Convert image format (from 1440 p, 1080 p)
Hi all
I use the trial of first CC (given to make the jump from FCPX). Guides to get started on the adobe site are great, but I'm having problems trying to find an answer to this question:
I shot some footage in 1440 p (by mistake), I edited into a sequence I want, color graded it and put music to it. How do I crop it so that it becomes 1080 p. I used the cropping effect, but when I go to export it to the h.264 format it always exports like 1440 p but with black bars.
Can anyone help? I would be eternally grateful
Chris
1440 has an aspect ratio of 1.33. This should also be in your sequence settings.
1440 can be easily exported to 1080 with aspect ratio of 1.0.
You can also drop 1440 images directly into a 1080 sequence, it will adapt automatically to the screen.
Tags: Premiere
Similar Questions
-
ACVHD 1440 x 1080 60i converted to SD is crushed?
Hi there will...
First of all, as I see many others, I'm new here HD edition, thanks a lot for all the help of those who have the knowledge!
Ok.. My problem,
I have a few fottage .mts recorded on my new Sony HDR-CX550v
I use CS4 master suite (first and still)
Remains with HP PC
The source is 1440 x 1080, 60i
I want to convert to serious SD and play on a regular DVD, again using
I went to Jeff Bellunes Tutoriels (who have been great, I learned a LOT) on the HD - SD conversion... BUT...
all his examples use HD 1920 x 1080 xx, so...
I shot some test footage at 1920 x 1080 60i and intervened although its procedure and it worked great... BUT...
(and that's the problem)
As noted above, the actual source footage, I NEED to convert was filmed in 1440 x 1080 60i (widescreen)
I used the same procedure as 1920x1080i Jeffs tutorial, but when I took the result, then out again
(nothing special yet... just did a simple a word-transformed into a button in the menu, linked the timeline button, related the end action of the calendar back to the menu, then returned to a folder and engraved on a DVD)
When played on the DVD SD the result low high Squashed crushed another drive... makes everything look small and bigger...
When I started the project in first, I adapted the source: X.V. 1440x1080i30 (60i anamorphic)
that, in the first are States in the preset description box:
For editing AVCHD Formats saved in 1920 x 1080 anamorphic (ex.1440x1080).
16:9 video HD interlaced at 29.97 frames per second.
audio at 48 kHz.
Timecode offset for numbering.--------------------------
General
Editing mode: AVCHD 1080i anamorphic
Time Base: 29.97 FPSVideo settings
Image size: 1 440: 1080v (1.3333)
Frame rate: 29.97 FPS
Pixel format: HD 1080 anamorphic (1.333)
Fields: Upper Field FirstAudio settings
Sample rate: 48000 samples/secondDefault sequence
Total of the video tracks: 3
Master the track type: stereo
Mono tracks: 0
Stereo tracks: 3
5.1 channels: 3
SUBMIX mono tracks: 0
SUBMIX stereo tracks: 0
5.1 submix tracks: 0I guess that's the correct preset for my images...
And then following the tutorial by Jeff for 1920x1080i
I'm in the media encoder,
Export media
Choose MPEG2-DVD Format
NTSC widescreen high quality as a preset
In the video tab: change the order of the fields to stem
Bitrate settings changed: Encoding Bitrate VBR 2 pass.
Change Min.Bitrate to 2.8, flow target flow and 7-8
make the selected maximum use,
left on zero multiplexer
and kept the default audio settings
then moved on to M2v and associated .wav file
Here's what I imported as assets in, made to a TS file and burned on a DVD
I also did a .wmv export by using the windows media format / NTSC widescreen to download high quality preset
for a file to load up on youtube... and it seems well... no crash and the quality is very good.
() http://www.youtube.com/watch?v=mK9n7zjXMS8 ( )
the settings in the tutorial do not work for 1440x1080i? Like I said before, when I used the images of test 1920x1080i, he played on the DVD SD player perfectly with GREAT quality...
Please any help would be greatly appreciated... hope I'm not on for more details...
I really need to get these images converted...
Thank you
CB
I'm in the media encoder,
Export media
Choose MPEG2-DVD Format
NTSC widescreen high quality as a preset
In the video tab: change the order of the fields to stem
Bitrate settings changed: Encoding Bitrate VBR 2 pass.
