Conversion of thick disks into thin, but not for any space back

Similar Questions

• Driver Iomega for citizen Floppy more works for floppy drive, but not for memory cards.

  Original title: HELP?

  Driver Iomega for their citizen disk more.  Œuvres for floppy drive, but not for memory cards. CF/Micro drive.  He is listed, but does not work.  Any suggestions?    use of PSE * address email is removed from the privacy * got here but don't know how.   Thanks in advance.  PS Lost the cable to use this method.   Best regards 73 or 88

  Hi Leon S.Dorr,

  You can get in touch with Iomega support to get the correct drivers for the card reader.
  https://Iomega-na-en.custhelp.com/app/answers/detail/A_ID/14408

• MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE).

  MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE). Everytime I put a dvd movie it plays automatically, but any other type of cd it will say insert disk. One has had this problem?

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ----------------------------------------------------------------------

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Disk hard online, but not visible in Windows Explorer

  Hi guys, I need a little help.

  Today, I installed an old 80 GB Maxtor Diamondmax 10 PATA hard drive on my other PC, a Dell Inspiron 530, as a second HDD. I had to order new parts to connect actually upward from the power supply and motherboard SATA and IDE connections are not, but all those who are working very well.

  My problem is that this Maxtor drive does not appear in Windows Explorer. BIOS, see Device Manager it disk management he sees (and even said it's online). Just not Windows Explorer.

  In disk management, it is not a drive letter assigned to it, and when I right click on the disk partitions, anything but 'Delete the Volume' and 'Help' are grayed out. (Screenshot here: http://i39.tinypic.com/2ujpbeo.png)

  I'm a bit stumped, it's almost like I can't use the drive at all. Any ideas?

  Here's some more information about the system:

  OS: Windows Vista editions Home Premium (Build 6002, Service Pack 2)

  BIOS: Phoenix AwardBIOS review 1.0.18

  Motherboard: Foxconn G33M02

  CPU: Intel Pentium Dual-Core E2140 1.6gHz

  Memory: 3072 MB DDR2 SDRAM

  First HARD drive: 250 GB Hitachi SATA sister

  HARD drive secondary: 80 GB Maxtor Diamondmax 10 PATA (with jumper set to "Master DS")

  GPU: ASUS EAH4670

  And I should add, just in case... This is PATA to SATA card, I use the drive: http://www.ebay.co.uk/itm/320759737706?ssPageName=STRK:MEWNX:IT & _trksid = p3984.m1439.l2649

  And I just use a SATA to Molex cable I found to convert the power.

  Thank you

  Hello

  Thanks for this info. I looked more into filesystems and it turns out that the disc was either FAT or NTFS - it was EXT2 which is a Linux file system. I found this by starting Ubuntu that supports multiple file systems.

  I didn't format it had data on personal, but I found an EXT2 driver and can now browse the Windows hard disk.

• Why Canon does not have old adapters for my SLR camera lenses? I can get them with Sony, but not for Canon

  I have an old Canon Ftb with a goal of 1.4 fd. I'm getting into digital cameras now (just to have a 12 G for now, mainly used for underwater photography). I would like to stay with Canon, but I'm very annoyed that Canon doesn't have a way to continue to use their old lenses. Nikon, for all their flaws are much better at you can continue to use your old stuff.

  Then I find that if I'm going to Sony (Yes, really, Sony) can I use my lenses from Canon ol via an adapter. This my Canon, tell me it ain't so. You must have a way, I just have not yet discovered.

  There are many challenges with this and the "adapters" are to be considered with a certain scepticism.

  The FD lenses are mechanical - no electronics.  The case of the unit, on the other hand, has an electronic interface for the lens - nothing of mechanics.   This means that if you set the goal, you would have to manually set the aperture but also of manual focus of the lens.

  Your Canon DSLR had a split Prism focusing in the viewfinder to help.  A new camera does not work.  The reason why there is no help from the development is because most of the lenses are autofocus so it is simply not necessary.  This makes it particularly difficult to tell when you've worn exactly the goal.  Making it even more difficult is that any device with a sensor size of APS - C (most of them) have a small viewfinder that you had on your Canon SLR photography.

