Convert the Clone related standalone VM

Similar Questions

• The Clones related, configure different subnets?

  The Clones related, configure different subnets?

  I have a great environment and a lot of different software packages, with combinations of different software.

  It is therefore important to contain the number of MODELS to a minimum.

  I need a way to modify the models 'virtual material', to change the tag VLAN (subnet) when you set up a new POOL.

  When you use a TEMPLATE in 'normal' VMware, you can change the virtual material, to be able to put the new virtual machine in a different subnet.

  Is there a way to do (modify virtual hardware) by script, or...?

  HTC

  Whenever you change the network on the main image, you will need to take an another wink.

  The likely scenario is so several shots with different networks as you deploy your pools.

• The Clones related with 2 cards Ip address irregularities - network

  
  Hello world

  I have a headache to 5.2 view that I need help.

  I build linked clones, virtual machines need to have 2 network cards, 1 on the web and one for residents. I use a customization profile Windows based in vcenter. They go on the field and I set the network to custom settings and then put 2 NICs in DHCP. When I put in service 1 clone it worked, it was on the field, web access and internal ping etc etc. However, I have configured and then another, and I can not connect via RDP and PCoIP. Black screen times out after 10-20 seconds. If I understand correctly this is normally a network problem (normally only about PCOIP rather than RDP, I thought)?

  In any case, I put in service further and it seems (not to the letter) any other the world doesn't want to connect.

  When we look at in connection and vcenter, the only difference I see between the 2 types of vm that tab summary in vcenter, ones that work see the IP address of the card web access and those who do not work, shows the internal IP address. When you click Show all, ips are listed. It's confusing to me!

  When I reset the virtual machine (in vcenter) that allows me to log on to the console and it seems well, once I try to connect to pcoip it fails with the black screen and then I is even more ctrl alt del in the console of the vi client. It does not show that it has received a user either.

  Curiously, I rebooted one that did not work about 4 times and it seemed suddenly to the nic address and I can now connect with pcoip.

  Finally, addressing our network guys, he says that the PCoIP ports are open on the internal network, I can confirm this because it everything works fine in full mode with 1 NIC on the inside.

  Any help would be massively appreciated. Let me know if you need more information.

  Concerning

  David

  The agent will attempt to retrieve an IP address and report it to the connection to the server. Depending on how Windows presents the order of the list, he may decide to use the bad. For multiple network cards, you should follow the link below to configure the subnet mask and to ensure the right, it is always selected: Configure a Virtual Machine with multiple network cards to see Agent

  Mike

• Clones related with thinapp application not installed

  I have a pool configuration of clone bound to an entire division and I have several thinapps, but in this pool we will say that I have two computer scientists who need Windows 7 RSAT tools installed, which I did not have much luck thinapp'ing. This isn't "the importance app, the problem is that when you want to update your master windows and sauté a recomposition, all thinapps of course, but everything you have installed manually disappeared."

  I'm trying to use the clones related for obvious reasons of storage, but I'm starting to think unless you can thinapp related applications that will be installed on these machines there is no way that you can use clones... am I missing something here? Of course, I don't want to reinstall RSAT after every recompose. Or even worse if there is another application that has been installed on 50 machines, circulating to everyone after a recompose to reinstall would be very laborious.

  I would like to make this user a pool specialist.

• Wait for the operator on the Clones Script related.

  I have a script to create linked clones (credit goes to the members of this forum to help me to do things), but I have problems with customizing the script tries to apply the customization until the clone is complete and I get the following:

  Script:

  to connect-viserver 'vCenter.

  
  

  $strtemplate = Read-Host "Please provide a model to create Clones related to:

  $strVMName = Read-Host "Please provide a Naming Convention, (Ex: CTX #).

  $strStart = Read-Host "Please provide a Naming Convention number from (EX: 1 = CTX1)"»

  $strEnd = Read-Host "Please provide a Convention assignment of names ending number (EX: 3, will create CTX1, CTX2, CTX3)".

  
  

  $intStart = [System.Convert]: ToInt32 ($strStart)

  $intEnd = [System.Convert]: ToInt32 ($strEnd) + 1

  
  

  for ($i = $intStart; $i - lt $intEnd; $i ++) {}

  $sourceVM = get - VM $strtemplate | Get-View

  $cloneName = "$strVMNAME$ I".

