Converter does not

Similar Questions

• Connect a wireless printer anywhere, wired derivation convert, does not have radio, add WPA2 security.

  Update- good because when the wireless radio failed to convert a wired Ethernet printer to wireless technology, or if you want your printer to support greater security WPA2 wireless.

  Updated - connect to a hotel/motel/school dormitory may not work if the network uses Enterprise authentication requesting a user name and password on your computer.

  This article will try to explain how to connect your wireless devices, including printers, to a wireless network when you are away from home.  The problem when you're in a hotel, motel, room student or other areas is your computer connects fine, but your wireless printer, you have brought with you, has connection/security problems.  Other people/wireless devices can find the printer on an open network, connect you to the printer and start printing without reason just because 'they can do. "

  You'll need is a small wireless travel router.  TP-LINK TL-WR702N Wireless N Nano router or other router of trip is all you need.  The WR702N is available on eBay or Amazon for only $21.00, that's right, only $ 21.

  This device does not support the authentication of company systems because it cannot meet any username and password prompts these system as your computer can.  However, it will connect to a standard WPA SSID and your computer, but if you receive a browser for other questions page redirect, it won't work.

  It's a small powerful travel router which built in 5 modes of operation (more than your home router can do):

  1. AP mode
  2. Client mode
  3. Repeater mode
  4. Router mode
  5. Bridge mode

  The TP-WR702N information is found here:

  http://www.TP-link.com/en/products/details/?model=TL-WR702N#over

  To see the overview of applications see here first to understand:

  http://www.TP-link.com/en/products/details/?model=TL-WR702N#app

  I won't go into the details on how to configure these modes in the TP Link router Nano as the manual does a great job.  One thing you must remember is that you must assign a static IP address on your wired Ethernet connection of computers to access the Web interface internal of the Nano.  The Nano is configured with an Ethernet cable at any time.  It's security that the router that has DHCP disabled so if you connect to a network, you won't crash it with an IP address conflict.  The Nano is powered by a USB cable and comes with a USB AC adapter too.

  The IP address of the Nano is default 192.168.0.254.  Set your computers Ethernet Port, adapter not wireless, a static IP 192.168.0.1, 255.255.255.0 DNS address.  You have to find a way to do it yourself, but it is explained in the manual and on the web for the operating system of your computer.

  This leaves your wired Ethernet connection to a static IP address and your adapter wireless DHCP.  Don't forget to put your wired to DHCP if you need to use it later for a wired connection.  Connect the Ethernet cable from your computer to the router Nano.

  Set up your browser by going to 192.168.0.254 (Nano IP address) in the address bar and you'll get the username and password login screen.  The default username and password is admin/admin, you can change it if necessary.

  Set the Nano bridged mode:

  Other modes will be mentioned later but for now; Bridge mode will serve as this isolates and creates your own SSID private the hotel/motel/dorm room open wireless network SSID.  In Bridge Mode you entrance and connect to the Rangoon SSID (paraphrasing) AND set up your own small network with your own SSID and password.  Your SSID will be separated and protected through WPA2-AES security that you set up.   You will be able to go online normally fine, but all of your devices will now connect to your private SSID.

  Example:

  Hotel SSID: HILTON Hotel Paraphrase and password: GUEST

  Nano SSID: MYNETWORK Nano Paraphrase/password: HP5514

  With this information, the rest is easy.  You set your SSID private and password first, they you must find and connect to the SSID and password hotels.  Simply click on the SURVEY button and a list of all available networks will be displayed along with their MAC addresses.  Find the network SSID, you want to connect (bridge) too and click on "connect".  Information is entered automatically.  I suggest that you also edit your channel wireless on a fixed channel as the 1, 6 or 11, never 'auto '.

  Save your settings and you will be told to restart the router.  Follow the instructions and always restart the router after any changes take effect.  This Nano restarts in 20 seconds approximately.

  Now on your computer when you scan available networks, you will see MYNETWORK.  Connect your computer to the SSID and enter your HP5514 password and you're on!  Start surfing or something else.

  Now, what about your printer?  The printer must be set to DHCP and assuming that you have a printer wireless with front panel:

  1. Go to (Assistant) wireless configuration screen.
  2. Search for available networks.
  3. Select: MYNETWORK
  4. Enter your password: HP5514
  5. To connect!

  In about 15 seconds, you're connected!   Oh, guess what?  The Nano has a WAN/LAN port and in Bridge mode, it is a LAN port that is connected to your network too!  Then plug into a printer/computer Ethernet cable, if you wish.

