Convert String to Decimal for Zigbee on noncommunicable diseases

Similar Questions

• Readed hexadecimal string converted to a decimal number.

  Hello! I do a vi to check the hours of the lamp of my Sony projector. I send a hexadecimal command which is: A901 dignitaries 1301 0000 139 a senators. When the projector receives answer with 1901 1302 0031 339. 0031 corresponds to the data that I need to convert it to decimal because it tells me how many hours we used the lamp. How can I get this read-separated string to get only the third part of hexadecimal numbers converted to decimal? Thanks in advance!

  Hey rounded!

  As the data is in a format string, the hexadecimal number VI string should work well in this case.

  To enter only a single figure of this string to use in the hexadecimal number string VI, then I suggest using the string subset VI; Returns a specified segment of a string. By changing the offset of entry which determines which part of the string data is beginning to be analyzed from and changing the length to control the amount of characters to analyze, you will be able to enter the character that you want to convert.

  Kind regards

• Number of strings with decimal

  Hello community,

  I would like to convert numbers to the string with decimal separators. So if the number is 52351 then the string I need is 52 351

  Another example 18653284.9653235 becomes 18,653,284.9653235

  What would be the best way to do it?

  Thank you!

  Read this thread: https://forums.ni.com/t5/LabVIEW/comma-separator-for-large-numbers-how-to/m-p/2123090/highlight/true...

  Not the first person to wish for this idea.

• string of decimal float

  Hello

  I am an intern and I have a problem with my system.

  I send information between a PCB to my computer. I send in my frame, a float to a string format and I would like to do the conversion in LabView to show the correct value.

  For example, there is something like that in my buffer: 3E94C2DC and I would like to convert that to decimal format.

  Could you help me please.

  Thanks in advance.

  Quentin

  Not clear to me:

  Source: "3E94C2DC" in what format? 2 words in Hex, or 8 bytes of ASCII-coded series?

  Output format: single float? (0,290549)

  

• Convert hexadecimal into decimal and keep the zeros on the left...

  Hello

  I hope you can help us?

  How to convert hex to Decimal and keep the zeros

  I read 002C, hex, and I want to convert it to decimal-0044.

  sscanf (MyNum, % '4 x', & DecNum); will only give me 44.

  It worked until I started having zeros.

  We will always have a 4 digit hexadecimal entry in a range

  We have the 00 leader in this case.

  How is this best?

  Thanks for the help

  Simon

  Hello

  I don't really understand your problem. Is this kind of things that you need?

  int main (int argc, char *argv[])
  {
      const char MyNum[] = "002C";
      int DecNum;
  
      sscanf (MyNum, "%4x", &DecNum);
      printf ("%04d", DecNum);
      getchar ();
  
      return 0;
  }
  

  '0044' appears on standard output when executing the printf function...

• convert string to float

  Hello

  I would like to convert string to float. I have a text which float to string contents of the file number.

  for example:

  10,000 2 of. 1.32323 0000 these channels I would like to convert float or double number.

  Help, please!

  I use the string of spreadsheet in table vi and I need to properly adjust the format string.

  %.; %f

  Thank you all!

• Convert String performed far and format her

  Hello

  I am new to Adobe and javascript. I have a string value that stores the Date of birth in yyyy-mm-dd format, as a string. I need to convert this Date and then place it on a PDF field in the format mm/dd/yyyy.

  Can anyone help?

  Thank you

  You can convert a string representing a date in a date object using the util.scand JavaScript method and and then format a date to a string object by using the util.printd method. For more information, see:

  http://livedocs.Adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.1254.html

  http://livedocs.Adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.1251.html

  In your case, the code would be something like:

  sDate var = '2013-01-10;

  Convert string to date

  Kai var = util.scand ("yyyy-mm-dd", sDate);

  Convert date to a new string

  var sDate2 = util.printd ("mm/dd/yyyy", anyway);

  Set a field value

  getField("date2").value = sDate2;

  The exact code you use depends on where you place the script and where you get the original date string, but this should help you get started.

• How to convert string to number in TS?

