Pack k - lite codec is safe?

Similar Questions

• After installing the K-Lite Codec Pack 10.3.5, WMP cannot be found.

  After you have installed K lite my WMP cannot be found - when downloaded WMP to re - install the system said that already there is already a new version WMP... I don't understand. can not play all files with WMP - so, where is this WMP? pls help

  Original title: k - Lite Codec Pack 10.3.5

  Hello

  Apologize for the delay in response. It seems that you are unable to locate the Windows Media Player application in Windows Vista computer.

  Check if you can activate the application ON the WMP in the section "turn on or off Windows features" in the control panel as mentioned in the following article:

  Turn on or off Windows features

  I hope this helps. Back to us for assistance with additional information on this issue.

• ABC Player Lite use is safe?

  Hello!

  Sorry for the dumb poll question, but not everything I own Apple Player play. So I downloaded ABC Player Lite, but seeing how there is no notice, someone can share experience - is - this software safe? I mean, not spying on me?

  Download player VLC reliable and respected on its official website: https://www.videolan.org/vlc/index.html

  If it does not play a specific media type, then you probably don't want play anyway.

  Never download software that you wouldn't take a careful research on and know that he respected and trusted.  I personally NEVER download software without significant research about its reliability and especially never download software with no rating and no prior knowledge.

• How to fix error with vista service pack 1 - cannot reboot in safe mode or regular

  tried to download vista sp1 - cannot start in safe mode or regular - enabled more than an hour to download - black screen-a chosen start normally - tried to start - at least 35 min. with the screen - in the suite! oxco1a001d! 28802/95712-{Registry\machine\components\DeriveData} - then tried to start in safe mode - says something was wrong - ran progran details - leaving - help, please4

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and read this:

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• XviD codec is safe to download and use?

  is download the xvid codec safe

  XviD is a video codec that is popular. It is safe, but be sure to only go to the software manufacturers website to download.

  You can get Xvid here (a mirrors for download):
  http://www.XviD.org/downloads.15.0.html

• Descargar Despues no con softonic, package K-Lite codec, no puedo run, porque me dice that are incompatible

  Of me el sistema as incompatibilidad hay, pero no me dice which are the respond.

  Someone can help me?

  Gracias

  Hello

  This forum is only for the English language - use the forum for your language, please.

  (este foro're solo para el idioma Inglés - usar el foro used knew idioma, thanks.)

  Here is the link to your forum (Aqui esta el enlace para su foro):

  http://answers.Microsoft.com/es-ES/Windows/Forum

  LC

• latest drivers and codecs for my hardware and software on my computer

  Question No. 1, how can I know if I have the latest and greatest drivers and codecs for all my software and hardware? Question #2 so I have later where can I find them?

  Start > run > type MSinfo32 > hit enter and wait.

  Take note drivers and their index numbers

  (1) for audio: go to the computer manufacturer's website and check the drivers for your machine. Video: do the same thing, unless you have a PC with a separate card. In this case, go to the nVidia or ATI Web site and get the latest drivers from there. Codecs: Download and install the pack K-lite codec free or similar.

  (2) Google is your best friend. Search: Support... PC/laptop do... »

  See you soon,.

  Jerry

• Error 0x8000ffff trying code désenregistrez the codec file iac25_32.ax starting from the command prompt (cmd.exe)

  My Windows DVD Maker seems to hang after I click the button 'Next', so I looked in my event viewer for more details. I met that a failed module named 'iac25_32.ax' is the source of my problem. To remove it, I went to my command prompt (cmd.exe) and enter the following text: "regsvr32 /u iac25_32.ax' to try and unregister the codec file.

  Here is where my problem occurs: Once I hit enter, I get an error code reading - 0x8000ffff. Why won't my order process?

  Characteristics of code error : "iac25_32.ax" module was loaded but the call to DllUnregisterServer failed with error 0x8000ffff

  How can I solve this error 0x8000ffff code?

