Converter does not reach 1% - "an error occurred during conversion:"converter.fault.ConverterFileFault"

Similar Questions

• I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this. "

  I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this...» He does not drive partition root to copy don't know why his account right there.

  I solved the problem myself... This is because the Version of Vcenter Converter. I'm using Vcenter Converter 5 to P2V a server Linux RHEL5.2, its not supported by Vcenter Converter 5. That of why I've done P2V using Vcenter Converter5.2 and accomplished.

• I run Vista system restore; Msg says could not complete - "an unspecified error occurred during system restore.

  I tried to run the various restore points system restore.  Whenever the result is the same: msg says could not complete - "an unspecified error occurred during system restore.

  Try again in Safe Mode.

  What you are running for an anti-virus? If it's anything other than Microsoft Security Essentials, you may need to temporarily disable.

  If this does not work, you can run it in Mode safe mode with command prompt. Once the command window appears. type %systemroot%\system32\rstrui.exe and press ENTER. The system restore GUI will go up, and you can restore to the date / time selected, or select a time different everything such as running Windows.

  SC Tom

• FAILED: An error occurred during conversion: "native initrd patch supports only Rhel, SLE and Ubuntu.

  When I use the converter P2V a VM to ESXi. The VM OS is SUSE10SP2. the process is 98%, give the error:

  FAILED: An error occurred during conversion: "native initrd patch supports only Rhel, SLE and Ubuntu.

  Source operating system is SLES10SP2

  How to deal?

  The source has been recognized as "suse", not as "sles:

  -->

  Are you sure it's SuSE Enterprise and not Open SuSE? Converter supports SLES only.

  Anyway, you can try a hack to make apparently SLES - change the ' / etc/SuSE-release ' on the source machine (or something similar in the model/etc / *-free) and in the first line add "Enterprise." Then try the conversion again. It's the machine 'lsuseinux90 '.

  Regarding the "opscenter' - version has not been recognized too. The second line in the output file should be something like "VERSION = xx".

  HTH

  Plamen

• P2V error: FAILED: an error occurred during conversion: "2338 ' platform-specific error".

  
  Got this message when trying to P2v of Windows 2003 SP2 server on workgroup.   Using the IP address and a local administrator account to connect to the server and the connection to vCenter to add the VM on the host.  The source server is in a workgroup and vCenter server reside in the field, but I can't do a ping from source to vCenter and source of vConverter server and vice versa.   So, doesn't seem to be a firewall issue or the port number.   My account exist on vCenter data center as an administrator, so I should have no problem with permission.

  FAILED: An error occurred during conversion:
  'Platform-specific error 2338'

  Message to: task: Convert physical machine.

  A note more: host of the ESXi 5.0 that I'm trying to place the virtual machine on a double 10G uplinks defined in Full, while the physical server has a 1 G network card.   It is still duplexing of lag, but do not know if it would be a problem here.  Also, am using vCenter Converter standalone ver5.1 to vCenter on ESXi 5.0 5.0 build 1117897.  Configuration standard vSwitch.

  Have tried to locate what means this error and previously paint white.   Any help is appreciated.

  Thank you very much

  I don't know, ports and/or connection settigs could be changed after P2V previsous... check the connection settings, consult the manual.

• FAILED: An error occurred during conversion: 'unknown exception '.

  Im not able to convert servers more.

  She always be limited to 1% with the error:

  FAILED: An error occurred during conversion:
  'Unknown exception '.

  IM using converter 5.0.0 build-470252 and ESXi v4.1

  Someone who can help?

  Firewall it s ok to p2v?

• FAILED: An error occurred during conversion: "the operation encountered a network error.

  Hello world.

  I used VMware Converter Standalone 6.0 converter Server 2003 on Hyper-V to host ESX to vCenter.

  Hyper-V have IP: 10.132.2.200

  vCenter have IP: 10.132.2.177

  ESXi host have IP: 10.132.2.192

  We have no political firewall for 3 IP this. All ports are open in the firewall.

  But when I convertering 1% who have the error with the State: FAILED: an error occurred during conversion: 'the operation encountered a network error'

  So can you help me fix this case?

  Best regards.
  

  Hello Hongchuong

  It really looks like a secure network communication. You write no firewall blocks but we will go into more detail. The connection must be established from the Hyper-V (10.132.2.200) host to the ESXi (10.132.2.192) host on port 902, as in log lines:

  2015 07-12 T 14: 03:46.634 + 07:00 info vmware-converter-agent [03900] [sub Originator@6876 = task 1] establishment nfc connect to host 10.132.2.192 port 902

  2015 07-12 T 14: 03:47.193 + 07:00 info vmware-converter-agent [03900] [sub Originator@6876 = task 1] disc Sysimgbase_Nfc_PutFile source: Disks\Hyp2K3-Goc_5110F977-7064-4B81-9452-BDAE36EE9C9D.avhd hard E:\MayAo_Hyp\Hyp2K3-LT\Virtual, target disc [Datastore-SAN2] Hyp2K3-HDND/Hyp2K3 - HDND.vmdk

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] NfcNetTcpWrite: bwritten:-1

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] NfcFile_SendMessage [NFC ERROR]: data send failed:

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] the operation encountered a network error - failed to send of data message

  2015 07-12 T 14: 06:45.056 + 07:00 error vmware-converter-agent [03900] [sub Originator@6876 = task-1] Sysimgbase_Nfc_PutFile failed in H2MDiskCloneMgr with nfcError "the operation encountered a network error" (error code: 3)

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] SSL: SSL unknown error

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] NfcNetTcpWrite: bwritten:-1

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = default] [, 0] NfcSendMessage [NFC ERROR]: send failed: NFC_NETWORK_ERROR

  An easy way to try the connectivity is telnet from the Hyper-V host to ESX host on port 902

  I see you have also tried again to destination 10.132.2.191 with the same error.  It is possible that Hyper-V firewall is blocking.

