conversion of existing databases to code on several bytes

Similar Questions

• How to import of existing database (SQlite)

  Hello friends,

  as I started working on blackberry playbook...

  now I m facing a problem, which, in my application I want to use existing database rather than creating a new...

  When I tried to create a new database I got an error

  That is to say. database is currently loked...

  which app is closed by the Simulator...

  When I try to import my existing database using applicationDirectory.resolvepath("abc.db");

  It allows me to read the content of the application, but not able to make changes in it...

  I tried to use applicationStorageDirectory under which the application is beginning ending with Simulator

  Please help me!

  my code look like this...

  as I m tent to access this database... for that I stuck in air file.

  var fileCon: File = File.applicationStorageDirectory.resolvePath ("abc.db");

  allows me to read-only...

  var fileCon: File = File.applicationDirectory.resolvePath ("abc.db");

  When I push copy existing database in the folder of the air, I database is currently closed error.

  var fileCon: File = File.applicationStorageDirectory.resolvePath ("abc.db");

  Please help me for this problemm

  Thank you in advance

  the application directory is read-only. App-storage is read/write. If you have an existing database file that was installed in the application directory, you must copy it into the directory app-storage. Also, keep in mind that, if the application is uninstalled, all this information is also deleted. If you want to keep the user database file in the case where they re - install the app, you can copy/create the file in the document directory.

• Startup with the existing database problem

  When I give the start-up of an existing database, it gives me this error I have never come across please help...

  Here are the complete steps

  export ORACLE_SID = oracle

  [oracle@localhost oracle] $ sqlplus sys as sysdba

  SQL * more: Production version 11.2.0.1.0 may 6 Mar 15:57:07 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Enter the password:

  Connect to an instance is idle.

  SQL > startup

  ORA-27154: post/wait create failed

  ORA-27300: OS dependent operating system: semget failed with status: 28

  ORA-27301: OS error: no space is available on the device

  ORA-27302: an error occurred at: sskgpsemsper

  SQL > startup

  ORA-27154: post/wait create failed

  ORA-27300: OS dependent operating system: semget failed with status: 28

  ORA-27301: OS error: no space is available on the device

  ORA-27302: an error occurred at: sskgpsemsper

  SQL >

  Take a look on experience of Oracle: ORA-27300: OS dependent operating system: semget failed with status: 28

  HTH

  Anand

• Unspecified error in Microsoft JET Database Engine code = 0 Type = 1

  Had the following message from coldfusion by trying to create a connection with an access unicode driver
  
  Unspecified error in Microsoft JET Database Engine code = 0 Type = 1
  
  I wrote a previous post here, but it does not gives me an answer how to solve this problem.
  
  
  I installed coldfusion mx 7
  
  
  
  ----------------
  Well, that's kinda funny. I have installed the latest patches from microsoft. My server was already aware, but I tried anyway. After the reboot, the problem is resolved.

  Had the following message from coldfusion by trying to create a connection with an access unicode driver

  Unspecified error in Microsoft JET Database Engine code = 0 Type = 1

  I wrote a previous post here, but it does not gives me an answer how to solve this problem.
  

  I installed coldfusion mx 7

  ----------------
  Well, that's kinda funny. I have installed the latest patches from microsoft. My server was already aware, but I tried anyway. After the reboot, the problem is resolved.

• migration of existing database in ASM.

  Hi all
  
  I am currently working on the stand-alone database, and I want to migrate my existing database in ASM.
  
  I'll try using RMAN and I made the following changes in my database: -.
  
  SQL > alter system set control_files = '+ data' scope = spfile;
  Modified system.
  SQL > alter system set db_create_file_dest = '+ data' scope = spfile;
  Modified system.
  SQL > alter system set db_recovery_file_dest = '+ data' scope = spfile;
  Modified system.
  'data' here are the disk group
  I have stop the db and booted without mount
  
  so I can start the migration via RMAN
  
  in rman, I did the following things: -.
  
  D:\ > target = orcl RMAN
  
  Recovery Manager: Release 10.2.0.1.0 - Production on Fri Aug 28 01:13:02 2009
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  target password database:
  connected to target database: orcl (unassembled)
  
  RMAN > restore controlfile to ' D:\oracle\product\10.2.0\oradata\orcl\CONTROL01.
  CTL';
  
  From restoration to 28 August 09
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid = 156 devtype = DISK
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 2009-08-28 01:14:40
  ORA-19504: cannot create the file '+ DATA '.
  ORA-17502: ksfdcre:4 cannot create the file + DATA
  ORA-15001: 'DATA' diskgroup do not exist or are not mounted
  ORA-15077: could not locate instance ASM serving a required diskgroup
  ORA-19600: input file is the control file (D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CO
  NTROL01. CTL)
  ORA-19601: output file is the control file (+ DATA)
  
  RMAN >
  
  According to me, I guess that I haven't specified the disk group = '+ data' correctly or there is another way to specify...
  