  Note that attempting to unregister a DLL that is not registered currently produces a similar to the following error dialog box, regardless of the version of Visual J ++ was used to create the DLL:

  RegSvr32
  DllUnregisterServer dans...\Project1.dll failed.
  Return code was: 0x8000ffff

  FIX: onCOMRegister not called for the VJ-Generated COM DLL
  http://support.Microsoft.com/kb/223339

  Have you ever tried save this file?

  "iac25_32.ax" is a DVD MPEG-4 filter, as it is not a .dll file or not an .ocx file, perhaps it can be saved or unsaved in all cases, but other seem to suggest so it could be possible?

  create dvd Windows has stopped working
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/98fde193-d4e6-417f-8b37-16661e6c6a3a

  Here are a few links of Codec.

  Vista Codec Package Final v5.4.3
  http://www.MajorGeeks.com/Vista_Codec_Package_d5326.html

  Basically, the K-Lite Mega Codec Pack is going to play all video files on this planet.

  K - Lite Mega Codec Pack
  K - Lite Codec Pack Full (less features)

  K - Lite Mega Codec Pack 5.6.1
  http://www.free-codecs.com/download/K_Lite_Mega_Codec_Pack.htm 

• New issues of Fuze/Media Converter

  I got a 8 gb Fuze for Christmas. I'm running Vista, and everything was fine with the "rocket" until I tried to put videos top. Everything is installed correctly, I've got the media player 11 and run the converter in compatibility mode with XP sp2, all drivers seem to be good, and I downloaded several different quicktime codecs and have finally fell down and downloaded quicktime itself (boo hiss apple) to get the required codec. Whenever I try to add a video (format is .avi) it crashes. Anyone have any ideas? Any help would be appreciated.

  Thank you

  Thanks to another post on this forum, I was able to solve my problem. to convert the .avi files, I need to download and insall the pack k - lite codec. Thank you all for the help(sarcasm == wonderfull)

• Try to burn DVDs - software decoding error message

  When you try to burn a DVD from Director of windows, he arrives at 2.4% of the coding and then stops and gives the following error message:

  "One or more files that have been added in DVD maker may not be decoded properly.  Make sure you have decoding software installed on your computer that can decode the different files and then try again. »

  Before these last months, we had no problem burning DVD.  Now, whenever we try, it's the error message that occurs.  I am really a novice when it comes to corrections of the computer, so I'm hoping to get appropriate assistance.  Thank you very much!

  Two possibilities come to mind, is an essential Codec you are missing or if you have a defective Codec installed.

  Look for defective Codecs in MOVIE Maker via the Tools / Options / Compatibility tab.  Remove all entries except the AVI compressor.  See if you get more than 2.4 percent.

  Rule out the possibility of miss some relevant Codecs, discover and download and install something like that and test again.

  Basically, the K-Lite Mega Codec Pack is going to play all video files on this planet.

  K - Lite Mega Codec Pack
  K - Lite Codec Pack Full (less features)"

  K - Lite Mega Codec Pack 5.6.1
  http://www.free-codecs.com/download/K_Lite_Mega_Codec_Pack.htm

  There would also be other causes, then you can try some of these.

  Give Movie Maker a clear race by temporarily disabling all startup programs and Services of third party (non-Microsoft).

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Try System Restore and System File Checker program.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  DVD encode - comes in at 98.9% burned, then fails
  http://www.windowsdvdmaker.com/forums/thread/136.aspx

  Vista - creating Windows DVD fails at 99%
  http://www.Vistax64.com/Vista-music-pictures-video/198083-Windows-DVD-Maker-fails-99-a.html

  Do you have enough space on the DVD for the file, and you have the same amount of free space on the hard disk for the temporary work files (maybe even a little more)?

  This is a FAQ on the Codecs it's Vista related and interesting to read.

