Convert a continuous line

Similar Questions

• How can I add a continuous line of numbering in documents using Pages?

  I need to put the line numbers for each line in a document that I am preparing for the presentation of a newspaper. How can I make continuous line, numbering of Pages automatically?

  Pages can't do because it is not a TextEditor with a fixed number of characters per line, and there linewrap.

  Use a TextEditor like iText Express or iText Pro or similar.

  Peter

• How to convert an Indesign document and convert a continuous flow word document

  How to convert an Indesign document and convert a continuous flow word document?

  Thank you so much worked perfectly.

• How to convert the column lines

  I need to convert my output lines of sql for the column as a pivot to 11g
  
  Please give me the example of this

  check out this link

  http://nimishgarg.blogspot.com/2010/06/Oracle-pivot-data-rows-to-columns.html

  request for 10g would be

  Select *.
  (select job,
  Sum (decode(DEPTNO,10,SAL)) dept10,
  Sum (decode(DEPTNO,20,SAL)) dept20,
  Sum (decode(DEPTNO,30,SAL)) dept30,
  Sum (decode(DEPTNO,40,SAL)) dept40
  from scott.emp
  Working Group)
  order by 1;

• How do a continuous line when it is absent from the data table?

  I have a graph all the traces, but since there are blank cells on the table there are broken lines. I just need to know how to make them continuous.

  This discussion should be under the numbers instead of MacBook Air?  If so, remove needless zero data points or extrapolation can estimate points which are currently zero, as appropriate.  If zero points are valid results, consider changing a scatter chart.

• In Windows 7 we select several lines of data that are in a different location on the page (no continuous lines) through the mouse or keyboard and also can we copy all lines of these different at the same time to paste somewhere else in one fell swoop.

  > Now I'm unlable to select more number of lines that are not a sequence in a single page to copy the data rows and paste somewhere in one fell swoop.
  > Is this concept implemented in Windows 7. ?
  > Is there a provision (method) to select several lines that are not continuous across the keyboard or the mouse in windows 7?

  Byagaris,
  It depends on what program you are trying to copy and paste into.  You are able to select continuous, multiple lines, by using the Ctrl Key and clicking, or by highlighting the desired line.  For example, I held the Ctrl key and then, using the mouse, has highlighted several different phrases in the various paragraphs, and could then copy them.  This feature is available for several versions of windows.
  If you are not able to perform this action then post what happens when you try and what program you try it.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to convert (multiple) output lines (multi-column)

  
  HII
  
  
  I have a weird request. But not sure how to get results out of it!
  
  
  My query returns two rows to a query I asked.
  
  
  
  Current result
  10
  20
  
  Expected result
  
  10 20
  
  My problem here is that I wanted two values above to be stored in two variables in a single select statement.
  
  
  
  If I use a cursor that my problem will be solved. But I'm not much interested in using a cursor for a simple select statement.
  
  
  
  is there a possibility that I can convert the output of two lines to two columns?
  
  
  
  I use Oracle Release 10.1.0.2.0
  
  
  
  Windows Xp operating system.
  
  
  
  People here will not appreciate the tags 'Urgent '. I know that :-(.
  
  
  
  But some how I'm forced to use this tag "urgent." Sorry for that.
  
  
  
  If no response, I will in another way can go to the slider :-(
  
  
  
  Any help will be appreciated.
  
  
  
  Thank you
  Pavan
  
  

  ??? WITH the clause is just a quick way to produce one on the fly table with your sample data. I think you should do a lot of reading material. In any case, use:

  select  dept,
          max(decode(rn,1,location,null)) location_1,
          max(decode(rn,2,location,null)) location_2
    from  (
           select  dept,
                   location,
                   row_number() over(partition by dept order by location) rn
             from  (
                    your-query
                   )
          )
    group by dept
  /
  

  SY.

