Controlling several scenes with a film

Similar Questions

• Control several cameras with Codec C60

  Hello:

  I have a client who wants to use 3 PrecisionHDMC cameras and with the intervention of content to a codec C60, as well as an AMX control system.

  I understand that there may be only 3 video inputs connected to a C60 both, my question is:

  If I have a HDMI switch which video switches of 3 cameras connected to Video Input #1 the C60 and have that is configured as an input of the CAMERA, how to control the cameras independently?

  I usually sign my AMX for the C60 system RS-232 and send an order which said in effect "Hey C60, 1 camera to zoom before saying" or "Hey C60, say camera 2 to zoom out, etc...

  But in this case, the C60 will be only 'think' it has a camera connected, therefore:

  Can I still send commands via the codec that say things like 'hey C60, say 2 camera to zoom out,'

  OR

  I can "daisy chain" cable between them and simply connect RS - 232 to the 1st chain camera and tell them '' camera 3, zoom ''?

  OR

  Need me a RS-232 connection distinct to each camera and just say "camera zoom out.

  I hope I explained my question quite well, I look forward to your responses!

  Thank you!

  If you want to integrate a bit more flexibility and discreet control, you can add a small matrix of switching in the project (see Extron DXP 44 HDMI) and have then each camera connected directly to the AMX for control. This allows the discrete control, discrete video selection, output preview and the ability to also have a PC or other video source connected (3 cameras and a PC).

  Discrete control is possible with chaining with addressing, but according to the placement of the camera and the distances between the camera the Garland cable runs can a problem and since you have to run the video towards the grid it's easier to run the control back on location as well.

  If you want to use the composting and then the TC console should be used.

• How to put a project with many scenes on one film

  I did on CC ANIMER many projects and which is a scene belonging to a large project. I would like to make a single project to compose different scenes. I try After Effects but I lose the sound and movements inside the symbols. Search for tutorials (I'm an autodidact), but I can't find anything. Can someone help me? Thank you.

  Sovereign wealth funds have a plot of 16,000, even if you have used several scenes. A way around that is to have up to 16 000 frames in a movieclip in frame 1, then the same thing in a different movieclip in box 2, etc. 16 000 frame is a little more than 11 minutes of a regular theatrical film, so in only 10 images, you could have a decent film.

  In the main timeline, you would have a script like this:

  internship. Quality = "best";

  stop;

  function nextone() {}

  gotoAndStop (currentFrame + 1);

  }

  and in the last frame of each movieclip you would:

  MovieClip (parent) .nextone ();

  With this configuration, you can use File/Export/Export video... and here you can choose how long to export to. Under 10, 16,000 frames example, you can type 6667 seconds as the length.

  If these lines of script are too scary, you could have a number of FLAs with up to 16 000 images in each one, do export as the video by using the option "when the last image is reached", to get a vom set which can be chained in any video editor that you use.

  If you have the disk space, it would be interesting by unchecking the option in Adobe Media Encoder, way the video is perfect for when you combine them in your video editor.

  AE or Premiere would do. If the videos just needs to be copied and pasted together, I use QuickTime Player 7 (would need to have a Pro license). Who can quickly combine videos and export it to a single MP4. I don't know there must be other simple video publishers that could be used too.

• _root.gotoAndPlay inside a clip does not work with several scenes

  Hello
  My site is running when I decided to add a preloader, which I placed it in a new scene before the real site.
  Now, I noticed that all my buttons are broken.
  After some research I discovered a button with _root.gotoAndStop (5) inside a movieclip (and there are many of them in my site) no longer works because there are several scenes.
  Is this a bug or is there a workaround? (I use Flash MX 2004)
  
  This file can illustrate the problem.
  Download example
  Thank you

  It's not a bug - it is preventable by doing two things:

  do not use _root

  referencing of images using labels (whatever the scene, they are in!)

• Control through several scenes buttons? Help!

  Hello!

  I'm new to flash, so I started my project using scenes, that I realize I can't work something. I have a "menu" screen which is a map with points on the subject, these points can lead to other scenes with the descriptions of these places. I want to be able to ensure that on the screen of the second point card, which is a button is visible once you have clicked on the first point, watched this scene and then returned to the card again; and so on with the third and fourth etc. Essentially so that you have to go through scenes in sequential order, but always return to the map. I tried to make all the buttons (except the first) visible = false in the scene of the map and then adding visible = true (for each in turn) on the "back to map" button in the scenes appropriate, but this obviously doesn't work because the code is not between scenes. Can someone help me to think of another way to approach this? I have looked at using a document class, but do not fully understand.

