Conversion of library user is taken a lot of time

Similar Questions

• Battery ThinkPad Tablet has taken a lot of time to fully charge

  As the title says, when the battery remains below 20%. It took more than 20 hours to fully recharge the battery which is impossible for me to use every day.

  But sometimes, it took only about 4 hours to fully charge which happens rarely.

  So, I think that it is a software issue more to a hardware problem.

  And it has past since day 1 I buy the machine.

  Can someone recommend me?

  Help is very much appreciated and I thank you

  Make sure that the Tablet is completely off while charging. Use the cable adapter and USB OEM power. If the slate does not detect the right brick cable/power he can enter a fully compatible USB mode, drawing only 0.5 Watts and this means a slow, very slow, process leader, who, in fact, can last up to 20 hours.

  If all else fails, buy a dock. It is not very expensive and, from what I've read, it's worth the money.

  So, make sure you have all updates applied. I found no information on OTA you run on your computer, but if you think it may be a software problem, it's the best way to get an answer. Updates are very valuable and will make your slate run faster. 2 OTA has an update of the firmware of the battery, and it can also be useful.

• Y at - it a library user templates were created and displayed their models to?

  Y at - it a library user templates were created and displayed their models to? Thank you.

  
  

  < email published by host >
  

  Hi Dennis,

  Do a search on the web for numbers Mac models. Many sites offer them for free.

  In addition, numbers will open the documents and templates Excel and converted to the format of the numbers.

  Kind regards

  Ian.

• Can we call library user directly labview vi in teststand?

  Hello

  I'm calling one of the libraries of the labview teststand user directly. I get errors when running (Catpure.png attachment).

  If I create labview file and use this library vi in labview with same entries that then use this labview in teststand, and teststand is happy (capture2.png, capture3.png).

  I would like to know if I can call library user directly labview vis in teststand or should have create my own vi call this lib from there? Can someone let me know?

  Kind regards

  Hema

  Hi Hema,

  In general, screw calling for a Bachelor's degree in LAW (LabVIEW library) TestStand works very well. I have attached a sequence that makes calls to a VI in a Bachelor's degree in LAW and a VI out of one. This works as expected.

  The error you get is probably the result of another problem. Please add more details about the error, the versions TestStand and LabVIEW, you use and if you have set the LabVIEW LabVIEW RunTimeEngine adapter or LabVIEW Development System.

  PS: The image you attached shows the setting for the call of VI step and it seems to be loading fine (no provider indicating a loading error error). If the step throws an error only when executed, then attach a snapshot of the error dialog box that is displayed or the report that has the details of the error.

• Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  I use the version of Vista Home Premium.

  While I don't really like how the UAC area enters the information that tells it when to display the box tell me about your work of things on the UAC (I know an article exist on the web), is not how to answer this question.

  There is no log of UAC elevation file.

• I am a user of Picasa for a long time conversion to Lightroom.  I share photos with dropbox on a MAC, a Windows computers, storing images and the catalog in dropbox.  I'm able to share the LR catalog, but on the second system images can be found as s

  I am a user of Picasa for a long time conversion to Lightroom. I share photos with dropbox on a MAC, a Windows computers, storing images and the catalog in dropbox. I'm able to share the LR catalog, but on the second system images can be found as a prefix system DB files have different user names. Any ideas?

  At the point of Lightroom to another location for photos, follow these instructions:

  http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  Note: If the catalog is constantly being synchronized to DropBox, you will most likely follow these instructions whenever you open the catalog on another computer.

• Table statistics generation takes a lot of time in 10g R2 (10.2.05)

  Hello Oracle Experts!

  Need your urgent help...

  Question - generation of Table statistics takes a lot of time in 10g R2 (10.2.05) and even ends in mnts in a different database. As well the database are hosted on the server VM, RAM, CPU, storage and database initialization parameters are the same.

  Table - size 34 GB

  Name of the table - SLPDOCTAX

  SQL - exec dbms_stats.gather_table_stats (ownname = > 'FAST', tabname = > 'SLPDOCTAX', estimate_percent = > 30, cascade = > true, level =)
  (> 5, method_opt = > 'for all COLUMNS INDEXED' granularity = > 'ALL');

  Measures taken so far-

  1. 1) checked the IO by the dd, no problems on the side of DISK command
  2. 2) use memory and CPU as normal

  Please advise what measures must be taken to solve this problem

  Dear all,

  We have identified the problem... It was the index and even has been resolved by rebuilding the index.

