Conversion of LabVIEW 5.1 VI LabVIEW 8.0 or newer

Similar Questions

• conversion of LabVIEW 8.5 in 2012

  Hello

  I'm trying to convert my application written in LabVIEW 8.5 with NOR-traditional Daq OR DAQmx LabVIEW 2012.

  You can find the code as an attachment

  Thank you

  Are you aware of that very specific baord is available for applications for upgrading / downgrading.

  http://forums.NI.com/T5/version-conversion/BD-p/VersionConversion

  In addition, a VI that is created in LabVIEW 8.5 version can be opened in the 2012 version & later recompile (upgrade) it.

  Edition: Find VI improved with DAQmx functions in the attachment.

• float to bytes conversion using labview

  in the project of the University to number of float serialy using labview. I don't know how to convert his individual bytes actualy I want to encode float in its float bytes. kindly help me in this regard

  Send "bytes" is usually done in the form of strings. Just use catalogued with the disconnected type entry (or use "flatten chain").

  To get started, simple would be to use the finder example in LabVIEW and search for serial communications.

• Conversion of LabVIEW download

  Hello

  Can someone help me in converting some files labview 5.1 in labview 8.6-readable files?   I'm ready to do it myself if someone can tell me were to download a converter, but if I need several versions of labview, I am probably out of luck.

  Thank you

  I converted to LabVIEW 7.1 - I think that 8.6 might be able to open and convert 7.1

• C code conversion for labview

  Hello

  As I'm not familiar with C code, can anyone please help me convert this function in Labview (8,6)? See attached txt file.

  Thank you

  LabVIEW 8.6

  This is a very direct translation.  If you know that the length parameter will be equal to the length of the array, then you don't need the length parameter and you can use an automatic indexing for loop, cut just the last element if the parameter 'create' is true.  (Code snippet is LV 2009 but attached VI is saved to 8.6)

  

• conversion of labview 7.0 to 6.1

  I have a set of FTDI labview vi 7 I need converted to 6.1.  They are designed to use a usb dll.

  Thanks, Jeff

  Downconvert requests Thread

  

• conversion of labview in c ++

  Hello

  I'm not an expert in computer programming. So, I choose LabView rather than an other other languages. But I just came across another problem here. The instrument I use takes only c ++ codes, not of LabView.

  Is it possible that I can convert the screw that I wrote in c ++ codes, so that my instrument include LabView programs?

  Thanks in advance,

  Pui

  
  

• Conversion of Labview 5 to 2012

  
  

  Two tips for you:

  1. do not create duplicate messages.

  2 need for a converted VI? Please report to the Office of the Conversion of Version .

• conversion of LabVIEW 2011 to 8.2

  
  

  Click on file and select Save to the previous version , select the version you want and save it (if you have the support 8.2 I guess), otherwise check the jury of the conversion of the version to convert the version of vi

• LabVIEW hangs on create new case of event or change events managed by this case

  LabVIEW crashes everytime I open the context menu for a structure of the event and select 'Create new same case' or 'Edit events processed by this case. "

  I'm running sp1 LV2013. I don't know when this started happening. I have supported existing code so I don't know when was the last time I created a structure, but now it happens every time I do either of the above actions. Needless to say that, now that I need to do this, it's rather prohibitive my quality.

  This happened to someone else? I just need to reinstall LV?

  I feel that I have read of what is going on before, but I can't find the message thread.  CHANGE, just found it.  http://forums.NI.com/T5/LabVIEW/major-error-with-event-structure/TD-p/2700869

  With LabVIEW closed, try renaming your LabVIEW.ini to something else (in this way you still have and can restore it if it does not work).

  Then, launch LabVIEW.  It will create a new .ini file.  See if it works.

  If this does not work, please post your original .ini file here.  It would be interesting to see what setting it could cause a problem.

• Problems during execution of a LabVIEW VI in a new thread under TestStand sequence and execution of the MainSequence in step by step mode

  Hello

  We want to run a VI in LabVIEW (LV2011) at the same time to the execution of a sequence of test of TestStand (TS2010). The VI should view the condition of the equipment, while the test sequence is written in TestStand. It would be a nice feature of debugging the TestStand sequence while watching the State of the material in the LabVIEW Panel, too.

  This is where it's our problem. Imagine that you have a MainSequence calling a subsequence in a new thread, which runs the LabVIEW VI. After the call, the MainSequence continues its progression, as it is configured to do this. But if we want to execute the MainSequence in step parallel execution of VI mode, we can do that. The controls for "Step Out" etc. are grey.

  I tried to build a very simple example to explain what I mean. It's just a sequence and a LabVIEW VI, no real functionality, just take as an example for our problem.

  Any tips? What we're doing wrong? Is there something that needs to be changed in the LabVIEW VI?

  Best regards

  Manual

  You should use the monitor of the termination and the ExternallySuspended APIs for the EIS to running asynchronously. There are screws of wrapper around these APIs in the LabVIEW TestStand palette.

  For more details see using the API for the following:

  Thread.ExternallySuspended

  Execution.InitTerminationMonitor

  Execution.GetTerminationMonitorStatus

  Unless I am struggling to understand what you're asking, if you are using these APIs, you should be able to make it work as you are eager to do things.

