determine if my database access code is formatted

Similar Questions

• System PeopleSoft database Setup error: PSDMTX error: access code

  People,
  
  Hello. I just installed MS SQL Server 2005 and PeopleTools 8.49 successfully. After that, I run D:\PT8.49\setup\PsMpDbInstall\setup.exe. The wizard runs by steps and connects to SQL Server 2005 successfully. Initializing the wizard Data Mover, it stops and the message as follows:
  
  "Invalid ID to access and password for the access code. psdmtx error. Installation failed load PeopleSoft data with following error message: error: psdmtx running. Please review the log file located under the directory of the log for more details. »
  
  I opened psdmtx.log and the message is: "' PSDMTX error: access code" "
  
  Due to the error above, I've implemented PeopleTools 8.49 Configuration Manager correctly. I also run a Script of Server Configuration 'spconfig.sql' and 'connect.sql' with the adequate development of < CONNECTID > and < CONNECTPS >.
  After that, I have run "D:\PT8.49\setup\PsMpDbInstall\setup.exe" again and get the same error.
  
  In 'setup.exe' Assistant, he has only 5 entries: ID symbolic PeopleSoft (sa1), PeopleSoft Access ID (sa), the PeopleSoft access password (mypass), PeopleSoft (people) and PeopleSoft login ID connect password (mypass).
  
  I know, PeopleSoft Access ID and password are used to communicate with SQL Server, and 2 values connect to SQL Server successfully. PeopleSoft Connect ID and password Connect are used to load the PeopleSoft database, and I put 2 values correctly. Symbolic PeopleSoft ID (sa1) is causing the problem?
  
  People can help solve this problem?
  
  Thank you.

  You install on a 64 bit OS?

  If so, you must configure your system DSN ODBC for PeopleTools 32-bit client from:
  * C:\Windows\syswow64\odbcad32.exe

  Confusion that the app has 32-bit in his name, and the 32-bit version of it lives in a folder named syswow64...

  Once you have configured the connection ODBC here, you should be able to connect to Data Mover, using the "bootstrap" mode (for example with the user his) and proceed with the installation.

• iPhone 4 has a scrambled screen. Can I enter remote access code?

  I gave my child my iPhone 4 when I upgraded. He had the newest iOS available for the 4, which I think was 7.1.2 or something close. before I gave it to her, I restored to factory settings and deleted all the files. She created a new password and it used for music and photos. She doesn't have it synced to a device or stored in iCloud. It worked perfectly when I gave it to her. A few days earlier, she dropped and now the screen is scrambled and bring up the screen to enter the access code. I plugged it to my MacBook to see if I could get behind the scramble but I just got a message that the photos cannot be downloaded without unlocking the device.

  - SO my question is, is it possible to enter this access code other than to type in the phone itself? Some behind the scenes where I can enter the code and go to the photos and music living in the unit? This phone has a removable SIM card.

  Grateful for any help you can give me.

  mactwisp wrote:

  - SO my question is, is it possible to enter this access code other than to type in the phone itself?

  No, it isn't.

  I hope that "photos and music living in the unit" were backed up when the iPhone was iTunes or iCloud.  If not, the only hope would be to take the iPhone to an Apple Store or Service Center authorized Apple and determine if it is fixable (very unlikely, in my opinion).  If it's fixable, great.  If this is not the case, the material on the iPhone is lost.  (Note bought from iTunes music can be re-downloaded iTunes on a computer or an iOS device different.)

  For later use, the iPhone should never be the main housing for music not bought in iTunes.  Also, of course, photos taken on an iPhone that are worth saving must be saved.

• Unspecified error in Microsoft JET Database Engine code = 0 Type = 1

  Had the following message from coldfusion by trying to create a connection with an access unicode driver
  
  Unspecified error in Microsoft JET Database Engine code = 0 Type = 1
  
  I wrote a previous post here, but it does not gives me an answer how to solve this problem.
  
  
  I installed coldfusion mx 7
  
  
  
  ----------------
  Well, that's kinda funny. I have installed the latest patches from microsoft. My server was already aware, but I tried anyway. After the reboot, the problem is resolved.

  Had the following message from coldfusion by trying to create a connection with an access unicode driver

  Unspecified error in Microsoft JET Database Engine code = 0 Type = 1

  I wrote a previous post here, but it does not gives me an answer how to solve this problem.
  