• Error when executing the convertersamples.exe for converter Standalone command line 5.5

  Hello

  I use the latest SDK Standalone.  I use the default convertersample file.  Here is my file of properties.

  physicalsource. Address =

  physicalsource. UserName = *.

  physicalsource. Password = *.

  physicalsource. OSTYPE = windowsOs

  physicalsource.agentport = 9089

  physicalsource. Thumbprint =

  physicalsource.reboot = false

  vcserver. Address =

  vcserver. Thumbprint =

  vcserver.username = root

  vcserver. Password = *.

  conversion.job.Name = 1

  conversion.job.Description = This is a work of P2V Windows Live

  conversion.vmtocreate.Name = VM15

  conversion.vmtocreate.vCPU = 1

  conversion.vmtocreate.Memory = 4098

  converterserver. Address =

  converterserver. UserName = Administrator

  converterserver. Password = *.

  After that I run the following command

  c:\Users\Administrator\Desktop\P2V\Upload\ > ConverterSamples.exe submitwinp2vjob.properties

  I get the following error

  To proceed with the connection to the destination server?

  (Enter [y] ES, [n] o or [c] ancel): > y

  Caught exception:

  Name: WebException

  Message: The operation has timed out

  Trace: At System.Web.Services.Protocols.WebClientProtocol.GetWebResponse (we

  bRequest request)

  at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse (WebRequ

  application of the East)

  at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke (String methodN

  SOUL, Object [] parameters)

  to (Ma ConverterApi.ConverterService.ConverterServerConversionManagerCreateJob

  nagedObjectReference _this, spec, Obj ConverterServerConversionConversionJobSpec

  extraInfo ect)

  at ConverterSamples.ConverterConnection.SubmitJob (ConverterServerConversionCo

  nversionJobSpec jobSpec)

  ERROR: Impossible to present the work of P2V Conversion.

  But when I opened the converter I see a running job where it says it will take 1 day 19 hours to complete.

  And I have the following queries

  1. Why do we say it will take so long?

  2. If the work has successfully started why do I get the error when I run the above command.

  3. also the vcenter we use support vmx 8 but the new converter creates vmx10. So, what is the setting in the properties file to specify the converter to use vmx 8.

  Any help would be very useful.

  Thanks and greetings

  Debs

  Hello

  The time-out and the conversion time long expected that both point to a slow network. Check your environment.

  The hardware version of destination is not in the properties file, you must change the code. Search for BuildCloningParams in the program, cs and set targetVMSpec.hardwareVersion to 'vmx-08'

  In general I advise to use improved samples (Re: samples improved c# SDK) they are much more configurable, but in the case of the destination hw version also are not.

  Concerning

  Plamen

• convert string tinto lines

  I am uisng version of oracle 9i.
  
  for my procedure I'll get empid as string that contains data as 100,101,103.
  
  I need to insert data into a table as lines.
  How to do

  Jac says:

  Karthick_Arp wrote:

  DB OP version is 9i!

  "WILL CONNECT BY LEVEL.<= n"="" work="" in="">

  Doubtful... Do not know if...

  I don't have a 9i DB at my disposal and its been a while since I worked in a 9i DB. But I felt that I used it. But as you have doubts I am also bit doubtful :)

  Just checked the document and I can see virtual LEVEL, but did not find an example where his serves to connect BY LEVEL<=>

  To OP, if CONNECT BY LEVEL<= does="" not="" work="" you="" can="" use="" the="" old="" technique="" of="" using="" all_objects="" table="" with="" rownum=""><=>

  
  select substr(str, instr(str, ',', 1, rno) + 1, (instr(str, ',', 1, rno + 1) - (instr(str, ',', 1, rno) + 1))) str
    from (
            select rno, ',' || str || ',' str
              from (
                     select rownum rno, str
                       from all_objects,
                            (
                               select '100,101,102' str from dual
                            )
                      where rownum <= length(str) - length(replace(str, ',')) + 1
                   )
         ) 
  

• Convert multiline single line?

  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
  
  We deal with spatial data from another source to display in our GIS environment.
  