  Rgds

  Farvacque

• Cut 1,000 LP records in securities - the simpler procedure and not a lot of time

  Dear friends,

  in the national and University Library Slovenian we would save in digital form and do the restore at least 1000 LPs. We save our LPs on our hard drive. We would then cut them into smaller units (securities). Does anyone know the simplest procedure and not a lot of time in Adobe Audition?

  For example:

  Our LP has 15 tracks. We would like to cut the LP in 15 units and if it is possible do the fade and fade out for each track at the same time. Is there any AutoPlay to make faster (not a lot of time)?

  Thank you for your response.

  National Library Slovenia wrote:

  We decided to keep the original files because they are (saved on the hard drive) and do no repairs (for example a hiss reduction, clik and pop eliminator...).

  1. we want to mark the silences between tracks (we decided do not fade and fade out)

  It's the easy bit. You select the audio with the track you want and highlight it, and then press F8. This will mark this part of the file as a "cue range" in the list of markers. It's quick and easy to make by hand, and hardly useful to automate. The reason is that you verify the results of an automated selection silence anyway (it is not infallible, especially on a file untreated LP), and audit would easily take both that just do this manually (a few seconds work). When the selection is displayed in the list of markers, then you can give it a name. If you don't want to give it a name that is fine - but even if you will without a doubt index this anyway, I still would do it, simply because it is without ambiguity.

  2. and then find ther simpler and faster procedure to record the tracks with ther of individual names (example: track_001.wav, track_002.wav, track_003.wav) in a single folder. Is it possible to make the second stage with a single click?

  Now you have a list of beaches of marker in the markers list, you will find that there is a button of batch process at the bottom that you can use. This will automatically save each of the ranges mark marked in a separate file, either using name information that you have entered, or by using the schema that you mentioned above. You can choose the prefix - that could be the name of LP - and it is the tracks sequentially from any number you choose - so if you do the second side of the LP, you could start with, say, {lp-name} _006.wav. The only other thing you need to do is where you want to save the files.

• Firefox has become very slow. It takes a lot of time to load any website. I reinstalled FF but the fleeting problem.

  Firefox has become very slow. It takes a lot of time to load any website. I reinstalled FF but the rest of the problem.
  As a test, I downloaded Chrome and it is much faster.
  But I love FF and would be very happy if you can help me solve this problem.

  Hi Reos,

  When you reinstall Firefox it always uses your old profile with all the old things that you had. That said, you're lucky, there is a new feature that lets you "Reset" of Firefox. This will remove some of the pieces that might cause problems while it keeps your bookmarks and other important things safe.

  Check it out and let me know if it works: Refresh Firefox – reset the parameters and modules

• Calendar view-only and users are unable to change the time.

  We use Windows Server 2003 R2 active directory and group policy.

  Group Policy, we blocked sytem time change but after this timetable can also test block user cannt read calander also

  pls sugget me to resolve this issure

  Calendar view-only and users are unable to change the time.

  Hi sunil77,

  Your question about changes in UAC using Group Policy on Windows Server 2003, it will be better answered by the experts in the Group Policy Forum. Please repost your question to the address provided.

• When I turn on my computer until the start menu is ready before I click on internet, it really takes a lot of time

  When I turn on my computer until the start menu is ready before I click on internet, it really takes a lot of time. Why?

  Hello

  Did you do last changes before the show?

  I would like the season you follow the steps in the link and check if that helps.

  Method 1: Perform a boot clean and chcek if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Once the diagnosis has been made, make sure you try the step to configure Windows to use a Normal startup state in the article in order to reset the computer as usual.
   
  Method 2: You can also check out the link and check if it helps.
  Advanced Troubleshooting for General startup problems in Windows XP

• How many user take RDP at the same time with different user login ID in Server R2 2012

  How many user take RDP at the same time with different user login ID in Server R2 2012?

  How many user take RDP at the same time with different user login ID in Server 2008 R2?

  How many user take RDP at the same time with different user login ID in Server 2012 starndard?

  How many user take RDP at the same time with different user login ID in Server 2008 standard?