  $cloneFolder = $sourceVM.parent

  $cloneSpec = new-object Vmware.Vim.VirtualMachineCloneSpec

  $cloneSpec.Snapshot = $sourceVM.Snapshot.CurrentSnapshot

  $cloneSpec.Location = new-object Vmware.Vim.VirtualMachineRelocateSpec

  $cloneSpec.Location.DiskMoveType = [Vmware.Vim.VirtualMachineRelocateDiskMoveOptions]: createNewChildDiskBacking

  $sourceVM.CloneVM_Task ($cloneFolder, $cloneName, $cloneSpec)

  Sleep 10

  Set-VM "$strVMNAME$ I"-OSCustomizationSpec "" CTX-customization-confirm: $false

  Start-VM "$strVMNAME$ I '-RunAsync-confirm: $false

  }

  The error:

  Set-VM: 25/01/2012 17:13:24 Set - VM, the object has already been dele

  Ted, or not completely created

  To C:\Users\lpalacio\Documents\Scripts\VMware PowerCLI\Create-link - Ask.ps1:21

  character: 12

  + Set - VM < < < < ' $strVMNAME$ I "-OSCustomizationSpec" "CTX-customization - co

  nfirm: $false

  + CategoryInfo: NotSpecified: (:)) [game - VM], VimException)

  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomatio

  n.ViCore.Cmdlets.Commands.SetVM

  Is there a way to tell the script to wait until the clone is finished? I know I can use a sleep command but not all clones will take as much time to complete.
  Thank you.

  You can try to wait here it is finished

  ...

  $taskMoRef = $sourceVM.CloneVM_Task ($cloneFolder, $cloneName, $cloneSpec)

  $task = get-views $taskMoRef

  While ("running", "pending" - contains $task.Info.State) {}

  $task. UpdateViewData ("Info")

  sleep 5

  }

  ....

• How to increase the size of the c: drive in image master clone related?

  I have a pool of clone related with an image master.  drive c: must be increased because of all of the updates on the master VM.  But when I turned off the master VM, it is grayed out and cannot be changed.  I have a number of clichés associated with the master image as well.  I read that I have to remove or delete all the snapshots before I can increase the size, but then does that mean that I lose all my changes since the first base image?

  Thanks the community for comment.

  Removal of the snapshots in snapshot Manager means in fact that you're merging deltas in the snapshots in the basic disk, i.e. preserve the current state. Assuming that it is a floating pool and only the latest snapshot is used for clones, it should work to remove snapshots, resize the disk/partition and recompose the pools of a newly created snapshot when you completed the master update.

  André

• What about clones related if I delete the VM related to?

  I need to free up some space in my data store (there is only 135 GB for this proof of concept). I need to remove the base and keep the clones or shrink the base. I'm not sure that it is still possible because the setting is gray out.

  Thank you.

  The clones are related to the replica, so if you remove the replica, they will no longer work.   Is there a way you can reduce the number of clones or possibly balance on another data store?

• Impossible to get hardware information for the selected computer - Standalone Converter 5.5.3

  Hello everyone!

  I wanted to reduce my DC scores (of 2 used only TB ~ 150 GB) with the help of the stand-alone converter, but when I select 'source machine' (my off DC), then click on next, I get the error "Unable to get material information for selected machine" (which runs the converter as admin doesn't help). Also i ' v tried to convert other machines on this host and succeed.

  Cannot understand what is wrong with my DC.

  ESXi 5.1.0

  Converter 5.5.3

  Newspapers of my 3 attempts as an attachment.

  Seems that the problem is the size of the disk, possibly existing snapshots. Try to convert the virtual machine as a machine (on) physical.

  HTH

• Moving thin model w / Clones related

  We have 6 thin gold models put in service and have filled the data store that they are on. Long story how it happened. The process that is used is a user of Clones in the workspace using a linked clone and then deploys the machine from there.

  I need to spread thin between other data warehouses provisioned templates so that it does not happen in the future but I understand that if I use the action to consolidate to move one of these models, it will affect all the related clones. Is this correct?

  If so is there another way to move a thin model to a new data store and do not break the linked clones?

  The only other option is to make a copy\clone of the model and moving it, but the problem with that is that it converts the Thin Thick model as we use LM 4.0.2. So if I cloned the model and it converted to thickness is there a way to get Thin again?

  
  Then I could take these new thin models and spread them out and those that can be used as the 'old' is not deployed.

  Thanks for reading so far and suggestions.

  Option 1: Move an existing model and all the virtual machines:

  SSMove moving (cut and paste) a clone tied together tree between data warehouses.  However, I would like to you to be on Lab Manager 4.0.4 (final version), as it has a few minor improvements to the tool.

  You must also cancel the deployment of all the virtual machines that are related to this.

  Option 2: move the template only via a full consolidation.

  This movement of the model only.  The model gets consolidated to the new data store.  The new virtual machines configured from the model will go to the new data store where the vmdk.