  Your printer will work as usual with no change at all.  I set up in my house to test and it connected perfectly to my HP5514 wireless printer.  All the tools, diagnostics, printer functions, alerts of ink were normal.

  You're done!

  The bottom can be used anywhere to create a local private network so that you and others can use your printer.

  Now, what about the changes?  If at home, you can use the Nano in Repeater mode to connect to your own network and extend the reach of all devices.  Even as the Bridge mode, but you're on your network using your SSID and the word normal, so everyone can use the printer.

  Don't worry what you heard with speed of execution of a router in Repeater Mode.  Most routers House when running in wireless Repeater mode should be set to no encryption or WEP only.  Here max speed is 54 Mbps.  This Nano turns at full speed of 150 Mbps in these modes, using the highest security WPA2-AES (personal).

  Remember that the size is small, so it's good to perhaps more than 50 feet.  HD video streaming was impeccable and surf watch video at the same time was perfect.

  I hope this help you when business or vacation.  Some hotels charge for EACH device connection.  With the implementation above, it takes only a charge for multiple devices, such as cell phones, iPads, light fires, computers or anything else you want to connect.

  EDIT - do not forget that this Nano device has an Ethernet connection that once configured, you can use to connect a wired computer or wired Ethernet printer.  It is a good radio your printer wireless doesn't have to convert a wired Ethernet wireless printer or if you want your printer to support greater security WPA2 wireless.

  Have fun!

  Read here on how to connect your printer to a network asking for additional security and information (username and password).

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/how-to-connect-your-wireless-printer-to-a-network-requesting/TD-p/4468642

  Most likely, you won't be able to connect.

• Converter does not recognize my rocket

  I got my rocket hip and downloaded the converter and everything, but when I pull up, he says theres no device. I tried unplugging and plugging back in my rocket and other but its does not work.

  Help? T_T

  ^. ^ yay Tounsiiaa love

  problem solved

• DNG Converter does not recognize the NAVE or ARW files

  Hi, I'm using CS5 and cannot open RAW files. I've already updated the plugin to 6.7 and I still can't open them, so I downloaded the DNG Converter, but it does not seem to recognize the NAVE or 2 different cameras ARW files. What's the deal here?

  In fact, leave it as what. The reason to change depends on if or not you need to convert for the widest compatibility with versions prior to leaving. for example, conversion of 6.6 allows you to open the DNG in CS5. (Curiously, 7.1 was not until CS6/CC, if I remember correctly, but maybe it's because your camera models. At least you know that setting is there in case you have problems.)

• Adobe's DNG Converter does not recognize the Raw of Lumix GX8 files.

  I use Lightroom 5 on a desktop Win 10.

  Downloaded 9.3.0 DNG Converter but it does not recognize the GX8 Raw files. How can I process Raw GX8 files?

  The DMC - GX8 was supported in 9.1.1

  Have you downloaded from the Adobe site?

  Download the latest DNG Converter 9.3: Mac | Win

• Converter does not reach 1% - "an error occurred during conversion:"converter.fault.ConverterFileFault"

  I'm trying to convert a laptop of ageing of a virtual machine, but it does not reach 1% with the vague error "an error occurred during conversion:"converter.fault.ConverterFileFault. "

  With VMware vCenter Converter Standalone Client 5.5.1 build 1682692 locally running the conversion of the machine running.

  On a laptop with WinXP Sp3, with a single drive, by recording the VM on a USB hard drive attached.

  I have run chkdsk on the drive. (with the F option) and defragmented several times

  Shadow copy services have been restarted and are running.  I even downloaded the VSS SDK and replaced the *.dll.
  It is with the latest version of the client converter

  No firewall is active.

  I am logged on as administrator, even tried to create a role of administrator with the name "Administrator".

  Drive is not encrypted I can say (no Truecrypt)

  The xp includes backup works (i.e. work VSS)

  I looked at the other questions/logs here, but do not see the same exact

  VMWare Converter error: impossible to clone the volume C

  Converter fails at 1%

  UPDATE: Solution via Hack
  I could get this job sort of a hard-working hack.

  I first downloaded Acronis image 2014 (a free 30 day trial) then who used to capture the image of the operating system, the * tib file is about 40 GB in size.

