.parseInt((choiceFieldh4.toString())), Integer.parseInt((choiceFieldh5.toString())),Integer.parseInt((choiceFieldh6.toString())),Integer.parseInt((choiceFieldh7.toString())),Integer.parseInt((choiceFieldh8.toString())),Integer.parseInt((choiceFieldh9.toString())), Integer.parseInt((choiceFieldh10.toString())),Integer.parseInt((choiceFieldh11.toString())),Integer.parseInt((choiceFieldh12.toString())),Integer.parseInt((choiceFieldh13.toString())),Integer.parseInt((choiceFieldh14.toString())), Integer.parseInt((choiceFieldh15.toString())),Integer.parseInt((choiceFieldh16.toString())),Integer.parseInt((choiceFieldh17.toString())),Integer.parseInt((choiceFieldh18.toString()))); Dialog.alert(msg); } catch ( Exception e ) { System.out.println( e.toString()); } } };
Ty! all help me
OK solved the problem are asociated to the GET the value
H1 = Integer.parseInt ((String) choiceFieldh1.getChoice (choiceFieldh1.getSelectedIndex ()));
-
App throws ControlledAccessException, but only when the reloaded
A ControlledAccessException can happen when an application is hot swapped in the BlackBerry Smartphone Simulator. You can work around this by restarting the Simulator or loading a different means (browser, javaloader specifying the file JAD or Desktop Manager).
-
Display.screenshot cause ControlledAccessException
I developed an application that involves taking screen shots, using the Display.screenshot () method. It works very well in the Simulator, but I just tried to start a 8120 unit, and a ControlledAccessException is thrown by the method of screenshot. Cod files are signed with keys of the RIM and the device works OS 4.3.0.94, then as far as I can see that the method must be available. I get a lot of messages from the device by not saying "No sig 0 x 33" but as far as I know who is an in-house code of RIM signing key so I don't think that has anything to do with it. Does anyone know why it does not work on the device, but on the Simulator?
You should check the effective permissions on the device. Some of them may default on refuse, even if the application is signed. This is because they represent a significant security risk on the device, event Injection (injection of keys) is one and so is browser filtering. This may also be true for the screenshot on some devices.
To check this setting for your application, go to Options-> advanced-> application Options and look for your application. Once you find your app click menu and change the permissions. Make sure of course not of them are defined on refuse, specifically screenshot under Interactions.
-
ControlledAccessException on RuntimeStore.getRuntimeStore)
We entered an uncaught exception when launching a blackberry app in the House on berries. The error seems to go away after a reset on 8700 battery, but we were getting it ramdomly on the 9000 device (each a few reboots).
The application is built on JDE4.1.0
*************************************
Event log:
Name: ControlledAccessException
GUID: 9c3cd62e3320b498
Time: August 7, 2008 11:25:06
No detail message
net_rim_cldc-12
ApplicationControl
assertIPCAllowed
0x2A87
net_rim_cldc-5
RuntimeStore
0xA165
net_rim_cldc-5
RuntimeStore
getRuntimeStore
0xA179
com_ms_rcdecommon
SMRTLED
getSMRTLED
0x3B30
com_ms_morganphone
MorganPhone
main
0 x 1322
*******************************************code snippet:
public public static SMRTLED getSMRTLED()
{
RuntimeStore rs = RuntimeStore.getRuntimeStore ();
Sleigh SMRTLED = rs.get (SMRTLED_STORE) (SMRTLED);
if (sled is Nothing) {sleigh =
new SMRTLED (); RS.put (SMRTLED_STORE, sled);
}
carriage return ;
}
*********************************
"sled" isn't wrapped with ControlledAccess, why do we ControlledAccessException?
Thank you
June Young
ControlledAccessExpcetions can be thrown if the application attempts to do something it doesn't have permission to do. These parameters can be seen and updated by going to Options, Advanced Options, Applications, select your application and select Edit permissions from the menu.
An application can also query and request permission changes by using the ApplicationPermissions class.
-
ControlledAccessException on addGlobalEventListener
I added a global event listener to my UiApplication. On I tested it on most of the devices, it works well. However, it was just brought to my attention that the call to addGlobalEventListener sometimes throw a ControlledAccessException. I know this means my application requires an additional authorization, but it is unclear what I need. I use ApplicationPermissionsManager at startup to request other permissions, and I would do the same for any permission I need for addGlobalEventListener. None of the constants in his ApplicationPermissions as I want. Any ideas?
The constant of ApplicationPermission.PERMISSION_CROSS_APPLICATION_COMMUNICATION applies to the GlobalEventListener.
-
ControlledAccessException only os OS 4.6
get the ControlledAccessException only in OS 4.6
manager = ApplicationManager.getApplicationManager();descriptors = manager.getVisibleApplications();
any ideas why it happens that the 4.6 OS?
If the user is on a network of BES, José probably a policy restriction. You can check with the administrator.