  Thank you

  If they are scenes animated, Yes, they will play.  If this is the case, then you can spread them out on the main timeline and still accomplish what you want.

  Scenes can be just problematic things when it comes to their navigation with coded designs, so they are avoided better as entertain.

  You need to do in the case of moving the main scenario is to have a layer for Actionscript that extends the duration of the timeline where you keep the variables of Boolean status for the buttons.  In this way, when you return as part of the map allows you to make the visible buttons you want... these state variables have just a function that goes through all the buttons and sets their visibility according to their status.

• Video clip on several scenes

  I'm new to Flash and have begun to create a Flash document using several scenes. My document contains audio, so I decided to give users the option to show or hide the text of the narrative while playing the file. I use a clip in every scene which is triggered by a button that allows users to drag a box upwards or downwards to see the or hide the text of the narrative.
  
  This process works fine on a base with a scene, but the problem is that when loading a new scene, the story always begins be hidden because it is from the new scene with the new version of the clip for this particular scene. So if a user wants to view the narration throughout the film, they must click on the button at the beginning of each scene to display the text of the narrative.
  
  Is there a better way to handle such a situation, or can I use actionscript to the status of the clip in scene 1 and what to do to set the clip to scene 2 to the State?
  
  Video clips can be extended through several scenes?
  
  I'm really looking for any help I can get on this problem.
  
  Thank you
  
  Jay

  DCCDCU wrote:
  > I'm new to Flash and have begun to create a Flash document using multiple
  > scenes. My document contains audio, so I decided to give users the option
  > to show or hide the text of the narrative while playing the file. I use a clip
  > in each scene which is triggered by a button that allows users to drag a box
  > upwards or downwards to show or hide the text of the narrative.
  >
  > This process works very well on a base with a scene, but the problem is
  > that when loading a new scene, the story always begins to be hidden
  > because it starts with the new version of the clip of the new scene
  > This particular scene. So, if a user wants to view the narration throughout the the
  > film, they must click on the button at the beginning of each scene to show
  > the text of narration.
  >
  > Is there a better way to handle such a situation, or I can use

  Hello

  You can not run video clip through scenes.
  scene means the END of the timeline, clear all - new calendar.
  The narration in the charge level, level is added to the main sequence and can
  run through several scenes without interruption.
  It is pretty much independent.

  --
  Best regards

  Urami

  --

  
  If you want to send me a message - DO NOT LAUGH at MY ADDRESS
  

• Recommend products OR for my application (controlling several instruments at the same time)

  I'm new to Labview, currently only using the trial version.      There is money in my budget to buy control software, but I need to qualify my needs.

  What I try to do is to control several pieces of equipment to test as a single system, which allows me to perform automated on conventional measures

  and digital two way radios.

  Here is a list of the material I want to control:

  First of all, my controller is a & Rohde Schwarz 3 PSL.   Fully GPIB active and ready.  It is the PC control software will reside on.

  Equipment:

  Spectrum analyser Rohde & Schwarz FSEA 30 with modulation analysis package digital option B7

  FSEA 30 second, same configuration

  R & S AMIQ4 I / modulation generator Q (files of the software residing on the PSL3)

  Generator of analog signals from R & S SMY 02

  Agilent E4431B analog-to-digital signal generator

  Agilent E4406A spectrum analyzer/digital radio test set

  E4418B Agilent RF wattmeter with sensor

  General Dynamics R2670B service monitor

  A typical application will be a test of classical radio on VHF or UHF analog channel.

  The idea is to enter pass and receive frequencies through Labview or any software is best suited for the job, as well as modulation parameters.

  and have the following things occur: assume usage of 150,000 MHz with a FM frequency modulated 1 kHz sounds modulated to the deviation of 2.5 KHz

  in total, with your 127,3 Hz subaudible to a gap of 300 Hz

  Test phase of receiver: send commands to control of instrument of Agilent E4431B signal generator.   Level set to-60 dBm.  Set to 150,000 MHz frequency.  Set

  Audio 1 to 1 KHz and audio tone 2 to 127,3 Hz at a level of 8 pecent of your 1.  SD total do not exceed 2.5 KHz.      Inject the test signal into port RX

  on the radio.