  Unfortunately VMWare converter works only with version of Acronis 2012, so the *.tib file could not be used directly to the source of the virtual machine

  So I created inside VMWare Workstation a new empty VM for Windows XP

  I gave her 2 virtual disks hard 50 GB and 50 GB mapped as C: and H:

  reinstalled windows in the C

  copied the *.tib in the secondary hard drive H: as shared folders (for example how a USB is sometimes mounted) are not accessible when the Acronis is restoration of the tib via its custom BootLoader

  Download and install Acronis image 2014 on this new fresh OS

  used Acronis to restore from this backup on H: * tib in the C: crush installing the OS

  reactivated again, windows

  fighting pilots who the real differeed

  Defragment the drive VMware

  Seems to work as expected.

  I got this job, see the update on the use of Acronis to work around the problem.

• Converter does not see the disks in HP BL460c G6

  Hello

  I have a HP c3000 enclosure of blade with some blades BL460c G6 running Windows 2008 R2 which I would like to convert virtual machines.

  The problem is... in the settings page... among the 'data copy' tab... It does not show any source disks

  Can someone tell me please how to fix this?

  I am running the latest version of converter standalone (4.3)

  I've also attached a screenshot of the problem

  Thank you

  a guess:

  Try the conversion with UAC disabled. Maybe this prevents detect readers.

  Just to make sure, you use the local "Administrator" account or just a user with administrative rights?

  André

• Convert does not reach 1%

  Hello

  The situation is like this:

  I've set up two ESXi hosts in my organization and converted in one of the physical machine, which is now in production.

  Then my license for vSphere arrived and I updated the keys and installed vCenter and all is great.

  Now, I'm trying to back up my machine on the second host using vCenter Converter and I receive the following error after you start the conversation:

  Section of VMware vCenter Converter, pid = 5320, version = version 4.2.1 = build-327369, option = released
  [2011-05-09 01:46:25.675 05448 WARNING "App"] Cannot create the writer console
  [2011-05-09 01:46:25.691 00264 info "App"] Current working directory: C:\Program VMware vCenter Converter
  [2011-05-09 01:46:25.691 00264 info "App"] Try converter_server
  [2011-05-09 01:46:25.706 00264 info "App"] [shutdownMgr, 25] Stop UFA registered handler.
  [2011-05-09 01:46:25.706 00264 info "App"] [helper, 453] Initializing the SSL context
  [2011-05-09 01:46:25.706 00264 info "Libs"] Using the libcrypto, version 9080CF
  [2011-05-09 01:46:26.441 00264 info "App"] Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000
  [2011-05-09 01:46:26.441 00264 info "App"] [helper, 499] Initialization of certificates
  [2011-05-09 01:46:26.441 00264 info "App"] [task, 2062] [LRO] 32 max EIB
  [2011-05-09 01:46:26.441 00264 info "App"] [task, 2064] [LRO] 6 reserved internal LROs
  [2011-05-09 01:46:26.441 00264 info "App"] [task, 2066] [LRO] 6 reserved for short-EIB
  [2011-05-09 01:46:26.441 00264 info "App"] [task, 2068] [LRO] 12 reserved long EIB
  [2011-05-09 01:46:26.441 00264 info "App"] [task, 2080] Operational life of 86400 seconds [LRO]
  [2011-05-09 01:46:26.503 'Local' WARNING 00264] Duplicate key "hi_IN" in the file "C:\Program VMware vCenter Converter\locale\iso2win.vlcl"
  [2011-05-09 01:46:26.503 'Local' WARNING 00264] Duplicate key 'az_AZ' in the file "C:\Program VMware vCenter Converter\locale\iso2win.vlcl"
  [2011-05-09 01:46:26.503 'Local' WARNING 00264] Duplicate key 'sr_SP' in the file "C:\Program VMware vCenter Converter\locale\iso2win.vlcl"
  [2011-05-09 01:46:26.503 'Local' WARNING 00264] Duplicate key 'az_AZ' in the file "C:\Program VMware vCenter Converter\locale\isodata.vlcl"
  [2011-05-09 01:46:26.503 'Local' WARNING 00264] Duplicate key 'sr_SP' in the file "C:\Program VMware vCenter Converter\locale\isodata.vlcl"
  [2011-05-09 01:46:26.503 'Local' WARNING 00264] Duplicate key 'uz_UZ' in the file "C:\Program VMware vCenter Converter\locale\isodata.vlcl"
  [2011-05-09 01:46:26.550 00264 'Local' info] Adding locale path C:\Program VMware vCenter Converter\locale\ to local map
  [2011-05-09 01:46:26.550 00264 'Local' info] Locale subsystem initialized from C:\Program VMware vCenter Converter\locale\ with in the default locale.
  [2011-05-09 01:46:26.566 00264 info "Libs"] [ADS] Local domain: *.
  [2011-05-09 01:46:26.566 00264 info "Libs"] [ADS] IsWorkgroup: No.
  [2011-05-09 01:46:26.566 00264 info "Libs"] [ADS] Local machine: APP
  [2011-05-09 01:46:26.581 00264 info "App"] BaseScheduler initialization complete - __thiscall Sub Converter::Server:Scheduler:BaseScheduler: ("d:/build/ob/bora-327369/bora/sysimage/ufad/server/scheduler/baseScheduler.cpp:112")
  [2011-05-09 01:46:26.612 00264 info "App"] [plugin, 144] ServerPlugin Init
  [2011-05-09 01:46:26.612 00264 info "App"] Try ufa_agent
  [01:46:26.612 00264 info 'Ufa' 2011-05-09] Initializing the SSL context
  [01:46:26.612 00264 info 'Ufa' 2011-05-09] MIME type: properties = text/plain
  [01:46:26.612 00264 info 'Ufa' 2011-05-09] MIME type: text/javascript = js
  [01:46:26.612 00264 info 'Ufa' 2011-05-09] MIME type: css = text/css
  [01:46:26.612 00264 info 'Ufa' 2011-05-09] PipeName server web micro: \\.\pipe\vmware-converter-web
  [2011-05-09 00264 info 'HttpSvc.HTTPService' 01:46:26.612] Use default to nonChunkingAgents: "VMware VI Client |" VMware-customer | VMware-customer/3. * »
  [2011-05-09 00264 info 'HttpSvc.HTTPService' 01:46:26.612] Use default to agentsNeedingContentLength: 'VMware-customer '.
  [2011-05-09 00264 info 'HttpSvc.HTTPService' 01:46:26.612] Maximum size of response in the buffer is 104857600 bytes
  [2011-05-09 01:46:26.612 00264 info "HTTP server"] HTTP server created with docroots vCenter C:\Documents and Settings\All Users\Application Data\VMware\VMware Converter\docRoot, segmented responses enabled: true
  [01:46:26.612 00264 info 'Ufa' 2011-05-09] Server web created micro
  [01:46:26.612 00264 info 'Ufa' 2011-05-09] Plugin initialized
  [2011-05-09 01:46:26.628 10708 info "App"] [task, 333] [task-internal-1]-----BEGIN-----TaskManager
  [2011-05-09 01:46:26.628 00264 info "App"] Connection to the host on port 81 192.168.1.6
  [2011-05-09 01:46:26.659 11360 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 01:46:26.659 11360 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 01:46:26.659 11360 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 01:46:26.675 00264 info "App"] Authentication extension com.vmware.converter
