conversion of jpg to vector in photoshop

Similar Questions

• Conversion of jpg to ASCII for code output ZPL-Zebra printer

  I print on a Zebra ZM400 using the ZPL code. I can upload images to the printer using Zebra utilities and I remember these images to print on a label, but I have to be able to download pictures using the ZPL code (using the ~ DG command). The ~ DG command needs the JPG image to ASCII format. I have other images that were already converted to ASCII (by someone else) that I am able to print, so I know what I do works as expected, however my problem is that I have new images which must be converted to ASCII format required and I don't know how to do this.

  So, my goal is to print a picture on a Zebra printer, but my real question is to know how to convert a JPG image to ASCII format (for the Zebra printer).

  Let me know if you need more information.

  Thank you

  Hi Emily,.

  Unfortunately, I have not well understand how this has been done before that the person who had previously completed a conversion is no longer works for our company.

  The ZM400 printer uses ZPL II of Zebra language to create/format of labels and the printer setup/order. Instead of download chart (~ DG), I am now using the command object download (~ DY), located in the ZPL II (182 p) programming guide. This allowed me to use a. File PNG rather than JPG, which was easier to work with.

  http://www.Zebra.com/apps/dlmanager?DLP=-227178c9720c025483893483886ea54a70963bb77ca94fcc1d65ce93943...

  I was able to use a modified version of your suggested method to make it work. The ~ DY command takes a parameter (data) which is a 'hexadecimal ASCII string defining the image', which is defined as: "the data string sets the image and is a hexadecimal representation of ASCII image. Each character represents a horizontal nibble by 4 points. "So the method you suggested is exactly what I had to do, however I didn't say that it must be represented in hexadecimal ASCII code.

  I converted the binary file reads (of the PNG) data into a byte array, then made a (padded two-digit in hexadecimal) number of channels within a loop conversion For to give the ASCII representation of the binary data. This gives a hexadecimal representation of ASCII to binary data. VI is attached.

  Thanks for your help!

  I encountered another problem: the PNG files took an eternity for the printer load into memory when printing (compared to the same image in Zebra. GRF format). I solved this re-reading the file saved on the printer, where it is native. GRF format (using the ^ HG command), then re-recording this output (now in the ZPL code formatted) to the printer. I guess there is a way to convert directly to the. Format of the GRF, but for now it does not work in my case.

  Thanks again!

• The value of jpg to open in photoshop CS6

  I'm trying to open in my newly installed Photoshop CS6 when you navigate in Explorer to jpg.
  I tried to go to the "set Associations", and does not appear in the 'recommended' or 'Other' programs Photoshop and when I hit the button 'Browse... "I can choose to Photoshop but it does not always show in the 'Open with' window, so only selects for use. The same thing happens if I click with the right button on a JPG file and select 'open with '. I can search and select Photoshop, but after I clicked "Open" it does not add Photoshop to the list and does not open in Photoshop.
  I have tried with several JPG files, can open the file in the photoshop program and had photoshop to set as default, when I got CS3. How can I get it work?

  Found a fix - if anyone else has this problem:

  
  Problem: Photoshop CS6 is not an option as default program for jpg/jpeg in Windows 7 Professional 64 bit. Not even when you navigate to the program.

  Solution: If you pin a jpg from your desktop into ch you then right-click on the jpg file and define the program by default Photoshop CS6.*
  When you click and drag the file down to the icon of the Ps. place the cursor on the icon of the Ps and gives you the opportunity to pin the Photoshop file via the suspicion of the tool. When you see this option, release. If you right-click on the Ps icon you will see a list of recent items and your pinned file should be at the top.

  This patch brings photoshop in the "other programs" list so that you can now activate other files open in Photoshop as well.

  Note *: it is also the solution if you have a similar problem with using "Open in external editor" InDesign and the jpg/jpeg opens in one program other than photoshop. PIN just a jpg in photoshop.

• Convert PNG logo to vector in Photoshop

  Is it possible to convert a raster, by https://www.eurofloorslondon.co.uk/logo, a vector logo using Photoshop? I did the PNG file with transparent background, don't have the original file anymore and I would use it on a large screen at the front of the exhibition hall. Of course, the logo on the Web site is not good for printing large format. I found it difficult as the orange on the left has also some gradient. Thank you very much for the help.