  HTH

  Plamen

• Conversion failed Acronis backup of windows 2003 server to EXsI: FAILED: an error occurred during conversion: "an error of file encountered.

  I am trying to convert an image backup acronis tru to a windows 2003 server to a server esxi virtual computer, a system I had converted previously on 4.x and exsi 5.1 Converter and using the same image and same PC to convert, but now he is unable to 59% with the status:

  FAILED: An error occurred during conversion: "a file error has been detected" and error: error: impossible to clone the C:\Windows\TEMP\vmware-temp\vmware-me\nvdsxwvgwgxyklny\disk-1.vmdk drive on the virtual machine "server."

  Don't know where to go with this.

  Anyone have any ideas?

  Unfortunately, there is a mistake in your image file: 2014-05 - 20 T 20: 41:17.034 - 04:00 [02140 WARNING 'Default'] [, 0] [NFC ERROR] read has no curSector = 588398592, nSectors = 512: failure of a custom of third party library function call: (3116).

  Seems like you need to repair the virtual machine somehow, probably you start it, or use a tool acronis to repair the image.

• Fails at 1% with the error "FAILED: an error occurred during conversion:" "2338' platform-specific error".

  I'm trying to convert a physical Windows Server 2003 Web Edition SP2 with converter (v 5.1) and each time it fails with the error "FAILED: an error occurred during conversion:"2338 ' platform-specific error.

  Some errors in the paper seem to point to a hard disk problem but I defragment the disk and then ran a chkdsk and the disk seems good.

  I appreciate all help.

  Your physical machine cannot access ESX:

  2013-05-25 T 11: 07:26.602 - 05:00 [03816 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 10.1.2.18:902

  You must allow the connection between the physical machine and ESX @ port 902.

  HTH

• FAILED: An error occurred during conversion

  I installed the VMware vCenter Standalone Converter software on our 64-bit system Redhat requiring to be virtualized, then I also installed it on a Windows XP system on the network.  Then, I installed the ESX Server on a third-party system.  Windows system was able to start a conversion of the Redhat box on the ESX Server, however the conversion failed with the message: FAILED: an error occurred during conversion

  How to solve this?  I have attached the logs that were created for this attempt.

  Thank you.

  Same error found in your newspaper, but on another partition (your "/")

  Please refer to this post

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• LabVIEW does not build more: 1 error occurred in UpdateVersionResource.vi

  Hello

  I got a surprise today: I can't create with my Labview 2011 32-bit applications.

  I get the following error, even with projects more simple:

  Error 1 has occurred at UpdateVersionResource.vi-->:Build.vi-> AB_Engine_Build.vi--> AB_Build_Invoke.vi--> AB_Build_Invoke.vi.ProxyCaller AB_EXE.lvclass

  Possible reasons:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.

  Until yesterday, everything worked like a charm. A 64-bit version of Labview still works, but I need to create 32-bit applications.

  My 32-bit Labview installation may be corrupted?

  Bap2703

  Repair the installation of LV has solved the problem.

  

• An error occurred during conversion: the operation encountered a network error.

  Nice day. We are currently trying to convert vm to ESX 3.5 to 5.5 using the media only converter ver 5.5. The conversion with 2% with the operation failure encountered a network error. I then submitted back to the job and selected only 1 drive 5, drive system, and successfully completed. How I will go about to get the 4 remaining disks converted to the already existing virtual machine?

  I don't understand.

  Make another conversion to another virtual machine. Do so without reconfig because it will be without the system volume.

  Then attach disks resulting for the virtual machine from the previous conversion.

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• Many programs does he move not because "Error 1935. An error occurred during the installation of assembly'

  Error 1935. An error occurred during the installation of Assembly

  Microsoft.VC80.ATL.type = "win32", version = "8.0.50727.5592", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture is "amd64"
  It of a long story, but basically will not install Visual C++ 2005, Visual C++ 2008, neither will the window update or standalone. Many other programs like Acrobat will not be installed. giving me the same error. I tried clearing the log and restart, tried in safe mode, tried searching. A lot of people have this problem, few solutions.
  I use Vista Home premium x 64 sp2 and a processor intel T5800 (so it's weird that he said processor = amd 64 Architecture)
  Anyway, any help is appreciated. Looked everywhere, looks like I've tried everything.

  Hello

  This problem may occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Method 1: Follow the steps described in the article below

  Error message when you try to install an Office program: "Error 1935. An error occurred during the installation of assembly component"
  http://support.Microsoft.com/kb/926804
  

  Method 2: Also see the article below for measures to address this problem.

  Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version
  http://support.Microsoft.com/kb/970652

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• a file IO error occurred during access to vmware converter 6

  Hello

  I'm trying to convert a windows 2008 R2 on a virtual computer and using VMware converter v6 system. but the task does not reach 1% with an error a file IO error occurred during access ". 

  Please find the screenshot of the error and logs.

  Any ideas?

  
  

  
  

  Hello

  I solved the problem of the Harbour between the Source and ESXi host close after opening the work of process is Port 902