  I installed coldfusion mx 7

  ----------------
  Well, that's kinda funny. I have installed the latest patches from microsoft. My server was already aware, but I tried anyway. After the reboot, the problem is resolved.

• psdmtx error: access code

  Hello
  
  I am facing problem while connecting to the database in a Linux... I created the database and I am not able to connect Data Mover of the client machine (windows)... where mistaken... .This is the error I get when connecting to the database on the linux machine.
  
  PSDMTX error: access code
  Reason: Could not sign PTSYS database with user PTDMO
  
  I don't know where can make entries in the psconfig file in GNU / linux...
  
  see you soon-

  I know, these two errors are interconnected and should come from your settings of approx.
  Which operating system user you use Linux at running the command?
  This OS user can connect to the database using entry PTSYS?
  You define variable env ORACLE_HOME for this user to the BONE?
  Is this OS user can read file $ORACLE_HOME/network/admin/tnsnames.ora?
  Is there an entry for PTSYS in $ORACLE_HOME/network/admin/tnsnames.ora file?
  Have you tried to shoot with the same OS user:

  tnsping PTSYS
  

  Please, give answers and you will easily find a solution.

  Nicolas.

  PS: your error is described in note metalink3 PSAPPSRV fails to start - Return: error initializing the 8097 - Oracle (Doc ID 648487.1)+.

  Ref added metalink3
  Edited by: N. Gasparotto 15 May 2009 15:05

• Since iOS 10.0.2 my phone is accessible without the access code

  Since iOS 10.0.2 my phone is accessible without the access code after I pressed the sleep button. Press the home key several times my phone opens. As a first step, it is that he fell asleep in itself not when I used the sleep button but now even after skeep button I can access my phone without the password.

  the rear power and apple support site are not easy to use to report the problem.

  Have you tried to set up your password again in the settings?

• Access code is lost as soon as the screen turns off

  When I turn my wrist after that my Apple Watch screen exploded, I need to enter the access code. I turn on the wrist, the screen turns off, I turn back, screen lights up, I need to re-enter the password. And so on and so forth. The watch does not maintain the code.

  I am white white, is not dense hairs on my wrist, no tattoos and I wear the watch very well on my skin.

  The funny thing is: it is a replacement watch, I got today. The other had the same problem, but this is probably because the bottom of the watch with the sensors fell, must have damaged the sensor cable. But this one is brand new.

  Hello

  Make sure the wrist detection is enabled:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > General > detection of wrist - turn on.

• Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  If she don't remember: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this.

  My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this. All the settings are there. I have an IPhone 6.

  Are? you double click in front of the screen of the iPhone are? (pending). This is what seems to work for me.

  I hope this can help.

• iOS 10 access code

  Is it possible to use only an access code in iOS 10?  I've always used only a password, but the instructions I've seen for the new system seem to require using the key fingerprint to open the phone.

  Reference this support Page - use a password with your iPhone, iPad or iPod touch - Apple Support

  It is always possible and can be disabled in the settings > Touch ID and password/access code.

• Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

  Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

• I got a notification saying "password requirement: you must change your secret code in 56 minutes"I panicked and entered my access code using the little box? ". I ' t mess up?

  I got a notification saying "password requirement: you must change your secret code in 56 minutes"I panicked and entered my access code using the little box? ". I ' t mess up?

  Yes. You may be victim of a scam, except if you are connected to your business with this requirement.

  Change your password immediately below:

  https://appleid.apple.com.

• What is my access code for the software updates

  What is my access code for the software updates?  It seems to be a six-digit numeric code, but I have no recollection of anyone establishing.

  Take a look at this thread, what is the password for software update

• Why apple IOS 9.3.2 requires an access code 4 digit instead of the previous 6-digit

  Today, 01/08/16, my 5s required an update of the access code and only 4 digits, instead of the 6 previous numbers. Why?

  < published by host >

  mweedn wrote:

  Today, 01/08/16, my 5s required an update of the access code and only 4 digits, instead of the 6 previous numbers. Why?

  < published by host >

  You can always use the four or six-digit access code.

  You can change it when you go into the settings of password.

• Apple TV access codes

  Why AppleTV does not back to school already consulted programming access codes?  Is there a setting I'm missing that will allow continued access without returning to the network (food network, CBS, etc...) for re - check an access code before watching the station again?

  Normally, it is not, or at least should not, require re-entry, but occasionally either something wrong with ATV, or more commonly, the provider of satellite-to-cable makes a change.