  In addition, the lenses are optimized for a specific back focus distance.  Canon's EOS cameras have a depth of 44 m from the mounting flange of lens at the front of the body at the level of development within the body.  When you use an adapter, it modifies that distance.  If you change too much, the lens behaves as if it is mounted with extension tubes, the entire range of focus is moved closer to the camera, and it can be is no longer able to focus to infinity.

  There are 3 parties that make these lenses... conversion kits but they do them for a few drinks (not all) and that they require a bit of surgery on the goal (e.g. this level which protrudes beyond the rear of the lens used to set the aperture value should go).

  But... the modern lenses are just so much better than the old FD lenses.   Requires really quite the dozen FD lens to make it interesting this fuss.  Also, I own a Canon SLR (AE-1) and a few glasses of FD... but have no interest in trying to use one of these lenses on my EOS DSLR cameras.

  I think that this question almost as Ford asking why they do not wheel adapters let wheels it T model mount on a Mustang of 2015.  The new wheels are so much better than the old wheels, you want to continue to use the old wheels.

  Leave your old lenses in the past.  Mine are on the shelf alongside my AE-1... body as a conversation piece.  I don't actually use them.

• Conversion from 2D to 3D work is not for me

  I'm trying to follow the tutorial "2D to 3D Conversion" and it "does not for me."  When I open the image «archer...» "I don't get many layers, but only the background image, and therefore no 3DAxis widget is displayed.

  It's my first try at this, and I'm stuck trying to figure what the problem is.

  I use Adobe Photoshop CS4 Extended, version 11.01 under Vista with 4 GB of RAM, 500 GB HD

  2200 MHz processor speed

  NVIDIA GeForce 7100

  Memory available for PS 3255 MB

  Memory used by the PS 70%

  If someone could please point me in the right direction, I would be very happy!

  Christian

  It can work with the background layer very well, go to 3d-> new shape from layer-> cone (or other), and then select one of the 3D tools and it should appear. Note that this OpenGL drawing must be enabled in Edit-> preferences-> Performance in order to see it.

  Using the 3D axis: http://help.adobe.com/en_US/Photoshop/11.0/WS0FB519CE-94B2-44d0-AFBE-7227747D20B9.html

• Some e-mail comes to the iPhone but not for Mac

  Recently some, but not all, mailed to one of my two email accounts (not account "me.com" but my local ISP) happens on my iPhone but not on my Mac (both devices to the newest OS Help). I see nothing in the settings, system preferences or any other which may explain the problem.

  What this account setup? IMAP? POP?

• HP Envy 15 x 360: Audio, sound recording, but not releasing any

  Went to this for an hour and I tried all the previous solutions. I've updated, uninstalled/reinstalled, restart the computer, shoot bad, etc., but nothing seems to solve my audio. It is not a problem with the headphones as with or without them audio does not work. I think it's a problem with the speakers, but not quite sure.

  Product name: HP ENVY 15 x 360 PC
  Product number: J0E41AV
  Serial number: [personal information deleted]
  BIOS (Configuration):F.24-11/28/2014 (0978100000405F00000420180)
  Keyboard Review: 89.22
  Total memory: 8.00 GB
  Name:Intel (R) Core i5-4210U CPU @ 1.70 GHz processor

  Hi @mnma88 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your computer laptop HP ENVY 15 x 360 and questions with no sound. Here's a documenton troubleshooting sounds if you need it.

  Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  Please let me know how it goes.

  Thank you.

• NEITHER USB-9162 driver works for MAX and SignalExpress, but not for LabView

  Hello

  I looked for a solution for a while now. According to Web sites OR the NI USB-9162 is compatible with LabView 2012. I installed the last DAQmx. My hardware has been detected and is sensitive to MAX and works very well in LabView Signal Express. But it is not detected in LabView 2012. I searched the forum and not found any solution other then all uninstallation and reinstallation of any. It is quite conssuming time and would rather avoid if possible. Anyone have a solution? I wish I could appreciate.

