Converts the audio signals of the mydaq in discrete values

Similar Questions

• BluRay HDMI'd to the TV, TV audio digital-to-analog converter: no audio signal to the receiver

  I have a BluRay BDP-3100 connected to the TV via HDMI.

  I can hear audio (DVD, Netflix, etc.) very well just the TV speakers.

  Have TV audio out audio output digital (optical) > (RCA) digital audio converter > receiver for playing on the sound system.

  I get no audio through stereo receiver, DVD or Netflix, only a heartbeat noise. Funny thing is that I can hear YouTube with this configuration only.

  All the other audio (cable, Xbox) works very well with TV audio out through receiver converter.

  HEY Santa, thank you.

  Steve

  Try to go to the Audio settings of the Blu - ray player. Replace the Digital Audio output PCM and BD Mix Audio setting to Off.

  1. Press button on the supplied remote control.

  2. go in settings (toolbox icon) by pressing the left arrow button.

  3. press the down arrow button and select Audio settings.

  4. Select the Digital Audio output and set it to PCM.

  5. Select the Audio BD mixture setting and place it on the off position.

  If my post answered your question, please mark it as "accept as a Solution.

• How Photoshop converts the RGB 16-bit values to 15-bit and 8-bit?

  Can someone please help me understand what rounding of diet or another algorithm is used when Photoshop reduced a 16-bit color 8-bit?

  For example, the two colors (was and B) are the colours of 16-bit swatch taken directly from a file of the ACO:

  A16 = (61603, 60948, 58982)

  B16 = (58326, 57015, 52428)

  Photoshop displays the values of "16-bit" (acutally 15 bits) as well:

  A15 = (30802, 30474, 29491)

  B15 = (29163, 28508, 26214)

  It seems that the 15-bit values are the result of the division by two and rounded to the nearest integer.

  With 8-bit, it's another story although:

  A8 = (240, 237, 229)

  B8 = (222, 227, 204)

  Now, if we divide the 16-bit value by 256, the following:

  A8_float = (240.6, 238,1, 230,4)

  B8_float = (227,8, 222,7, 204.8)

  It's a similar story during the allocation of the 15 by 128 bit values. No system rounding or truncation will get the same answers as Photoshop for 8 bit I see. What I can't work, it's how Photoshop calculates these figures. It's the division of integers, floating point division with rounding or truncation? I'm puzzled. Help, please.

  -> range 32768-65535: (32768 * x + 32767) / 65535

  Not quite dividing by 2, otherwise you miss the white point.

  32768-> 255 range: (255 * x + 16384) / 32768

  With the exception of dithering, it is all simple mathematics.

• VI to convert input signals NI 9402 in a RPM value, based on the frequency of the pulses

  Hello

  I'm looking for a VI convert an input signal NI 9402 in a RPM value, based on the frequency of the pulses. Is there such a thing that exists in the library of national instruments?

  I run LAbview 2014 integrated control and monitoring on on a cRIO 9802 high performance integrated system with NEITHER 9402, 4 channels, 50 LV, LV TTL Module input/output digital, ultra high speed digital i/o for the cRIO module.

  Any help would be greatly appreciated.

  The easiest way is to use the FPGA to get the time between the edges of your pulse increase (shift registers to maintain the current situation and the time will be necessary).  This will give you the period.  If it's a single pulse per turn, then the number of laps is just 60/T, where T is the time in seconds.

• Count the number of 1 is present in digital waveforms obtained by converting the pulse signals.

  Hello

  I use Analogtodigital.Vi to convert the pulse of the sequences in digital.signals.I am able to get the representation of digital waveforms of impulses.

  But how to count the number of 1 is present in the converted digital waveform. I want to count the number of 1 is present in the digital waveform converted.

  Thanks in advance.

  Have you tried the block scheme of similar to the Digital.vi of opening?

  It creates an array 2D uncompressed 1 and 0, which is the binary 16 bits A/D conversion of each element in the array Y of the input waveform. You can use the DWDT digital Array.vi Boolean to convert a 2D Boolean table. Then convert Boolean values to 1.0 and summarize the array of integers. The sum must be the number of 1 bits in the digital waveforms.

  Lynn

  Note: The VI attached is saved in version 8.6. When I have it saved for the previous Version a warning was generated about the possible differences in the versions. Let me know if it doesn't work, and you are using which version of LV.