  Windows Vista codecs
  http://www.Windows-Vista-update.com/Windows_Vista_codecs.html

• Media Player 11 - fails to read the MOD files

  Using Media Player 11 - had previously played MOD video files from a JVC Everio camera.  Recently, the MP is unable to play the video file.  Do not lock or freeze - just fails to read the file.  (Works with AVI or other files).

  Trying to install a pack of codec as the pack k - lite codec to fix: http://download.cnet.com/K-Lite-Mega-Codec-Pack/3000-13632_4-10794603.html

• MPG file shows that the video has green on windows media player 11 help

  a title says every time I want to play a video file pc mpg, video is green but the audio is fine and my graphics driver is up to date, I'm not sure what my next step please hep me

  E-mail address is removed from the privacy * to answer please

  You may experience problems with lack of Codecs?

  Vista Codec Package Final v5.4.3
  http://www.MajorGeeks.com/Vista_Codec_Package_d5326.html

  Basically, the K-Lite Mega Codec Pack is going to play all video files on this planet.

  K - Lite Mega Codec Pack
  K - Lite Codec Pack Full (less features)"

  K - Lite Mega Codec Pack 5.6.1
  http://www.free-codecs.com/download/K_Lite_Mega_Codec_Pack.htm

• MKV files, show 0 seconds and cannot be seen by sharing.

  Windows media player started randomly showing all my MKV files in 0 seconds. In addition to this, all these files are more able to be seen by the sharing of systems; I have an Archos Tablet and the xbox 360. He worked and nothing has been replaced by the system before they disappeared.

  Since the loss of time on the files and the loss of power to be seen; I uninstalled all codec packs. I tried to install many codecs packs since (Combined community codec pack Matroska and pack k - lite codec) which none have solved the problem.

  The files have been checked with MatroskaDiag and no problems were found with the files. Also, they work perfectly in divx player or if I put them in the section on the part of Vuze with no conversion.

  I was not able to find a solution to this problem online. Although workaround thanks to Vuze works, I prefer to be able to navigate normally through WMP media as it divides it in fact through files lol.

  Thanks :)

  I understand you want to find a solution but if you
  decide to rename the files... the following freeware
  can quickly change the extensions in a batch.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Bulk Rename Utility
  http://www.bulkrenameutility.co.UK/download.php
  (Windows XP, Vista, 7)

  Bulk Rename Utility tutorial
  http://www.bulkrenameutility.co.UK/tutorial.php

  Download and install the utility... (you can uncheck not...
  'Install the Extension of Windows Explorer' and 'install
  Samples)

  Once installed... Open the program and in the upper left
  pane, drill down to the folder that your videos are saved in.

  When you select the file... the video names should
  appear in the upper right. (You will notice... There is a)
  "Name" column and a "New name" column... so you
  can see the changes that will apply.

  First... to... Actions / select all... (you will not see
  changes and you can't rename files unless
  are selected / highlighted)

  In the 'Extensions (11)' section of the screen... Open
  the window menu and choose 'Fixed'... now, type AVI
  in the empty field.

  When the column new name seems correct... left click
  the button "Rename"... then... OK / OK.

  FWIW, you can experiment with a few samples
  (copies) first just to get oriented with the user interface.

  Good luck...

• Videos do not work in the player, multimedia or internet explorer or vlc player?

  Hello

  I've had this problem for about 4-5 months now and my HP pavilion laptop would go blank when I was watching a video, it would then go and say something like 'windows recovered from a display error', then 5 minutes after that I would get the blue screen.

  Now he's come to the point where videos don't work on internet explore (youtube, etc.) or downloaded videos on media player or VLC player, at all. It comes up with a box saying "(l'application soit IE ou MP ou VLC) stopped working and closes down." Video custom make any attempt to appear at all.

  Now, the strange thing is that I CAN watch videos on Google chrome! But not on anything else.