  Have you try to export as and choose for the SVG format?

  

• change the colors in the vector shapes - photoshop script

  I have a problem with the code which changes the colorsand vector shapes. It only works on a single layer, and if you select more than one layer, it pops up error. Is - that someone knows how to solve this problem?

  #target photoshop
cTID = function(s) { return app.charIDToTypeID(s); };
sTID = function(s) { return app.stringIDToTypeID(s); };

function Action3() {

  function step1(enabled, withDialog) {
   if (enabled != undefined && !enabled)
   return;
   var dialogMode = (withDialog ? DialogModes.ALL : DialogModes.NO);
   var desc1 = new ActionDescriptor();
   var ref1 = new ActionReference();
  ref1.putEnumerated(sTID("contentLayer"), cTID('Ordn'), cTID('Trgt'));
  desc1.putReference(cTID('null'), ref1);
   var desc2 = new ActionDescriptor();
   var desc3 = new ActionDescriptor();
   var desc4 = new ActionDescriptor();
  desc4.putDouble(cTID('Rd '), 243);
  desc4.putDouble(cTID('Grn '), 110);
  desc4.putDouble(cTID('Bl '), 93);
  desc3.putObject(cTID('Clr '), sTID("RGBColor"), desc4);
  desc2.putObject(cTID('FlCn'), sTID("solidColorLayer"), desc3);
   var desc5 = new ActionDescriptor();
  desc5.putInteger(sTID("strokeStyleVersion"), 2);
  desc5.putBoolean(sTID("fillEnabled"), true);
  desc2.putObject(sTID("strokeStyle"), sTID("strokeStyle"), desc5);
  desc1.putObject(cTID('T '), sTID("shapeStyle"), desc2);
  executeAction(cTID('setd'), desc1, dialogMode);

  };

  step1();};

  Action3.main = function () {

  Action3();};Action3.main();

  2016, use it at your own risk.

  #target photoshop

  If (app.documents.length > 0) {}

  myDocument var = app.activeDocument;

  var theLayers = getSelectedLayersIdentifier();

  for (var m = 0; m< thelayers.length;="" m++)="">

  changeSolidColor (theLayers [m], 128, 0, 255);

  }

  };

  //////////////////////////////////////////

  based on the code of paul m..

  function getSelectedSoidColorLayersIdentifier() {}

  var selectedLayers = new Array;

  Var ref = new ActionReference();

  ref.putEnumerated (charIDToTypeID ("Dcmn"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"));

  var / / desc = executeActionGet (ref);

  If (desc.hasKey (stringIDToTypeID ("targetLayers"))) {}

  DESC = desc.getList (stringIDToTypeID ('targetLayers'));

  var c = desc.count;

  var selectedLayers = new Array();

  Browse layers selected;

  for (var i = 0; i)<>

  try {activeDocument.backgroundLayer;

  var theIndex = desc.getReference (i). getIndex();

  } catch (e) {var theIndex = desc.getReference (i) .getIndex () + 1};

  get id for layers of solid color;

  try {}

  Var ref = new ActionReference();

  ref.putIndex (charIDToTypeID ("Lyr"), theIndex);

  var layerDesc = executeActionGet (ref);

  var theIdentifier = layerDesc.getInteger (stringIDToTypeID ("layerID"));

  var adjList = layerDesc.getList (stringIDToTypeID ('adjustment'));

  var theColors = adjList.getObjectValue (0) .getObjectValue (stringIDToTypeID ('color'));

  selectedLayers.push (theIdentifier);

  } catch (e) {};

  };

  If a single:

  } else {}

  Var ref = new ActionReference();

  ref.putEnumerated (charIDToTypeID ("Lyr"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"));

  var layerDesc = executeActionGet (ref);

  try {}

  var theIdentifier = layerDesc.getInteger (stringIDToTypeID ("layerID"));

  var adjList = layerDesc.getList (stringIDToTypeID ('adjustment'));

  var theColors = adjList.getObjectValue (0) .getObjectValue (stringIDToTypeID ('color'));

  selectedLayers = [theIdentifier]

  } catch (e) {};