Change Min.Bitrate to 2.8, flow target flow and 7-8
What setting did you use for the format of pixels? Did you leave it by default?
What your DVD player? What you set as the display format (Normal, wide screen, stretching, etc.)? What type of TV? You have a big screen HDTV or a standard 4:3 CRT? The settings in the DVD player matches the type of TV?
Finally, when you import the M2V file in en, in interpreting it correctly, IOW, it appears correctly in the preview yet?
-Jeff
-
Hi, manage users
What is your opinion on the use of the graphics with PDF format when creating DITA content, as I'm not sure that a PDF is supported as the graphic format in DITA?
Reason for this is that I'm moving from using grapics with format (exported from cad) WMF to SVG, but I experienced some problems when you import graphics with SVG format in FrameMaker.
Sometimes it works, but not always, for example "the filter has encountered a problem and was able to complete the translation.
Also, I tried to check if the files are valid with the W3C online validator.
Best regards
Ronny
Hi Ronny,.
I'm not an expert of DITA, but given that no one has replied yet, I'll try to add a little something.
I don't think that DITA cares about image format, but could your tool for creating and editing platforms. For example, FrameMaker can make a PDF file that you create, but I do not know if another XML editor would be like oxygen. Then for the publication, some formats may make a PDF (as another PDF) format, but a web browser could not (for HTML). Perhaps cares DITA or maybe the OT Toolkit can automatically convert image formats, but I'm not aware that one of these are true. An expert of DITA weigh.
About importing SVG, I also had problems with the import filter. I don't know if there is no response to this. I think FrameMaker SVG support is not very good. I tend to use WMF files because they are much more reliable, but still they cannot be rendered in a browser for my HTML output. So, I actually maintain the WMF PNG versions and all my vector art. I automation to manage this (macros) in Visio, conversion extension file when editing HTML, etc., so the overhead is small enough for me. This may not be the case with you, if. Overall, I think the real question is the problematic SVG support, which I don't believe you can do anything.
Russ
-
Hello
I want to convert image format jpeg bmp .is there a way to convert jpeg to bmp.
Unfortunately no, the BMP format should be relatively simple, so make a writer shouldn't be hard. Just know that an EncodedImage returns an encoded image. a Bitmap returns the color of raw RGB/A information.
A good explanation of the BMP format is actually on Wikipedia: http://en.wikipedia.org/wiki/BMP_file_format
-
I tried to download a pdf and convert them into excel, but the data in excellent is always to the image format. How can I get the pdf data into the columns and rows so that I can do the calculations?
If you start the https://forums.adobe.com/welcome Forums Index
You will be able to select a forum for the specific Adobe products you use
Click on the symbol "arrow down" on the right (where it is said to see all our products and Services) to open the drop-down list and scroll
-
Need help to convert an Image Format in forms...
So Ive worked with Flash Pro CS5 and it seems that I can't get right with image formats conversion
in symbols of form. A few days ago I convert it correctly, but now I don't remember exactly how
I did it lol.
What Im trying to convert an image into a symbol of the form, and then in a format of .gls. When I import
the symbol of work in my SoThink Flash form it show up under the stage, but now I can't recreate
a work as it stands as an empty image.
Ive looked and read a few tutorials but Im confused on what order I should do the steps in
conversion of an image into a symbol.
ID appreciate the help if possible, thank you...
BTW... If theres an easy way to convert an image into a .gls shaped I'd like to hear it as well
When you import a bitmap into flash, it's a bitmap in flash. That is to say, no need for conversion.
If you then want to create a vector of your bitmap image, add it to the scene, click on it to select it, then click on change/bitmap/trace bitmap. Choose your settings, and then click ok. on stage, you will have a vector. You can then convert this vector a symbol (movieclip, button or graphic).
-
The callback API viewfinder camera image format
Hello
I try to set the frame type in the viewfinder_callback be RGB888 so that I can perform a basic treatment. However, in the code below, camera_set_photovf_property returns EINVAL for each outside NV12 format.
err = camera_set_photovf_property( handle, CAMERA_IMGPROP_FORMAT, CAMERA_FRAMETYPE_RGB888); if(err != CAMERA_EOK) { fprintf(stderr, "Unable to set property. Error: %d %d\n", err, EINVAL); }
The frame types are limited to NV12 or I do something wrong?