  Tool:

  NEITHER USB-9162

  NEITHER RIO-9215

  Benjamin

  I reinstalled everything, and now I can work with it. I can't say that I was wrong on the first time, but now it works very well as well as other bugs that are now set.

  Thank you for your answers

• I bought windows 8 (blue cover) no license and the disk key is writtin NOT for RESALE. It comes

  I bought windows 8 (blue cover) on eBay at the price of 50 euros, and when I tried to install it, I discovered it's a backup disk and it comes without a license key.

  Also on the center of the disc is written (NOT for RESALE).

  The question is the seller have the right to sell an only not for resale Microsoft product?

  Thank you

  I bought windows 8 (blue cover) on eBay at the price of 50 euros, and when I tried to install it, I discovered it's a backup disk and it comes without a license key.

  Also on the center of the disc is written (NOT for RESALE).

  The question is the seller have the right to sell an only not for resale Microsoft product?

  Thank you

  No, it doesn't have the right to sell you software NFR and if he hid this information, then its wrong.

  Your best decision is to try to get the refund by the dealer, then report him. If it doesn't, don't threaten them. Simply report them to ebay and report to Microsoft Piracy.

  Make sure that you have received as proof of purchase.

  Replica, counterfeit and unauthorized copies policy objects

  Statement of Microsoft piracy:

  Protect yourself against piracy

• vShield tab is empty for me but not for others. Do you think things are correctly defined

  I have a weird. In vsphere client (desktop) when I click on the tab my vshiled I get the original certificate screen. However, after accepting the screen remains empty. He appeared for a few minutes yesterday, but does nothing for me now. However, it does not for others in society, same network segment, etc...

  

  The settings of your client may be...

  Something to think off:

  -Disable the enhanced security of Internet

  -Add your vCenter to the trust box in your browser

  -Lower the security settings, etc.

  I think that something you can't see the screen properly.

• Why the HDR toning work with some pictures, but not for others?  I have CS6.

  I have Photoshop CS6 and when I go to HDR toning, it is only highlighted for work with some photos, but not others, why?  Thank you.

  HDR toning does not work with CMYK images. Change the RGB color mode, and then you will be able to use HDR toning. It also works with the color to grayscale mode.

• Image is described in IE, but not in any other browser

  This image of type "Facebook on Waterkeeper" is not supposed to be exposed but is exposed when I display in IE.  It does not reach any other browser and should not.  Anyone know why this is happening?  http://www.iewaterkeeper.org/  Thank you, any help is appreciated.

  Add the following line at the end of your stylesheet

  an img {border: none ;}}

• Student, but not for the year

  Hi, I wonder if I can buy the student Plan and use Adobe Creative Cloude for commercial reason, even if I am a student but I will finish my studies until the year 2016 (then I'll be is no more a student during my Adobe student plan), but today, I am a student in full-time. What do you think?

  Concerning

  Christopher

  Hi Christopherk53625733,

  Kindly the following conditions:

  Student software discounts, eligibility student | Adobe

  Creative cloud for education. Educational institutions

  For any other information, please Contact Customer Care.

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• hitTestObject works for a mc but not for the other

  Hi - I've given instance names to two movieclips for 'bee' and 'energy '. When I sling the 'ball' upward and it hits the bee runs all the code but when I sling and hit energy, nothing happens. Thanks for any help.

  function onMyEnterFrame(evt:Event):void

  {

  Bee.x += 1;

  If (bee.hitTestObject (energy))

  {

  trace ("Energy");

  beeHit = true;

  Energy.Visible = false;

  Power.x = energy.x

  Power.y = energy.y

  this.addChild (power);

  }

  If (bee.hitTestObject (ball) & & beeHit == false)

  {

  trace ("Gotcha");

  beeHit = true;

  Bee.Visible = false;

  pop_mc.x = bee.x

  pop_mc.y = bee.y

  this.addChild (pop_mc);

  }

  }

  You might be experienciung some confusion with your names in the coding.  I don't see anywhere where the ball is checked to a hitTest with energy... the first conditional tests if bee hit energy, no ball.