  Please help all solve me this problem
  
  Thanks and greetings
  Pratik Lacoste
  DBA Oracle Jr

  I am currently working on the stand-alone database, and I want to migrate my existing database in ASM.

  I'll try using RMAN and I made the following changes in my database: -.

  SQL > alter system set control_files = '+ data' scope = spfile;
  Modified system.

  You have to change the system set control_files ='+ data / control01.ctl' scope = spfile;
  See Metalink Doc ID 252219.1

  Rgds.

• How to synchronize the data with the existing database maker?

  Hello
  
  is it possible to synchronize data with an existing database maker in data as Oracle designer maker
  -Connect to existing database
  -Generate a script (change if the object exist create if exists or not,...)
  -Run the script
  
  Thank you

  I created a quick demo and hung in [my blog: http://sueharper.blogspot.com/2009/08/updating-database-using-detail-from.html] or directly from [here: http://www.screentoaster.com/watch/stVEpWRUBIR11WRVlbXFpZVlRX/update_the_database_using_oracle_sql_developer_data_modeler]

  Sue

• recreate the database from an existing database script

  Hi Experts,
  
  I need script to re-create the database from an existing database. I tried to find in Web sites, im not able to get it.
  
  Please help me do this,
  
  Thanks in advance.
  
  concerning
  Sundar

  Loo in the metalink Doc ID: Note: 211905.1

• Case of Structures run a particular set of code for several conditions?

  Structures of the event may have a single case of event manage several event specifiers.

  C code supports this kind of statement 'switch ':

  Switch (EnumValue)
  
  {
  
  case a:
  
  case b:
  
      handleAOrB();
  
      break;
  
  case c:
  
  case d:
  
  e case:
  
      handleCOrDOrE();
  
      break;
  by default:
  
      handleOther();
  
  }

  How about Business Structures? Can I attach a code block to multiple values to enums? (without duplicating cases, which might be a maintenance nightmare)

  Edit: the closest thing I found is http://forums.ni.com/t5/LabVIEW/case-structure-multiple-inputs/td-p/2377132, but my original enum in another conversion is a bit rude

  You can specify multiple values enum for a particular case. Is that what you're looking for?

  

  For more information, see the series of weekly nuggets that I wrote on the case Structures: part 1, part 2, part 3, part 4and part 5.

• determine if my database access code is formatted

  When I zoomed in a my text field of database access by shift + F2, the text seems to be several lines. I don't know if it's supposed to be the vertical tabs, carriage returns or new lines of text as the replacement of the second function which refers to this text of database, the following code does not work:
  
  < %
  Dim memo
  Note Sun
  Dim text
  Memo = (products. Fields.Item ("CustomMemo01"). Value)
  Note = (replace (Memo, ":" ","< table > < td >""))
  text = (replace (note, "\r","< table > < /tr > < tr > < td >" "))
  % >
  
  I tried the code in the function replace with all these: / r, / n and /v but no work.
  
  Displaying this field of database on the Web page without using any function replace, the text appears on a single line with no carriage returns the formatting.
  
  How can I determine the new line formatting of my database field or if there is a problem with the replacement above code.

  > < %=""> < br=""> > Sun memo < br=""> > note dim < br=""> > dim text < br=""> > = (products. memo Fields.Item("CustomMemo01"). Value) < br=""> > note = (replace (Memo, ":","))")) < br=""> > text = (replace (note,"\r","")) < br=""> > %>
  >
  > I tried the function code replace with all these: / r, / n and /v but
  > nor work.
  >
  > Displaying this field of database on the Web page without using any
  > replace
  > function, the text will appear on one line with no carriage returns
  > formatting.
  >
  > How can I determine the new line formatting of my database field or if
  > there is
  > a problem with the replacement above code.

  http://www.Google.com/search?q=replace+vbCrLf&RLS=com.Microsoft: * & ie = UTF-8 & oe = UTF-8 & startI ndex = & startPage = 1

  text = Replace (note, + "\n",")
  ")

• What are the opinions of the developers on how best to manage the upgrade of the libraries of great code with several applications again a version of labview?