  I am very confused as to why this has happened and no help to diagnose the problem, or better yet, fixing, would be much appreciated.

  What about Andy

  I've had this problem for about 4-5 months now and my HP pavilion laptop would go blank when I was watching a video, it would then go and say something like 'windows recovered from a display error', then 5 minutes after that I would get the blue screen.

  Now he's come to the point where videos don't work on internet explore (youtube, etc.) or downloaded videos on media player or VLC player, at all. It comes up with a box saying "(l'application soit IE ou MP ou VLC) stopped working and closes down." Video custom make any attempt to appear at all.

  Now, the strange thing is that I CAN watch videos on Google chrome! But not on anything else.

  I am very confused as to why this has happened and no help to diagnose the problem, or better yet, fixing, would be much appreciated.

  Uninstall all Plugins Internet (RealPlayer, QuickTime, Adobe Flash Player, Adobe Shockwave Player, Adobe Air, Adobe Reader, Microsoft Silverlight, pack K-lite codec, Java Runtime Environment, etc.) of your computer.  Also uninstall VLC and all other third party codecs or media players that you have installed.

  Restart the computer.

  • Reset Internet Explorer default.
  • If used, reset the default values for Firefox.
  • If used, reset Google Chrome to the default values.
  • If used, reset Opera at the default values.

  [Note: If you don't have any other browsers installed at that time, taste: Mozilla Firefox,Google Chrome and Opera are decent.]

  Restart the computer.

  Install the following plugins:

  • Adobe Reader
  • Adobe Flash Player
  • Apple QuickTime
  • Microsoft Silverlight
  • Java Runtime Environment
  • K-Lite Codec Pack BASIC

  Be careful when installing each of them to NOT install anything other than the application.  No additional software such as bars of tools or scanners virus or other - uncheck options you install (go through the steps of each and READ/UNDERSTAND what you click on!)

  Restart the computer.

  Test the video.

  So - please come back here and reply to this message!

• Windows Live Movie Maker needs to close unexpectedly. error: 0xC9460025

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Sorry, Windows Live Movie Maker needs to close unexpectedly. Please restart Windows Live Movie Maker, and then try again (error: 0xC9460025).

  I get this when I open my saved file, I am changing. It allows to work properly since I installed Windows Live (about 2 months ago). 2 months ago, I bought my laptop. given that Win7 is not a Director as I have on my xp & vista I download this. Gee, this is a version darn downgrade. I've thought since win7 is new version I get a better version of WMM. But no! I'm used to movie maker xp and vista, light and easy to use, but are looking for more that's why I bought win7. Very disappointing! In any case I have not started to use itso until now no problems with my previous published videos. So today, I am in my final cut when WLMM stop working. It crashes and do not continue reading of the saved file. I tried to uninstall the windows live, but it will not be a badge. Cannot be deleted. I tried to fix it by reinstalling hoping it will work but still the same. I also tried to do system restore where I think it works well, but still does not work properly. A suggestion or a solution to fix this problem would be appreciated.

  Please reply as soon as POSSIBLE. I would like to know how to solve this problem or at least how to get rid of windows live. I'll just use another video montage.

  reply to this topic

  nessun101

   

   

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  The material should not be a problem, I usually run Movie Maker on my desk with similar specifications, but I also run it on a laptop of much lower quality. When Movie Maker freezes, just after the opening, after having tried to add a video file, after a specific action?

  If it crashes right after the opening, then it is possible that it is corrupt. You can uninstall, reboot, download a new copy and reinstall, which could take care of this.

  If it freezes after trying to add a video file so the video codecs might be damaged or missing. You can try to install a new audio/video codecs for any type of file you are working with. I heard good things about pack k - lite codec:

  http://www.codecguide.com/download_kl.htm

  You can also try watching the video filters activated in Movie Maker. Go to tools-> options-> tab compatibility. Then try checking and unchecking each filter, I had a problem with them at some point, but I don't remember which.