  The data is a set of multiline. The gtype is 2006. A typical geometry looks like:
  

  SDO_GTYPE     2006
  SDO_SRID      31370
  SDO_POINT.X   NULL     
  SDO_POINT.Y   NULL
  SDO_POINT.Z   NULL
  SDO_ELEM_INFO (1,2,1, 7,2,1)
  SDO_ORDINATES (105094.84, 195084.96,
                 105094.54, 195080.22,
                 105094.84, 195084.96,
                 105094.84, 195084.96,
                 105094.68, 195082.47 )

  Now, this isn't a real multiline... it's just encoded as a multiline, but if you look at the details, you will see that the endpoint of the first line is the same as the beginning of the second line (105094.84, 195084.96).
  
  A better way to code this geometry would be:
  

  SDO_GTYPE     2002 <---
  SDO_SRID      31370
  SDO_POINT.X   NULL     
  SDO_POINT.Y   NULL
  SDO_POINT.Z   NULL
  SDO_ELEM_INFO (1,2,1)
  SDO_ORDINATES (105094.84, 195084.96,
                 105094.54, 195080.22,
                 105094.84, 195084.96, <---
                 105094.68, 195082.47 )

  Is there a standard function in Oracle that performs this conversion for me? Or do I have to write my own :)
  
  Thank you very much!
  Rob

  Rob,

  Many ways for this cat with the standard tools of the skin.

  with mLine as (
  select SDO_GEOMETRY(2006,31370,NULL,
  SDO_ELEM_INFO_Array (1,2,1, 7,2,1),
  SDO_ORDINATE_ARRAY (105094.84, 195084.96,
                 105094.54, 195080.22,
                 105094.84, 195084.96,
                 105094.84, 195084.96,
                 105094.68, 195082.47 )) as geom
   from dual
  )
  select sdo_util.concat_lines(l1.geom,l2.geom) as line
    from (select sdo_util.extract(geom,1) as geom from mline) l1,
         (select sdo_util.extract(geom,2) as geom from mline) l2
  union all
  select sdo_geom.sdo_union(geom,geom,0.005) as line
    from mline l
  union all
  select sdo_util.remove_duplicate_vertices(sdo_geometry(2002,l.geom.sdo_srid,l.geom.sdo_point,SDO_ELEM_INFO_ARRAY(1,2,1),l.geom.sdo_ordinates),0.005) as line
    from mline l;
  -- Results
  --
  LINE
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------
  SDO_GEOMETRY(2002,31370,NULL,SDO_ELEM_INFO_ARRAY(1,2,1),SDO_ORDINATE_ARRAY(105094.84,195084.96, 105094.54,195080.22, 105094.84,195084.96, 105094.68,195082.47))
  SDO_GEOMETRY(2002,31370,NULL,SDO_ELEM_INFO_ARRAY(1,2,1),SDO_ORDINATE_ARRAY(105094.54,195080.22, 105094.68,195082.47, 105094.84,195084.96))
  SDO_GEOMETRY(2002,31370,NULL,SDO_ELEM_INFO_ARRAY(1,2,1),SDO_ORDINATE_ARRAY(105094.84,195084.96, 105094.54,195080.22, 105094.84,195084.96, 105094.68,195082.47))
  

  Note how SDO_UNION reorganizes and cleans the linestring which you can't.

  concerning
  Simon

• continuous line under radial grad which fades to nothing so line shows through

  I created radial color that is applied to the circles on white circles graduated from different colors to white (outside centre). But I want lines to pass under the circles so that the line fades in the circle, not immediately cut off as they do currently, IE. the outside of the grad must blend with transparency, not white. Is this possible?

  Please present your results and the mask...

  If you work in RGB, do not use shades of gray. Use only 000 blacks.

• Forest line continues speeds and zoomed out or say NO, but should?

  Here's my simple problem that I can't solve.

  I'll try to be as detailed as possible because I don't know what step needs to be corrected.

  I would like to create a view of the landscape seen by someone on a sled ride down the Hill.