  };

  Return selectedLayers;

  };

  change the color of solid color layer.

  function changeSolidColor (theIdentifier, theR, g target) {}

  // =======================================================

  var idsetd = charIDToTypeID ("setd");

  var desc4 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref1 = new ActionReference();

  Ref1.putIdentifier (stringIDToTypeID ('contentLayer'), theIdentifier);

  Desc4.putReference (idnull, ref1);

  idT var = charIDToTypeID ("T");

  var desc5 = new ActionDescriptor();

  var idClr = charIDToTypeID ("Clr");

  var desc6 = new ActionDescriptor();

  idRd var = charIDToTypeID ('Rd');

  desc6.putDouble (idRd, theR);

  var idGrn = charIDToTypeID ("Grn");

  desc6.putDouble (idGrn, g);

  var idBl = charIDToTypeID ("Bl");

  desc6.putDouble (idBl, theB);

  var idRGBC = charIDToTypeID ("RGBC");

  Desc5.putObject (idClr, idRGBC, desc6);

  var idsolidColorLayer = stringIDToTypeID ("solidColorLayer");

  Desc4.putObject (idsolidColorLayer, idT, desc5);

  executeAction (idsetd, desc4, DialogModes.NO);

  };

• JPG file size inflated - Photoshop Document metadata: ancestors

  Has anyone experience this problem?

  I have a JPG file I have deleted all the image of and filled with white. When I save it, the size 7.89 MB. If I go into Bridge and clear metadata, probably ' < Document: ancestors > ' which contains ' RDF: bag <>"and 100 + lines of hexadecimal code, the file size down to about 150. Maybe I'm missing a file option on photoshop, but it seems that this metadata should be rubbed on the saved file. In addition, no one knows what kind of information is stored in the Document ancestors? Or if there is information from integrated image that could potentially be extracted?

  I was able to reach out to Adobe through my work. They mentioned that it was abnormal behavior so that there are over 100,000 lines of Document ancestors and thought it's maybe because it was a model. It turns out that a lot of the art I work with has lines of ancestors, and when you place them in a whole new file, this file becomes the. Many of these assets are CG renders, which too would be new files. While I don't know source of the Document ancestors, I could find a way to eliminate:

  function deleteDocumentAncestorsMetadata() {
      whatApp = String(app.name);//String version of the app name
      if(whatApp.search("Photoshop") > 0)  { //Check for photoshop specifically, or this will cause errors
          //Function Scrubs Document Ancestors from Files
          if(!documents.length) {
          alert("There are no open documents. Please open a file to run this script.")
          return;
          }
          if (ExternalObject.AdobeXMPScript == undefined) ExternalObject.AdobeXMPScript = new ExternalObject("lib:AdobeXMPScript");
          var xmp = new XMPMeta( activeDocument.xmpMetadata.rawData);
          // Begone foul Document Ancestors!
              xmp.deleteProperty(XMPConst.NS_PHOTOSHOP, "DocumentAncestors");
              app.activeDocument.xmpMetadata.rawData = xmp.serialize();
           }
  }
  //Now run the function to remove the document ancestors
  deleteDocumentAncestorsMetadata();
  

  Adobe has indicated that these were intended for the medical legal file and contained no sensitive information. I also tested this script with a loop provided in one of the Javascript reference Documents, and while it removes successfully ancestors without opening the file, it does not reduce the size of file until it is opened and saved again. So it must be run before you save on an open file and fit easily in my save scripts. Problem solved!

  If you are new to scripting, copy the lines above in a text of the document (no formatting as it can not work) and change the extension of JSX. From here in Photoshop, go to file > Scripts > Browse, locate this script to run on an open file. This can be tedious to do by file, so if you run on several, place the file in a fixed location and record an action that runs this script. If you don't know, once the script is saved you lot this script on the file navigation files > PLC > batch. Because the file needs to be saved to eradicate the ancestors of the document, I recommend pairing your script with a backup action as in a fixed location, as save in as long as actions will remember the folder you saved in.

• JPG files saved in Photoshop CC 2015 errors in file suffix?

