Converter of element tree with button don't resize with the text of the label

Similar Questions

• Hello! Is it possible to convert a trace made with the Brush tool a blob in a simple brush trace (a simple vector line - not two lines with a filling in between)? Thank you very much for your help!

  Hello!

  Is it possible to convert a trace made with the Brush tool a blob in a simple brush trace (a simple vector line - not two lines with a filling in between)? Thank you very much for your help!

  No, I don't think.

• Why most of the tabs open empty with the label "New tab" and "topic: vacuum ' in the address line to the restart of Firefox since installing Firefox 28?"

  I have a system dual-bootable Windows Vista SP2 and Firefox updated to 28 on both systems. Since the update of the tabs more reopen empty with the label "New tab" and "topic: vacuum" in the address line of Firefox is restarted. The tabs that open correctly seem to be those who in fact, I was at the session of prefious. I can recover the missing tabs using the Session Manager to pick up a previous session, but of course it does not pick up the tabs open in future sessions. It seems that the tabs that I go to the session recovered are saved correctly, as indicated above, but which are not revisited in the context of the use of the session retrieved will drop the URL next time that I open Firefox it again.

  jdgale:

  I don't have the time to do it. However, 29 is just around the corner and we will put in the channel of exit 29, then hope that the issue is not you.

  P.S. I had originally chosen your last answer as the solution that you have migrated more to 29 but it seems that you have taken off. I'll be marking your last answer as the solution so that we can get out of the queue.

• Can I customize the size of the field on a field of choice.  I want to get 10 everywhere and even with the label 1, 2, 3, etc.

  Can I customize the size of the field on the unique choice fields.  I want to get 10 everywhere and even with the label being small, i.e. 1, 2, 3, etc. I can't get to fit on a single line.

  Hi restorechiropractic,

  You can resize a single choice form field by dragging the right side of the form field item. However, even by doing this I was able to get eight choices by line. I don't think that there is no way to work around the limitation of the size of the form.

  Please let us know if you have any additional questions.

  Best,

  Sara

• convert wma to mps with the windows media player 11

  How can I convert wma to mp3 with windows media player 11.

  There are other versions of window media players who had this.

  You can burn a CD of music with WMA files
  and then it RIP with MP3 as a format target.

  Windows Media Player 11 for Windows Vista
  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
  (Expand the section: "Burn audio CD")

  Windows Vista - rip music from a CD
  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD

  Windows Vista - change settings for ripping
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-ripping-music

  Or you can use the following free software:

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your. WMA clips on the main screen...

  Select "all to MP3" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Error on creating a node in a tree with the Oracle ADF

  Hello
  

  I drew a tree with oracle ADf on schema oracle HR and are the layouts of the tree: region, country, location, Department and employee.

  I have a button to create nodes. in the beck of button, I have a class to handle the create action.

  When I want to create a node, the error below is to occur:

  
  

  Cannot create an object of type:java.math.BigDecimal from type:java.lang.String with value:BR
  at com.sun.faces.facelets.el.TagMethodExpression.invoke(TagMethodExpression.java:111)

  
  

  What is the error?

  This error means that you are trying to insert a string value into a bigdecimal object

  in order to check your code when you set values after create

  -Thank you

• You need to replace troublesome tree with the color of the sky surrounding.

  Earlier in the year, I took the photograph of birds.

  Often a part of the bird will be cut in two by a branch that cannot be resolved.

  The thread title basically says it all.

  My goal is to wipe the excess tree twigs/branches and replace it with a more clear sky.

  How would this work with withdrawal in cash?

  Cannot understand it.

  Sort which would accomplish this quest is greatly appreciated.

  It will turn more attention to the bird and not on the parts of the tree around it.

  Thanks in advance.

  Nikon D90 Gent II wrote:

  Often a part of the bird will be cut in two by a branch that cannot be resolved.

  Many times, this can be corrected in Photoshop, but probably not with the tool clone in Lightroom.  Heavy cloning is a job for Photoshop or Elements.  You can make withdrawal of undetectable branch with the Content Aware brush in Photoshop/elements, sometimes doing a little cleaning with the tool clone of Photoshop/Elements.  I removed the necklace and the branches of bugs with very little work.

• Color of text in af:tree with the definitions of two nodes

  Hi all
  
  I use JDev 11.1.1.5.0
  
  I have an af:tree component that got two definitions of nodes (two different iterators). I want to display the data in other colors with other icons etc. According to the definition of node.
  