  The value R2670B SINAD function, related to the radio via the audio output port.

  Signal level to ramp down to the SINAD falls to 12 dB.

  Increase the level of the signal to the attenuation of 20dB.   Measure the audio distortion.

  Testing of transmitter: using the attenuators appropriate necessary on the analyzers of spectrum, and/or using a switched network of wiring.

  place radio to transmit using above specifications frequency and modulation.    Analyzers to receive on the frequency designated value

  and measure the transmitter specifications, including nonessential radiation measurement and harmonics.    Measure actual output power

  Via E4418B-power meter.

  I use two monitors to perform multiple tests in a same transmission. One is optimized for spectral purity tests while

  the other analysis of modulation characteristics.    Frequency, duration and RBW are defined according to the needs.

  When you test a digital radio, the signal chain is slightly different.  The AMIQ I / Q modulation generator s I / Q outputs are sent to the

  I / Q inputs on the Agilent generator, the power is on to accept external I / entered Q and the FSEA Spectrum Analyzer (an a)

  the) is passed to a preset that implements all relevant digital parameters so that it can be used to directly evaluate the digital transmissions.

  It is not a very developed in the planning system, but I do not know now whether Labview is everything I need or if I'll need to Teststand or another

  software packages.

  I'll probably want to ask for some advice on how to get this set up, eventually.

  LabVIEW is more than capable of this task. That's what it was designed to do. Use the help > find the instrument Drivers to find and install the drivers that you can use to control and read.

  TestStand generally requires the use of a programming language. It runs the tests that you write and provides functionality built for the production of record and report database then you would need to write these modules yourself with LabVIEW fair and some add on box to tools. For a single test configuration, it is perhaps an exaggeration, but it is interesting to watch as an addition.

• I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL

  Hello.

  Here are some files dump of my crashes: http://cid-5cfec8d823e42bd3.office.live.com/browse.aspx/.Documents

  Here's what happens:

  Since June, I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL (Yes, CRQL, no IRQL level), and they are producing at closer intervals. I also notice some changes of office and some sounds to open files that are not have happened before. I run antivirus and malware and found nothing. I did a disk cleanup and defragmentation.

  I also tried to install via Windows updates and everything seems to date. I ran Windows Memory Diagnostic tool, and it found no errors. I ran Windows Startup Repair and got the following note:

  Root Cause found.

  Unknown bug control: one error checking.

  Parameters = 0 x 0, 0x817dc32c, 0x820e8114, 0 x 0.

  After the last crash, I got a message saying that Windows is aware of the problem and trying to fix it. Any ideas?

  
  Thank you in advance for your help!

  Hello

  Uninstall Faultwire and look for the codes manually as needed. The link to troubleshooting blue screen
  page will show you how to get them.

  How old is the system? A real computer store (not the leeks and glances at a Best Buy or other large surfaces)
  Stores) can help to give a proper diagnosis of the machine.

  You can use Safe Mode - repeatedly tap F8 as you start - use to back up your data in a redundant
  way off the machine. Then re-install Windows that "might" help if the problem is software partner.
  Of course, you will need to reinstall your programs and restore the data in the machine.

  Although there are a large number of errors there could be a cause for all. Try to remove ALL power and
  reinstall all the memory cards and cables (at both ends, when possible) - actually delete and replace.
  do not just tight. Clean the dust bunnies (of course those who are for a PC - for a laptop to ensure that)
  the vents are clear). Try using a small fan blowing through the vents to see if heat is a problem.

  Update key drivers - display/video, NETWORK card and WiFi (network), sound (do not forget to check the sound card drivers
  What update because they will often rollback then repeat the installation until the correct version appears), modem
  and all of the other major features, you could have as 3rd party mouse or keyboard.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to change the extensions on several files with Windows 7?

  * Original title: Extentions

  How to change the extensions on several files with Windows 7?

  You hear no doubt, is that your movie software will only recognize certain types of image file formats.  If this is the case, you will need to reformat format files to any format PNG is recognizable by the software.

  Rather than we guess, please identify your «film» software

  Download and install IrfanView, which is a free utility for images.  http://www.IrfanView.com/

  IrfanView has the ability to read a great many formats of image files.  It can also convert image files formats.  And even better - for you - it can do all these things on a batch of files.

