You need to replace troublesome tree with the color of the sky surrounding.

Similar Questions

• I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem

  I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems

  Friday, October 19, 2012 19:03:30 + 0000, * address email is removed from the privacy * wrote:

  I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems

  Two points:

  1. it is unlikely that your current installation would work if
  you have changed motherboards. You need to reinstall itself.

  2 but you cannot use your current copy of Windows if you change
  motherboards, not even if reinstall you it cleanly. The largest
  disadvantage of an OEM version, is that its license it binds permanently
  the first computer, it is installed on and Microsoft believes that
  If you change the motherboards, another computer. It can never
  legally be moved to another computer, sold or transferred (except with)
  the original computer). If the computer dies or is stolen, your
  license dies with him.

  Ken Blake, Microsoft MVP

• CHKDSK incorrectly replacing invalid security with the default id id

  the last 2 times I had to restart after installing an update windows CHKDSK destroyed my computer when chkdsk incorrectly replacing invalid security with the default id id.  OUCH!

  Whenever I roboot now CHKDSK can go and I don't want to lose my computer time a third and having to reinstall everything again.

  Is there some kind of fix for this?

  I have Windows Vista Ultimate SP2

  Hello JimHarding,

  Response by Sebastien will disable chkdsk to run at startup.

  My concern here is that even after a format and clean install, chkdsk keeps is triggered to run.

  This could be a sign that the hard drive begins to run out.  It is my recommendation that you begin to take a very up-to-date backup of your data very convenient where the disc goes down.

  Best regards

  Matthew_Ha

• Hello, im a student in England, student of architecture. I have the pack student for 12 months and I really need to know my limits with the use, (copyright licensing). I am allowed, except by using my home application to show works that i already have)

  Hello, im a student in England, student of architecture. I have the pack student for 12 months and I really need to know my limits with the use, (copyright licensing). I am allowed, except by using my home application to show works which I have already done (as portfolios) to architectural firms, I intend to request a placement to? also can I post my stuff (already did the work) on my blog or tumblr? I intend not to use for profit/money at all well (if I was I wouldn't ask you this lol). Thank you.

  Hi,

  Please see Licensing FAQ: where can I find the terms of membership and the terms of use?

  Hope that helps!

  Kind regards

  Sheena

• You can have two stored functions with the same name?

  Hi all

  You can have two stored functions with the same name?

  My version of DB - connected to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0

  Thank you.

  You can have the same name as long as they are within a package and with different parameters

  create or replace package test_pkg

  as

  function my_func (p1 in number)

  return number;

  function my_func (at number p1, p2)

  return number;

  end test_pkg;

  /

  create or replace package body test_pkg

  as

  function my_func (p1 in number)

  Return number

  as

  Start

  return 0;

  end;

  function my_func (at number p1, p2)

  Return number

  as

  Start

  return 0;

  end;

  end test_pkg;

  /

• Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  You say Apple your wishes on the link below.

  http://www.Apple.com/feedback/

• "The server has encountered an error" when you want to send a message with the form.

  Hello

  "The server has encountered an error" when you want to send a message with the form.

  With the businesscatalyst site, the message is well received by the recipient as the site FTP host, the previous message is displayed.

  What code do I add and where?

  In advance, thank you.

  Please, answer in french!

  Hello ScratchMaster,

  Please see the link below, I'm sure that you will find it useful.

  https://forums.Adobe.com/docs/doc-3581

  Kind regards

  Vivek

• I need to download photoshop test with the support of middele is to write in Arabic

  I need to download photoshop test with the support of middele is to write in Arabic

  Hello

  Please see Photo editing software | Download the free trial version Photoshop CC

  Hope that helps!

  Kind regards

  Sheena

• C310A: is the slimline 564 black cartridge? You need to replace the 364-setup. 364XL is too fat.

  My C310A has worked perfectly as a network printer and photocopier
  13 months with a heavy workload on the side of the copy.  I had bought a
  number of packs of cartridges HP original and replaced a couple.  The
  Install black cartridge is still there but with very little ink in there then
  When photocopying started to fade today I went to install a new 364
  cartridge.  Blacks only I have are all XL which does not fit
  in the installation location.  Were included in the packs I bought three CYM
  Slimline cartridges and a black XL.  I replaced the cartridge XL and
  then put the black original installation in the K Groove to get things
  work.  Were reported as 'missing or damaged '.  Color copy
  has worked as before with virtually no black which implies that XL Black
  was ignored.  So I tried to copy 'black', but which is released
  empty.  Can I threw a black XL perfect condition.

  I have two questions, at least.  The XL slot is black only
  impression or can it provide ink for the printing of color as well?  Secondly,.
  where the United Kingdom can you get 364 slimline black cartridges?  All the
  online stores seem to stock XL only Variant.

  In response to myself.  Had a closer look at available online thecartridges and find a supplier for the black photo.  There the black symbol of the can on it.  Meanwhile, I reinstalled the new black print cartridge (the wideer one) and was able to print a complete report.  Tried a color photocopy and black came fine, which seems to show that the black cartridge IS used in photo printing.

  Again, I am impressed.  This is a fantastic printer.  I've always liked HP (16 years and a half dozen printers) and particularly for their copy Linux supports.  They keep HPLIP right up-to-date.

  The moderator please mark this as resolved?

• You will need to insert update column with the username?

  Hi all
  
  I'm new to this forum of the apex. New to apex as well.
  