    <tree IterBinding="OrganizacjeGlowneIterator" id="OrganizacjeGlowne">
        <nodeDefinition DefName="proby.model.views.ElorganizacjeView"
                        Name="OrganizacjeGlowne0"
                        TargetIterator="${bindings.OrganizacjeEditIterator}">
          <AttrNames>
            <Item Value="Kod"/>
            <Item Value="Nazwa"/>
            <Item Value="Typorganizacji"/>
          </AttrNames>
          <Accessors>
            <Item Value="ElorganizacjeView"
                  Label="strukturaOrganizacyjnaPageDef_OrganizacjeGlowne_proby.model.views.ElorganizacjeView_ElorganizacjeView"/>
            <Item Value="StanowiskaUsersView"
                  Label="strukturaOrganizacyjnaPageDef_OrganizacjeGlowne_proby.model.views.ElorganizacjeView_StanowiskaUsersView"/>
          </Accessors>
        </nodeDefinition>
        <nodeDefinition DefName="proby.model.views.StanowiskaUsersView"
                        Name="OrganizacjeGlowne1"
                        TargetIterator="${bindings.StanowiskaUsersEditIterator}">
          <AttrNames>
            <Item Value="NazwaStanowiska"/>
            <Item Value="ImieUsera"/>
            <Item Value="NazwiskoUsera"/>
            <Item Value="EmailUsera"/>
          </AttrNames>
          <Accessors>
            <Item Value="StanowiskaUsersView_2"/>
          </Accessors>
        </nodeDefinition>
      </tree> 

  I wanted to use EL in the Style section in the properties of the af Component Inspector: tree, but I don't know how to get the node current definition name.
  How to change color dynamically based on the current definition of node?
  
  Any help will be appreciated.
  
  Kind regards
  Wojtek.

  Hello

  This EL

  #{node.hierTypeBinding.structureDefName}
  

  Returns the name of the name of the View node and package object

  If you could do

  #{node.hierTypeBinding.structureDefName == "proby.model.views.ElorganizacjeView"? Red: white}

  for the nodes of color code

  Frank

• VMware converter 5.5 failed with the error failed to partition the disk of destination

  I tried to convert the centos linux server physical to virtual. However, I received an error message at 1% as below,

  Error: Impossible to partition the disk of destination.

  FAILED: an error occurred during conversion: "CalculateGPTPartitionLocations failed!"

  
  

  Conversion of GPT partition is available vcenter converter 5.1 and higher, so the GPT partition on the source server will not be a problem.

  Tried several ways as the storage of data changing but still receive the same error message.

  Anyone encounter this before?

  Hello

  Unfortunately there is a bug with Linux P2V Converter when the destination drive is greater than 2 TB (is not whether TPG, it's size). Sorry for the inconvenience.

  The solution would be to reduce the volumes instead of destination and/or their distributed on multiple disks. Another solution would be to leave unchecked high-volume and clone them manually after the conversion.

  Another misfortune is that these workaround solutions are not possible in your case - the root volume occupies approximately 4.3 TB, and the two 'start-up' and '-' are needed to perform a conversion with the reconfiguration.

  The options I can think of are:

  -make a manual P2V, i.e. to create the destination (with partitions, logical volumes and base) computer created and formatted, clone the data (for example the converter uses tar via ssh) and manually configure the virtual machine. The final step is, fixing/etc/fstab, installation of GRUB and rebuild the initrd image

  -install new and copy data

  -Optionally divides the volume of root on the source machine if possible and then convert it. For example, to add a new drive temporarily and move some data so that all volumes become smaller than 2 TB.

  Kind regards

  Plamen

• Currently using Elements 8 with the Organizer, tags, etc. on a Windows PC.  Buy MacBook Pro and want to put 13 and first elements? on my Mac.  How is it difficult to download the old files for MAC?

  Buy Macbook Pro and thinking about buying a package Elements and Premiere Elements for my new Mac.  I've been using 8 items for a few years and several thousand organizes and editing photos on a Windows PC.

  How hard is it to transfer from the PC to the MAC?

  Is my pictures organized with the names of tags etc all back from 8 to 13 new elements?

  Hi Robert

  You can find these links in the transfer of your catalog to your mac:

  Guinot

  Using Backup, Restore to move the catalog | Organizer | Elements 6 or later version

  • Transfer your catalog from Windows to Mac OS
  • Special Notes If you restore a catalog from an earlier version of Photoshop Elements

• Cannot convert win2k server - fails with the boot.ini on the version 3 and 4 error!

  Hello

  I am trying to convert an old win 2000 Server on an esx server, and I'm having a little trouble.  I am trying to run the converter and version 3 already tried with no luck.  On version 3, it manages at the end, think 97% I think and fails.  When I look in the logs of the converter, it seems to resemble a mistake with the boot.ini file.  I left the server for some time and today I have just spotted that the new version of the converter is out and although I'd give it a try.

  Unfortunately, I will have a chance to convert the server again.  It is not the last step.  Ive joined the output of the converter v4 logs.

  Here are the contents of the boot.ini file:

  boot loader

  Timeout = 0

  default = multi (0) disk (0) rdisk (0) partition (2) \WINNT

  "multi (0) disk (0) rdisk (0) partition (2) \WINNT="Microsoft Windows 2000 Server "/ fastdetect

  I would appreciate any advice or tips that I've been struggling with this and I have to get the server took off the old hardware that crack, on which it is running.