  -Doug

• LabVIEW file conversion toolkit

  I have a lot of files in the version of Labview 5.1.

  I can't open it in my version of Labview 8.5.

  Source code in labview 5.1 should be changed after the current requirement.

  I so need a run conversion toolkit labview.

  Attach the file to download.

  I use the windows xp operating system.

  Please, help me at your earliest.

  Hi grugh,

  did you read what I wrote?

  There is a thread upconvert to such request...

• By specifying the screen coordinates in printf using LabView RT 2009

  According to the 2011 help in LabView documentation 'Printf (Manager of LabVIEW function)", the character of the conversion of 'q' is supposed to refer to a point. The actual help text is "q Point (passed by value) as %d, %d, representing the coordinates horizontal, vertical. It is a valid conversion for LabView RT 2009 character? If so, then someone has an example of using these characters to print at line 10, column 1 on the console? I tried a lot of combinations like: printf ("% dqTest Row", (10.1)), etc.

  LabVIEW Real-time has not intrinsically a "console" - it has an "output stream.  There is no API added to allow you to jump all over the console in native mode (don't cross the streams) - you can't even do it with the functions of Manager of LabVIEW (literally, it prints a point in this place of pixel, not text).

  Now, I tell you this, but if you happen to have a target with a video memory (like a PXI system, certainly NOT a cRIO or PCP) and you happen to know the address of where the video memory is on your 0x0B8000 system, you can directly write ascii characters on the screen specific areas - just as they did in the days of DOS.

  #include 
  #include 
  
  void VGAChar(unsigned int row, unsigned int col, char c, unsigned char attr) {
      static volatile char *video_mem = (char *)0x0B8000;
      unsigned int pos = ((row * 80) + col)*2;
  
      video_mem[pos] = c;
      video_mem[pos+1] = attr;
  }
  
  void VGAString( unsigned int row, unsigned int col, char * str, unsigned char attr) {
      int i = 0;
      while (str[i] != '\0')
      {
          VGAChar(row+(col+i)/80, (col+i)%80, str[i], attr);   /* print each character */
          i++;
      }
  }
  
  int main (void)
  {
      char buffer[ 100 ];
      sprintf( buffer, "Hello, my DOS world!" );
      VGAString( 10, 10, buffer, FOREGROUND_BLUE | FOREGROUND_RED );   // prints in PURPLE at ROW 10, COL 10.
  
      return 0;
  }
  

  Of course, I don't condone this and it is certainly NOT taken in charge (and only works on targets based on the PharLap with a video console), but there is a lot of fun.

  -Danny

• using the module time real Labview in RTAI

  Hi all

  I want to use the module time Labview in RTAI real for real time due to its open source applications and very good performance. is it possible to make this work?

  If this is the case, can anyone introduce a single study of case or something similar to this?

  Cecile says:

  Hi all

  I want to use the module time Labview in RTAI real for real time due to its open source applications and very good performance. is it possible to make this work?

  If this is the case, can anyone introduce a single study of case or something similar to this?

  I don't think it's possible for anyone outside of OR. LabVIEW Real-time supports this time only Windows as host and as a target only material of National Instruments with specifically targeted OSes or the Pharlap ETS system on x 86 systems with hardware specific enough. Using RTAI as target OS for LabVIEW Real-time applications requires first a few changes on the time plugin real LabVIEW to support this new platform.

  None of the files in time real LabVIEW also created for either platforms OR running VxWorks or OS Pharlap, Pharlap ETS system woud be able to be deployed to a system RTAI, because they are not compatible. In the first place, you'd have to port the bunch of shared libraries that make up the time target real system running LabVIEW on one of these goals to your RTAI system which is in fact a whole new platform of LabVIEW you can create with a little effort from the LabVIEW source code. It's not really impossible for OR as most of the code LabVIEW is written platform completely independently, but it would be a combination of the parameters compilation for course LabVIEW Real-time, with the settings to produce time targets real LabVIEW VxWorks with some additional settings of Linux. Yet, it would be by far not trivial and some parts are actually hardware specific drivers that must be worn too and limit the possibilities of what RTAI material could serve even further. In short not something that would make any commercial sense NC because they invest a lot of resources with no opportunity to sell additional hardware.

  And hell freezes over up front release of NI LabVIEW source code in any form which gives access not - OR used to it!

• 1208fs for labview 10 usb connection problems

  Hello
  I'm relatively new to Labview and just improved labview 10. I used 6.1 before and had no problems using my mcc Board of 1208fs USB to run experiences before. I tried to connect even to labview 10 on my new computer, and the only thing that will connect to the instacal is. Ive plugged throu instacal, but is not visible in the list of I/O that selects the channel to use. Any help would be appreciated.

  Thank you!
  Andrew

  By the way, my os is windows xp

  Andrew,

  MCC daq devices have a different set of drivers for LabVIEW 8.2.1 LV versions and newer.  See http://www.mccdaq.com/daq-software/universal-library-extensions-lv.aspx this is ULx.

  I have one of the devices USB-1208 and discovered very recently this issue when I wanted to use it in a LV 8.5 application I wrote.  The new driver is actually nicer and DAQmx drivers a little resembles the way you use them.  While the former pilots of the Universal Library for older versions of LabVIEW looked like using traditional DAQ hardware drivers of OR.