  [2011-05-09 01:46:26.675 12240 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 01:46:26.675 12240 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 01:46:26.675 12240 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 01:46:26.675 00264 info "App"] Load all the elements of the scheduler database tables. -Sub __thiscall Converter::Server:Scheduler:BaseScheduler:LoadSchedulerItemIdMap (void) ("d:/build/ob/bora-327369/bora/sysimage/ufad/server/scheduler/baseScheduler.cpp:70")
  [2011-05-09 01:46:26.675 00264 info "App"] Load everything in the job scheduler database tables. Map point the Planner contains 0 items. -Sub __thiscall Converter::Server:Scheduler:PriorityQScheduler:LoadPriorityQ (void) ("d:/build/ob/bora-327369/bora/sysimage/ufad/server/scheduler/priorityQScheduler.cpp:196")
  [2011-05-09 01:46:26.675 00264 info "App"] Reuse existing VIM connecting to 192.168.1.6
  [#1] [2011-05-09 01:46:26.691 06988 info "Libs"] HOSTINFO 8178756350016105 @ 2327540000Hz-> 0 Hz 1000000
  [#1] [2011-05-09 01:46:26.691 06988 info "Libs"] HOSTINFO ((x * 3779137210) > > 43) +-3513905818848
  [2011-05-09 01:46:26.691 00264 info "App"] Reuse existing VIM connecting to 192.168.1.6
  [2011-05-09 01:46:26.691 12240 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 01:46:26.691 12240 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 01:46:26.691 12240 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 01:46:26.706 00264 info "App"] [plugin, 164] ServerPlugin Start
  [2011-05-09 00264 info 'ProxySvc' 01:46:26.706] Created proxy service: http port (81), https port (443)
  [2011-05-09 00264 info 'ProxySvc' 01:46:26.706] Created end point 81
  [2011-05-09 01:46:26.706 00264 info ' ProxySvc-443' '] vmacore/ssl/useSSLCtxPool: true
  [2011-05-09 01:46:26.706 00264 info ' ProxySvc-443' '] vmacore/ssl/serializeServerHandshake: false
  [2011-05-09 00264 info 'ProxySvc' 01:46:26.706] Created end point 443
  [2011-05-09 00264 info 'ProxySvc' 01:46:26.706] Initialized proxy service
  [2011-05-09 01:46:26.706 00264 info ' ProxySvc-81' "] Proxy: Start-up of the new Proxy service
  [2011-05-09 01:46:26.706 00264 info ' ProxySvc-443' "] Proxy: Start-up of the new Proxy service
  [01:46:26.706 00264 info 'Ufa' 2011-05-09] SOAP channel name: \\.\pipe\vmware-converter-server-soap-vc
  [2011-05-09 00264 info 'Ufa.HTTPService' 01:46:26.706] Use default to nonChunkingAgents: "VMware VI Client |" VMware-customer | VMware-customer/3. * »
  [2011-05-09 00264 info 'Ufa.HTTPService' 01:46:26.706] Use default to agentsNeedingContentLength: 'VMware-customer '.
  [2011-05-09 00264 info 'Ufa.HTTPService' 01:46:26.706] Maximum size of response in the buffer is 104857600 bytes
  [2011-05-09 01:46:26.706 00264 info 'Ufa'] doPendedPostBodyReads: false, enableChunkedResponses: true
  [2011-05-09 00264 info 'Ufa.HTTPService' 01:46:26.706] Has started the Service http: [Vmacore::System:NamedPipeServerWin32:03147 D 10 of class]
  [01:46:26.706 00264 info 'Ufa' 2011-05-09] SOAP (on the named pipe) started the \\.\pipe\vmware-converter-server-soap-vc hose. enableRemoteAccess = false nonRootAccess = true, useSSL = false
  [2011-05-09 00264 info 'HttpSvc.HTTPService' 01:46:26.706] Has started the Service http: [Vmacore::System:NamedPipeServerWin32:031455 B 0 class]
  [01:46:26.706 00264 info 'Ufa' 2011-05-09] Started Web server
  [01:46:26.706 00264 info 'Ufa' 2011-05-09] Plugin has started
  [2011-05-09 01:46:26.706 00264 info "App"] [serviceWin32, 413] vmware-converter-Server-vc service started
  [#2] [2011-05-09 01:58:53.311 12240 info "App"] Reuse existing VIM connecting to 192.168.1.6
  [#2] [2011-05-09 01:58:54.186 07808 error "App"] Found dangling SSL error: error:00000001:lib (0): func (0): reason (1) [0]
  [#2] [2011-05-09 01:59:50.685 06988 info "App"] [agentManager, 83] [AgentManager] Install the Agent on 192.168.1.7
  [#2] [2011-05-09 02:04:47.918 00264 info "App"] Connection to the host on port 443 192.168.1.6
  [#2] [2011-05-09 02:04:47.933 00264 info "App"] Sharing session for user *-*.
  [#2] [2011-05-09 02:04:47.933 00264 info "App"] ComputeResource for vim. HostSystem:host - 17 is vim.ComputeResource:domain - s15
  [#2] [2011-05-09 02:04:47.933 00264 info "App"] ResourcePool to vim.ComputeResource:domain - s15 is vim. ResourcePool:resgroup - 16
  [#2] [2011-05-09 02:04:47.933 00264 info "App"] ComputeResource for vim. ResourcePool:resgroup - 16's vim.ComputeResource:domain - s15
  [#2] [2011-05-09 02:04:47.949 00264 info "App"] Data Center for vim.ComputeResource:domain - s15 is vim. Datacenter:Datacenter - 2
  [#2] [2011-05-09 02:04:47.949 00264 info "App"] VM for vim root folder. Datacenter:Datacenter - 2 is vim. File: Group-v3
  [#2] [2011-05-09 02:04:47.949 00264 info "App"] Reuse existing VIM connecting to 192.168.1.6
  [#2] [2011-05-09 02:04:47.949 00264 info "App"] Connection to the host on port 443 192.168.1.6
  [#2] [2011-05-09 02:04:47.965 00264 info "App"] Sharing session for user *-*.
  [#2] [2011-05-09 02:04:47.965 00264 info "App"] Programmed timer cancelled, succeeds StopKeepAlive