  My question is do we have a form and a single column is editable by the user. whenever an update to this column, I need to write their name in the update column.
  
  I heard that we can do with trigger using the variable app_user. But in our project, they made authentication ldap for this form and when an employee login with their company login id they can see only this form of apex. no other option.
  
  In the same form, they were able to show the user name. I checked how they did it. they used * & user * variable for this. , It makes sense for you gentlemen?
  
  all I have to do is insert this & user in the column value.
  
  How to do this. I'm started working in the apex for the past four days alone. willing to bare with me if im a very stupid question.
  
  Thank you
  knani
  
  PS: I know that what im asking is the user name for the Web page the user name of the apex.
  
  Published by: kart on May 26, 2010 11:45

  Hello

  You can use: APP_USER substitution string.
  If you like to use that in the syntax of database trigger is v('APP_USER') for example

  :NEW.CHANGED_BY := NVL(v('APP_USER'), user);
  

  BR, Jari

• I have a TravelMate 6592 G and you need to replace the video card.

  The original card is ATI Radeon X 2300 - H, which is no longer manufactured. Can someone tell me what the map is compatible now?

  Hello

  Unfortunately, you have a discrete graphics (Mobility Radeon HD 2400 XT) on the motherboard.

  This means that you need a new motherboard. It is not a graphics card for this model.

  Note:

  P/N: LX. TNE0Z.107

  Model: TravelMate 6592 G-602G16n

• TDMS replace specific fields with the new string data

  Hello

  Wonder if someone could advise a more easy, more clean solution or I may end up making a big mess on my diagram!

  I use DaqmxConfigureLogging.vi to write data in the .tdms and this file everything works. Unfortunately, this vi affects physical names such as Dev1/ai0 channel names in Journal of root and group of tdms files.

  I would like to read individual fields where they are written and replace them with the names of channel. The location of these channel names is fixed on the tdms file.  However, I noticed using file i/o functions, such as file open/close/set position could not work, because these files do not seem to recognize the .tdms file. And it is not all fields tdms functions you want the value of the positions on sheets of root/channel files tdms and read fields desired as string data.

  Any suggestions? I can miss something quite simple!

  crossrulz wrote:

  k waris wrote:

  "In fact, it uses some names you give the channels and groups.

  I use Dev1 / ai0:15 connect all 16 channels. Unfortunately if using 'name to assign' entry will not do the job in my case!

  Of course, it will be.  Use a loop FOR with DAQmx channel create to create each channel and give them a name.

  Just to clarify what I meant here...

  

• error message "Windows Explorer has encountered a problem and needs to close" on click with the right button in my computer

  I had this problem for awhile now.  After I receive and send the error report my computer is blocked and I have to finish by WTM. I tried to start in safe mode and it was ok there and when I restarted in normal mode it was ok for the rest of the day, but when I put the computer today the problem reappeared. Dr. Watson is also sometimes with an error message.

  I am running XP with MS and updates.

  Would appreciate some advice.

  Chris

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song...).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5 at a time), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know that an extension of this group of 3-5 is the culprit in order to start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.  In this way, you can switch back and forth, enabled to be sure, you have the right extension under control.

  Disable them one at a time until your right click on do not generate an error, then restart and test again to make sure the changes 'stick '.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• Trying to save the Grand Theft Auto IV game and needed an upgrade to record with the error message: Windows live update failed 0 x 80080005

  Original title: games for windows live update failed 0 x 80080005

  Hello!

  I had to GTA IV the first time when I wanted to save my game play. I'm logged into my account and he said that an upgrade is needed to save the progress. So I tried to put up-to-date, but after 10 seconds, he said that a problem has been found. I need to check my internet connection (no problem). So for support windows if the problem remained. On the note it says 0 x 80080005 I don't know what that means.
  Please help, and I'll hope you'll know the answer.

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand you are trying to save the game Grand Theft Auto IV and needed an update to register with windows live error update failed 0 x 80080005. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Please follow the steps described in the links below and check the issue:

   

  Games for Windows - LIVE: how update by using Windows Update:

  http://support.Microsoft.com/kb/959864

   

   

  'Download failed' error:

  http://www.Microsoft.com/games/en-us/support/pages/downloadFailed.aspx

   

   

  Games for Windows LIVE errors:

  http://support.Xbox.com/en-us/Games/PC-games/games-for-Windows-errors-messages

   

   

  For more information:

   

  Xbox articles:

  http://forums.Xbox.com/xbox_forums/b/default.aspx

   

   

  Contact Xbox support:

  http://support.Xbox.com/en-us/

   

   

  Xbox LIVE Support:

  http://support.Xbox.com/en-us/Xbox-Live/browse?XR=shellnav

   

   

   

  I hope the above information helps you and your response is very important for us to ensure a proper resolution.

• Error on creating a node in a tree with the Oracle ADF

  Hello
  

  I drew a tree with oracle ADf on schema oracle HR and are the layouts of the tree: region, country, location, Department and employee.

  I have a button to create nodes. in the beck of button, I have a class to handle the create action.

  When I want to create a node, the error below is to occur:

  
  

  Cannot create an object of type:java.math.BigDecimal from type:java.lang.String with value:BR
  at com.sun.faces.facelets.el.TagMethodExpression.invoke(TagMethodExpression.java:111)

  
  

  What is the error?

  This error means that you are trying to insert a string value into a bigdecimal object

  in order to check your code when you set values after create

  -Thank you