  I use Lightroom and Photoshop CC 2015 on my MacBook Pro retina, Intel i7, OS 10.11.2, 768 GB SSD, 16 GB of Ram.  When I'm done with a PSB, TIFF or NEF editing tool, and I write 'Online', I decrease the bit in 8bits depth, flatten the Image, Assign sRGB Color Space and finally do a ' Save As'filename' JPG.

  
  

  About 1/2 of the pictures have something wrong with the JPG suffix so that they can be brought online!  They can be placed in emails, Flickr', Craigslist or eBay.

  Even Photoshop don't reopen, calling for an "unknown file format"!

  
  

  Images appear in their appropriate folders, each with the suffix '.jpg '. In the 'Finder' Mac I have to 'Get Info' on each image, change the suffix CPS, then reopen in Photoshop!  THEN I repeat all the steps above, then make a new "Save as" with the same name and the same file, prompting a question to 'replace the file. 

  I answer YES and now the Omnium JPG correctly!

  
  

  Any ideas?  I is about to fall back to my last purchase! PS 6 extended!
  

  I don't know if it's important, but make sure your CC 2015 is up-to-date as well.  2015.1.1 is the current version.

  In fact, what happens when you install ACR 9.3.1 on a system with CS6/9.1.1 and CC-2015/9.1.1?  The installer works through ok, or is there an error message?  No matter if the CS6 is installed through the CC app/previous media vs an original CS6 network Versions, where the cloud installed version is somehow more integrated in the world of CC?

  And maybe you want to uninstall CS6 and CC and update CS6 the program completely and ACR, then install PS - CC 2015 and update all the way.  Or maybe you want to install CC 2015 and get it to update, and then install previous Versions section CS6 in the CC application but that's maybe what you did.

  I have two CC-2015 and the CS6 installed from the CC app.

• Try to upgrade a PES 10 catalog Lightroom CC - problem: conversion file path problem [was: upgrade Photoshop elements catalog]

  Update 20150707:

  So I think I found the reason for the problem:

  About 60% of my files in my catalog of PES 11 are converted (or probably better: "sent") to Lightroom with a double slash "/ /" in the path of the file.

  This looks like: D:/photos/ /Keep, albums, 2002, 200212 < the rest of the way is OK >...

  Lightroom complains that it cannot find the file on the disk, probably because of the double slash.

  With more than 4,000 theses error Lightroom core dumps with a buffer overflow, probably due to the large number of error messages. Cup of the catalogue of PES 11 decline little by little I managed to identify the cause.

  The problem is that my PES 11 catalog is repaired, optimized and PES 11 think that the file is in the correct location and can open and edit it.

  So what do I do to make the two programs to understand each other with their file name conventions? ... or how to get rid of the second crime "/"?

  Thank you

  Thomas

  ---

  Good afternoon

  I'm trying to upgrade a PES 10 catalog Lightroom (Lightroom details below) CC - both on Windows 8.1 (details below as well)

  There are about 30,000 photos in the catalogue of PES 10. Import runs for awhile then LR CC shows a short message that it could not import all of the photos and then it is intercepted by a Windows operating system message that indicates «Lightroom has stopped working...» »

  He has imported about 3,500 photos and converted all the photos of Collections, but also in the tree of the key.

  I tried the following:

  (in PES 11)

  • optimized and repaired the catalog
  • removed all files types that LR does not support
  • removed all media offline

  (in LR cc)

  • Tried running in different compatibility modes
  • Tried running in administrator mode
  • Temporarily disabled any antivirus software

  I run LR CC successfully with a new catalog and it behaved very well through all operations. TI ROM dumps on the conversion of this catalogue. Importing photos from the catalogue above works fine hierarchy; just that it loses the key word and obviously knows no collections.

  Is there any log file indicating the element involved the conversion?

  I have to say that I love LR after a period of three weeks of the trial, but I'm not really ready to let go hold on 90% of my data meta at this stage.