  I have a large set of code I have carefully migrated from version of one labview to another over the years.  I have a lot of deployed applications that I need to continue to support.  Of experience and interaction with other developers, I don't think I can continue to migrate each application to a new version of labview when I move in the future.  Each application seems to break in one way or another, the versions do not work right and need to be redone and its much too much time to get all my apps working and tested again.  This opinion is solidified by the policies of OR which make it impossible to install older versions of new versions of labview Toolkit, for example.  Compatibility is often sacrificed so NEITHER can develop labview in the direction they choose.  So I have to take the position that what version I have to write an application in will probably need to be maintained in this version of labview throughout his life.

  In this context, how are other developers management old application written in older versions of labview.  Right now I have a PC virtual on my system 7.1, 8.0, 8.2 and 8.5 running on different virtual PC so I can keep each installation separate.  I highly recommend this approach.  But keep my large libraries of separate code is difficult.  They are several GB, they all relate to each other, and I always get worried, even when I separate them into different directories that somehow labview will search in the wrong place and find the wrong version of a subvi.  Other people are also trying to keep copies separate from all their code in versions different labview?  How other people handle this problem?

  Hello

  The hierarchy of the following directories, coupled with a VI "hierarchical" naming strategy, have been effective (for me) to prevent "Crosslinking" through projects and versions of LV. The hierarchy of storage has been designed for use in an environment of CSC, but works very well regardless. Hierarchical naming ensures unique names for application-specific files. Library use of the project (in LabVIEW 8.x) addresses the problem of having different screw with the same name, yet, it gives me warm-ferrets have application-specific files named in a unique way and I can't imagine not use hierarchical naming more - he described the length in section 2.1 of the attached. doc...

  Note: It has been my experience that societies resources as well as specific support "programs", where a program is linked to a product or the "family" of products, so, under the (each subdirectory of "Program" below) encapsulates specific applications to the product (or family-specific). Assuming that no CSC tool is used the directory (below) is also, as depositary for distributables.  All the distributables necessary for the reproduction of a test station should be placed under .

  ******************************************

  
  
  |
  | |
  | | |
  | | | |
  | | | |
  | | | |
  | | |
  | | |
  | | |
  | | |
  | |
  | |
  | |
  
  * Program-specific applications that have (probably) distributables
  |
  | |
  | |
  | |
  * Individuals, specific to the application, screws go here
  | |
  | |
  |
  | |
  |
  * Tools of are NOT "program" - specific and perhaps distributables
  |
  |

  
  |
  |
  | |
  | | |
  | | | |
  | | | |   Application_ #1.bld >
  | | | |
  | | | |
  | | | |
  | | | |     Application_ #1.llb >

  * Distributable is created from LLB 'snapshot', not directly to the development tree
  | | |
  | | | |
  | | | |    Application_ #2.lvproj >
  | | | |
  | | | |
  | | | |
  | | | |     Application_ #2.llb >
  |

  ******************************************

• Problem with the conversion of Midlet (jad/jar) cod file (Jasymca 2.0)

  BB Storm last official OS.

  There is this wonderful program called Jasymca 2.0 which is a combination of programs of mathematics MATLAB and MAXIMA of high-end (subset to fit) and written in J2ME as a MOPED. To see a demo of it, go to http://webuser.fh-furtwangen.de/~dersch/jasymca2/indexEN.html and click on demo on the left. It's quite impressive... able to make the symbolic math and math matrix among others. The ultimate calculator for a PDA... and the best I could find out there.

  The only problem is that it is written in J2ME as a MIDLET and the runtime is stored as a combination of jad/jar. Now, I tried the standard conversion using the CAP as follows...

  CAP import = "C:\Program Research In Motion\BlackBerry JDE 4.7.0\lib\net_rim_api.jar" code name is jasymca-midlet jad is Jasymca.jad Jasymca.jar

  It seems to work very well. There are a few warnings about unused variables, but that's fine. The last line was "No Errors".

  .. .and he left me with a file .cod 229K

  When I insert it in my blackberry through javaloader, it loads very well.

  However, when I look in my download directory I 2 files related to Jasymca and not running.

  I suspect that it is because the cod file is too big. Is there another step I can do for the cod of the loadable file?

  Any help is appreciated.

  Thank you

  -Donald

  It takes more time than I expected.

  There is a preprocessor directives in the source files and to leave JDE to understand these guidelines, I need to modify the jdp.

  I stopped the investigation

  But I will say that I found.

  icons and data files must be located in the default folder.

  If the root folder of the package is src\

  path of the icon should be: src\myicon.png

  for now the icons are located in the src\icons folder

  in this case the image files are not accessible from the BlackBerry App.

  The second: there are some files showed up as the symbol file name first.

  JDE does not add these files to the project.

  I think that the best way would be to contact the developer of Jasymca and talking to him about the Jasymca and porting for BlackBerry

• Problem opening pdf files.  I have Acrobat Reader DC/Windows by default, but when I click on the file, a file conversion screen with all these codes. Must use the "open with" function which is a nuisance.  Why it will not default?