  The previous VMs will always exist and work.  As they are removed, the space will be released on the previous drive.  If all the vmdk related to the orignial tree is removed, then the entire tree will be cleaned.

• Closure of the Clones of models

  I use a Template and VI server to create several "clones" that allows me to perform several tasks in parallel.  The Clones are written as a stand-alone VI, with a stop button on the control panel until I push by program to stop the Clone.  If I create, for example, three clones, I'll get three before Clone 1 Clone 2 panels and 3 clone.

  When I go to close the project, I wonder if I want to save the created Clones.  The answer, of course, is always 'no '.  Is there a way to 'close' programmatically these Clones without saving them so I asked this question?  I'm happy to have the front panels are not visible - indeed, my routine to start the Clone has an option "Hide the front panel" and my routine to stop the Clone has an option "Close cover" - If either is set, the Clone of the front panel are not visible when the program terminates.  However, even in this case, the fence project asks me to save all the Clones.

  Another issue that could be related to "Unregistered Clones" - when the program and the Clones are stopped and I try to fill in the project, I get a message saying "the proposed closure will stop some current screws execution".  However, to the best of my knowledge, there is no screws running is there something that I am missing?  'Do something' to the farm/stop all that generated this message?

  I guess that there are the "arguments" (or maybe even 'evidence') on the best way to spawn asynchronous clones - using a model of VI (like me) and start to help run a VI, making the reentrant VI and it start by running a VI or using the asynchronous call start.  I don't know the relative merits of these different methods, but conceptually (think in terms of 'prove accuracy', explaining to others, maintenance, etc.), model VI method seems not 'wrong' to me.  In any case, it's the premise of my question.

  I have all the clones close to "" asking them to stop.  I have two chances to close their facades - I can choose to run them without having to open the front panel, or can choose to close the front before stopping them.  If I make one (or both) of these, I received both a message saying, I couldn't close the project without stopping a VI running (but there was no 'obviously' running VI) and asking me to save all the clones.

  The correct answer to my question was to be sure that the references used to open and close the clones has been closed, something that I had forgotten to do (I discovered and corrected this omission today).  It seems the answer to my question.

• Version of VI is still too early to convert the last version of LabView

  I get this error when deploying a simple loop VI I try to troubleshoot the symptom of not being able to connect to the remote control.

  I have LabView 2014 SP1 version 14.0.1 installed and that's what I used to build the VI (see attachment).  The version of the software on the cDAQ 9139 I work with ranges from 14.0.1 for real-time 14.2.0 for DAQmx 14.5.0 or Web Application Server.  (See attachment).

  How can we still too early to convert to the current version, if the software LabView 2014 is installed on the cDAQ has VI created in LabView 2014?

  Again, the symptom that I see is "Server does not support remote façade panels" when you try to access the façade of a web browser.   I confirmed by working with our it Department IS not blocking all communication.  The Blue Coat standard software is not installed on the computer, I'm trying to access the Panel of (I also tried to connect to the remote control of my computer at home that has no software IS on it with the same results).  Anything related to the NC was added as exceptions to the firewall.  I have tried a large number of configurations of ports and worked through the troubleshooting list, you can find on NI.com when you search for this error.  There must be something tiny miss me.

  In addition, nobody knows what the two links in the HTML file that is generated when you use the Web publishing tool are supposed to do?  One is a FTP link and the other is a link to the plugins page.

  I took two step forward on this issue.  First of all, I reformatted the hard drive of the cDAQ and reinstalled only most of the software as before, I had been all install available on the host the cDAQ.  This seems to have fixed the error 'version of VI is too early to convert the last version of LabView.  Secondly, I discovered an error in my understanding of the port settings.

  In the configuration of the cDAQ web screen, the web application server is listed as port 8080, by default I believe.

  In the properties cDAQ in the Project Explorer window, the web server has been changed on port 80 to eliminate the need to put in the port number to access the remote control.

  I'm sure it's an assumption on my part, and oblivion, but I thought that those who have the same parameter with just the ability to be set from two different places.

  When I try to access the remote control via the web browser uses the web application server port listed in the views of web configuration, I received the error "server does not support the remote panels.  When I try to access the remote control via the web browser using the port listed in the properties of the CDAQ project for remote control Server Explorer, I could see and interact with the remote control.

  This probably also makes perfect sense now that I understand they serve two different goals, but if you define two ports at the same address, you will get the error "server does not support the remote panels.  Interesting that it always provides the correct html page.

  I am sure it was my problem throughout linked to the issue of the remote control.  I was probably just lucky when I put the Panel remote port server during the initial setup and my luck ran out when I upgraded to LabView 2014.