  As test, after I installed IrfanView, open one of your PNG files.  Now click on file > save as, and select the 'Save as Type' to be little matter the file type of your movie software will accept.  Save the file.  Make sure your movie software can accept the new file.

  Once you are convinced that you can modify files that you have in a format that you can use, use IrfanView

  File > Batch Conversion/Rename command.  If necessary, see IrfanView help on this topic.

• How to combine several scenes

  Hi, I create an animation that lasts about 3 minutes. What would be the best solution to achieve this, several different scenes with .fla files or .fla file. If the files multiple .fla is the way to go, how would I put them all together later it becomes a movie.

  Thank you very much for your answers.

  Flash has a limit of about 16000 images following each other. This is true whether one scene or more than one scene. A work around is to have up to 16000 frames in a movieclip in frame 1, and play you through the end of the movieclip and then the stage in frame 2, where is the next movieclip. Keep as many people as you need.

  If you work in this way you can export then as Flash video, saying to the exporter to keep export for the duration of the entire animation.

• Controlling the timeline with Touch and ScrollTop: the combination of the two?

  Hello!

  We try to combine the two scrolling on the edge features:

  (1) scrub the timeline with scrolling (to create Parallax), and

  (2) scroll to the bottom of the page with buttons, using scrollTop

  For cleaning of the timeline, we used excellent control calendar of Tim Jaramillo with key code (found here: http://forums.adobe.com/message/5058756#5058756)

  To scroll to the bottom of the page with buttons, we found excellent Heathrowe scrollTop code (here: http://forums.adobe.com/message/4733382#4733382).

  We do not seem to combine these two methods in a way that works. In my example below, the control, the Timeline with Touch code works fine, but the scrollTop button code does not work.

  Does anyone know how to make a scrub of the timeline, combined with navigation buttons?

  Example: http://www.bartmclaughlin.com/scrollTop/stage-scroll_with_scrollTop_v1.html

  Edge project: https://www.yousendit.com/download/elNLcXl0NEhJMHVFTmNUQw

  Any help much appreciated!

  Bart mclaughlin

  I think in the btn1 and btn2 click Manager you have to scroll the scene rather than the HTML and body

  as

  SYM. $('Stage') .animate ({scrollTop: element.offset () .top}, '800'); in btn1

  and

  SYM. $('Stage') .animate ({scrollTop: element.offset () .top}, '800'); in btn2

  Hope this is useful

• Several problems with Adobe Creative cloud app.

  I have several problems with the Adobe Creative Cloud application.

  1 CC Photoshop or prelude CC cross the bar of the 47% during installation. They constantly give me messages "Installation failed". When I click on "Learn more", I like that:

  "Installation failed."

  Errors during Installation. (7)

  More information"

  So, naturally, I click on more information to get the lifting against me following (which no do I understand):

  Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR:   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 2 error(s)    ERROR: 12/01/13 13:16:06:425 | [INFO] |  | OOBE | DE |  |  |  | 6076 | ---------- CustomHook_Helperx64 ---- Start ----------  12/01/13 13:16:06:426 | [ERROR] |  | OOBE | DE |  |  |  | 6076 | Cannot load function name 'CSInstallerCustomHookProc' from library C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0    ERROR: System check returned with error : -4  ------------------------------------------------------------------------------------- 

  2. I installed 5 Lightroom, then uninstalled. When I went back to re - install, the application Adobe Creative cloud wouldn't let me. He says that my 5 Lightroom is "up-to-date" and that it is in my article 'Your applications', not in the section 'find new applications '. I rechecked my programs and features in Control Panel, and it isn't here. I cleaned my registry and it is still there. I deleted the file "opm.db" in my OOBE folder and restarted CC - still nothing.

  I must say, guys. I'm not very happy with the time I spent just trying to install programs on my PC. While the plan is for it to be intuitive at a certain time, it is not very functional at the moment. No matter how much help you can provide me would be amazing - if you can provide it sooner than later, I'd be on the moon.

  Thank you.

  Hope this will help others record the amount of time this error I spent troubleshooting.  When you install Adobe InCopy CC, CC of Adobe InDesign, Adobe Photoshop CC, CC prelude Adobe and Adobe first Pro CC on a laptop Windows Pro 8.1, I an error similar to the one below.  Other installations of Adobe Acrobat XI Pro, Adobe affect effects CC, Adobe Audition CC, Adobe Bridge CC, CC of Adobe Illustrator, Adobe Lightroom 5 and Adobe SpeedGrade CC installed without error.  I ran across this test with a clean operating system, new construction to help isolate the problem.