  Hello

  Anyone know how to convert string to number in TS?

  I couldn't find the Num() function.

  Thank you

  Val()

• How can I convert brochure MS Publisher for a Brochure in PDF?

  I use Publisher to do small brochures and would like to be able to put them on the Web in PDF and Brochure page. I have Adobe reader, and only allows me to convert Publisher ordinary A4 format in pdf format.

  Does anyone know if there is an Adobe product that can convert my Publisher brochure for a brochure in PDF?

  Player cannot convert a file to pdf format. It can only display the pdf that are already created. You are probably using the PDF generator editor. You can check with the help of the editor or you could alternatively buy the full version of Adobe Acrobat (use of the test for 30 days initially) or try Adobe PDFPack services for one month (there is no trial) to see if they do what you want.

• How to convert a site MUSE for use on a smart phone?

  How to convert a site MUSE for use on a smart phone? Is it possible to automate this? I have to reduce all image sizes?

  In the current version of Muse, you have to look at the top bar in the Plan view and click on the button of phone . It offers you the ability to copy the plan of the pages (if you think it's useful for your mobile website), but not the content. Yes, you must manually copy and paste what you want to be present on mobile pages.

  With the upcoming version, you also get a different approach, next to it.

  Take a look: https://Max.Adobe.com/sessions/Max-online/#/video/4923

• Adding new SCSI controller: "error string: invalid operation for the '0' device.»

  Hello

  I have a problem when I try to add a SCSI controller to a virtual machine.

  I have this error:

  Error string: invalid operation for the device '0'.

  Lack of details: InvalidDeviceOperation

  Here is my code:

  my $info = Description-> new (label = > summary of "" SCSI controller 2 ' = > 'LSI Logic parallel' ");

  my $controller = VirtualLsiLogicController-> new)

  deviceInfo = > $info,

  scsiCtlrUnitNumber = > '7'.

  sharedBus = > VirtualSCSISharing-> new ('noSharing'),

  busNumber = >-1,

  key = >-1,

  backup = > $backing_info,

  controllerKey = > 100,

  );

  My $devspec = VirtualDeviceConfigSpec-> new (operation = > VirtualDeviceConfigSpecOperation-> new ('add'),)

  device = > $controller,

  fileOperation = > VirtualDeviceConfigSpecFileOperation-> new ('create').

  );

  My $vmspec = VirtualMachineConfigSpec-> new (deviceChange = > [$devspec]);

  {eval

  $vm_view-> ReconfigVM (spec = > $vmspec);

  Util::trace (0, "Controller has been created. \n") ;

  };

  I don't know how to handle, or even how to solve problems.

  Any ideas would be greatly appreciated.

  Kind regards

  Jeremy

  I finally found a solution.

  It seems that it fails if you give a marked as mandatory parameter (scsiCtlrUnitNumber, hotAddRemove)... Theses parameters seem to be set automatically, a dump of the device which will show.

  Here's the code used:

  My = $controller_spec

  VirtualDeviceConfigSpec-> new (device-online VirtualLsiLogicController-> new (key-online 0

  device-online [0],

  busNumber => $scsi_controller.

  sharedBus => VirtualSCSISharing-> new ('noSharing')),

  operation => VirtualDeviceConfigSpecOperation-> new ('Add'));

  My $vmspec = VirtualMachineConfigSpec-> new (deviceChange-online [$controller_spec]);

  {eval

  $vm_view-> ReconfigVM (spec-online $vmspec);

  };

• How to convert string input streams

  Can someone tell me how to convert string input streams...

  There are multiple ways. I will list down few of them.

  With the help of the old solution and standard java.
  

  publicstaticString fromStream(InputStream in)throwsIOException {    BufferedReader reader =newBufferedReader(newInputStreamReader(in));    StringBuilder out =newStringBuilder();    String line;    while((line = reader.readLine()) !=null) {        out.append(line);    }    returnout.toString(); } returnsb.toString();

  If you use Google-Collections/guava-

  InputStream stream = ... String content = CharStreams.toString(newInputStreamReader(stream, Charsets.UTF_8)); Closeables.closeQuietly(stream);

  If you use the common Apache library... then it is worthwhile.