  It starts with a winter in extreme forest clogged then the trees begin to move to the left so slightly, then speed up to the bottom of the Hill and then decelerate and zoom back a fine on the horizon line while slowing, but still moving to the left of the screen.

  How I decided to create this scene:

  1. I created a nice multi file layers in Illustrator with all the trees that overlap between them. The file is the width of the artboard maximum authorized by the Illustrator.
  2. I imported this file multi Illustrator layers into After Effects as a model with separate layers.
  3. I assigned slight movement in the layers of right left at different speeds. He adds a dimension to the view you see a line of trees behind the other at a slightly different speed. This step does not seem to create problems.
  4. I continued in the construction of the continuous line of trees extending to the right by duplicating imported Illustrator layers until I've reached the limits after effects Comp size of the canvas. I think it's to 30000 or 60000 pxls. The reason why I need big trees is because at the beginning of the animation we see at the very end upward with all the leaves and the branches visible. Then the line of the forest begins to move to the left and accelerates.
  5. Finally, it accelerates and zoom at the same time enough to end on the right. At that time, the trees are 50% the size of the screen. Reimport the layers of my tree and perfectly match them the couture and affect the speed and if it continues to pass in front of the Viewer to the left of the scale and I wander into perspective.
  6. And now everything goes wrong. I have perfectly match the original line points of tree and the extra trees limit. I see that well, they affect each other in the beginning of the movement and at the end.
  7. However, unexpectedly in the Middle, they start to overlap and move a little faster. For example: the left end of the second line of forest key the right end of the first line of the forest initially to 10 sec and it touches the same to end at 20 sec. However, at 15 sec it accelerates and directly past the right end of the first line of the forest. I tried to fix it by doing a keyframe to 15 sec and harmonizing again. It has two small jumps 12.5 dry and dry 17.5. If I continue to overlay on between frames the left end of the second line of the forest continues to make small jumps between the two. If I try to set the zoom at the again it messes up everything. I have set up my anchor to the left of the layer.
  8. I thought that the problem is with scale, so I did the 3D layer and began to cut a Z dimension but got the same result. The layers of jump each other and it does not appear as a continuous movement.
     POTENTIAL PROBLEM: I assign simple ease, facilitated in a deceleration, so my acceleration and deceleration were nice and smooth movement. However I tried to match the speed and the speed in the window options Key Frame (double click Alt on PC opens this dialog window) between the original and the extra lines of forest.

  I can't make this line of forest long enough in a static window that I arrived to the limitation of the width of the canvas size after Efffects. I need very large because it starts at extreme close and then zoomed out to extreme and a horizon.

  I can't make a moving line and keep patching up as movement is inconsistent and lines beginning to speed between keyframes and overlap.

  I have the problem, it's the combination of the right side to the movement of the left and the zoom motion (which I tried both ways: scale layer to a 2D layer and the Z Dimension in the 3D layer) but I can't match even the linear speed of the lines of forest from right to left. There may be a problem with how I'm trying to match it.

  I even rebuilt the entire project if anyone can list the steps how make a continuous line of patched up items synchronized, so that they seem like a continuous image line.

  Difficult to really grasp the situation without a few screen grabs, but some general thoughts:

  If all your elements are the vector art in Illustrator, the scale should not be a factor.  Set your Illustrator layers to continuously rasterize, and you get too close you like the layers with the camera and they will be always strong.  So you can work on a set of more small scale and not go beyond limitation of 30000 pixels of AE.  Which also means that you will not need to frame-match two environments.

  It seems to me that you are overloading the work.  Personally, I wouldn't combine camera movements and the zoom - the potential that ranged from focal lengths will be upset something is too big.  I would just do everything with the movement of the camera, using the X for movement left-right axis and Z axis to get close or continue to your subjects.  After Effects cameras simulate the way cameras of real world work, so it is best to approach the work as a real-world situation.  Build the world, and then animate the camera moving in this world.