  23/12/13 16:33:04:372 | [INFO] |  | OOBE. OF |  |  |  | 912 | 23/12/13 16:33:03:368 | [ERROR] |  | OOBE. OF |  |  |  | 6316 | Cannot load the name "CSInstallerCustomHookProc" C:\Program Files (x 86) library function \Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0

  I ran a minimum load of the operating system by stopping all non Microsoft services by running MSCONFIG. EXE and disabling and disabling all startup in the Task Manager, Startup tab items.  After restarting the laptop, I was then able to install CC of Adobe Photoshop and Adobe first Pro CC.  However, Adobe InCopy CC, CC of Adobe InDesign and Adobe prelude always failed CC.  I needed to start safe mode and disable BitDefender Virus Shield and BitDefender Desktop Update Service and then restart mode Normal (services were always disabled). I continued and completed the installations of Adobe InCopy CC, CC of Adobe InDesign and Adobe prelude CC.

  It seems that BitDefender is the process to load this function as a virus Trojan markup and stop installation.

• Visibility of scene with javascript

  Hello

  , I create a pdf document, creating a scene of u3d. The scene contains two objects in scene, one with a visibility FRONT only and the other with a REAR visibility only (essentially the same as openGLs front and back of slaughter). If I manipulate not nodes in scene with javascript, everything works correctly, i.e. for the first object only its front is drawn and the second object only the rear side is drawn.

  However, if I use javascript to hide the objects in the scene and show them once again, each object is drawn with two visible sides (front and back). In my JavaScript code, I use the attribute .visible among the objects in the scene, which is a Boolean value according to the JS notes 3D API reference (e.g. scnobj.visible = true/false to show/hide)

  This is expected behavior? Can I control the visibility FRONT and BACK of my objects in scene with javascript somehow?

  Thank you!

  Dear Dave,

  Thank you very much prompt response. Deletion of the declaration of scene.renderDoubleSided = true did the trick. It seems that I put it by accident all fooling with js some time ago.

  He now works as expected.

• Control of color with Expressions

  Hello

  How can I control the color of several forms with a color of a shape parameter?

  Basically, I need match the parameter of color of a shape with one bunch of others.

  I guess that this can be done with Expressions.

  I use AE CS4.

  Thank you!

  You can convert RGB in TSL and decrease the L (luminosity).

  See the next page.

• Several questions with PPCS4

  Aloha and everyone,

  I have several questions with PP - CS4, they are:

  (1) the Sony HC-7 & 9 are not expressly listed in the Group of Capture Settings tab, "Device Control > Options button > device brand > Sony > DeviceType ' why?

  (2) my Sony HC - 7 camera is online, the Capture Panel is open, the settings tab is selected in the capture settings window click on "Capture Format HDV", the button modify immediately below appears and opens a dialog box, the value default "Format of Capture" bed "HDV", to the immediate right is a button "PARAMETERS of HDV.  This button is active, but when you click on it, there is no response.  This button is supposed to operate alone or do a bug?

  (3) a clip was made in the encoder and classified by subject for later use, including possible placement on a URL of stock footage.  This clip can be reused and essentially rendered again for use in a DVD or for placement on u-tube.

  (4) after washing of the gases through all clips in a "specific timetable", I want to move to a 'sequence' I titled "FRONT BEING RENDERED.  Cut / paste does not work to navigate between the sequences.  Is there a way?

  (5) in the timeline panel, after washing, I renamed the clips and added code comments.  When I export the clips thru 'Encoder' element names are lost in the process.  "Encode" supposed to work this way?

  (6) in the opening "encode". the upper part of the widow of the display indicates "drag - move clips or use the Add button", but when I go back to the timeline to select clips, I'm prevented drag / drop.  What I am doing wrong?

  It's enuf for now.

  mahalos much help...

  Cut & paste does not work to navigate between the sequences.

  It does for me.  What happens when you try?

  When I go back to the timeline to select clips, I'm prevented drag / drop.

  Drag-and - d├⌐poser is for real media files, no clips in first.  To add first, you can either export > media first, (the normal way when the first is opened) or using the command line of SOUL, to add a first sequence.