Thank you
Andy
You can search the available frame types from camera_get_photovf_frame_types() and other similar functions:
NV12 is the only format supported for the viewfinder of the photo currently however. If you need RGB, you need to convert the image format yourself or use the video viewfinder. If you need be able to capture good photos, you will need to stick with the vf photo.
What type of treatment do you need to do?
-
In the first CC made a project with 1440 x 1080 results images in a video "hurry" on the sides. Change the siza of pixels "hurry" even more. THEN, by clicking on the button Source of Match have solved the problem, but since the images with the superior was initially video rendering is also superior first, but I want to do it's progressive, and as soon as I chose progressive I get "hurry" videos made once again. How can I get a life normal 16:9 result of rendering AND make progressive at the same time?
You have two options:
- CHANGE in the sequence of 1440 x 1080 to match sequences, and when you export option 1080 29.97 p (1920 x 1080) chose and he gets then deinterlace
- CHANGE in 1920x1080i sequence, and again, deinterlacing happens when exporting to the 1080 p format
If you want to edit in 1920 x 1080, not even mess with the creation of a custom sequence setting. Simply choose "AVCHD > 1080i > 1080i30 (60i) AVCHD. Note that I didn't use a sequence of 1080 p - this is probably why you see the lines. Change 1080i as 1080i (if 1440 x 1080 or 1920 x 1080), do not fall in sequence 1080 p 1080i clips!
I've been editing HDV for many years and no problem suite above workflows. Edit 1080i and 1080 p for export and it looks great. Never export in 1440 x 1080. Follow these steps and you will have no problems with lines or proportions.
Thank you
Jeff Pulera
Safe Harbor computers
-
Best image format for InDesign CC
I wonder what is the best image format to use when you place images in InDesign CC - I have followed the Simple Train video tutorials (which I think are excellent) and note that the images in their layouts are JPEG files. I'm old-school design for print graphic designer, so I always thought TIFF would be better, can also place RAW images?
Thanks for any help
EPS does not support transparency or color management. The effects are raster images in many cases. To ensure high quality use HAVE or PDF/X-4.
I forgot to mention another matter:
- If you place a layout in a different layout, place an INDD or PDF/X-4 file. (Always ask for PDF/X-4 If you want to use in InDesign.)
- If you have pictures, place them as RGB PSD files.
http://InDesignSecrets.com/import-RGB-images-InDesign-convert-CMYK-export.php - If the images have no transparency, you can use JPG with quality.
- If the images contain the text alive and/or vectors using PDF or PDP.
- If you place work, use the files HAVE or PDF/X-4. Avoid PSE, run away from him.
-
Dell V305 scanner will not convert image to PDF without OCR
Hello
I have a Dell V305 scanner, and I would like to convert images to PDF without running the OCR software. Is this possible? When I try to convert an image to PDF, it gives me an error "OCR program missing. My CD drive is broken so I can't install the OCR from the CD software. I looked for a download from Dell, but could not find one. Can you suggest a solution? Thank you very much
. - Sheila
Hello
I never tried to convert images into PDF without OCR. But I've only tried to convert PDFS into images using some PDF conversion tools. I wonder if there is some pluins can thus help with that? You can google it and give it a try. I wish you success. Good luck.
Best regards
Arron
-
Storm: supported image formats
What is the full list of image format supports the blackberry storm? .PNG, .jpeg, .gif? What else?
I couldn't find it in the device specification.
The following formats are supported:
- BMP
- jpg
- gif
- PNG
- TIF
Information from here
-
Hi all
Here are my existing query which I run another tool to extract data from oracle-
Select * from transactionTbl
WHERE
DATE > = TO_DATE (' $(vAppStartDate)', "DD/MM/YYYY")
AND DATE < = TO_DATE (' $(vAppEndDate)', "DD/MM/YYYY")
variables-
-vAppStartDate = 06/01/2014
-vAppEndDate = 30/06/2015
Rather than use the Date column in the WHERE condition, I want to use PeriodID of column existing in the same table, to make the query faster.
The period column is in below format.
PeriodID format-> 201294 //means 2012Q 4. So 9 means Q
Since I'm on variables, the values are always to the date format, so my requirement is first change variable date from periods of format.