  Thanks, much appreciated

  "multi (0) disk (0) rdisk (0) partition (1) \WINNT="Microsoft Windows 2000 Server "/ fastdetect

  Error 1450 (hive loading error: insufficient system resources exist to complete the requested service (1450)) temporary loading hive
  .\vstor2-mntapi10-F1D31D11007E00000000000005000000\WINNT\system32\config\SOFTWARE under the name of the mntApi181664643429986496 key.

  Unable to load the registry hive
  .\vstor2-mntapi10-F1D31D11007E00000000000005000000\WINNT\system32\config\SOFTWARE, error 0x5aa.

  23202 error when you open the software hive

  Cannot read the news of the OS on the system disk: 23202

  You must increase the size limit of the registry on the source. For more details, see: Conversion failed with 1450 PlatformError under Windows 2000 or NT (1005979).

  Please award points if that's the right answer.

• Links created manually on a tree with the Protection of the active Session State

  Friends,
  
  I met a problem and hope you can help me with.
  
  I created a tree using the method described in a book great John & Scott, 'Pro Express Application'. Here is an example of a link stored in my table:
  
  
  access a page, passing it parameters
  
  f? p = & APP_ID.:3: & SESSION.: P3_IDENTIFIER, P3_FAMILY_NAME: & P2_IDENTIFIER, & P2_FAMILY_NAME.
  
  
  When the page is executed that it works as expected. I can expand the tree and go to the page, passing it the parameters if necessary.
  
  However when I turned on the protection of session state these links "handmade" has stopped working. (What I expected because it contains no checksum!).
  
  After some research, I see that I must use APEX_UTIL. PREPARE_URL to generate the URL with a checksum. But that's where I met problems. I can't be able to pass parameter values to the calling page.
  
  The original tree query was:
  
  Select "IDENTIFIER" id,
  "PARENT_IDENTIFIER" the nest,
  Name of "TITLE."
  Link "LINK."
  null a1,
  null A2
  a < table >
  
  Then, I changed the option to use APEX_UTIL. PREPARE_URL:
  
  ....
  APEX_UTIL. Link PREPARE_URL (Link),
  ....
  
  But clicking on the link just gave me a blank page. I then hardcoded just the url in the select statement:
  
  ....
  APEX_UTIL. PREPARE_URL ('f? p ='|: APP_ID |) » : 3 :'|| : APP_SESSION |': P3_IDENTIFIER, P3_FAMILY_NAME: & P2_IDENTIFIER, & P2_FAMILY_NAME. ") link.
  ...
  
  and it works, the page is called, and I can see the values of the parameters passed. But I can't use this method because it is limited to a page!
  
  Finally, I tried to store the parameter values, the parameters and the page number in different columns of the table that the tree came and then bring together them:
  
  ...
  APEX_UTIL. PREPARE_URL ('f? p ='|: APP_ID |': ' | navigate_to_page |': ' |: APP_SESSION |': ' | parameter |': ' | parameter_values link).
  ...
  
  Go to page set: 3
  parameters a value: P3_IDENTIFIER, P3_FAMILY_NAME
  parameter_values has the values of: & P2_IDENTIFIER, & P2_FAMILY_NAME.
  
  He now calls the page, but the values of the parameters have become literals. so, where I would expect an identifier I see & P2_IDENTIFIER Idem for family name.
  
  What I am doing wrong? How can I pass values to my page called using apex_util_prepare_url?
  
  If necessary, the details of my environment are: Apex 3.2.1 Oracle Application Server 10.1.2.3. Database Oracle 10.2.0.3
  
  Thanks in advance for any help you may be able to provide.

  Hello

  & NAME. the rating is not available in SQL, you must either use: NAME or v ('NAME') or nv ('NAME') (for numbers). One of these must be concatenated in your SQL statement in the same way that you did for: APP_ID etc.

  Andy

• normal text with the label in the list view

  I want to show a normal label with text belonging not to the list (ListItemData) and also a title which is ListItemData.title.

  I'm not able to get it working with the code below. IM able to see that the title not the other text.

  It works now. In my original code I gave ListItemComponent type as well as someother name. Change it to the "article", it works.

• Title of the position right at the top with the label.

  Hello

  I use the financial report to create a report with a grid, a label with a title and a logo.

  I would like to give a title to a report, so I created a text box to do. I want to put it on the upper right side of the report. My problem is when I put a vertical and a horizontal position by default, it does not define anything in the report because of the size of my grid.

  Can someone help me on this?

  The solution I found is: Add a label with empty spaces behind my title tag.

  Unfortunately, it makes me manually adjust and when Hyperion not gives me results for an intersection the label is no longer ajust.

• A few multimedia buttons don't work on the Satellite A100-201

  I noticed recently that my play/pause, next track and previous multimedia the track buttons do not work, but made the stop button. I read somewhere that the relocation of the common modules could solve the problem, but on the support page for my model of laptop I don't have a download for the common Module.

  Any ideas what's happening?

  Thank you

  What application is running when you try to use these media buttons?