Convert time in string

Similar Questions

• How to convert times from second to hh with CVI

  How to convert times from second to hh with CVI?

  Can anyone advice?

  It's here. As I told you, it's very simple:

  //----------------------------------------------------------------------
  // Function secToHMSstring ()
  //----------------------------------------------------------------------
  /// HIFN secToHMSstring ()
  /// HIFN The function takes an amount of seconds and returns a string with
  /// HIFN the corresponding value in H:M:S format
  /// HIPAR sec/Value in seconds to convert
  /// HIPAR verbose/If True use "hms" separators; if not, use ":" separator
  /// HIPAR string/The output string. It is responsibility of the programmer
  /// HIPAR string/that the string is large enough to keep the resulting text
  /// OUT string
  void secToHMSstring (int sec, int verbose, char *string)
  
  {
      int     hh = 0, mm = 0, ss = 0;
  
      if (sec >= 3600) {
          hh = sec / 3600;
          sec -= hh * 3600;
      }
      if (sec >= 60)
          mm = sec / 60;
      ss = sec - mm * 60;
  
      strcpy (string, "");
      if (verbose) {
          if (hh > 0) sprintf (string, "%s%dh", string, hh);
          if (mm > 0) { if (strlen (string)) strcat (string, " "); sprintf (string, "%s%dm", string, mm); }
          if (ss > 0) { if (strlen (string)) strcat (string, " "); sprintf (string, "%s%ds", string, ss); }
      }
      else {
          if (hh > 0) sprintf (string, "%s%d:", string, hh);
          if (mm > 0) {
              if (strlen (string)) sprintf (string, "%s%02d:", string, mm); else sprintf (string, "%d:", mm);
          }
          else if (strlen (string))
              strcat (string, "00:");
          if (strlen (string)) sprintf (string, "%s%02d",  string, ss); else sprintf (string, "%d", ss);
      }
  
      return;
  }
  

• Convert number to string in function, spell training?

  I saw a few posts asking how to convert a hexadecimal string to a number, but I saw nothing in regard to going the other way - how to convert a new number into a hexadecimal string. Can TestStand convert a number to a hexadecimal string in a function?

  Here's what I'm trying to do (Locals.CryTuneHex is a string containing a hexadecimal value represented and Locals.Freq_Meas is a digital):

  Locals.CryTuneHex = Val ("0 x" + Locals.CryTuneHex) + round (((320000 - Locals.Freq_Meas)/0.065),4)

  or in simpler terms:

  Locals.HexString = Locals.DecimalNumber

  I need to convert the right side of the equation (which is a decimal number) to a hexadecimal string in order to to store in the string variable on the left side of the equation. Is this possible? In my view, there are a Str() operator to convert to a string, but I need in hex, not only a string representation of the decimal number.

  Thank you!

  Pass a format to Str, like the people of the country. HexString = str (Locals.Number, "%x")

  To play with format strings, create a local number, right-click and select the Digital Format, and then select Hex to Type and watch how the format string varies when you change options.

• Convert the text string into array of words

  I'm trying to convert an input string of sentence written with spaces between words in an array of strings of 1 d with one word in each element of the array.

  That's what I have so far, but his does not work as I would like.   I have trouble getting in the array to zero at the beginning of each series.

  Thank you

  Why don't you just use the String Array to worksheet and specify a space as a separator?

  

• Converts a hexadecimal string to a signed Int

  Hey,.

  I was wondering if there was a way to convert a whole string. Now, here's the problem, the string is hexadecimal characters actually so in normal mode, I see my hexadecimal characters. I've attached a screenshot of my normal string indicator. What I want to do is to take these 4 characters and a 32-bit signed integer. Thoughts?

  You can do it with the analysis of string function:

  

  This would release "27".

• converting a hexadecimal string to withh on ascii bytes

  How to convert a hexadecimal string of numbers of bytes without ascii codes, then all the octets converted is expected to come in a package

  Your question is very ambiguous. Please explain.