• Could someone tell me how to convert the digital signals in table 1 d of digital waveforms

  I use 9474 for drving an engine. for that I have uses 2 ports - to activate and another for running. These signals in the form of Boolean values.  I am to convert these signals to a table and since iam doing a digital waveform. but when iam connecting these to the module 9474, it show an error "source is a digital waveform and sink is 1-d array of digital waveform... any body can help in these issueee please...»

  Pop - up on the thread and choose Insert...

  Build the table.

  Ben

• How to convert the pulse signal line single layer

  Hello

  I tried to create a VI that will allow me to convert a pulse signal (generated by a tachometer) in a line single layer, indicating that a revolution succeeded. I would like to overlay this line on other signals generated.

  I am able to detect the falling edge of the signal, but I could not make a suitable line. I tried to create a new waveform, and juggle the markers, but no method worked for me.

  Does anyone have ideas for a good way to do this?

  Below is my test VI.

  

  Make the second vertical lines style trace (trace style: no points, no interpolation, fill - inf). a NaN whener you don't want a power cable and a '+ inf' when you want a vertical line.

  Here's a simple example:

  

• Where can I find the best free software to convert files audio .wma files .mp3 to my player?

  I have a MP3 player that I want to use to read audio books and that he cannot find a conversion program easy, good to convert .wma to .mp3 and then files files transfer to my MP3 player.  Help, please.

  Hello

  Welcome to the Microsoft community!

  I suggest you to search online using your favorite search engine to see what is the best free software to convert files audio .wma MP3 files for your MP3 player.

  THIRD PARTY LINK WARNING

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

  If you need more help on this question or if you have questions about Windows let us know.

  We would be happy to help you!

• There is no audio signal of chronology in PREL12 the .m2ts files

  Windows 7-64, first 12 items (64 and 32 - the same result)

  Panasonic SC - 920 X camcorder, recoding format 1920x50p + DD5.1

  1. If I just copy the files .mts from an SD card into the PC and import it into PREL then there no problem with audio. It is to play the preview and timeline window.

  But in this case, I have a problem with the long record - camcorder breaks large files.

  So I use the SD instead of the simple copy import.

  2. the import of the SD using PREL12 (Get media of-> cameras Flip, AVCHD,...). In this case I get at disk .mts files and no audio timeline with these files. But in all other programs, these files are played with audio.

  3. import the SD using Panasonic HDWriter program. In this case, I get .m2ts files (and some metadata files.). These files read normally (with audio) in any player and the program I have (WMP, MPC, Corel Video Studio Pro X 6 etc.). Except the chronology of the PREL12.

  There is no audio signal of PREL timeline. And at the same time there is audio of the preview in the same PREL window (after double clicking on the item in the active project)!

  There is no yellow bar above these clips. Project settings - 1980x50p PAL AVCHD

  How to get audio of time?

  dik07

  Something for you to try.

  The quick and very rough to solve this way...

  Expert workspace...

  Before you import your media into the project, set the predefined project manually to

  PAL

  AVCHD

  Full HD 1080i25 5.1 channels

  To manually set the project preset

  • Open the project in the workspace Expert and go to file menu/new project and change the settings.
  • In the settings, set the project preset to match the properties of the source media. OK to get out of there.
  • In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.

  And then import your source files in the project by the different ways you have tried and found not to work for your application.

  If it works, then the real solution...

  Premiere Elements does not come with a preset project to PAL AVCHD AVCHD 1080 p 50 5.1 channels.

  But, you can create one for use if gross suggests you need a project that is pre-configured with 5.1 channels included in its description. Please see details

  RTA Premiere Elements troubleshooting: PE11: export a file 1080 p 50 or 1080 p 60 with Audio to 5.1 channels

  Let know us the results and then we can decide what then.

  Thank you.

  RTA

• iMovie imported my clips but did not convert the

  Hi all.

  Recently, I imported a whole bunch of my GoPro clips in iMovie. They seemed imported ok, but when I drag them from the event in the project and then decide I want to make adjustments of speed in clip adjustments, it is said that the clip was not converted - see attached screenshot.

  In addition, displaying some of the clips, some of them do not see smooth, the video will be trolling heavily but audio will continue. This will be resolved once that I convert the clip but it's a bit frustrating when I have to drag the item from the window of the event in the project window and then convert it just to see if I want to use it or not.