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Windows 7 and update MSSE take a lot of time

  Hi, I have reinstall my windows 7. But, when I try to check the updates he comes to see the verification of updates for a long time. I'm trying to update Microsoft Security essentials too, but it just search for updates and it takes a lot of time too. But, when I restart the Windows Update service, and then start the download of the Microsoft Security Essentials updates and install it, but not for windows, it keeps looking for updates when I try to update. Microsoft Security Essentials does not download the update that automatically even my computer is connected to the internet, I have to press the Refresh button on MSSE, and sometimes I need to restart the windows update service too.

  When I do the update for windows for the first time, Windows update tell me to install the Windows Update Agent 7.6.7600.320. And install it.

  Please, please help. Any who...

  See: search for Windows updates takes forever?-a possible solution

  See also Windows 7 update holding scans always? KB 3153199 can solve the problem

  ===

  Update Microsoft Security Essentials FAQ

  Microsoft Security Essentials consolidated FAQ

  Troubleshooting General error while updating

• How do to this chain operation looks simple but causing a lot of time to do :)

  Hi all

  I have a very large chain, i.e. the soap xml response send by server that I read once connected to the server using http, now the problem is that I need to create a Document out of it and analyze what is simple but the answer I get server requires many replacements of string as example 1) replacing "<" with "<"  2)="" replacing="" ">"="" with="" "="">" etc before creating a document out of it now there are many such replacements in the sending of the response from server that takes a lot of time. 5 minutes on the emulator. So my question is how do? Is there a native method to replaceAll occurrences of a substring in a string or while I can use or is there another good way? Please let me know thx.

  Thank you

  Sagar

  We took over a project done by someone else, and they were doing exactly what you do.  Here is their source, which I think is more effective that you give it a try if you want.

  But be aware that I have never used or tested this code.

  I guess you pull that string to the center of your SOAP response.  It has been encoded XML.  So you can do what we did in this case and wrap the string as a data element in an XML element and then use the XML parser to get the actual data, which feed us an XML parser again to get the actual data.  XML is already set up to deal with these characters, so it was more effective than the approach to replace.  Actually to be honest, it wasn't the reason we exchanged, that as part of the parser XML meant we were convinced it was done correctly.

   public String replaceAll(String source, String pattern, String replace) {
          if ((source != null) && (pattern.length() > 0)) {
              final int len = pattern.length();
              StringBuffer sb = new StringBuffer();
              int found = -1;
              int start = 0;
  
              while ((found = source.indexOf(pattern, start)) != -1) {
                  sb.append(source.substring(start, found));
                  sb.append(replace);
                  start = found + len;
              }
  
              sb.append(source.substring(start));
              return sb.toString();
          } else
              return "";
      }
  

• Windows 7 by taking a lot of time to start!

  Dear Sir.

  I have a few questions here, and I hope that someone could help me with them. my laptop in the first days it takes only about 30 seconds to start windows, but now I need more than 90 seconds to start windows. I have the machine of SONY (VAIO), model number is CPCCW2S1E. I need to know what takes a long time for the computer to boot. and I would like to know whether the registry is incharge somehow on this subject. I work with photo and video stuff, I always install and uninstall programs, so I thought that maybe make my pc speed. and if the regestry is incharge thereon, is there somehow or no software to clean the registry database or to do something? If there is no recommended program, let me know please...

  Thank you

  Is your system error free?

  To access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click header to sort on the Date and time. You may need to click a second time to see the last report above.
   
  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. In the window, you will see a button resembling two pages. Click on the button and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  I suggest you download Process Explorer.
  For more information about Process Explorer, see here:
  http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx

  This freeware utility performs a similar function to the Windows Task Manager, but it goes much further.

  In process Explorer, please add a column. Select View, Select, columns, process, performance, and check the box before the start time. Then, select "Show processes from all Users" and click on the 'Start Time' column header. This will sort so that you can see start with the first sooner. You may need to click twice or three times.

  On my Windows 7 machine, the first point I see is smss.exe = Manager of Session. You should then see a long list of items over a short period of time to load. The boot process is not responding on my computer with two files AVG loading (my anti-virus is AVG 10. Before these two files is a file uns.exe that loaded this morning 2 minutes and 20 seconds after smss.exe. USN.exe is a file of Intel, so may not be on your computer.

  
  Questions. How long it take to smss.exe loading to the main files to load? What are the files that arrive at the end, and how long does it take so that they appear after smss.exe?

  Can you also detail what anti-malware software is installed?

  Hope this helps, Gerry Cornell