  Don't forget that you can use Precomposed/Nested compositions to greatly simplify your work.  Make a bouquet of 10 or so trees in a model, and then use this nested pre model several times in your main computer.  Don't forget to condense the transformations of the pre comps.

• Change the default continuous points to line separator

  Hello
  
  I would like to change the separator in the Configurator in a continuous line of points. For example, the line below the page header is a continuous line - I would like to than the separator to look like this. I checked the properties of the splitter, but it doesn't have what we can change. Is there a possibility to create a new UI element that can do the job? I downloaded the screenshot here - http://www.overpic.net/viewer.php?file=x9imps6bfwvpbfjevfchk.jpg
  
  Thanks in advance,
  Biju.

  Biju-

  It would be unwise to invest as much in the development of UI 11i10 that depends on the element separator, as the separator element is not rendered by OA Framework in version 12.

  As an alternative, you may want to consider whether Horizontal Rule in HTML element)

• Columns are converted to lines.

  Hello-
  
  I have a table with 5 columns contains separate lines.
  Example:
  

  COL_A     COL_B     COL_C     COL_D     COL_E
  1051     25000     7/17/2009     7/20/2009     190409949A
  1051     V4581     12/9/2009     12/11/2009     407829924A
  1051     78659     7/21/2010     7/25/2010     403021811A
  1051     72400     8/21/2009     8/31/2009     407381779M
  1051     73300     2/6/2010     2/13/2010     403506467A
  1051     5849     3/23/2010     3/30/2010     402442165A
  1051     6827     9/16/2009     9/23/2009     400245360W
  1051     4254     3/11/2009     3/19/2009     404824298A
  1051     2768     10/16/2009     10/17/2009     401987971A
  1051     53081     12/23/2009     12/27/2009     406889222A

  so now
  
  Now, I want to convert this 10 lines in a single column as:
  
  1051 2009717250200972090409949 10512009129452009121190409949 1051201072178201072503021811 1051 200982120097002009 83107381779... then on
  That is to say first 10 records will become a single column and so on...
  
  
  So for each 10 records, I do a column like above the results. and there are two spaces after 1051 (first medium and after the last column col_E column, there are 6 places, then second line will start.
  
  Can you please help me how we can do it.
  
  Thanks in advance!
  
  Thank you
  Nick
  
  Published by: user12020842 on April 21, 2011 12:23

  Try this,

  SELECT REPLACE ( MAX (SYS_CONNECT_BY_PATH ( str, '@#')), '@#')
    FROM (SELECT col_a || ' ' || col_b || col_c || col_D || col_e || '      ' str,
                 CEIL (ROWNUM / 10) lvl,
                 ROW_NUMBER () OVER (PARTITION BY CEIL (ROWNUM / 10) ORDER BY col_a) rn
            FROM Table_name)
  START WITH rn = 1
  CONNECT BY PRIOR rn + 1 = rn
         AND PRIOR lvl = lvl
  GROUP BY lvl
  

  G.

• Adobe Photoshop CS2: digitization of the clip and get an unwanted black line when recording in PNG

  l work in Photoshop pencil and pen drawing of mine sweeping in the computer to convert them to digital files. I save as a bitmap black and white clipart as Formate file extension .png.  My problem I noticed is when I go to import to tell Indesign which, on the right side of art, work is a continuous line. I can go back to Photoshop and the spectacle of clip art that there is nothing there. I tried to copy and past and save as a new file name and still appear when I import clip in another program. My question is what this causes some clipart that I work in and some that I do is not the solid black line? Can help me here I am puzzled why it appear after you save the file and import clip in anorther program. I'm trying to set up a book clip art for my older sister of all my scribbling because she was missing and so went back to my art book and paper than o doodled on and all scanned

  in and want to ensure own clipart and be displayed with this line on the side of them. Thank you for your time, I appreciate all the help I can get. Larry White

  Hello

  May I know what is the version of the Photoshop and in-design you use.

  Have you tried to save the file in another format and then tried the same thing.

  Thank you