  Can you give us a Vi containing an example of string and what you want out of it. What is the dataype 'packets '?

• Converts a hexadecimal string to ASCII by VBAI

  Good day, experts, OR the

  I would like to ask for help on the stage of the VBAI calculator. Is there a way I could convert a hexadecimal string to ASCII character? For example 25 (Hex) to %(ASCII) or, if not in the calculator to other methods? I'll have to send data via TCP/IP later.

  Thank you very much
  Andrei K.

  Now I understand what you want. You can actually do from TCP step. First of all, you need get the length of the string in a digital as you did in step of the calculator, but then you can send this digital as a hexadecimal string of ascii to TCP step. To do this, have the length of the string as a numeric result in the return of calculator. In the TCP step, add a "Write" command and insert a result. Select the digital output of the step of the calculator and U8 of the data format. You can use the display/Hex Normal display to view the data that will be sent, and when displaying normal view, you can see that it is a '%' value when length is 37. See the attached screenshot to see how I did it.

  Hope this helps,

  Brad

• Convert a hexadecimal string to byte array

  Hello

  I would like to convert a hexadecimal string (e.g. 0x156FD18A4) into an array of bytes, the problem is that I don't have any delimiter (for example 15 6F 8 a 4 D1) so I can't use the worksheet to an array of strings, I tried to do something on my own, but everything seems to be too complicated is there an appropriate way clean and neat to achieve what I want? (or maybe a clever trick to add delimiter every two characters in my original string)

  Thank you!

  
  

• Is there an easy way to convert a long string in a table?

  I can convert a long string in a table 1 d in analyzing and using the table of generation, but I would like to know if there is a feature to make this easier.

  For example:

  of / aaaaaaaabbbbbbbbccccccccdddddddd (string to ascii)

  for a table that is 1 d with each element having eight characters

  aaaaaaaa

  bath

  Larson

  Delahaye

  Thank you.

  Try something like this:

  

  (If you can guarantee that the length of the string is an integer multiple of 8, you one down the two triangular patterns on the top left.) )

• How to convert int to String

  How to convert int to String. I get the error 'cannot convert integer to int.

  Dim str As String = "abc";

  int NB = Integer.valueOf (str);

  Use Integar.parseInt (). But make sure your str contains the integer value (like str = '123') otherwise you will get the exception.

  String str = "123"; int num = Integer.parseInt(str);
  

  Concerning

  Bika

• Convert time GMT AEST(australian timing) in SQL

  I once solved based on the field. How to convert time resolved GMT WAS in where condition?

  Hi Gayathri Venugopal,

  Gayathri Venugopal wrote:

  I once solved based on the field. How to convert time resolved GMT WAS in where condition?

  You can do something like this:

  select from_tz(to_timestamp('2015-08-18 11:30:05','yyyy-mm-dd hh24:mi:ss'), 'UTC')
  at time zone 'Australia/West' from dual
  

  OR

  select from_tz(to_timestamp('2015-08-18 11:30:05','yyyy-mm-dd hh24:mi:ss'), 'UTC')
  at time zone 'Australia/Melbourne' from dual
  

  Don't know your data/settings NLS session, so it would not be a perfect solution, I guess.

  In addition, this issue concerns mainly SQL if you can post in the appropriate forum: SQL

  I hope this helps!

  Kind regards

  Kiran

• Convert time string hh: mm: its corresponding long value.

  Hi all

  I want to convert hh: mmtime S to its corresponding values long chain, I also searched supportforums messages but not a post is close to my question how do you please explain... Thanks in advance.

  http://www.BlackBerry.com/developers/docs/7.1.0api/java/lang/String.html#Substring(int,%20int) has a pretty good documentation and there is a lot of samples autour.
  This allows to mark your string in substrings as
  "08" (hours), '00' (minutes) and '00' (seconds).
  Integer.parseInt () allows to convert these values in integer values.