  Best

  Thomas

  System Info for LR and PSE

  ---

  Version of Lightroom: CC 2015.0.1 [1018573]

  License: Trial

  Operating system: Windows 8.1 Business Edition

  Version: 6.3 [9600]

  Application architecture: x 64

  System architecture: x 64

  Number of logical CPUs: 4

  Processor speed: 3.1 GHz

  Built-in memory: 16199,9 MB

  Real memory for Lightroom: 16199,9 MB

  Real memory used by Lightroom: 364.6 MB (2.2%)

  Virtual memory used by Lightroom: 314,3 MB

  Memory cache size: 185.7 MB

  Maximum thread count used by Camera Raw: 4

  Camera Raw SIMD optimization: SSE2, AVX, AVX2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1200, 2) 1920 x 1200

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  Check the supported OpenGL: failed

  Vendor: Intel

  Version: 3.3.0 - Build 10.18.10.3345

  Renderer: Intel(r) HD Graphics 4600

  LanguageVersion: 3.30 - Build 10.18.10.3345

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: C:\Users\behreth\Pictures\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\behreth\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) Behance

  (2) substantive canon Plugin

  (3) Facebook

  (4) Flickr

  (5) attachment Plugin Leica

  (6) home Plugin Nikon

  Config.LUA flags: None

  Update Kit: Adobe Camera Raw to Lightroom 6.0 9.0 (build 1014445)

  Update Toolkit: book Module 6.0 (build 1014445)

  Update Kit: develop Module 6.0 (build 1014445)

  Toolbox update: Import Module 6.0 (build 1014445)

  Updated Toolkit: library Module 6.0 (build 1014445)

  Update Kit: Card Module 6.0 (build 1014445)

  Update Toolkit: monitor Module 6.0 (build 1014445)

  Update Toolkit: print Module 6.0 (build 1014445)

  Update Toolkit: Slideshow Module 6.0 (build 1014445)

  Toolbox update: Module Web 6.0 (build 1014445)

  Update Kit: com.adobe.ag.AgNetClient 6.0 (build 1014445)

  Update Kit: com.adobe.ag.AgWFBridge 6.0 (build 1014445)

  Update Kit: com.adobe.ag.Headlights 6.0 (build 1014445)

  Update Kit: com.adobe.ag.LibraryToolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.MultiMonitorToolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.archiving_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.bridgetalk 6.0 (build 1014445)

  Update Kit: com.adobe.ag.catalogconverters 6.0 (build 1014445)

  Update Kit: com.adobe.ag.cef_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.coretech_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.curculio 6.0 (build 1014445)

  Update Kit: com.adobe.ag.discburning 6.0 (build 1014445)

  Update Kit: com.adobe.ag.email 6.0 (build 1014445)

  Update Kit: com.adobe.ag.export 6.0 (build 1014445)

  Update Kit: com.adobe.ag.ftpclient 6.0 (build 1014445)

  Update Kit: com.adobe.ag.help 6.0 (build 1014445)

  Update Kit: com.adobe.ag.iac 6.0 (build 1014445)

  Update Kit: com.adobe.ag.imageanalysis 6.0 (build 1014445)

  Update Kit: com.adobe.ag.layout_module_shared 6.0 (build 1014445)

  Update Kit: com.adobe.ag.pdf_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.sdk 6.0 (build 1014445)

  Update Kit: com.adobe.ag.sec 6.0 (build 1014445)

  Update Kit: com.adobe.ag.socket 6.0 (build 1014445)

  Update Kit: com.adobe.ag.store_provider 6.0 (build 1014445)

  Update Kit: com.adobe.ag.substrate 6.0 (build 1014445)

  Update Kit: com.adobe.ag.ui 6.0 (build 1014445)

  Update Kit: com.adobe.ag.video_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.xml 6.0 (build 1014445)

  Update Kit: com.adobe.wichitafoundation 6.0 (build 1014445)

  Map #1: Vendor: 8086

  Feature: 412

  Subsystem: 204a 8086

  Review: 6

  Video memory: 96

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  ---

  10.0.0.0 elements Organizer

  Basic version: 10.0 (20110914.m.17521)

  Language version: 10.0 (20110914.m.17521)

  Current catalog:

  Catalog name: fitt_master_backup

  Catalog location: C:\data\pse11_catalog\fitt_master_backup\

  Size of the catalog: 135, 8 MB

  Catalog Cache size: 1, 1 GB

  System:

  Name of the operating system: 2000

  Operating system Version: 6.2

  System architecture: Intel CPU Family: 6, model: 12 Stepping: 3 with MMX, SSE whole, SSE FP

  Built-in memory: 15, 8GB

  Free memory: 4, 9 GB

  I found the reason, but there is no solution...