  Hope this helps people who may have the same assumptions I made.

• AIR-SAP1602I can convert the regulator AP-based?

  Hello

  AIR-SAP1602I is a Standalone AP (Fat - AP), can become AP(Thin-AP) the controller-based via install other IOS?

  On the other hand, we can convert AIR-CAP1602I to be an autonomous access point?

  Thank you for your attention and your response!

  You can convert SAP to with controllers?  Yes.  It is as simple as copy of IOS "RRS" point of access and let the AP begin with him.  As simple as that.

  Can you convert the AP since IOS on SAP controller?  Yes, it's as easy as thereafter: using a server TFTP to return to a previous version

• Convert the VPN Site-to-Site of PIX to ASA 8.2

  I worked on the conversion of a config above a PIX an ASA 8.2 but I am running into trouble with the site to site vpn. The PIX has a VPN client and site to site. Given that some of the configs for the cross from site to site on the VPN client I'm confuse. Any help would be apperciated.

  Below are excerpts from just the PIX VPN related orders.

  permit access ip 192.168.0.0 list Remote_splitTunnelAcl 255.255.0.0 any

  inside_outbound_nat0_acl ip access list allow any 192.168.0.160 255.255.255.240

  inside_outbound_nat0_acl Zenoss_OS CNP 255.255.255.0 ip host allowed access list

  inside_outbound_nat0_acl SilverBack NOC 255.255.255.0 ip host allowed access list

  inside_outbound_nat0_acl allowed host NOC 255.255.255.0 enoss_Hardware ip access-list

  outside_cryptomap_dyn_20 ip access list allow any 192.168.0.160 255.255.255.240

  outside_cryptomap_20 Zenoss_OS CNP 255.255.255.0 ip host allowed access list

  outside_cryptomap_20 SilverBack NOC 255.255.255.0 ip host allowed access list

  outside_cryptomap_20 Zenoss_Hardware CNP 255.255.255.0 ip host allowed access list

  IP pool local DHCP_Pool 192.168.0.161 - 192.168.0.174

  NAT (inside) 0-list of access inside_outbound_nat0_acl

  Sysopt connection permit VPN

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Dynamic crypto map outside_dyn_map 20 match address outside_cryptomap_dyn_20

  Crypto-map dynamic outside_dyn_map 20 the transform-set ESP-DES-MD5 value

  outside_map 20 ipsec-isakmp crypto map

  card crypto outside_map 20 match address outside_cryptomap_20

  card crypto outside_map 20 peers set 205.x.29.41

  outside_map crypto 20 card value transform-set ESP-DES-SHA

  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

  client authentication card crypto outside_map LOCAL

  outside_map interface card crypto outside

  ISAKMP allows outside

  ISAKMP key address 205.x.29.41 netmask 255.255.255.255 No.-xauth-config-mode no.

  ISAKMP nat-traversal 180

  part of pre authentication ISAKMP policy 20

  encryption of ISAKMP policy 20

  ISAKMP policy 20 md5 hash

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 86400

  part of pre authentication ISAKMP policy 40

  encryption of ISAKMP policy 40

  ISAKMP policy 40 sha hash

  40 2 ISAKMP policy group

  ISAKMP duration strategy of life 40 86400

  vpngroup address pool DHCP_Pool GHA_Remote

  vpngroup dns 192.168.0.11 server GHA_Remote

  vpngroup wins 192.168.0.11 GHA_Remote-Server

  vpngroup GHA_Remote by default-field x.org

  vpngroup split tunnel Remote_splitTunnelAcl GHA_Remote

  vpngroup idle 1800 GHA_Remote-time

  vpngroup password KEY GHA_Remote

  I guess what I really wonder is if someone can convert the version of site to site of this VPN ASA 8.2 config so I can compare it to what I have. I need to have this, so I can just fall into place and work.

  Also, it does appear that political isakmp 40 are used, correct?

  On your ASA in Setup mode, simply type vpnsetup steps for remote access ipsec or vpnsetup site - not and it lists what it takes or you can download the PIX of the ASA migration tool.

• How to convert the non - CBD CBD

  Hello

  I recently updated my 11.2.0.2 test to 12.1.0.2 database. I did it using the manual method using perl script. I'm trying to convert the non - CBD CBD. But it fails with the following error.

  Can you please guide me where I am wrong?

  
  Connected to:
  Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production
  With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
  
  
  SQL> startup mount exclusive
  ORACLE instance started.
  