  StringWriter writer =newStringWriter(); IOUtils.copy(inputStream, writer, encoding); String theString = writer.toString();

  Quick way but only work during deserialization.

  String result = (String)newObjectInputStream( inputStream ).readObject();

  Note: ObjectInputStream is on deserialization and the flow of data must respect the Protocol of serialization to work, which may not always true in all cases.

  Ultimately, the most effective solution and only in two lines using java class Scanner.

  Tricky is to remember the \A regex that matches the beginning of the entry. It actually indicates Scanner to mark all of the flow, from start to beginning next (illogical).

  publicstaticString convertToString(InputStream in) {    java.util.Scanner s =newjava.util.Scanner(in).useDelimiter("\\A");             returns.hasNext() ? s.next() :""; }

  Read more: http://www.techartifact.com/blogs/2013/11/how-to-readconvert-an-inputstream-to-a-string.html#ixzz2lvy5muix

• Converting Images to CMYK for Print Publication

  When in my workflow should I be converting images to CMYK for print publication?

  Currently, I shoot FIRST pictures with my SLR in Adobe RGB, import images into Photoshop for manipulating and then convert the final image, the size to CMYK before placing it in my Indesign document. Before you go to print, I convert my PDF files using the [PDF / X - 1a: 2001] preset. I use a system that is balanced with a profile for my monitor.

  As many of my photos have shades of green, I am often disappointed by the conversion to CMYK because lose I the saturation and brightness. I'm doing something wrong? Is there a better way to preserve the quality of the color in my images when you go to a printer?

  Never. Leave it as RGB.

  All modern printers should happily accept RGB images. PDF/X-4 is the modern

  standard. X-1a can be described as archaic.

• Literal string too long for the CLOB

  Hello
  My version of the database is:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE 11.2.0.1.0 Production
  AMT for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  When I run this piece of code, I get an error.
  DECLARE
  insCtx DBMS_XMLStore.ctxType;
  lines NUMBER;
  xmlDoc CLOB: = 'xml string is about 4600 long lines in TOAD...';
  BEGIN
  insCtx: = DBMS_XMLStore.newContext ("xmlTempTbl"); -get the context
  lines: = DBMS_XMLStore.insertXML (insCtx, xmlDoc); -Insert the doc
  DBMS_XMLStore.closeContext (insCtx); -close the handle
  END;
  
  ERROR:
  ORA-06550: line 4, column 19:
  PLS-00172: string literal too long
  
  From my understanding a CLOB leave maximum string size of 2 GB. And on top, my xml string is not greater than 2 GB (I cannot display the xml data string, refers to the business). So why I get the error too long string literal.
  For the above, I fault the XML into several parts and run the PLSQL, then it gives no error.
  Please advice.
  
  Published by: 934451 on November 8, 2012 07:06
  
  Published by: 934451 on November 8, 2012 07:07

  From my understanding a CLOB leave maximum string size of 2 GB.

  Not exactly:
  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e25519/datatypes.htm#CHDDCGEE

  but this isn't the real problem.

  The error is about the "string literal" size, there is a limitation too:
  http://docs.Oracle.com/CD/E11882_01/server.112/e17766/pcmus.htm#sthref18132

  PLS-00172: string literal too long
      Cause: The string literal was longer than 32767 bytes.
      Action: Use a string literal of at most 32767 bytes.
  

  For the above, I fault the XML into several parts and run the PLSQL, then it gives no error.

  Is this a real case of production or you just test?
  In practice, we should first save the file in a variable/column CLOB (or XMLType) and then reference the content from there.

• How to convert trial items 10 for a purchased DVD?

  How to convert trial items 10 for a purchased DVD?  I can not find anywhere to enter the serial numbers.  He used to bring up all the time, but now when I have the serial numbers, I don't find it anywhere.

  I found where to enter serial numbers: I had to go to the Publisher;  entry screen does not appear on the Home Page or from the Organizer.