-
ControlledAccessException while audio playback in the background thread
I have a system module which is a background thread, who plays one of the ringtones pre-installed on the device. It works great in the Simulator, but on my real device (8320, 4.5.0.81, Tmobile), a ControlledAccessException is thrown and of course, plays the audio.
The application is signed code, I tried to set all the permissions of the application to 'Allow' and nothing has worked.
The following code fragment, that's where the exception seems to be happening:
Player p = javax.microedition.media.Manager.createPlayer("file:///store/samples/ringtones/Alarm_EarlyRiser.mp3); p.realize(); p.prefetch(); p.start();
I was hoping that among the people of the RIM (or someone else) could point me in the right direction regarding, why this is happening and how to fix this.
Thank you
Okay... got official word from [email protected]:
"It is not possible programmatically to other applications pre-installed media files read, because they are encrypted DRM"
So that answers that.
-
browser launch application problem
Hello
In order to launch a browser from an application, I used the code snippet of this
page:Everything I do is provide my own url for it and run it. It works very well and has
was working fine until recently. A number of customers complained
receive the following error message:Eception exception: net.rim.device.api.system.ControlledAccessException
In the hunt for the cause, I have tried on a number of different devices.
Including OS versions:Rogers Blackberry 8700 v4.2.1 - works fine
Rogers Blackberry 8800 v4.2.1 - works fine
Rogers Blackberry 8310 v4.2.2 - works fine
Bell Blackberry 8830 v4.2.2 - above displays error
Bell Blackberry 8130 v4.3.0 - above displays errorI tried the device simulators:
v4.2.2.123 Bell 8830
4.3.0.07 uscc 8130
and they both worked fine.We're going a little crazy here trying to figure out the cause. If it's not OS
linked version, maybe that's a problem of provider?
Is there a known issue with Bell relating to the safety of the launch of the browser
applications? Is there a work around?Thank you
OK problem solved. Lancéo has got to me referring to the document that I originally brought it up. I just stumbled on the wording. It did not clear in the document that extract of code belonged to which version. In addition, a some devices running v4.2.2 colleagues was not the problem. Where as the document basically says that she should have. I should still try.
So I have now two versions of the same application. The snippet of code on the bottom of the document
is used for versions 4.2.1 below. Initially, the code snippet is used to 4.2.2 and more.
Thanks again for all of you who have posted.
-
The upgrade of my application fails (when it is registered with PhoneLogs)
I use Desktop Manager to install/upgrade the java application, I am writing to you. My application is configured to run automatically at startup function.
1. when I just install my java application (which means that it is not on the device), it installs and works fine.
2. when I update my application, the phone restarts, fails it application (IE not dΘmarre). More clearly, if I go to the icon and click on it, nothing happens.
3-if I delete the app, reboot the phone and install the application, it is very good (line with scenario 1 above).
I narrowed down it to 1 line of code that makes the difference:
PhoneLogs.getInstance () .addListener (myPhoneLogListener);
If I don't register my app/process with the PhoneLog, upgrading the app has managed in all scenarios. I guess that's because one of my 'myPhoneLogListener' objects is in the memory space of the PhoneLog at the time of the upgrade. Also, my application is running at the time of the upgrade. The application is still running in the background, intentionally.
I would try an OTA update to see if it behaves differently, but I don't have any private location secure to host my app.
How to make this upgrade work, without requiring the user to quit the application before the upgrade; given that I can't guarantee that users will do, and I don't have to have a bad experience with my application.
I'm writing my own solution for others in the future.
So before in my MAIN() method, I capture all the Exceptions and out in silence. This was to avoid the dreaded AppError-200 during development.
So I added a try/catch in my MAIN() to write all the Exceptions in the event on the device log, before to leave. It turns out, I was getting a "ControlledAccessException.
So, I decided to add a Thread.sleep (30000)-30 seconds before trying to run my problematic registration code.
Good news and bad news, it worked. But that tells me that there are a few occurring in race condition. Well, I have no other choice. I hope this helps someone else out there...
Maybe you are looking for
-
How to turn off hide automatic bookmark?
When I went to FF4, I put in place the ability to hide my bookmarks on Firefox tab after 2 or 3 seconds when the mouse is no longer on this subject. It has been very useful for the era, even if it bothered me that whenever it scrolls upwards, some we
-
Updates recent vs list of updates installed; Apparent discrepancy
About the updates that are installed automatically and I have to choose and install, all seem to appear on the list of recent updates and are marked "successful." Yet, all are on the list of installed updates. This week I installed IE9 and somethin
-
Is there a way to change my email address on my gamertag?
I left my parents House, and I made my drive hard xbox because my roommate brought his xbox. Unfortunately I can't sign on xbox live because yahoo said e-mail was lost and there is no way to reactivate, in addition to that I don't know the password t
-
How to change the profile picture of windows 8 by default
Hello Is it possible to get the original image of account that came with the account until I changed it? The person...
-
HelloI've updated a few existing Images on assets > library > Image, but he doesn't think, where it has been used?Thank youSanjiv