  The clips can be converted singularly but takes a while. I was wondering if there was a way to conversion in bulk the clips so that I could just let it run all night and she'll do all clips at once. I have searched through the toolbars, but found nothing. It is mostly just then preview or watch clips or if I want to make adjustments of speed/run the clip towards reverse.

  I made a video in iMovie earlier in the year with images of the GoPro (from the GoPro even) and had no problems with the conversion of import or clip.

  Any help anyone could give me would be much appreciated.

  PS if possible, I don't want to reimport them since I already moved half the clips I want in my project.

  Additional information:

  Computer: MacBook Pro 13 ", about six years, running the Version OS X El Capitan 10.11.4

  version of iMovie: iMovie ' 09, version 8.0.6 (821)

  GoPro used: GoPro Hero4 Silver

  

  I made a video in iMovie earlier in the year with images of the GoPro (from the GoPro even) and had no problems with the conversion of import or clip.

  Were then automatically using El Capitan, or a previous operating system?

  There are many reports on these forums that suggest that worm iMovie 8 and 9 are not compatible with El Capitan.OK on previous operating systems

  Even if you convert the clips there may be other issues.

  The recommendation, if you have problems with the 8 CBS NVA, is to download iMovie ver 10 from the App Store.

  It is not free for users of version 8 it is for users of version 9.

  Version 10 is quite different from 8 and 9 so a bit of a learning curve.

  Do a search here for compatibility with El Capitan iMovie for more information and look for entries of GeeD is the current master

  for iMovie 10 and how to get your events and projects in iMovie 8/9 to iMovie 10.

• How to open or convert the .avi file on old mac running OS.10.6.8?

  How to open or convert the .avi file on the old mac running OS.10.6.8.  We tried downloading several conversion programs as well as programs that run .avi, but everyone's message could not be opened on the mac or require a fee.  Anyone able to fix it.  We have great audio video file we need to convert.

  Try to use MPEG Streamclip; You can be told to install Perian or another component, or who does not open the AVI file. AVI is a container, not a format; no single component or codec will open all reviews, and some cannot be played or converted in Mac OS X.

  (142484)

• Convert the waveform (DBL) to a cluster of 2 elements

  Hello

  Can someone help me to convert the data type of waveform (DBL) to a cluster of 2 elements (X, Y). I found a few examples online, but I get an error when I wire everything together. I use VI of Tektronix to acquire a signal of channel 2 of my noculars, which I am able to do, but now I want to convert this data to a cluster so that I can use it for an existing application to acquisition. I have attached my VI version 8.2.

  1Thanks

  The is easy since it is part of the waveform data type.  The X, you will need to calculate based on the dt by using a loop FOR.

  

• convert the format of output in text buffer

  I received an ASCII output a signal source Analyzer I would like to convert in a readable text format. In the vi attached (LV2009) chain of read buffer control contains the data that I get and I put a free label on the Panel before which contains the expected results. When I have catalogued in a single table, I had the right values, but every 3 values that I have received a number that probably is a conversion of a carriage return character. I could sort the table to convert the number to a string and each third \r\n value but it seems a silly way to solve this problem. There must be an easy way to do it. Any idea?

  Ben64

  Like a little more fun, I initially wanted to do this:

  

  A bit embarrassing that the function to build matrix does not deal with SGL, but for some reason any LV9 it throws at you:

  

  Consider this my report to Technical Support OR.

  Adding a constraint to DBL before building matrix kind of defeated the purpose, but solves the problem.

• Error: "Quicktime may need to be installed in order to display or to convert the video in Adobe Media Encoder.»

  I'm trying to export a Flash video. I get this message

  "Quicktime may need to be installed in order to display or to convert the video in Adobe Media Encoder."

  Despite the error message, it "seems" and spits a mov file, but only the audio crosses (the video is all black).

  I use Flash Professional CC, but older versions (CS6) seem to have the same problem.

  Some tips on how to export as swf no Flash?

  Thank you!

  I would still choose not to send the video through Adobe Media Encoder, which can stop the error message.

  What is your scenario? Video export cannot export integrated H.264 video. If you do animation and audio to go on top an existing H.264 format video, export, but make sure the alpha box set when exporting. Then, you can combine the old movie H.264 with the animation and the sound you made in Flash.

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.