  Comments:

  The double slash ' \ ' in the path appears to be introduced with the upgrade to PSE10. I can't say how it happened, but there were about 27,000 files connected by an access path "D:\pictures\\album\portrait\image_1.jpg".

  Fortunately, I worked with this database, as in fact all files could be catalogued, modified, opened with the editor. I checked from time to time for "Missing files" and none has been identified. After I discovered the problem during the conversion of catalogue Lr, I checked the display "File Location" and none of the files with the double slash are recognized as part of the catalog. I could import into the catalog of the "location of the folder" producing duplicates:

  'D:\pictures\\album\portrait\image_1.jpg '.

  'D:\pictures\album\portrait\image_1.jpg '.

  live happily next to each other.

  I could "move" the wrong file in the thumbnail view in its original, which corrects the incorrect path. But as my collection is well distributed on a large directory structure and there is no way to sort way "thumbnail" it would be a never-ending task.

  Here are the steps I took to fix the problem. It was not as simple as it sounds by

  now and took a lot of trial and error for weeks.

  1. I made a backup of the catalog PSE10 ("File-> backup catalog..") hard disk
  2. I have 'removed' photos from their original location, so that they could not be found (as I had a distinct data reader, I just removed the drive letter in the Windows Disk Management Console)
  3. I restored the backup PSE10 ("File-> Restore Catalog... "), choose 'new place' and placed in the root of a different drive. If you do not have a spare laptop drive, you can use the "subst q: ; I had hoped to keep the structure of the root, it is easier for the PSE10 to reconnect files later, but I can't confirm that it makes a difference.
  4. After restoring PSE10 complained (thankfully!) could not find any files (27,000) with double '-', so, unlike the situation at the beginning, I could now chose "file-> reconnect-> all missing files. He tried to find the files, but he could not find them in the area returned after searching for 5 minutes for the first file. Then I reconnected a file manually and restarted the process and after 1 h PSE10 had reconnected all files without any problems, and the images appeared as well in the 'file location' display.
  5. As I wanted my files in their original location, I "return" the files in their original location by moving them in the 'File location' view, which took another 3 hours.
  6. As I was not very confident with the whole process ensuring all files have actually been part of this process, I closed 10 PSE and "reinstalled" my original tree together file pictures of the "retired" location (step 2) after you delete the files moved PSE10.
  7. I grew up PSE10 and checked for missing files, everything was still connected.
  8. Finally I re-imported the tree of the original files 'reinstalled' together again to see if something is missed, but all files have been correctly identified as duplicates. The final step was to validate "File Location" view, where are the files appears in the tree structure tight.

  Then, I did what I wanted finally to update the catalogue of PSE10 to LR6 and it worked without any problems take images and metadata across.

  Fact.

  A plea to Adobe...

  I think it would be a great idea to publish catalogues different proprietary formats (PES / LR). This

  cannot be that difficult because you must have appropriate documentation. In this case the problem could be

  solved with double '-' setting programmatically. If you think that your customers entrust their digital

  assets on your cloud, some "opening" your end would be just one...

• TIFF to problem of Conversion of JPG

  I'm having a problem in Photoshop CS2, where I have a TIFF image and I use 'Save for Web' to save it in JPG format but the colors are completely false, as if most of the information has been discarded.  I know that from 16 bit to 8 bit, they actually are being ignored, but the images still looked exactly the same in the past up to that I reinstalled the program.  Even in the 'Original Image' pane, it shows the low color version.

  How can I fix it?

  Two things to check 1) color profile make sure you use the correct profile for RGB. 2 color) up, check and see if the color CMYK proofing is activate or some other color scheme. Or any of them can do what you describe.

• Just installed CS6, but cannot associate the JPG file type with Photoshop.

  Earlier, I installed Photoshop CS6 and Lightroom 4. Types of PSD and TIFF files work fine, but I'm completely unable to associate the JPG, JPEG or any other variant with the Photoshop program, such that I can double-click on the photo file and open Photoshop and photography. I can associate JPG to bridge or Lightroom or other programs, but when I go to Photoshop, then select Photoshop.exe nothing happens, even not an error message. Does anyone have an idea what is happening here?