  
  Total System Global Area 2684354560 bytes
  Fixed Size                  3788008 bytes
  Variable Size            1006633752 bytes
  Database Buffers         1660944384 bytes
  Redo Buffers               12988416 bytes
  Database mounted.
  SQL> alter database open read only;
  
  
  Database altered.
  
  
  SQL> !mkdir -p /oracle/TEST/oradata/noncdb
  
  
  SQL> exec dbms_pdb.describe(pdb_descr_file=>'/oracle/TEST/oradata/noncdb/noncdbtest12c.xml');
  
  
  PL/SQL procedure successfully completed.
  
  
  SQL> shutdown immediate
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup
  ORACLE instance started.
  
  
  Total System Global Area 2684354560 bytes
  Fixed Size                  3788008 bytes
  Variable Size            1006633752 bytes
  Database Buffers         1660944384 bytes
  Redo Buffers               12988416 bytes
  Database mounted.
  Database opened.
  
  
  SQL> sho con_name
  
  
  CON_NAME
  ------------------------------
  test12c
  
  
  SQL> sho con_id
  
  
  CON_ID
  ------------------------------
  0
  
  
  SQL> create pluggable database exnoncdb_test12c
  as clone
  using '/oracle/TEST/oradata/noncdb/noncdbtest12c.xml'
  file_name_convert=('/oracle/TEST/oradata/','/oracle/TEST/oradata/noncdb/')
  copy;  2    3    4    5
  create pluggable database exnoncdb_test12c
                            *
  ERROR at line 1:
  ORA-65090: operation only allowed in a container database
  cted to:
  O
  
  

  Thank you

  Arul

  1723552 wrote:

  Hello

  I recently updated my 11.2.0.2 test to 12.1.0.2 database. I did it using the manual method using perl script. I'm trying to convert the non - CBD CBD. But it fails with the following error.

  Can you please guide me where I am wrong?

  1. SQL > startup mount exclusive
  2. . . .
  3. SQL > alter database open read-only.
  4. . . .
  5. SQL >! mkdir/oracle/TEST/oradata/noncdb Pei
  6. . . .
  7. SQL > shutdown immediate
  8. . . .
  9. SQL > startup
  10. . . .
  11. SQL > create pluggable database at exnoncdb_test12c
  12. as clone
  13. using the ' / oracle/TEST/oradata/noncdb/noncdbtest12c.xml'
  14. file_name_convert =('/Oracle/test/oradata/','/Oracle/test/oradata/noncdb/')
  15. copy;  2 3 4 5
  16. create exnoncdb_test12c of the database plug-in
  17. *
  18. ERROR on line 1:
  19. ORA-65090: operation only allowed in a database of the container
  20. Executive management to:
  21. O

      Arul

  This link shows the steps to follow:

  Adopting a Non - CBD as a snap-in database in a shared container database

  Looks like you MISSED a step.

  I think that your last START command (line #10 in my shortlist above) begins to the top of the newly converted DB and NOT the new CBD.

  See step of binding ' creation and plug a PDB file in cdb2 using noncdb manifest file.

  See where he uses '. oraenv' for cdb2 environmental? It doesn't seem like you have done this step. So I think that bad environment variables have been used when you did this last start.

  That's why you got the exception 60090 on 'operation only allowed in a database of the container' - you are NOT in a database of the container.

  Check your environment variables and make sure that you are connected to and the correct instance, started...

• Convert EPMA Essbase in Standalone Essbase

  Hi guys,.

  I'm working on an existing application to Essbase BSO. It seems to be an application of EPMA. But when I'm checking the last deployment status, I could not see anything like that. I could see that created the application date and date last modified. These dates are 2 years back. But business users are adding members and make the restructuring for the past two years to each month. That's why I think that although it is an EPMA Essbase application, it is not synchronized with EPMA and they use it as a standalone application Essbase. Now, I need to do the hourglass for this app Essbase model optimization. But I couldn't do this in EAS console,, as in an application of EPMA. 

  Now if I change the order of the dimensions in the workspace, of course, I need to deploy it.  But if I deploy my application Essbase in EAS so far would be in sync with the obsolete EPMA dimension. Could you please help me to achieve this optimization of hour glass without touching the workspace. It is also possible to convert the EPMA Essbase asks Essbase standalone application.

  Note: The current state of the application of EPMA Essbase is "deployed but lack of shared services.

  Its urgent for me. Help, please.

  Hello

  But what exactly do you want? you say you want to keep an EPMA application, but you do not want to touch the workspace?

  An Essbase application artifacts of nothing more than its outline, its data, its filters and other. So if you make a copy of your service Regional application, remove the application in the space of work/epma, probably clean up a fair bit in case the app folder and rename your copy app its original name, then you will have a standalone app Essbase.