  [#2] [2011-05-09 00264 info 02:04:47.965 ' vmomi.soapStub [2]'] Reset Adapter stub server TCP:192.168.1.6:443: closed
  [#2] [2011-05-09 02:04:47.965 00264 info "App"] Programmed timer cancelled, succeeds StopKeepAlive
  [#2] [2011-05-09 00264 info 02:04:47.965 ' vmomi.soapStub [3]'] Reset Adapter stub server TCP:192.168.1.6:443: closed
  [#2] [2011-05-09 02:04:47.965 00264 info "App"] Reuse existing VIM connecting to 192.168.1.6
  [#2] [2011-05-09 02:04:47.980 00264 info "App"] ComputeResource for vim. ResourcePool:resgroup - 16's vim.ComputeResource:domain - s15
  [#2] element Planner [2011-05-09 02:04:48.027 00264 info "App"] with id = "1" created - __thiscall int Converter::Server:Scheduler: ("d:/build/ob/bora-327369/bora/sysimage/ufad/server/scheduler/priorityQScheduler.cpp:43")
  [2011-05-09 02:04:48.043 11360 info "App"] Point timer 1 to run in time 21748264
  [2011-05-09 02:04:48.058 09048 info "App"] Connection to the host on port 81 192.168.1.6
  [2011-05-09 02:04:48.058 09940 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 02:04:48.058 09940 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 02:04:48.058 09940 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 02:04:48.074 09048 info "App"] Authentication extension com.vmware.converter
  [2011-05-09 02:04:48.074 09940 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 02:04:48.074 09940 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 02:04:48.074 09940 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  Certificates to host television is not complete.
  [2011-05-09 02:04:48.074 09048 info "App"] ComputeResource for vim. HostSystem:host - 17 is vim.ComputeResource:domain - s15
  [2011-05-09 02:04:48.074 09048 info "App"] ResourcePool to vim.ComputeResource:domain - s15 is vim. ResourcePool:resgroup - 16
  [2011-05-09 02:04:48.074 09048 info "App"] ComputeResource for vim. ResourcePool:resgroup - 16's vim.ComputeResource:domain - s15
  [2011-05-09 02:04:48.090 09048 info "App"] Data Center for vim.ComputeResource:domain - s15 is vim. Datacenter:Datacenter - 2
  [2011-05-09 02:04:48.090 09048 info "App"] VM for vim root folder. Datacenter:Datacenter - 2 is vim. File: Group-v3
  [2011-05-09 02:04:48.090 09048 info "App"] Connection to the host on port 443 192.168.1.6
  [2011-05-09 02:04:48.105 09048 info "App"] Sharing session for user *-*.
  [2011-05-09 02:04:48.105 09048 info "App"] Reuse existing VIM connecting to 192.168.1.6
  [2011-05-09 02:04:48.137 09048 info "App"] [vcTask, 66] task [1] [VCTaskMap] task - 1:task - 7
  [2011-05-09 02:04:48.152 09048 info "App"] Reuse existing VIM connecting to 192.168.1.6
  [2011-05-09 02:04:48.215 09048 info "App"] A started task "task 1" for employment = "job-7", item = "1" - __thiscall Sub Converter::Server:Job:JobProcessorImpl:StartProcessingJobs (void) ("d:/build/ob/bora-327369/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:350").
  [2011-05-09 02:04:48.246 03924 info "App"] [task, 333] task [1]-----BEGIN-----convert
  [2011-05-09 02:04:48.293 03924 error "App"] Found dangling SSL error: error:00000001:lib (0): func (0): reason (1) [0]
  [#3] [2011-05-09 02:05:25.777 05892 info "App"] Reuse existing VIM connecting to 192.168.1.6
  [2011-05-09 02:06:18.308 03924 info "App"] [taskSpec, 464] task [1] [TaskMap] task - 1:task - 1
  [2011-05-09 02:06:33.698 03924 info "App"] Reuse existing VIM connecting to 192.168.1.6
  [2011-05-09 02:09:14.369 03924 info "App"] Reuse existing VIM connecting to 192.168.1.6
  [2011-05-09 02:09:20.557 03924 error "App"] [task, 345] [LRO] Unexpected exception: converter.fault.CloneFault
  [2011-05-09 02:09:20.604 03924 info "App"] [task, 374] task [1] - ERROR - convert: converter.fault.CloneFault
  {(converter.fault.CloneFault)
  dynamicType = < unset >
  faultCause = (vmodl. NULL in MethodFault),
  Description = "Unknown Exception"
  MSG = ""
  }
  [2011-05-09 02:09:20.604 03924 info "App"] [diagnosticManager, 260] TaskInfo recovered to "converter.task.Task:task - 1" mapping "converter.task.Task:task - 1".»
  [2011-05-09 02:09:20.604 03924 info "App"] [diagnosticManager, 300] The task with id = "task 1" turned out to be a task 'recent '.
  [2011-05-09 02:09:20.604 03924 info "App"] [diagnosticManager, 314] No group of existing log not found for task with id = "task 1". The task is still 'young' so a bundle of newspapers going now is assigned.
  [2011-05-09 02:09:20.604 03924 info "App"] [diagnosticManager, 756] Recovery of the related tasks of diagnosis for the tasks of server with id = "task 1".
  [2011-05-09 02:09:20.729 12148 info "App"] Suspended 1 elements of Planner for employment (job-7) - __thiscall Sub Converter::Server:Job:JobProcessorImpl:SuspendJobAux(const_class_Converter::Server::Job::InternalJob_&,class_Converter::VdbConnection_&) ("d:/build/ob/bora-327369/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:823")