I wrote the pseudo-code, because I of course know how to convert date format periodID. Q also means in the periodID 9.
Select * from transactionTbl
WHERE
PeriodID > = period_function (TO_DATE (July 1, 14 ',' DD/MM/YYYY '), 'YYYYxx')
AND PeriodID > = period_function (TO_DATE (July 1, 15 ',' DD/MM/YYYY '), 'YYYYxx')
Please help me with the query.
Thank you!
Calling a user-defined function is likely to slow down your query.
What's the problem with just using regular date formatting strings for example
SQL > select to_char (to_date('15/09/2014','DD/MM/YYYY'), 'YYYY "9" Q') of double;
TO_CHA
------
2014931 selected line.
-
ADF component af:image supports image formats
I use Jdev 11.1.1.6
< af:image > component, what image formats are supported? jpg, gif, png, bmp, etc. ?
It should be document somewhere. But I could not find
Thank you
Hello
Yes, you should check the extension on the valuechange of your input like this file: -.
String extension = upload.getFilename(); if (extension.lastIndexOf(".") > 0) { extension = extension.substring(upload.getFilename().lastIndexOf(".") +1).trim(); if (!extension.equalsIgnoreCase("PDF") or check from the list or properties file) { inputfilecontrol.resetValue(); AdfFacesContext.getCurrentInstance().addPartialTarget(inputfilecontrol); jsfUtils.addFacesErrorMessage(jsfUtils.getValFrmRsrcBndleConnections("ERROR_MESSAGE_UPLOAD_FILE")); return null; } else { //do something } }
I hope that helps!
Kind regards
Shah
-
Cannot print all forms even in image format
I can't print any pdf forms even at as suggested image format. Also I can't convert all the files that I pay for
Hi cherrih68308691,
Try the following: open Adobe Reader | Change | Preferences
- under Documents, change "Show the documents in PDF/A mode" Never
- under the (enhanced) protection, clear protected at Startup Mode
Click OK t confirm the changes.
Relaunch the software Adobe Reader & now, try to print.
I would like to know if it works.
Kind regards
Nicos -
convert images in virtual copies in a collection
When you create collections in LR5 + you create a pointer to the master file. If you make changes to the images in a collection you change the master. To avoid this you can convert images in a collection to a virtual copies that will be virtual copy
I don't know if it was a question? In case, it was...
You can not turn directly copy (convert) an image inside a Collection, in a virtual. A master or a virtual copy (or both) can be added to a collection. There is a 'switch' master status command and copy a version of the given image - but if you have done such an image inside of a Collection version, you also would do the same for the image version outside of the Collection, as well.
If master images have been added to a Collection, it is possible to make virtual copies of those - then that, if this is done by working 'inside' collection, will result in membership (a little) this special collection, can be inherited by the new virtual copies. Images of masters could then be removed from the collection, leaving only copies. These copies would of course also be considered, alongside their masters, when the relevant image file was seen.
As part of creating a new Collection, there is an option to add the images highlighted. Beneath this, is an option for this have to happen in the form of new virtual copies - rather than add the masters of these images to the Collection. Was it that you were talking to the OP?
Maybe you are looking for
-
Bookmarks toolbar - icons of site were published in FF4 - how to remove icons?
I can find the option to turn off all the toolbar icons, BUT specifically Web site icons appeared in V4 in the bookmarks toolbar. It's annoying as the icons take up much space - I can fit only half as Favorites toolbar. How can I turn off the icons o
-
accidents of iBooks on ios 9.3
I have a large collections in iBooks on my iPad 3. It has always worked well - until I updated to ios 9.3. Now iBooks opens oand usually crashes whenever I comand to access my pdf files. If I go into Apps and open iBooks via Apps, it tries to load th
-
I just received a Scanjet 4200C scanner as my all in one is down. I'm trying to analyze things I want to save them on the computer, but it will only bring up the printer as a choice. Is there a way or software I can download to change that. I run XP
-
Why when I send e-mail, do they not reach computers recipiants?
For tha past 2 weeks, I sent many e-mails to my friend, but they do not receive them. They all appear in my sent items list. I am still receving all my e-mail address.
-
I'm having the same exact problem with the point radial program does not let me install mcAfee which can do?