Controller touch pairing timeout

Similar Questions

• E7450 processor and controller keyboard backlight Timeout

  First post so Hello to all... !!

  Try to fix the keyboard backlight timeout on my E7450 processor and controller Latitude but could not find the setting, nothing in the WOODS or mobility settings.

  Can anyone help?

  Thank you

  You can try to download the Dell development Pack, E7450 processor and controller is not listed as compatible, but it might still work. Once installed follow these steps:

  1. go in Control Panel

  2. depending on your configuration.

  a. If you see selected category material selection and then Dell keyboard backlight sound settings and change the option "disable the backlight in ' to the desired option. Click on apply.

  b. If you saw icon selected, choose Dell keyboard backlight settings and change the option "disable backlighting in" to the desired option. Click on apply.

  The backlight then only released depending on your setting

• Codec C40 - remote control / Touch Controller [a]

  Hi all Experts TP,

  I just bought a C40 and put in place. I have the "remote control" and "tactile controller", that are put in place normally and can

  particularly well-run.

  But who cannot work together, this means I plugged the 'remote control', then the controller 'touch' cannot be used and I plugged the controller 'Touch', then the 'remote control' cannot be used.

  I can only use one or the other controls?

  Hi Fai CHi,

  Yes, you can use a single device at a time.

  Best regards, Ahmad

• Cannot configure the static IP address for Cisco Touch 8 "

  Hi all

  I found that I can not configure the static IP address for Cisco Touch on TC7.0.1 / 7.0.2 with the procedure described below.

  1. upgrade a codec (e.g. SX20 TC6.3 or less) and a touch paired with the codec for TC7.0.2.

  2. after the upgrade, désapparier (with the help of désapparier Touch button) touch and it reboot.

  3. tap on "IP settings."

  4. Select "Manual IP allocation".

  5. Enter the IP address, subnet mask, default gateway, and then press "Save".

  Even though we have configured the static IP address with the above procedure, IP allocation remains 'Auto' (= DHCP) and the IP address, subnet mask, default gateway is also empty.

  In this situation, the only way to configure the IP address for the Touch is to use the DHCP server.

  I guess many users uses the static IP assignment like us, so please fix it as soon as POSSIBLE.

  Best regards

  Kotaro Hashimoto

  Hi Kotaro,

  It is a known problem in TC7.0.1 and TC7.0.2. The id of the bug is CSCum82147.

  To work around the problem, set IP address you want the button before moving on to TC7.0.x.

  The bug has been fixed and will be included in the next version of the TC software.

  Kind regards

  Jonas Tysso

• HP Pavilion Notebook - 17-f125: HP TOUCH FOR MOUSE HP PAVILION 17.3 PAIR CONNECTIVITY PROBLEM

  I have the HP touch and pair of mouse and the laptop can not find it... What can I do?  I press the bluetooth button.  on the mouse and a analysis of the laptop new devices and I get nothing.  Help!  I can not even find the option bluetooth on your laptop to see if it is enabled or disabled.  I used help on the laptop... did not help

  @suitestorm1 ,

  Hello and welcome to the forums HP support thank you for posting.  Heres are some links for you so that you can provide us better so that we can help you better.

  The question of best.

  Complete model and product number.

  Please provide your operating system.  The reason why we are looking for the product number must match your exact product.

  Now for your problem of bluetooth.  This next links will help in solving the problems of bluetooth.

  Using Bluetooth (Windows 8) devices

  Understand and troubleshoot Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  One thing that I would try before anything is trying to connect to your bluetooth device to another system to see if it works on another system as well.

  Please let me know how it goes.

  Thanks again for posting and have a great day.

• Toshiba 32AV615DB reduce while watching her without touching the controller

  Hello.

  My TV acts as if there is a sign to extra distance.
  While watching, the sound will reduce without touching the controller.

  It is not possible to market. It will scroll together various displays.
  Buttons on the side of the TV do not work.

  You can activate the TV market, sometimes who will work for a while!
  Another day, it will work perfectly.

  Any suggestion is welcome.
  Thank you

  I found a thread that describes a very similar TV acoustic behavior:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=70847

  It seems that the Dynamic Volume is enabled in the settings of your TV.

  + Audyssey Dynamic volume® control volume levels in order to eliminate the strong points and lift the soft dialogue for film and television more enjoyable viewing. +
  + In the sound menu, press up or down to select Dynamic Volume. +
  + Press left or right to select On or off.

  Check it out. Maybe it helps.

• HP Touch to pair cells of mouse (H4R81AA) economy mode

  Hello

  I don't know if anyone can help me, but I brought a HP Touch mouse (H4R81AA) of the pair & use in conjunction with a laptop running Windows 7 Professional operation.  I have configure everything with the mouse and laptop computer, and the mouse works, but frequently stops working until I'm back on reverse button to the 'off' position and then '' they ''?