  Please, any ideas?

  Questions of the converter are not always fun. have you tried to install the msi covertor manually in the box to be converted and tried it this way?

  BTW I don't understand what you mean by creating a virtual machine for backup on a different host? Converter is not really designed for backup...

  Follow me @ Cloud - Buddy.com

• Converter does not reach 99% - Ubuntu 10.04

  Hello

  I'm doing a p2v of a server with Ubunto 10.04 LTS and continues failing at 99%. I use 5 converter and send to vcenter, I also root of the server. I tried once to power on the virtual machine if failed (perhaps it could start) but said that the operating system was not found.

  Thank you!

  Hello. I got a similar deal last week.

  You need to first install the certificate manually in the certificate store, double click on it to resolve the error.

  You must then run the task with the parameter powerOffHelperVm to false and the parameter SourcePasswordInHelperVm to true in the file converter - Worker.xml, and then restart the vmware converter worker.
  

  The error always, but with the virtual machine state the configuration scripts and settings finished ok.

  Reggards.

  Cristian S.

• Media Converter does not show SD card

  When I used MEdia converter before, he showed the sansa and the SD card, and I could choose which device to synchronize. now, it only shows the player and all the videos that I convert and copy to the SD card is not read by the sansa. How to format the card to be read by the sansa

  I got it. I just turned it into mode MSC and then formatted the SD and Sansa in windows Explorer. When the device is in MSC mode, Media Converter displays now both devices

• Custom converter does not not in ADF

  Hi gurus,

  I use Jdeveloper 11.1.1.7.0 (Build JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493) and try to create a simple custom converter to convert the string to uppercase.

  I can see out of PON show uppercase value, but the value is not rendered in the user interface.

  Steps to follow:

  1 create the converter of java class called UpperConverter

  2 register in faces-config. XML

  3 set the property of af: inputText as below

  < af:inputText value = "#{bindings." TestName.inputValue}.

  label = "#{bindings." TestName.hints.label}.

  required = "#{bindings." TestName.hints.mandatory}.

  columns = "#{bindings." TestName.hints.displayWidth}.

  maximumLength = "#{bindings." TestName.hints.precision}.

  shortDesc = "#{bindings." TestName.hints.tooltip}"id ="it1.

  immediate = "true" autoSubmit = "true" >

  < f: validator binding = "#{bindings." TestName.validator} "/ >"

  < / af:inputText >

  package xx.oracle.apps.fnd.custom.view.converters;

  to import java.util.Collection;

  import java.util.Collections;

  javax.faces.component.UIComponent import;

  Import javax.faces.context.FacesContext;

  javax.faces.convert.Converter import;

  Import org.apache.myfaces.trinidad.convert.ClientConverter;

  / public class UpperConverter implements converter, {ClientConverter}

  public UpperConverter() {}

  Super();

  }

  public String getClientLibrarySource (FacesContext facesContext) {}

  Returns a null value.

  }

  public Collection < String > getClientImportNames() {}

  Return Collections.emptySet ();

  }

  public String getClientScript (FacesContext facesContext,

  UIComponent uIComponent) {}

  Returns a null value.

  }

  public String getClientConversion (FacesContext facesContext,

  UIComponent uIComponent) {}

  Returns a null value.