  The next class you use is calendar. Call instance() to get a Calendar object and http://www.blackberry.com/developers/docs/7.1.0api/java/util/Calendar.html#set(int,%20int) allows to set the appropriate fields.
  for example, with hourValue as type int with the value of the substring of the hour and myLittleCalendar as a calendar item:
  myLittleCalendar.set (Calendar.HOUR, hourValue);

  Note that a newly built calendar a date set to 0, then 01.01.1970, if you set only the component "hour", you will have the time this day.

• Converts a date into a date/time object string

  I have a JDBC call to enter data, including a date/time stamp.  For the life of me, I can't understand how to convert this string to a date/time field correct.  It is important, because I need to use validation strings to present a time more simplified users on a form.  But I like to keep the original date/time, so I can insert it again into a SQL db at the end.  I created a test process, so I can watch the progress.

  
  ' input string = ' 18/08/2010 16:41:23.

  Expression = dateTime-analysis-withFormat (/process_data/@datestring,"yyyy/MM/dd hh', 'FR', 'US', 'WIN',"CDT")
  
  Result = 18 August 2010 22:41:23 this
  
  So I try to put this value into a date field and I get the error:
  : Invalid ISO8601 DateTime:August 18, 2010 21:41:23 GMT:java.text.ParseException: date of: "August 18, 2010 22:41:23 this."

  
  I tried like 100 different variations to associate with an object date and time with the same result.  I can use the functions of analysis-dateTime or analysis-dateTime-withFormat throughout the day, but I can't get this string value in a proper date field.  Any ideas?  Please help as I'm about to pull out my hair... ... who won't be pretty.

  (Note: I know that my time zone came through OK but I am not concerned about it right now)

  To resolve this problem, I use ExecuteScript activity with the code:

  import java.util.Date;
  import impossible;

  String dateString = patExecContext.getProcessDataStringValue ("/ process_data/@input");

  SimpleDateFormat formatter = new SimpleDateFormat ("yyyy-MM-DD hh: mm :"); ")
  Date date = (Date) formatter.parse (dateString);

  patExecContext.setProcessDataValue ("/ process_data/result", date);

  where

  entry - process line with the dates of the string variable '2010-01-01 23:59:59 '.

  Date - date process variable

• Convert time in digital channel display format in a script

  I am trying to convert the display format of a string that contains the time values (mm/dd/yyyy hh:nn:ss.ffff) of time digital. I know I can do this in the Properties section of the data portal, but I want to do in a script. I want to be able to convert it automatically without having to do it manually every time I have import new data. Which syntax is necessary for this?

  I already tried the commands ChnPropSet (and ChnPropValSet), but it does not change the display format after that I executed the script. Thanks for your help.

  Data.Root.ChannelGroups (1). Channels ("time"). Properties ("DisplayType"). Value = "time".
  
  Data.Root.ChannelGroups (1). Channels ("time"). Properties ("DisplayType"). Value = "digital."

  For me the two lines run to the type. Be aware that the property is the name of "displaytype" not localized user interface.

  You can determine the name of a property of drag and drop in the DIAdem script editor.

• digital conversion (in the format of the time) to string

  Hello

  I have a digital control (at the time format) in which I hours: minutes: seconds and I want to convert it to a string. The problem is that the number of hours is incremented by one, and if I insert a number of hours exceeds 24 the string is not displayed correctly.

  What should I do to make this work?

  Thank you

  You use a function that should be a numeric value that is based on the UTC clock and then convert it to a clock display based on your current time zone.  My guess is that you are in GMT + 1, which is why you see an hour added to it.

  You must use the Format function in the string for this with appropriate time for the format codes codes.    %t is relative time.  It takes number you enter and turns it into hours, minutes, and seconds, rather than trying to create a view of time for her.  This is why your code cannot ride beyond 24 hours.   (There is no 25 hours on a clock face).