  Is there a setting for the HP Touch to pair of mouse (H4R81AA) to adjust the length of time before it goes to battery save mode or stops working?

  Thank you!

  BillCincy

  Hello Bill,

  Try this...

  Right-click on computer and choose manage.

  Click on Device Manager.

  Find and right-click the card blue tooth (perhaps under network adapters?), and then click Properties.

  Click power management, and disable "allow Windows to turn off this device to save power".

  It will be useful.

• Touch area does not work in the Simulator controller

  Hello!

  I use the bb Device Simulator.

  Official documentation says that with touch area to the Simulator controller I can navigate from control to control my fi application, I put political correct ficuse for her. But the touch area does not work for me. No event is occure when I do drag and hold the cursor of the mouse on the tactile area, or classic Simulator, not different mouse buttons.

  Tested under Windows 8.1 and Debian Linux with Xorg + awesome wm (and Xorg + mate of).

  How to solve this problem?

  Thank you!

  I tried this using the BlackBerry 10.3.2 Simulator and it worked.  At startup, you choose the default option no 1440 x 1440 Passport?  The Passport is the only BlackBerry 10 smartphone that supports active touch keyboard.  If you use the default startup in Simulator (Z10) the touchpad option does not work because it is not supported by this model.  To change the type, press ENTER when the Simulator starts first.

• How can I re - mouse Microsoft Sculpt pair Touch (bluetooth)

  Running Windows 7

  My Microsoft Sculpt Touch mouse was exploited and inadvertently pairing button has been pressed.

  Now, I can't get the mouse works!

  Now the pairing button for several seconds and try to discover the Bluetooth mouse is not successful.

  I would appreciate advice on how to get the feature to the mouse.

  Y at - it a reset a driver to do?

  (Moved to programs)

  Hi Jack,

  Thanks for the reply. I really appreciate for the troubleshooting steps you have tried so far. The question you are faced to could be due to corrupted drivers.

  Please answer the following questions:

  1. What is the brand and model of your computer?
  2. Are you able to connect any other Bluetooth device with your computer? (phone or Tablet)

  Please follow the links below and check if the problem is fix.

  Troubleshoot failures in detecting new Bluetooth mouse or keyboard.

  http://support.Microsoft.com/kb/811805

  Registry warning:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows?

  Bluetooth devices do not work correctly on a computer that is running Windows 7.

  http://support.Microsoft.com/kb/980396

  Add a Bluetooth device or other wireless or network device: frequently asked questions.

  Refer (why Windows does not detect the wireless device, I would like to add to my computer?)

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Additional information:

  Connect to Bluetooth and other wireless or network devices.

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Add a Bluetooth device to your computer.

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Feel free to contact us if you need assistance with this problem.

• Cisco Telepresence SX20 and Touch 8 Configuration after paired

  Hello

  I successfully connected and combined the SX20 Cisco's Telepresence and Cisco Telepresence Touch 8. Before using the 8 key, we used the remote control instead. As a result, I have two questions about this.

  1. as far as I know, when I use the 8 key, the remote control cannot be used. Is it possible to use both of them?

  2. How can I change the background of my SX20 touch 8? Previously, the remote I can easily choose the background for my SX20. But after pairing with Touch 8, background in my SX20 become a blue large clock. I really want to have a different background but cannot find the way how to change.

  Any help would be appreciated.

  Thank you.

  Sincerely,

  Bagus Hanindhito

  After you connect the 8 Touch, you can still use the remote control, you will need to put on the SX20:

  SystemUnit MenuType experimental configuration: full

  I think that the standard background when using a touchscreen device is what you see, blue with large clock.  However, after the MenuType return in full which will give you the full OSD which is used with the remote and not that of the button, you may be able to change the background then.

• EX90 clock on bottom of touch controller

  Is there a setting and where I took to get the clock appears on the bottom of the 8 Touch connected to a TC6.1 EX90 running.  I have an EX60 and 8 touch the time displayed on the background of the controller as well as what he is facing up in the corner.  I was wondering just because it's easier to see the time with it on the merits, and many of our users are "old."

  Thank you

  Nathan

  Hi Nathan,

  Now that I'm back at work and have checked a few things, I have the feeling that the clock was introduced in TC6.2.

  If you do not have a service contract on your devices, then you're probably out of luck to get anything later than TC6.1 free in the near future.  Pre TC6.1 devices could be upgraded by asking a "free" upgrade because of a Cisco Security Advisory.

  Wayne

  --

  Remember the frequency responses and mark your question as answered as appropriate.

• A timeout occurred while waiting for the host controller EHCI interrupt on answer Async ahead Bell.

  Whenever I put my adapter wireless netgear n150 under heavy load (download of World of Warcraft for example), it will go down to connection and until I restart the computer the adapter usb port is useless.  I dug into the event viewer and found that a timeout occurred while waiting for the EHCI host controller interrupt on the asynchronous response advance doorbell, source usbehci.  This seems to have been a problem with windows 8 I found other threads referencing but I can say that they are pre-release and some actually work solutions have been validated.  I already assured that all drivers, firmware and chipsets are up-to-date and compatible.  ANYONE please help?