  Problem opening pdf files.  I have Acrobat DC/Windows by default, but when I click on the file, a file conversion screen now with all these language codes. Must use the "open with" function which is a nuisance.

  Why it will not open by default when I click on the file?

  Hello

  I guess that you are looking for this:

  Open drive

  Go in Edition > Preferences > General

  Uncheck the option, the online storage see the opening of the files

  Click OK and restart

  Thank you

  Abhishek

• Authentication using the table and the existing database

  Very new to APEX here. In authentication methods and was curious to know if it is possible to link the Apex on an existing Oracle database and the table to get information for user name and password. Trying to use the employe_id and last 4 of their social.
  
  Any ideas or things I can read up to get a general idea?

  JosephPortello wrote:
  fac586, thank you. I didn't even know what I had done.

  Yet one thing that happens now after I corrected my incorrect syntax.

  CREATE OR REPLACE FUNCTION EmployeeIDAuth (
  p_username IN VARCHAR2,
  p_password IN VARCHAR2
  )
  RETURN BOOLEAN
  IS
  form l_count NUMBER;
  BEGIN
  SELECT COUNT(*) into l_count from table@db WHERE employee_no=p_username AND bdate=p_password;
  IF l_count > 0 THEN
  RETURN TRUE;
  ELSE
  RETURN FALSE;
  END IF;
  END; 
  

  Now returns an error of:

  Error on line 15: PLS-00103: encountered the symbol "end-of-file" when expects it one of the following values:

  not end up dominant static of final instantiable order pragma
  manufacturer membership card
  1. CREATE OR REPLACE FUNCTION EmployeeIDAuth)
  2 p_username IN VARCHAR2,
  3 p_password IN VARCHAR2

  Any other ideas?

  Remove the false token form.

• Plaz someone do the sample Javafx 2.0 database application code

  I suggest Microsoft develop and I change my way to use javafx coding program. I've not seen example code as
  1 databases MySQL applications
  mdi form 2
  3 pop-up - new form
  
  someone help me
  the last question
  where can I certify javafx

  aidreamer wrote:
  2. What is an MDI form?

  I assume the OP means "Multiple Document Interface" - something like JInternalFrames in a JDesktopPane in Swing.

  DB

• Presentation of the existing database to a new machine

  I posted the question in the forum of DB and received no usable response, so I'll try this forum.
  I'm on Windows 2008 R2 x 64 platform.
  I installed a cluster of 11 GR 2 two starts for the OCR and voting disks and one for data.
  The data disks are replicated on external drives in the cluster.
  On a different node, is not part of the cluster I have installed the software from the grid.
  I seconded the diskgroup data nodes and attached the replicated to the new node.
  I installed the DB software (software option only).
  Now, I want to recognize and exploit the existing DB DB software.
  I can't find a way to do it.
  Any help is appreciated.
  Kind regards
  Fred

  Hello

  I seconded the diskgroup data nodes and attached the replicated to the new node.
  I installed the DB software (software option only).

  Configure the TNSNAMES file. ORA and SQLNET. ORA of two nodes.

  Now, I want to recognize and exploit the existing DB DB software.

  1. create directory audit_trail on each_node for example

  audit_file_dest          = %ORACLE_BASE%\admin\%ORACLE_UNIQUE_NAME%\adump)
  

  2 copy or re-create a file initfile and password on each node inside (% ORACLE_HOME%\database\) for example

  cat  initorcl2.ora
  SPFILE='+DATA/orcl/spfileorcl.ora'
  ...
  To create password file use utility %ORACLE_HOME%\bin\orapwd.exe
  filename must be  orapwd<$ORACLE_SID>
  

  3. add entries on TNSNAMES. ORA and SQLNET. Database ORA

  4 create Windows service for the Instance database with the ORADIM utility on each node:

  C:\> %ORACLE_HOME%/bin/ORADIM.exe -NEW -SID ORCL1 -INTPWD  -STARTMODE AUTO -PFILE %ORACLE_HOME%\DATABASE\INIT.ORA
  

  5. create the database configuration in the clusterware, through orders srvctl

  for example

  srvctl add database -d ORCL -o  c:\app\oracle\product\11.2\dbhome_1 -p +DATA/orcl/spfileorcl.ora -a  +DG_DATA -s open
  srvctl add instance -d ORCL -i ORCL1 -n hostname1
  srvctl add instance -d ORCL -i ORCL2 -n hostname2
  

  Kind regards
  Levi Pereira

  Published by: Levi Pereira on March 23, 2011 10:46 # changed with the appropriate procedure for the windows environment.