  Operating system is Windows 7 Ultimate, 32-bit Edition. There is 4 GB of memory in the machine, which is a Dell Vostro 1720 laptop.

  Thank you

  Bill Sexauer

  I had the same problem. Initially could only associate JPEGs PS CS5, after removing the PS CS5 I still couldn't join the 6. Fixed after running the CCleaner registry cleaner.

• Does my SX260 read jpg that I browsed PhotoShop and loaded onto an SDHC card

  I use pictures originally taken with the camera. I'll download and treat them with PhotoShop. Then, I use a card reader to load them onto an SDHC card, which I then put in the camera. The question is to know if I'll be able to see the images on the screen of the device changed.

  At the time, YES. When you take a card with pictures of the camera & watch on your computer, you will see a folder called DCIM, and in this folder, you will find a (variable name) with your images. Replace images within this folder & the camera will see them perfectly.

• Conversion of files to edit in Photoshop

  So I have a Nikon D7200 and since purchase I have to convert my DNG files to modify.

  Since I have done 6 Lightroom I can now display images immediately - usually my computer said that it could not read the NEF file - and I can now change in LR6, yet I still can't edit them like raw files in Photoshop CS6.
  I was wondering is there something I can download - as a plug-in? - or am I condemned forever to convert to to edit in Photoshop?

  Thanks in advance!

  Hi beth,.

  I suggest you to please update Camera Raw to the latest version of Camera Raw 9.1.1 from the following link: Camera Raw of Adobe Photoshop CC and CS6 Installer

  Once done, then please try to edit files.

  Kind regards

  Tanuj

• Open a jpg file in adobe photoshop.how to change the existing text?

  Help, please

  You can not. A jpeg file is a flat file. The text is part of it.  If it was on a University background, you can erase and replace, but if the background has detail, then not much you can do.

  Gene

• How can I make a vector logo in Photoshop?

  Hello, can someone me tutorial provide how vectorized logo or make the jpg to vector? Thank you

  In photoshop on what you can do is create a new layer and use the pen to draw the lines of the image. For what it is more automatic, you need an application like Adobe Illustrator has a feature autotrace.

• Photoshop - artifacts on Vector Image smart object

  Hi people,

  This is my first post. There may be a response to this somewhere on the forum already, but I can not just understand the search terms to use because the question is so specific.

  I have an image that has been live traced in Illustrator, then placed in a Photoshop document. The photo was traced to the highest possible fidelity in order to maintain the good detail. It was traced from an image of 72 DPI in order to raise the quality of a print run of 300 ppi. The problem I have is with the anti-aliasing in the dough or the place function (it happens to be) in Photoshop. I copied the part of the vector image and moved the opposite side of the object, as it was necessary for the design and then grouped it upward with the main object. In the image below, I circled the part copied in red:

  

  All sounds good in Illustrator, but when I paste or place it in Photoshop with active anti-aliasing, then a plethora of imperfections arise as wavy lines grey in passing a copy of the vector image, which I hope you will see below:

  

  If it is difficult to distinguish, simply compare the flowers duplicated on top left of the image of the original on the right of the image.

  If I turn off anti-aliasing at the image collage/placement, then these grey imperfections disappear, but the mix of colors and the edges of the leaves and flowers become jagged black background. To this end, I need to have the anti-aliasing feature enabled at the time of the image in Photoshop to maintain high image quality I'm after. The final image below shows what happens to the color of fusion when I do not use anti-aliasing:

  

  I hope someone can tell me what I'm missing here. The problem affects only the part a copy of the vector image. I guess this is where lies the answer, and so must be something that I have to change/do with the original in Illustrator vector so that it copies all information correctly; I don't know what it is that I need to change.

  Thanks in advance, people.

  Ben

  Update: I managed to find a solution, even if I can't always work on what caused the problem in the first place.

  The solution was to duplicate the vector smart object containing the flowers (circled in red in the first frame in OP) I duplicated originally from extended trace. I suspect it's just a quirk with anti-aliasing when you work with vectors in Photoshop. I can't be certain if.