  Quick fix I found:

  -try falling back to WiFi G rather than use N
  In my case, it works... is no longer a fall. But not the same bandwidth...

• PCI-GPIB and controller movement legacy Newport Orion-CM - timeout in MAX but not MATLAB

  I kinda a weird GPIB problem which seems to be related to the legacy quirks of implementation of GPIB.  The system I use is an Orion of Newport-CM, which has a controller of electrostrictifs actuator in him as a monitor of power on separate GPIB addresses, but a physical port.  I have it connected via a<= 2m="" cable="" to="" an="" ni="" pci-gpib="" board. ="" i've="" tried="" both="" the="" 2.6="" and="" 2.2="" ni-488.2="" drivers="" and="" both="" act="" the="">

  I found that when I try to query the device through MAX, I can see a SPY OR that the first FindLstn mark 2 units, but expires (probably to try a * IDN? command, because it signals no response).  After that, if I try other commands via MAX or MATLAB, all the GPIB commands time out, so I have to power cycle the Newport before being receptive again.  I tried every permutation of the GPIB driver located in MAX without result - always the same behavior settings.

  Curiously, however, when I use the device only in MATLAB (with the instrument control toolbox), I can have some success, but with delays every now and then are not paralyze the MAX in the same way, it was.  I am able to open the device with:

  mcobj = gpib ('nor', 0, 1);

  fopen (mcobj);

  and query with:

  fprintf(mcobj,'*IDN?');

  data = fscanf (mcobj);

  and get the good * IDN? response.

  In addition, I can do writing and reads the device (with intermittent downtime... I found I need to leave at least 0.3 seconds between commands, which leads to a slow operation).

  It left me speechless.  Of course, it appears the interface GPIB works, maybe slowly, but if I'm not mistaken, the same driver should be usage of communication for MAX and MATLAB, why so MAX time so that I am able to have the operation in MATLAB?  Are there some low level which may be different that I cannot change in MAX or GPIB configuration, but is defined by MATLAB?

  Any thoughts appreciated.  Newport is as usual MOM on obsolete parts, and their job is not much help outside retailer orders GPIB (Nothing on the specifications of the bus).

  Thank you

  Scott

  Thanks for the tips.  It seems that the old Newport is just really, really slow (must be material and mid-1990 s), so he needs a good break between her send GPIB commands.  I installed the 1.7 legacy drivers, and those at least have correctly the * IDN? the device response.  Gpib MATLAB interface is quite simple you can give sufficient breaks between commands to send to the Newport, so in it, I am able to control the time between orders.

  It seems that it is just a matter of a slow device.  I know not what look like the internal FindLstn characteristics and, therefore, why the new version of MAX expires while the old ones do not, but for really old hardware that there could be GPIB read/write in the new pilot who are too fast to actually really old equipment sufficient time to respond.  Thanks again for the input.

• How can I get a controller Bluetooth to pair with my A1-810

  Hi all:

  Once again I need help from the mass.

  I have both a Nyko PlayPad with fully updated firmware. As well as a controller of Moga.

  First Nyko PlayPad, I can get it to sync with my A1-810 through the usual channels using the Instructions of Nyko, and as I said I have the updated firmware updated.

  But when I go to all the games that are supported by Nyko I can use the controller with the default application settings, nor get the controls to change the game interface.

  SO I bought a Moga controller.

  I can get the App hub, which he uses to try to connect with the controller, BUT most of the time it's Pivot can not find your said Moga?

  Or if she makes it past frst step it will come Sync Moga with your device.

  Then the SHIT saying that it does not find my controller of Moga.

  The Frost thing really I do is I can go into the settings of the my bluetooth device A1-810 to synchronize to the top with him.

  BUT without the respective applications providing the Mfg for use with each controller it's FRIGGIN USELESS.

  And for the controller to work ILS be sync'd up through the application of the perspective provided by the MFG.

  The ideas people?

  The next useless Mfg get their own equipment to work as they should.   Thanks: Ricky

  4.2.2 Android is half broken in the management of BT. I suggest to give up...

• vCenter 6 Platform Services controller MultiSite PSC HA pair with F5

  Anyone out there using vCenter 6.0 with MultiSite to the PSC in HA of installation?

  External Windows?

  Thank you

  Jason

  Meaning of multi-site:

  Site A:

  pair of PSC behind the load balancer (LB)

  "A vCenter" addressed to A PSC LB Site.

  Site b:

  pair of PSC behind the load balancer

  "vCenter B" addressed to Site B PSC LB.

  Site C:

  pair of PSC behind the load balancer

  "vCenter C" addressed to Site C PSC LB.

  All sites are in the same SSO domain.