  }

  public getAsObject (FacesContext facesContext Object,

  UIComponent uIComponent, String string) {}

  System.out.println ("value GetAsObject:" + string);

  If (!) (String.Equals (null)) | (chaîne == ""))) {

  System.out.println ("GetAsObject convert value:" + string.toUpperCase ());

  return string.toUpperCase ();

  }

  Returns a null value.

  }

  public String getAsString (FacesContext facesContext,

  UIComponent uIComponent object object) {}

  System.out.println ("value of GetAsString:" + object.toString ());

  Return object.toString () .toUpperCase ();

  }

  }

  
  

  Enjoy all the entries.

  
  

  Kind regards

  Ferrere
  

  Hello

  I don't see the converter applied to the inputtext. I was expecting the inputtext will be like:

• 7.4 RAW converter does not work

  I just download the converter 7.4 as I couldn't open my new nikon D7100 premieres. I can not yet open early. What did I miss?

  No one can tell you anything without adequate system information or other technical details such as which version of PS.

  Mylenium

• 5 converter does not recognize the partition LVM on Oracle Linux 6

  I have two physical servers running Oracle Linux Server release 6.3 64-bit.  They each have a partition/Boot which is ext4 and the rest on a LVM partition:

  / dev/map/vg_cleveland-lv_root / ext4 defaults 1 1
  UUID = 3d37688e-305 a-4974-9bb7-f02232b78790/Boot ext4 defaults 1 2
  / dev/map/vg_cleveland-lv_swap swap swap defaults 0 0
  tmpfs/dev/shm tmpfs defaults 0 0
  devpts/dev/pts devpts gid = 5, mode = 620 0 0
  Sysfs/sys sysfs defaults 0 0
  proc/proc proc defaults 0 0

  vCenter Converter only recognizes the / boot partition in the ' Data to copy "section"Select volumes to copy.

  If I leave before the conversion fails when you try to reconfigure the virtual computer.  I looked in the user guide and google a bit but I can't seem to find why the LVM ext4 partition is not recognized by the converter 5.

  Yes, it seems that the output has changed in more recent versions, so we need to update converter accordingly... but always the solution to workaround with the older LVM version on the source (how old?) should work...

• PNG converter does not work

  new camera Psc5 can't read raw files. Downloaded the PNG Converter it works for a week and now it doesn't.
  tried to erase and install the program, but it did not work.

  Help, please

  Re-install from one of these links:

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 8.7.1

  Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 8.7.1

  Be sure that your device is supported by 8.7.1: Camera Raw plugin | Compatible cameras

  Also, make sure that you select a folder containing raw files, not the files themselves.

  Benjamin

• Converter does not recognize hard drive

  Hello

  my physical machine is a Dell Latitude E6510, Win 7 Pro 64 bit.

  I installed VMWare converter standalone 4.3.0.292238, to create a copy of the virtual machine to the physical system.

  The first time I run the converter, everything went well - he saw all the partitions on the HARD drive, etc., I changed some options and began the conversion - it ended up OK. Unfortunately, the generated virtual machine could not be started so I deleted all the files and everything started again.

  However, now Converter can't see HDD. On the first screen, when I click «View source détails...» ', he says:

  Source of the disk (s): no info on the disks.

  The strange thing is the first time I run the converter, he saw all the partitions - and I do not have any changes since then.

  Disk partition configuration is odd, there is

  OEM Partition 39 MB

  RECOVERY ~ 800 MB (primary active, system,)

  OS (C:\) (boot, primary)

  2 data partitions (logical drives)

  The first 3 partitions existed, created by Dell. I then shrunk C and added two partitions of data.

  No idea how to solve this problem and to review the HARD drive?

  Thank you

  Try to turn off UAC and run the converter by right click and selection "Run as Administrator".

  André

• 7.4 converter does not recognize the RAW of Nikon J3 files

  Hello

  I downloaded the Converter 7.4 to convert the RAW files from my Nikon J3, but I get "no items matched your search" when I try to select the files I want to convert.

  I tried to download Converter 8.1 as well, just to see if there are some updates that help, but always without success.

  I use the Nikon J3 with a VR 10-100mm lens.

  Does anyone have advice?

  Thanks a lot for your help.

  You can't choose individual files or groups of files in the DNG Converter.  As shown in the command prompt, you can select the folder that contains the raw files.  If you want to convert individual images, you need to drag and drop on the DNG Converter icon.  You may consider to install the DNG Converter 8.1, which is the most recent and will support most of the cameras.